You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
152 lines
7.9 KiB
152 lines
7.9 KiB
EXTEND
|
|
0002 ; file not found
|
|
0004 ; too many open files
|
|
0005 ; access denied
|
|
0008 ; insufficient memory
|
|
0015 ; invalid drive was specified
|
|
0026 ; unknown media type
|
|
UTIL FORMAT
|
|
0001 COMMON 001 ; incorrect DOS version
|
|
0002 CR,"%1 percent completed. ",CR ; Padded with spaces to max of 0004, 0002 and 0055 (%1 in 0002 takes 3 chars, 13 in 0055)
|
|
0003 COMMON 003 ; "%ld bytes available on disk"
|
|
0004 CR,"Format complete. ",CR,LF ; Padded with spaces to max of 0004, 0002 and 0055 (%1 in 0002 takes 3 chars, 13 in 0055)
|
|
0005 COMMON 005 ; "%ld bytes in bad sectors"
|
|
0006 COMMON 006 ; "%ld bytes total disk space"
|
|
0007 "Insert new diskette for drive %1:",CR,LF
|
|
0008 COMMON 008 ; "%ld bytes used by system"
|
|
0009 "Reinsert diskette for drive %1:",CR,LF
|
|
0010 COMMON 035 ; volume label (11 chars, ENTER for none)?
|
|
0011 CR,"Format not supported on drive %1:", CR,LF
|
|
0012 CR,"Invalid device parameters from device driver.",CR,LF
|
|
0013 CR,"Error in IOCTL call. ",CR,LF
|
|
0014 CR,"Not a block device. ",CR,LF
|
|
0015 CR,"Error writing FAT. ",CR,LF
|
|
0016 CR,"Error writing directory.",CR,LF
|
|
0017 CR,"Cannot format an ASSIGNed or SUBSTed drive. ",CR,LF
|
|
0018 CR,"Cannot find System Files.",CR,LF
|
|
0019 CR,"Cannot format a network drive.",CR,LF
|
|
0020 COMMON 021 ; invalid chars in volume label
|
|
0021 CR,"Parameters not supported.",CR,LF
|
|
0022 CR,"Format terminated. ",CR,LF
|
|
0023 CR,"Disk unsuitable for system disk.",CR,LF
|
|
0024 CR,"Invalid media or Track 0 bad - disk unusable.",CR,LF
|
|
0025 CR,"Unable to write BOOT. ",CR,LF
|
|
0026 CR,"Error reading directory.",CR,LF
|
|
0027 COMMON 027 ; No target drive specified
|
|
0028 CR,"and press ENTER when ready..."
|
|
0029 CR,"Invalid Volume ID. ",CR,LF
|
|
0030 COMMON 030 ; system transferred
|
|
0031 CR,"Enter current volume label for drive %1: "
|
|
0032 CR,"Parameters not compatible",CR,LF,"with fixed disk.",CR,LF
|
|
0035 CR,"Error reading partition table.",CR,LF
|
|
0036 COMMON 036 ; volume serial number
|
|
0037 CR,"Format broken.",CR,LF
|
|
0038 CR,"Format not available on drive %1:",CR,LF
|
|
0039 CR,"Non-System disk or disk error.",CR,LF
|
|
0040 CR,"Bad Partition Table. ",CR,LF
|
|
0041 CR,"Parameters not supported by drive.",CR,LF
|
|
0042 CR,LF
|
|
0043 CR,LF,LF
|
|
0044 CR,"Insert DOS disk in drive %1:",CR,LF
|
|
0045 CR,LF,"WARNING, ALL DATA ON NON-REMOVABLE DISK",CR,LF
|
|
"DRIVE %1: WILL BE LOST!",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0046 CR,"Format another (Y/N)?"
|
|
0047 CR,"Error reading partition table.",CR,LF
|
|
0048 CR,"Error writing partition table.",CR,LF
|
|
0049 CR,"Parameters not compatible.", CR,LF
|
|
0050 "%1 allocation units available on disk.",CR,LF
|
|
0051 "%1 bytes in each allocation unit.",CR,LF
|
|
0052 CR, "Error writing partition table.",CR,LF
|
|
0053 CR,"Same parameter entered twice.",CR,LF
|
|
0054 CR,"Must enter both /T and /N parameters.",CR,LF
|
|
0055 CR,"Trying to recover allocation unit %1 ",CR ; Padded with spaces to max of 0004, 0002 and 0055 (%1 in 0002 takes 3 chars, 13 in 0055)
|
|
0056 CR,"There is not enough room to create a restore file.",CR,LF
|
|
"You will not be able to use the UNFORMAT utility.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0057 CR,"There is not enough disk space for system files. ",CR,LF
|
|
0058 CR,"Disk was formatted under a different version of DOS.",CR,LF
|
|
"This disk cannot be unformatted.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0059 CR,"There was an error creating the format recovery file.",CR,LF
|
|
"This disk cannot be unformatted.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0060 CR,"Volume label is not supported with /8 parameter.",CR,LF
|
|
0061 CR,LF,"WARNING, ALL DATA ON DISK",CR,LF
|
|
"DRIVE %1: WILL BE LOST!",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0062 CR,"Cannot use the /Z switch on a removable drive.",CR,LF
|
|
0063 CR,"Cannot use the /Z switch on this CMCDD drive.",CR,LF
|
|
0064 CR,"The sectors per cluster value given on /Z is too small. It would",CR,LF
|
|
"switch the drive type to FAT32. You must specify a larger value.",CR,LF
|
|
0065 CR,"The sectors per cluster value given on /Z is too large. It would",CR,LF
|
|
"switch the drive type to FAT16. You must specify a smaller value.",CR,LF
|
|
0066 CR,"You have specified a cluster size that results in a huge FAT. If you",CR,LF
|
|
"use this size, disk utility perfomance may be impacted.",CR,LF
|
|
"Are you sure you want to proceed with Format (Y/N)?"
|
|
0067 CR,"Cannot use both the /Z and /Q switches.",CR,LF
|
|
0068 CR,"You have specified a cluster size that is too small for this drive.",CR,LF
|
|
"Use a larger cluster size and try again.",CR,LF
|
|
0070 CR,"Insufficient memory to load system files.",CR,LF
|
|
0071 CR,"Insufficient memory.",CR,LF
|
|
0075 CR,"QuickFormat another (Y/N)?"
|
|
0076 CR,"Existing format differs from that specified.",CR,LF
|
|
"This disk cannot be unformatted.",CR,LF
|
|
"Proceed with Format (Y/N)?"
|
|
0077 CR,"Invalid existing format.",CR,LF
|
|
"This disk cannot be QuickFormatted.",CR,LF
|
|
"Proceed with Unconditional Format (Y/N)?"
|
|
0078 CR,"Formatting %1K",CR,LF
|
|
0079 CR,"Formatting %1M",CR,LF
|
|
0080 CR,"Formatting %1.%2M",CR,LF
|
|
0081 CR,"WARNING: This disk cannot be unformatted if system files are transferred.",CR,LF
|
|
"Proceed with system transfer anyway (Y/N)?"
|
|
0082 CR,"Verifying %1K",CR,LF
|
|
0083 CR,"Verifying %1M",CR,LF
|
|
0084 CR,"Verifying %1.%2M",CR,LF
|
|
0085 CR,"Saving UNFORMAT information.",CR,LF
|
|
0086 CR,"Checking existing disk format.",CR,LF
|
|
0087 CR,"QuickFormatting %1K",CR,LF
|
|
0088 CR,"QuickFormatting %1M",CR,LF
|
|
0089 CR,"QuickFormatting %1.%2M",CR,LF
|
|
0090 CR,"Drive %1 is a compressed drive.",CR,LF
|
|
"Use the DRVSPACE tool to format this drive.",CR,LF
|
|
0091 CR,LF,"Drive %1 contains one or more compressed drives.",CR,LF
|
|
"Unmount all the compressed drives on this drive before formatting.",CR,LF
|
|
0092 CR,"Drive %1: is currently in use by another process.",CR,LF
|
|
"Aborting Format.",CR,LF
|
|
0093 CR,"Recording current bad clusters",CR,LF
|
|
0094 CR,"Complete. ",CR,LF ; padded with blanks to erase 0002
|
|
0095 CR,"Writing out file allocation table",CR,LF
|
|
0096 "%1.%2 MB total disk space",CR,LF
|
|
0097 "%1.%2 MB in bad sectors",CR,LF
|
|
0098 "%1.%2 MB available on disk",CR,LF
|
|
0099 "Calculating free space (this may take several minutes)...",CR,LF
|
|
0100 CR,LF,"Microsoft Windows no longer supports the format /s command.",CR,LF
|
|
"To create a Startup Disk, click the Add/Remove Programs",CR,LF
|
|
"icon in Control Panel.",CR,LF
|
|
|
|
0300 "Formats a disk for use with MS-DOS.",CR,LF,CR,LF
|
|
0301 "FORMAT drive: [/V[:label]] [/Q] [/F:size] [/C]",CR,LF
|
|
0302 "FORMAT drive: [/V[:label]] [/Q] [/T:tracks /N:sectors] [/C]",CR,LF
|
|
0303 "FORMAT drive: [/V[:label]] [/Q] [/1] [/4] [/C]",CR,LF
|
|
0304 "FORMAT drive: [/Q] [/1] [/4] [/8] [/C]",CR,LF,CR,LF
|
|
0305 " /V[:label] Specifies the volume label.",CR,LF
|
|
0306 " /Q Performs a quick format.",CR,LF
|
|
;0307 " /U Performs an unconditional format.",CR,LF
|
|
307 ""
|
|
0308 " /F:size Specifies the size of the floppy disk to format (such ",CR,LF
|
|
0309 " as 160, 180, 320, 360, 720, 1.2, 1.44, 2.88).",CR,LF
|
|
0310 " /B Allocates space on the formatted disk for system files.",CR,LF
|
|
0311 " /S Copies system files to the formatted disk.",CR,LF
|
|
0312 " /T:tracks Specifies the number of tracks per disk side.",CR,LF
|
|
0313 " /N:sectors Specifies the number of sectors per track.",CR,LF
|
|
0314 " /1 Formats a single side of a floppy disk.",CR,LF
|
|
0315 " /4 Formats a 5.25-inch 360K floppy disk in a high-density drive.",CR,LF
|
|
0316 " /8 Formats eight sectors per track.",CR,LF
|
|
0317 " /C Tests clusters that are currently marked ""bad.""",CR,LF
|
|
0318 " /A:size Align system sectors for NTFS friendly FAT (valid values are", CR,LF
|
|
0319 " 2, 4, 8, 16, 32, 64, 128).", CR,LF
|
|
;
|
|
; Message in boot sector.
|
|
0330 COMMON 040
|