Leaked source code of windows server 2003
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

493 lines
18 KiB

#ifndef _WINSCNST_H_
#define _WINSCNST_H_
/*
macros
*/
//
// Default values for the various time intervals
//
#define FORTY_MTS 2400
#define TWO_HOURS 7200
#define TWO_DAYS (172800)
#define ONEDAY (TWO_DAYS/2)
#define FOUR_DAYS (TWO_DAYS * 2)
#define SIX_DAYS (TWO_DAYS * 3)
#define EIGHT_DAYS (TWO_DAYS * 4)
#define TWELVE_DAYS (TWO_DAYS * 6)
#define TWENTY_FOUR_DAYS (TWO_DAYS * 12)
#define WINSCNF_TIME_INT_W_SELF_FND_PNRS TWO_HOURS
//
// Minimum number of updates that must be there before a push notification is
// sent
//
#define WINSCNF_MIN_VALID_UPDATE_CNT 20 //the minimum no of updates
//after which a notification
//can be sent. Adjustable
//via the registry
//
// This is the minimum valid Rpl interval. All the scavenging time intervals
// are derived from it.
//
// refer WAIT_TIME_BEFORE_EXITING in rplpush.c
//
#define WINSCNF_MIN_VALID_RPL_INTVL (600) // 10 mts
// this is the minimum valid consistency check interval between the last time
// consistency check finished and the next one starts.
#define WINSCNF_MIN_VALID_INTER_CC_INTVL (3*60*60) // 3 hours.
//
// default name of the db file that will contain the name-address mappings
//
#define WINSCNF_DB_NAME TEXT(".\\wins\\wins.mdb")
#define WINSCNF_DB_NAME_ASCII ".\\wins\\wins.mdb"
//
// NOTE NOTE NOTE
//
// If you change this define to a string that does not have an unexpanded
// string of the form %<string>% make a corresponding change in
// GetNamesOfDataFiles() in winscnf.c.
//
#define WINSCNF_STATIC_DATA_NAME TEXT("%SystemRoot%\\system32\\drivers\\etc\\lmhosts")
//
// Max. size of a file name
//
#define WINS_MAX_FILENAME_SZ 255
//
// Max. size of a line
//
// Used in winsprs.c
//
#define WINS_MAX_LINE_SZ 80
//
// names of values stored under the Parameters key for WINS configuration
//
#if defined(DBGSVC) && !defined(WINS_INTERACTIVE)
#define WINSCNF_DBGFLAGS_NM TEXT("DBGFLAGS")
#endif
#define WINSCNF_FILTER1BREQUESTS_NM TEXT("Filter1BRequests")
#define WINSCNF_ADD1BTO1CQUERIES_NM TEXT("Prepend1BTo1CQueries")
#define WINSCNF_LOG_DETAILED_EVTS_NM TEXT("LogDetailedEvents")
#define WINSCNF_REFRESH_INTVL_NM TEXT("RefreshInterval")
#define WINSCNF_INIT_CHL_RETRY_INTVL_NM TEXT("InitChlRetryInterval")
#define WINSCNF_CHL_MAX_RETRIES_NM TEXT("ChlMaxNoOfRetries")
#define WINSCNF_TOMBSTONE_INTVL_NM TEXT("TombstoneInterval")
#define WINSCNF_TOMBSTONE_TMOUT_NM TEXT("TombstoneTimeout")
#define WINSCNF_VERIFY_INTVL_NM TEXT("VerifyInterval")
#define WINSCNF_DB_FILE_NM TEXT("DbFileNm")
#define WINSCNF_DB_FILE_NM_ASCII "DbFileNm"
#define WINSCNF_STATIC_INIT_FLAG_NM TEXT("DoStaticDataInit")
#define WINSCNF_INIT_VERSNO_VAL_LW_NM TEXT("VersCounterStartVal_LowWord")
#define WINSCNF_INIT_VERSNO_VAL_HW_NM TEXT("VersCounterStartVal_HighWord")
#define WINSCNF_BACKUP_DIR_PATH_NM TEXT("BackupDirPath")
#define WINSCNF_PRIORITY_CLASS_HIGH_NM TEXT("PriorityClassHigh")
#define WINSCNF_MAX_NO_WRK_THDS_NM TEXT("NoOfWrkThds")
#define WINSCNF_INIT_TIME_PAUSE_NM TEXT("InitTimePause")
#define WINSCNF_CLUSTER_RESOURCE_NM TEXT( "ClusterResourceName")
//
// To allow WINS to revert back to 351 jet and db
//
#define WINSCNF_USE_351DB_NM TEXT("Use351Db")
#define WINSCNF_USE_4DB_NM TEXT("Use4Db")
#if MCAST > 0
#define WINSCNF_USE_SELF_FND_PNRS_NM TEXT("UseSelfFndPnrs")
#define WINSCNF_SELF_FND_NM TEXT("SelfFnd")
#define WINSCNF_MCAST_TTL_NM TEXT("McastTtl")
#define WINSCNF_MCAST_INTVL_NM TEXT("McastIntvl")
#endif
#define WINSCNF_WINS_PORT_NO_NM TEXT("PortNo")
// persona grata/non-grata registry names have to be ASCII. The registry is queried
// through RegQueryValueExA() calls (see GetOwnerList() from winscnf.c)
#define PERSMODE_NON_GRATA 0
#define PERSMODE_GRATA 1
#define WINSCNF_PERSONA_MODE_NM "PersonaMode"
#define WINSCNF_PERSONA_NON_GRATA_NM "PersonaNonGrata"
#define WINSCNF_PERSONA_GRATA_NM "PersonaGrata"
#if PRSCONN
#define WINSCNF_PRS_CONN_NM TEXT("PersistentRplOn")
#endif
//
// Spoof reg/ref
//
#define WINSCNF_BURST_HANDLING_NM TEXT("BurstHandling")
#define WINSCNF_BURST_QUE_SIZE_NM TEXT("BurstQueSize")
// to enable round-robin list of 1C member addresses
#define WINSCNF_RANDOMIZE_1C_LIST_NM TEXT("Randomize1CList")
//
// NOTE NOTE NOTE
//
// This should never be set to FALSE in the registry unless we notice
// a major bug in WINS that is resulting in replication to stop. This
// parameter is a hatch door at best to get around an insidious bug
// that may escape us during our testing -- Good insurance policy
//
#define WINSCNF_NO_RPL_ON_ERR_NM TEXT("NoRplOnErr")
//
// FUTURES - remove when JetBackup is internationalized. Also, update
// WinsCnfReadWinsInfo.
//
#define WINSCNF_ASCII_BACKUP_DIR_PATH_NM "BackupDirPath"
#define WINSCNF_INT_VERSNO_NEXTTIME_LW_NM TEXT("WinsInternalVersNoNextTime_LW")
#define WINSCNF_INT_VERSNO_NEXTTIME_HW_NM TEXT("WinsInternalVersNoNextTime_HW")
#define WINSCNF_DO_BACKUP_ON_TERM_NM TEXT("DoBackupOnTerm")
#define WINSCNF_MIGRATION_ON_NM TEXT("MigrateOn")
#define WINSCNF_REG_QUE_MAX_LEN_NM TEXT("RegQueMaxLen")
//
// Names to use in the registry for values of the PUSH/PULL sub-keys
//
#define WINSCNF_ADDCHG_TRIGGER_NM TEXT("RplOnAddressChg")
#define WINSCNF_RETRY_COUNT_NM TEXT("CommRetryCount")
//
// Under IP address of a Push pnr
//
#define WINSCNF_SP_TIME_NM TEXT("SpTime")
#define WINSCNF_RPL_INTERVAL_NM TEXT("TimeInterval")
#define WINSCNF_MEMBER_PREC_NM TEXT("MemberPrecedence")
//
// Under IP address of a Pull pnr
//
#define WINSCNF_UPDATE_COUNT_NM TEXT("UpdateCount")
//
// Both pull/push pnr
//
#define WINSCNF_ONLY_DYN_RECS_NM TEXT("OnlyDynRecs")
//
// Value of the PULL/PUSH key
//
#define WINSCNF_INIT_TIME_RPL_NM TEXT("InitTimeReplication")
//
// Value of the PUSH key
//
#define WINSCNF_PROP_NET_UPD_NTF TEXT("PropNetUpdNtf")
//
// Indicate whether propagation is to be done or not
//
#define DO_PROP_NET_UPD_NTF TRUE
#define DONT_PROP_NET_UPD_NTF FALSE
//
// if "OnlyWithCnfPnrs" is set to TRUE, replication will be performed only
// with those partners that are listed under the Pull/Push key. If not
// set to TRUE, replication can be initiated even with unlisted partners
// as a result of administrative action or as a result of receiving an
// update notification
//
#define WINSCNF_RPL_ONLY_W_CNF_PNRS_NM TEXT("RplOnlyWCnfPnrs")
//
// This DWORD can be under the Partners, Partners\Pull,
// Partners\Push keys or under a partner's ip address key. If it is in more
// than in one place in the key heirarchy, the lower one overrides the upper
// one.
//
// Each bit indicates the kind of replication we want/don't want.
// If no bit is set or if this parameter is not defined, it means
// replicate everything (unless WINSCNF_ONLY_DYN_RECS_NM is defined - ideally
// that should be represented by a bit in this DWORD but that is river under
// the bridge and I don't want to get rid of that parameter since folks are
// used to it, it being in the doc set and all). Currently the following is
// defined
//
// All replication under the constraint of WINSCNF_ONLY_DYN_RECS_NM if defined
//
#define WINSCNF_RPL_DEFAULT_TYPE 0x0
//
// LSB - Replicate only the special group names (special groups - domains and
// user defined special groups)
//
#define WINSCNF_RPL_SPEC_GRPS_N_PDC 0x1
#define WINSCNF_RPL_ONLY_DYN_RECS 0x80000000
#define WINSCNF_RPL_TYPE_NM TEXT("ReplicationType")
//
// Path to log file
//
#define WINSCNF_LOG_FLAG_NM TEXT("LoggingOn")
#define WINSCNF_LOG_FILE_PATH_NM TEXT("LogFilePath")
#define WINSCNF_MAX_CHL_RETRIES 3 //max. # of retries RFC 1002
//page 83
#if 0
#define WINSCNF_CHL_RETRY_INTERVAL 250 //Time interval (in msecs)
//between retries -- RFC 1002
//page 83
#endif
#define WINSCNF_CHL_RETRY_INTERVAL 500 //Time interval (in msecs)
#define WINSCNF_PROC_HIGH_PRIORITY_CLASS HIGH_PRIORITY_CLASS
#define WINSCNF_PROC_PRIORITY_CLASS NORMAL_PRIORITY_CLASS
#define WINSCNF_SCV_PRIORITY_LVL THREAD_PRIORITY_BELOW_NORMAL
//
// The Retry timeout is kept as 10 secs. It will be typically << the time
// interval for replication, allowing us to retry a number of times
// prior to the next replication cycle.
//
//
// The Retry Time Interval is not used presently. We are using the
// replication time interval for retries. This makes things simpler
//
#define WINSCNF_RETRY_TIME_INT 10 //time interval for retries
//if there is a comm failure
#define WINSCNF_MAX_COMM_RETRIES 3 //max. number of retries before
//giving up trying to set up
//communications with a WINS
//
// Precedence of remote members (of special groups) registered by a WINS
// relative to the same registered by other WINS servers (used during
// pull replication)
//
// Locally registered members always have high precedence
//
// Make sure that WINSCNF_LOW_PREC < WINSCNF_HIGH_PREC (this fact is used in
// nmsnmh.c- UnionGrps())
//
//
#define WINSCNF_LOW_PREC 0
#define WINSCNF_HIGH_PREC 1
//
// After replication with a WINS has stopped because of persistent
// communication failure (i.e. after all retries have been exhausted),
// WINS will wait until the following number of replication time intervals
// have elapsed before starting the retries again. If replication
// got stopped with more than one WINS partner with the same time interval
// (for pulling from it), then retry will be done for all these WINS when
// it is done for one (in other words, resumption of replication for a WINS
// may happen sooner than you think).
//
// We need to keep this number at least 2 since if we have not been able to
// communicate with the WINS server for WINSCNF_MAX_COMM_RETRIES times
// in the past WINSCNF_MAX_COMM_RETRIES * replication interval for the WINS,
// then it is highly probable that the WINS server is down for good. We
// retry again after the 'backoff' time. Hopefully, by then the admin would
// have corrected the problem. Now, it is possible (unlikely though) that
// the WINS server happened to be down only at the times this WINS tried to
// contact it. We have no way to determine that.
//
//
// This can be made a registry parameter. This can be called the sleep time
// between successive rounds of retries.
//
#define WINSCNF_RETRY_AFTER_THIS_MANY_RPL 2
//
// if the time interval for periodic replication with a partner with which
// a WINS server has had consecutive comm. failures is more than the
// following amount, we don't back off as explained above
//
//
#define WINSCNF_MAX_WAIT_BEFORE_RETRY_RPL ONEDAY //1 day
//
// The max. number of comcurrent static initializations that can be
// happening. These may be due to commands from the admin. tool or
// due to registry notifications.
//
#define WINSCNF_MAX_CNCRNT_STATIC_INITS 3
//
// No of records to handle at one time (used by the scavenger thread). This
// number determines the size of the memory block that will be allocated
// by NmsDbGetDataRecs().
//
//#define WINSCNF_SCV_CHUNK 1000
#define WINSCNF_SCV_CHUNK 3000
//
// defines
//
//
// Refresh interval - time period after which the state of an ACTIVE entry in
// the db is set to NMSDB_E_RELEASED if it has not
// been refreshed
//
#define WINSCNF_MIN_REFRESH_INTERVAL FORTY_MTS
#define WINSCNF_DEF_REFRESH_INTERVAL SIX_DAYS //FOUR_DAYS
#define REF_MULTIPLIER_FOR_ACTIVE 2
//
// The Tombstone Interval (the interval a record stays released) should be
// a multiple of the RefreshInterval by at least the following amount
//
// With 2 as the value and refresh time interval being 4 days, TombInterval
// is max(8 days, 2 * MaxRplInterval) i.e at least 8 days.
//
#define REF_MULTIPLIER_FOR_TOMB 2
//
// Challenge Retry interval
//
#define WINSCNF_MIN_INIT_CHL_RETRY_INTVL 250
#define WINSCNF_DEF_INIT_CHL_RETRY_INTVL 500
//
// Challenge Max. No. of Retries
//
#define WINSCNF_MIN_CHL_MAX_RETRIES 1
#define WINSCNF_DEF_CHL_MAX_RETRIES 3
//
// Also the min. tombstone timeout should be
// max(RefreshInterval, RPL_MULTIPLIER_FOR_TOMBTMOUT * MaxRplInterval)
//
// With Refresh Interval being 4 days, this will be atleast 4 days.
//
#define RPL_MULTIPLIER_FOR_TOMBTMOUT 4
//
// The verify interval should be a multiple of the tombstone time
// interval by at least the following amount. Keep the total time high
//
// With with the min. tombstone interval being at least 8 days, it will be at
// least (3 * 8 = 24 days)
//
#define TOMB_MULTIPLIER_FOR_VERIFY 3
//
// Tombstone interval - time period after which the state of a released
// entry is changed to NMSDB_E_TOMBSTONE if it has not
// been refreshed
//
#define WINSCNF_MIN_TOMBSTONE_INTERVAL (WINSCNF_MIN_REFRESH_INTERVAL * REF_MULTIPLIER_FOR_TOMB)
//
// Time period after which the tombstone should be deleted. The min. value
// is 1 days. This is to cut down on the possibility of a
// tombstone getting deleted prior to it getting replicated to another WINS.
//
#define WINSCNF_MIN_TOMBSTONE_TIMEOUT max(WINSCNF_MIN_REFRESH_INTERVAL, ONEDAY)
//
// Minimum time period for doing verifications of the replicas in the db
//
// Should be atleast 24 days.
//
#define WINSCNF_MIN_VERIFY_INTERVAL max(TWENTY_FOUR_DAYS, (WINSCNF_MIN_TOMBSTONE_INTERVAL * TOMB_MULTIPLIER_FOR_VERIFY))
#define WINSCNF_CC_INTVL_NM TEXT("TimeInterval")
#define WINSCNF_CC_MAX_RECS_AAT_NM TEXT("MaxRecsAtATime")
#define WINSCNF_CC_USE_RPL_PNRS_NM TEXT("UseRplPnrs")
#define WINSCNF_CC_DEF_INTERVAL ONEDAY
#define WINSCNF_CC_MIN_INTERVAL (ONEDAY/4)
#define WINSCNF_DEF_CC_SP_HR 2 //02 hrs - 2am
#define WINSCNF_CC_MIN_RECS_AAT 1000
#define WINSCNF_CC_DEF_RECS_AAT 30000
#define WINSCNF_CC_DEF_USE_RPL_PNRS 0
#if 0
//
// Make the refresh interval equal to twice the max. replication time interval
// if that is greater than the refresh interval.
//
#define WINSCNF_MAKE_REF_INTVL_M(RefreshInterval, MaxRplIntvl) max(REF_MULTIPLIER_FOR_ACTIVE * (MaxRplIntvl), RefreshInterval)
#endif
//
// The Tombstone interval should never be allowed to go over 4 days. We
// don't want a record to remain released for longer than that. It should
// turn into a tombstone so that it gets replicated.
//
// The reason we change the state of a record to released is to avoid
// replication if the reason for the release is a temporary shutdown of
// the pc. We have to consider a long weekend (3 days). We however
// also need to consider the fact that if the refresh interval is 40 mts or
// some such low value, then we should not keep the record in the released
// state for more than a day at the most. Consider a situation where
// a node registers with the backup because the primary is down and then
// goes back to the primary when it comes up. The primary does not
// increment the version number because the record is stil active. The
// record gets released at the backup and stays that way until it becomes
// a tombstone which results in replication and the backup again getting
// the active record from the primary. For the above situaion, we should
// make sure of two things: first - the record does not have an overly large
// tombstone interval; second - the replication time interval is small. We
// don't want to change the replication time interval set by the admin. but
// we can do something about the former.
//
// As long as the user sticks with the default refresh interval, the tombstone
// interval will be the same as that.
//
// For the case where the user specifies a different refresh interval, we use
// a max. of the refresh interval and a multiple of the max. rpl. interval.
//
//
#define WINSCNF_MAKE_TOMB_INTVL_M(RefreshInterval, MaxRplIntvl) min(max(REF_MULTIPLIER_FOR_TOMB * (MaxRplIntvl), RefreshInterval), FOUR_DAYS)
#define WINSCNF_MAKE_TOMB_INTVL_0_M(RefreshInterval) min(RefreshInterval, FOUR_DAYS)
//
// macro to get the minimum tombstone timeout based on the maximum replication
// time interval.
//
#define WINSCNF_MAKE_TOMBTMOUT_INTVL_M(MaxRplIntvl) max(WINSCNF_MIN_TOMBSTONE_TIMEOUT,(RPL_MULTIPLIER_FOR_TOMBTMOUT * (MaxRplIntvl)))
//
// Macro to get the minimum verify interval based on tombstone interval
//
// Should be atleast 8 days.
//
#define WINSCNF_MAKE_VERIFY_INTVL_M(TombstoneInterval) max(TWENTY_FOUR_DAYS, (TOMB_MULTIPLIER_FOR_VERIFY * (TombstoneInterval)))
//
// Min. Mcast TTL
//
#define WINSCNF_MIN_MCAST_TTL TTL_SUBNET_ONLY
#define WINSCNF_DEF_MCAST_TTL TTL_REASONABLE_REACH
#define WINSCNF_MAX_MCAST_TTL 32
#define WINSCNF_MIN_MCAST_INTVL FORTY_MTS
#define WINSCNF_DEF_MCAST_INTVL FORTY_MTS
#define WINS_QUEUE_HWM 500
#define WINS_QUEUE_HWM_MAX 5000
#define WINS_QUEUE_HWM_MIN 50
#endif _WINSCNST_H_