You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2680 lines
105 KiB
2680 lines
105 KiB
RFC1213-MIB DEFINITIONS ::= BEGIN
|
|
|
|
--
|
|
-- Microsoft extracted from RFC1213 and made no changes.
|
|
--
|
|
|
|
IMPORTS
|
|
mgmt, NetworkAddress, IpAddress, Counter, Gauge,
|
|
TimeTicks
|
|
FROM RFC1155-SMI
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- This MIB module uses the extended OBJECT-TYPE macro as
|
|
-- defined in [14];
|
|
|
|
|
|
-- MIB-II (same prefix as MIB-I)
|
|
|
|
mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
|
|
|
|
-- textual conventions
|
|
|
|
DisplayString ::=
|
|
OCTET STRING
|
|
-- This data type is used to model textual information taken
|
|
-- from the NVT ASCII character set. By convention, objects
|
|
-- with this syntax are declared as having
|
|
--
|
|
-- SIZE (0..255)
|
|
|
|
PhysAddress ::=
|
|
OCTET STRING
|
|
-- This data type is used to model media addresses. For many
|
|
-- types of media, this will be in a binary representation.
|
|
-- For example, an ethernet address would be represented as
|
|
-- a string of 6 octets.
|
|
|
|
|
|
-- groups in MIB-II
|
|
|
|
system OBJECT IDENTIFIER ::= { mib-2 1 }
|
|
|
|
interfaces OBJECT IDENTIFIER ::= { mib-2 2 }
|
|
|
|
at OBJECT IDENTIFIER ::= { mib-2 3 }
|
|
|
|
ip OBJECT IDENTIFIER ::= { mib-2 4 }
|
|
|
|
icmp OBJECT IDENTIFIER ::= { mib-2 5 }
|
|
|
|
tcp OBJECT IDENTIFIER ::= { mib-2 6 }
|
|
|
|
udp OBJECT IDENTIFIER ::= { mib-2 7 }
|
|
|
|
egp OBJECT IDENTIFIER ::= { mib-2 8 }
|
|
|
|
-- historical (some say hysterical)
|
|
-- cmot OBJECT IDENTIFIER ::= { mib-2 9 }
|
|
|
|
transmission OBJECT IDENTIFIER ::= { mib-2 10 }
|
|
|
|
snmp OBJECT IDENTIFIER ::= { mib-2 11 }
|
|
|
|
|
|
-- the System group
|
|
|
|
-- Implementation of the System group is mandatory for all
|
|
-- systems. If an agent is not configured to have a value
|
|
-- for any of these variables, a string of length 0 is
|
|
-- returned.
|
|
|
|
sysDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual description of the entity. This value
|
|
should include the full name and version
|
|
identification of the system's hardware type,
|
|
software operating-system, and networking
|
|
software. It is mandatory that this only contain
|
|
printable ASCII characters."
|
|
::= { system 1 }
|
|
|
|
sysObjectID OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The vendor's authoritative identification of the
|
|
network management subsystem contained in the
|
|
entity. This value is allocated within the SMI
|
|
enterprises subtree (1.3.6.1.4.1) and provides an
|
|
easy and unambiguous means for determining `what
|
|
kind of box' is being managed. For example, if
|
|
vendor `Flintstones, Inc.' was assigned the
|
|
subtree 1.3.6.1.4.1.4242, it could assign the
|
|
identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
|
|
Router'."
|
|
::= { system 2 }
|
|
|
|
sysUpTime OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time (in hundredths of a second) since the
|
|
network management portion of the system was last
|
|
re-initialized."
|
|
::= { system 3 }
|
|
|
|
sysContact OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The textual identification of the contact person
|
|
for this managed node, together with information
|
|
on how to contact this person."
|
|
::= { system 4 }
|
|
|
|
sysName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An administratively-assigned name for this
|
|
managed node. By convention, this is the node's
|
|
fully-qualified domain name."
|
|
::= { system 5 }
|
|
|
|
sysLocation OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The physical location of this node (e.g.,
|
|
`telephone closet, 3rd floor')."
|
|
::= { system 6 }
|
|
|
|
sysServices OBJECT-TYPE
|
|
SYNTAX INTEGER (0..127)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A value which indicates the set of services that
|
|
this entity primarily offers.
|
|
|
|
The value is a sum. This sum initially takes the
|
|
value zero, Then, for each layer, L, in the range
|
|
1 through 7, that this node performs transactions
|
|
for, 2 raised to (L - 1) is added to the sum. For
|
|
example, a node which performs primarily routing
|
|
functions would have a value of 4 (2^(3-1)). In
|
|
contrast, a node which is a host offering
|
|
application services would have a value of 72
|
|
(2^(4-1) + 2^(7-1)). Note that in the context of
|
|
the Internet suite of protocols, values should be
|
|
calculated accordingly:
|
|
|
|
layer functionality
|
|
1 physical (e.g., repeaters)
|
|
2 datalink/subnetwork (e.g., bridges)
|
|
3 internet (e.g., IP gateways)
|
|
4 end-to-end (e.g., IP hosts)
|
|
7 applications (e.g., mail relays)
|
|
|
|
For systems including OSI protocols, layers 5 and
|
|
6 may also be counted."
|
|
::= { system 7 }
|
|
|
|
|
|
-- the Interfaces group
|
|
|
|
-- Implementation of the Interfaces group is mandatory for
|
|
-- all systems.
|
|
|
|
ifNumber OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of network interfaces (regardless of
|
|
their current state) present on this system."
|
|
::= { interfaces 1 }
|
|
|
|
|
|
-- the Interfaces table
|
|
|
|
-- The Interfaces table contains information on the entity's
|
|
-- interfaces. Each interface is thought of as being
|
|
-- attached to a `subnetwork'. Note that this term should
|
|
-- not be confused with `subnet' which refers to an
|
|
-- addressing partitioning scheme used in the Internet suite
|
|
-- of protocols.
|
|
|
|
ifTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of interface entries. The number of
|
|
entries is given by the value of ifNumber."
|
|
::= { interfaces 2 }
|
|
|
|
ifEntry OBJECT-TYPE
|
|
SYNTAX IfEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An interface entry containing objects at the
|
|
subnetwork layer and below for a particular
|
|
interface."
|
|
INDEX { ifIndex }
|
|
::= { ifTable 1 }
|
|
|
|
IfEntry ::=
|
|
SEQUENCE {
|
|
ifIndex
|
|
INTEGER,
|
|
ifDescr
|
|
DisplayString,
|
|
ifType
|
|
INTEGER,
|
|
ifMtu
|
|
INTEGER,
|
|
ifSpeed
|
|
Gauge,
|
|
ifPhysAddress
|
|
PhysAddress,
|
|
ifAdminStatus
|
|
INTEGER,
|
|
ifOperStatus
|
|
INTEGER,
|
|
ifLastChange
|
|
TimeTicks,
|
|
ifInOctets
|
|
Counter,
|
|
ifInUcastPkts
|
|
Counter,
|
|
ifInNUcastPkts
|
|
Counter,
|
|
ifInDiscards
|
|
Counter,
|
|
ifInErrors
|
|
Counter,
|
|
ifInUnknownProtos
|
|
Counter,
|
|
ifOutOctets
|
|
Counter,
|
|
ifOutUcastPkts
|
|
Counter,
|
|
ifOutNUcastPkts
|
|
Counter,
|
|
ifOutDiscards
|
|
Counter,
|
|
ifOutErrors
|
|
Counter,
|
|
ifOutQLen
|
|
Gauge,
|
|
ifSpecific
|
|
OBJECT IDENTIFIER
|
|
}
|
|
|
|
ifIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value for each interface. Its value
|
|
ranges between 1 and the value of ifNumber. The
|
|
value for each interface must remain constant at
|
|
least from one re-initialization of the entity's
|
|
network management system to the next re-
|
|
initialization."
|
|
::= { ifEntry 1 }
|
|
|
|
ifDescr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual string containing information about the
|
|
interface. This string should include the name of
|
|
the manufacturer, the product name and the version
|
|
of the hardware interface."
|
|
::= { ifEntry 2 }
|
|
|
|
ifType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
regular1822(2),
|
|
hdh1822(3),
|
|
ddn-x25(4),
|
|
rfc877-x25(5),
|
|
ethernet-csmacd(6),
|
|
iso88023-csmacd(7),
|
|
iso88024-tokenBus(8),
|
|
iso88025-tokenRing(9),
|
|
iso88026-man(10),
|
|
starLan(11),
|
|
proteon-10Mbit(12),
|
|
proteon-80Mbit(13),
|
|
hyperchannel(14),
|
|
fddi(15),
|
|
lapb(16),
|
|
sdlc(17),
|
|
ds1(18), -- T-1
|
|
e1(19), -- european equiv. of T-1
|
|
basicISDN(20),
|
|
primaryISDN(21), -- proprietary serial
|
|
propPointToPointSerial(22),
|
|
ppp(23),
|
|
softwareLoopback(24),
|
|
eon(25), -- CLNP over IP [11]
|
|
ethernet-3Mbit(26),
|
|
nsip(27), -- XNS over IP
|
|
slip(28), -- generic SLIP
|
|
ultra(29), -- ULTRA technologies
|
|
ds3(30), -- T-3
|
|
sip(31), -- SMDS
|
|
frame-relay(32)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of interface, distinguished according to
|
|
the physical/link protocol(s) immediately `below'
|
|
the network layer in the protocol stack."
|
|
::= { ifEntry 3 }
|
|
|
|
ifMtu OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The size of the largest datagram which can be
|
|
sent/received on the interface, specified in
|
|
octets. For interfaces that are used for
|
|
transmitting network datagrams, this is the size
|
|
of the largest network datagram that can be sent
|
|
on the interface."
|
|
::= { ifEntry 4 }
|
|
|
|
ifSpeed OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An estimate of the interface's current bandwidth
|
|
in bits per second. For interfaces which do not
|
|
vary in bandwidth or for those where no accurate
|
|
estimation can be made, this object should contain
|
|
the nominal bandwidth."
|
|
::= { ifEntry 5 }
|
|
|
|
ifPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface's address at the protocol layer
|
|
immediately `below' the network layer in the
|
|
protocol stack. For interfaces which do not have
|
|
such an address (e.g., a serial line), this object
|
|
should contain an octet string of zero length."
|
|
::= { ifEntry 6 }
|
|
|
|
ifAdminStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The desired state of the interface. The
|
|
testing(3) state indicates that no operational
|
|
packets can be passed."
|
|
::= { ifEntry 7 }
|
|
|
|
ifOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1), -- ready to pass packets
|
|
down(2),
|
|
testing(3) -- in some test mode
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current operational state of the interface.
|
|
The testing(3) state indicates that no operational
|
|
packets can be passed."
|
|
::= { ifEntry 8 }
|
|
|
|
ifLastChange OBJECT-TYPE
|
|
SYNTAX TimeTicks
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the time the interface
|
|
entered its current operational state. If the
|
|
current state was entered prior to the last re-
|
|
initialization of the local network management
|
|
subsystem, then this object contains a zero
|
|
value."
|
|
::= { ifEntry 9 }
|
|
|
|
ifInOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of octets received on the
|
|
interface, including framing characters."
|
|
::= { ifEntry 10 }
|
|
|
|
ifInUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of subnetwork-unicast packets
|
|
delivered to a higher-layer protocol."
|
|
::= { ifEntry 11 }
|
|
|
|
ifInNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of non-unicast (i.e., subnetwork-
|
|
broadcast or subnetwork-multicast) packets
|
|
delivered to a higher-layer protocol."
|
|
::= { ifEntry 12 }
|
|
|
|
ifInDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of inbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being deliverable to a
|
|
higher-layer protocol. One possible reason for
|
|
discarding such a packet could be to free up
|
|
buffer space."
|
|
::= { ifEntry 13 }
|
|
|
|
ifInErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of inbound packets that contained
|
|
errors preventing them from being deliverable to a
|
|
higher-layer protocol."
|
|
::= { ifEntry 14 }
|
|
|
|
ifInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of packets received via the interface
|
|
which were discarded because of an unknown or
|
|
unsupported protocol."
|
|
::= { ifEntry 15 }
|
|
|
|
ifOutOctets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of octets transmitted out of the
|
|
interface, including framing characters."
|
|
::= { ifEntry 16 }
|
|
|
|
ifOutUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a
|
|
subnetwork-unicast address, including those that
|
|
were discarded or not sent."
|
|
::= { ifEntry 17 }
|
|
|
|
ifOutNUcastPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of packets that higher-level
|
|
protocols requested be transmitted to a non-
|
|
unicast (i.e., a subnetwork-broadcast or
|
|
subnetwork-multicast) address, including those
|
|
that were discarded or not sent."
|
|
::= { ifEntry 18 }
|
|
|
|
ifOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of outbound packets which were chosen
|
|
to be discarded even though no errors had been
|
|
detected to prevent their being transmitted. One
|
|
possible reason for discarding such a packet could
|
|
be to free up buffer space."
|
|
::= { ifEntry 19 }
|
|
|
|
ifOutErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of outbound packets that could not be
|
|
transmitted because of errors."
|
|
::= { ifEntry 20 }
|
|
|
|
ifOutQLen OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The length of the output packet queue (in
|
|
packets)."
|
|
::= { ifEntry 21 }
|
|
|
|
ifSpecific OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A reference to MIB definitions specific to the
|
|
particular media being used to realize the
|
|
interface. For example, if the interface is
|
|
realized by an ethernet, then the value of this
|
|
object refers to a document defining objects
|
|
specific to ethernet. If this information is not
|
|
present, its value should be set to the OBJECT
|
|
IDENTIFIER { 0 0 }, which is a syntatically valid
|
|
object identifier, and any conformant
|
|
implementation of ASN.1 and BER must be able to
|
|
generate and recognize this value."
|
|
::= { ifEntry 22 }
|
|
|
|
|
|
-- the Address Translation group
|
|
|
|
-- Implementation of the Address Translation group is
|
|
-- mandatory for all systems. Note however that this group
|
|
-- is deprecated by MIB-II. That is, it is being included
|
|
-- solely for compatibility with MIB-I nodes, and will most
|
|
-- likely be excluded from MIB-III nodes. From MIB-II and
|
|
-- onwards, each network protocol group contains its own
|
|
-- address translation tables.
|
|
|
|
-- The Address Translation group contains one table which is
|
|
-- the union across all interfaces of the translation tables
|
|
-- for converting a NetworkAddress (e.g., an IP address) into
|
|
-- a subnetwork-specific address. For lack of a better term,
|
|
-- this document refers to such a subnetwork-specific address
|
|
-- as a `physical' address.
|
|
|
|
-- Examples of such translation tables are: for broadcast
|
|
-- media where ARP is in use, the translation table is
|
|
-- equivalent to the ARP cache; or, on an X.25 network where
|
|
-- non-algorithmic translation to X.121 addresses is
|
|
-- required, the translation table contains the
|
|
-- NetworkAddress to X.121 address equivalences.
|
|
|
|
atTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The Address Translation tables contain the
|
|
NetworkAddress to `physical' address equivalences.
|
|
Some interfaces do not use translation tables for
|
|
determining address equivalences (e.g., DDN-X.25
|
|
has an algorithmic method); if all interfaces are
|
|
of this type, then the Address Translation table
|
|
is empty, i.e., has zero entries."
|
|
::= { at 1 }
|
|
|
|
atEntry OBJECT-TYPE
|
|
SYNTAX AtEntry
|
|
ACCESS not-accessible
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"Each entry contains one NetworkAddress to
|
|
`physical' address equivalence."
|
|
INDEX { atIfIndex,
|
|
atNetAddress }
|
|
::= { atTable 1 }
|
|
|
|
AtEntry ::=
|
|
SEQUENCE {
|
|
atIfIndex
|
|
INTEGER,
|
|
atPhysAddress
|
|
PhysAddress,
|
|
atNetAddress
|
|
NetworkAddress
|
|
}
|
|
|
|
atIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The interface on which this entry's equivalence
|
|
is effective. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { atEntry 1 }
|
|
|
|
atPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The media-dependent `physical' address.
|
|
|
|
Setting this object to a null string (one of zero
|
|
length) has the effect of invaliding the
|
|
corresponding entry in the atTable object. That
|
|
is, it effectively dissasociates the interface
|
|
identified with said entry from the mapping
|
|
identified with said entry. It is an
|
|
implementation-specific matter as to whether the
|
|
agent removes an invalidated entry from the table.
|
|
Accordingly, management stations must be prepared
|
|
to receive tabular information from agents that
|
|
corresponds to entries not currently in use.
|
|
Proper interpretation of such entries requires
|
|
examination of the relevant atPhysAddress object."
|
|
::= { atEntry 2 }
|
|
|
|
atNetAddress OBJECT-TYPE
|
|
SYNTAX NetworkAddress
|
|
ACCESS read-write
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The NetworkAddress (e.g., the IP address)
|
|
corresponding to the media-dependent `physical'
|
|
address."
|
|
::= { atEntry 3 }
|
|
|
|
|
|
-- the IP group
|
|
|
|
-- Implementation of the IP group is mandatory for all
|
|
-- systems.
|
|
|
|
ipForwarding OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forwarding(1), -- acting as a gateway
|
|
not-forwarding(2) -- NOT acting as a gateway
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The indication of whether this entity is acting
|
|
as an IP gateway in respect to the forwarding of
|
|
datagrams received by, but not addressed to, this
|
|
entity. IP gateways forward datagrams. IP hosts
|
|
do not (except those source-routed via the host).
|
|
|
|
Note that for some managed nodes, this object may
|
|
take on only a subset of the values possible.
|
|
Accordingly, it is appropriate for an agent to
|
|
return a `badValue' response if a management
|
|
station attempts to change this object to an
|
|
inappropriate value."
|
|
::= { ip 1 }
|
|
|
|
ipDefaultTTL OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The default value inserted into the Time-To-Live
|
|
field of the IP header of datagrams originated at
|
|
this entity, whenever a TTL value is not supplied
|
|
by the transport layer protocol."
|
|
::= { ip 2 }
|
|
|
|
ipInReceives OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of input datagrams received from
|
|
interfaces, including those received in error."
|
|
::= { ip 3 }
|
|
|
|
ipInHdrErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of input datagrams discarded due to
|
|
errors in their IP headers, including bad
|
|
checksums, version number mismatch, other format
|
|
errors, time-to-live exceeded, errors discovered
|
|
in processing their IP options, etc."
|
|
::= { ip 4 }
|
|
|
|
ipInAddrErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of input datagrams discarded because
|
|
the IP address in their IP header's destination
|
|
field was not a valid address to be received at
|
|
this entity. This count includes invalid
|
|
addresses (e.g., 0.0.0.0) and addresses of
|
|
unsupported Classes (e.g., Class E). For entities
|
|
which are not IP Gateways and therefore do not
|
|
forward datagrams, this counter includes datagrams
|
|
discarded because the destination address was not
|
|
a local address."
|
|
::= { ip 5 }
|
|
|
|
ipForwDatagrams OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of input datagrams for which this
|
|
entity was not their final IP destination, as a
|
|
result of which an attempt was made to find a
|
|
route to forward them to that final destination.
|
|
In entities which do not act as IP Gateways, this
|
|
counter will include only those packets which were
|
|
Source-Routed via this entity, and the Source-
|
|
Route option processing was successful."
|
|
::= { ip 6 }
|
|
|
|
ipInUnknownProtos OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of locally-addressed datagrams
|
|
received successfully but discarded because of an
|
|
unknown or unsupported protocol."
|
|
::= { ip 7 }
|
|
|
|
ipInDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of input IP datagrams for which no
|
|
problems were encountered to prevent their
|
|
continued processing, but which were discarded
|
|
(e.g., for lack of buffer space). Note that this
|
|
counter does not include any datagrams discarded
|
|
while awaiting re-assembly."
|
|
::= { ip 8 }
|
|
|
|
ipInDelivers OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of input datagrams successfully
|
|
delivered to IP user-protocols (including ICMP)."
|
|
::= { ip 9 }
|
|
|
|
ipOutRequests OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of IP datagrams which local IP
|
|
user-protocols (including ICMP) supplied to IP in
|
|
requests for transmission. Note that this counter
|
|
does not include any datagrams counted in
|
|
ipForwDatagrams."
|
|
::= { ip 10 }
|
|
|
|
ipOutDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of output IP datagrams for which no
|
|
problem was encountered to prevent their
|
|
transmission to their destination, but which were
|
|
discarded (e.g., for lack of buffer space). Note
|
|
that this counter would include datagrams counted
|
|
in ipForwDatagrams if any such packets met this
|
|
(discretionary) discard criterion."
|
|
::= { ip 11 }
|
|
|
|
ipOutNoRoutes OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP datagrams discarded because no
|
|
route could be found to transmit them to their
|
|
destination. Note that this counter includes any
|
|
packets counted in ipForwDatagrams which meet this
|
|
`no-route' criterion. Note that this includes any
|
|
datagarms which a host cannot route because all of
|
|
its default gateways are down."
|
|
::= { ip 12 }
|
|
|
|
ipReasmTimeout OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of seconds which received
|
|
fragments are held while they are awaiting
|
|
reassembly at this entity."
|
|
::= { ip 13 }
|
|
|
|
ipReasmReqds OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP fragments received which needed
|
|
to be reassembled at this entity."
|
|
::= { ip 14 }
|
|
|
|
ipReasmOKs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP datagrams successfully re-
|
|
assembled."
|
|
::= { ip 15 }
|
|
|
|
ipReasmFails OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of failures detected by the IP re-
|
|
assembly algorithm (for whatever reason: timed
|
|
out, errors, etc). Note that this is not
|
|
necessarily a count of discarded IP fragments
|
|
since some algorithms (notably the algorithm in
|
|
RFC 815) can lose track of the number of fragments
|
|
by combining them as they are received."
|
|
::= { ip 16 }
|
|
|
|
ipFragOKs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP datagrams that have been
|
|
successfully fragmented at this entity."
|
|
::= { ip 17 }
|
|
|
|
ipFragFails OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP datagrams that have been
|
|
discarded because they needed to be fragmented at
|
|
this entity but could not be, e.g., because their
|
|
Don't Fragment flag was set."
|
|
::= { ip 18 }
|
|
|
|
ipFragCreates OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of IP datagram fragments that have
|
|
been generated as a result of fragmentation at
|
|
this entity."
|
|
::= { ip 19 }
|
|
|
|
|
|
-- the IP address table
|
|
|
|
-- The IP address table contains this entity's IP addressing
|
|
-- information.
|
|
|
|
ipAddrTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The table of addressing information relevant to
|
|
this entity's IP addresses."
|
|
::= { ip 20 }
|
|
|
|
ipAddrEntry OBJECT-TYPE
|
|
SYNTAX IpAddrEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The addressing information for one of this
|
|
entity's IP addresses."
|
|
INDEX { ipAdEntAddr }
|
|
::= { ipAddrTable 1 }
|
|
|
|
IpAddrEntry ::=
|
|
SEQUENCE {
|
|
ipAdEntAddr
|
|
IpAddress,
|
|
ipAdEntIfIndex
|
|
INTEGER,
|
|
ipAdEntNetMask
|
|
IpAddress,
|
|
ipAdEntBcastAddr
|
|
INTEGER,
|
|
ipAdEntReasmMaxSize
|
|
INTEGER (0..65535)
|
|
}
|
|
|
|
ipAdEntAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address to which this entry's addressing
|
|
information pertains."
|
|
::= { ipAddrEntry 1 }
|
|
|
|
ipAdEntIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
interface to which this entry is applicable. The
|
|
interface identified by a particular value of this
|
|
index is the same interface as identified by the
|
|
same value of ifIndex."
|
|
::= { ipAddrEntry 2 }
|
|
|
|
ipAdEntNetMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The subnet mask associated with the IP address of
|
|
this entry. The value of the mask is an IP
|
|
address with all the network bits set to 1 and all
|
|
the hosts bits set to 0."
|
|
::= { ipAddrEntry 3 }
|
|
|
|
ipAdEntBcastAddr OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The value of the least-significant bit in the IP
|
|
broadcast address used for sending datagrams on
|
|
the (logical) interface associated with the IP
|
|
address of this entry. For example, when the
|
|
Internet standard all-ones broadcast address is
|
|
used, the value will be 1. This value applies to
|
|
both the subnet and network broadcasts addresses
|
|
used by the entity on this (logical) interface."
|
|
::= { ipAddrEntry 4 }
|
|
|
|
ipAdEntReasmMaxSize OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The size of the largest IP datagram which this
|
|
entity can re-assemble from incoming IP fragmented
|
|
datagrams received on this interface."
|
|
::= { ipAddrEntry 5 }
|
|
|
|
|
|
-- the IP routing table
|
|
|
|
-- The IP routing table contains an entry for each route
|
|
-- presently known to this entity.
|
|
|
|
ipRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This entity's IP Routing table."
|
|
::= { ip 21 }
|
|
|
|
ipRouteEntry OBJECT-TYPE
|
|
SYNTAX IpRouteEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A route to a particular destination."
|
|
INDEX { ipRouteDest }
|
|
::= { ipRouteTable 1 }
|
|
|
|
IpRouteEntry ::=
|
|
SEQUENCE {
|
|
ipRouteDest
|
|
IpAddress,
|
|
ipRouteIfIndex
|
|
INTEGER,
|
|
ipRouteMetric1
|
|
INTEGER,
|
|
ipRouteMetric2
|
|
INTEGER,
|
|
ipRouteMetric3
|
|
INTEGER,
|
|
ipRouteMetric4
|
|
INTEGER,
|
|
ipRouteNextHop
|
|
IpAddress,
|
|
ipRouteType
|
|
INTEGER,
|
|
ipRouteProto
|
|
INTEGER,
|
|
ipRouteAge
|
|
INTEGER,
|
|
ipRouteMask
|
|
IpAddress,
|
|
ipRouteMetric5
|
|
INTEGER,
|
|
ipRouteInfo
|
|
OBJECT IDENTIFIER
|
|
}
|
|
|
|
ipRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The destination IP address of this route. An
|
|
entry with a value of 0.0.0.0 is considered a
|
|
default route. Multiple routes to a single
|
|
destination can appear in the table, but access to
|
|
such multiple entries is dependent on the table-
|
|
access mechanisms defined by the network
|
|
management protocol in use."
|
|
::= { ipRouteEntry 1 }
|
|
|
|
ipRouteIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The index value which uniquely identifies the
|
|
local interface through which the next hop of this
|
|
route should be reached. The interface identified
|
|
by a particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { ipRouteEntry 2 }
|
|
|
|
ipRouteMetric1 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The primary routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
ipRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { ipRouteEntry 3 }
|
|
|
|
ipRouteMetric2 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
ipRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { ipRouteEntry 4 }
|
|
|
|
ipRouteMetric3 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
ipRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { ipRouteEntry 5 }
|
|
|
|
ipRouteMetric4 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
ipRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { ipRouteEntry 6 }
|
|
|
|
ipRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of the next hop of this route.
|
|
(In the case of a route bound to an interface
|
|
which is realized via a broadcast media, the value
|
|
of this field is the agent's IP address on that
|
|
interface.)"
|
|
::= { ipRouteEntry 7 }
|
|
|
|
ipRouteType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
invalid(2), -- an invalidated route
|
|
|
|
-- route to directly
|
|
direct(3), -- connected (sub-)network
|
|
|
|
-- route to a non-local
|
|
indirect(4) -- host/network/sub-network
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of route. Note that the values
|
|
direct(3) and indirect(4) refer to the notion of
|
|
direct and indirect routing in the IP
|
|
architecture.
|
|
|
|
Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry
|
|
in the ipRouteTable object. That is, it
|
|
effectively dissasociates the destination
|
|
identified with said entry from the route
|
|
identified with said entry. It is an
|
|
implementation-specific matter as to whether the
|
|
agent removes an invalidated entry from the table.
|
|
Accordingly, management stations must be prepared
|
|
to receive tabular information from agents that
|
|
corresponds to entries not currently in use.
|
|
Proper interpretation of such entries requires
|
|
examination of the relevant ipRouteType object."
|
|
::= { ipRouteEntry 8 }
|
|
|
|
ipRouteProto OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
-- non-protocol information,
|
|
-- e.g., manually configured
|
|
local(2), -- entries
|
|
|
|
-- set via a network
|
|
netmgmt(3), -- management protocol
|
|
|
|
-- obtained via ICMP,
|
|
icmp(4), -- e.g., Redirect
|
|
|
|
-- the remaining values are
|
|
-- all gateway routing
|
|
-- protocols
|
|
egp(5),
|
|
ggp(6),
|
|
hello(7),
|
|
rip(8),
|
|
is-is(9),
|
|
es-is(10),
|
|
ciscoIgrp(11),
|
|
bbnSpfIgp(12),
|
|
ospf(13),
|
|
bgp(14)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The routing mechanism via which this route was
|
|
learned. Inclusion of values for gateway routing
|
|
protocols is not intended to imply that hosts
|
|
should support those protocols."
|
|
::= { ipRouteEntry 9 }
|
|
|
|
ipRouteAge OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of seconds since this route was last
|
|
updated or otherwise determined to be correct.
|
|
Note that no semantics of `too old' can be implied
|
|
except through knowledge of the routing protocol
|
|
by which the route was learned."
|
|
::= { ipRouteEntry 10 }
|
|
|
|
ipRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicate the mask to be logical-ANDed with the
|
|
destination address before being compared to the
|
|
value in the ipRouteDest field. For those systems
|
|
that do not support arbitrary subnet masks, an
|
|
agent constructs the value of the ipRouteMask by
|
|
determining whether the value of the correspondent
|
|
ipRouteDest field belong to a class-A, B, or C
|
|
network, and then using one of:
|
|
|
|
mask network
|
|
255.0.0.0 class-A
|
|
255.255.0.0 class-B
|
|
255.255.255.0 class-C
|
|
|
|
If the value of the ipRouteDest is 0.0.0.0 (a
|
|
default route), then the mask value is also
|
|
0.0.0.0. It should be noted that all IP routing
|
|
subsystems implicitly use this mechanism."
|
|
::= { ipRouteEntry 11 }
|
|
|
|
ipRouteMetric5 OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An alternate routing metric for this route. The
|
|
semantics of this metric are determined by the
|
|
routing-protocol specified in the route's
|
|
ipRouteProto value. If this metric is not used,
|
|
its value should be set to -1."
|
|
::= { ipRouteEntry 12 }
|
|
|
|
ipRouteInfo OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A reference to MIB definitions specific to the
|
|
particular routing protocol which is responsible
|
|
for this route, as determined by the value
|
|
specified in the route's ipRouteProto value. If
|
|
this information is not present, its value should
|
|
be set to the OBJECT IDENTIFIER { 0 0 }, which is
|
|
a syntatically valid object identifier, and any
|
|
conformant implementation of ASN.1 and BER must be
|
|
able to generate and recognize this value."
|
|
::= { ipRouteEntry 13 }
|
|
|
|
|
|
-- the IP Address Translation table
|
|
|
|
-- The IP address translation table contain the IpAddress to
|
|
-- `physical' address equivalences. Some interfaces do not
|
|
-- use translation tables for determining address
|
|
-- equivalences (e.g., DDN-X.25 has an algorithmic method);
|
|
-- if all interfaces are of this type, then the Address
|
|
-- Translation table is empty, i.e., has zero entries.
|
|
|
|
ipNetToMediaTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IpNetToMediaEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address Translation table used for mapping
|
|
from IP addresses to physical addresses."
|
|
::= { ip 22 }
|
|
|
|
ipNetToMediaEntry OBJECT-TYPE
|
|
SYNTAX IpNetToMediaEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Each entry contains one IpAddress to `physical'
|
|
address equivalence."
|
|
INDEX { ipNetToMediaIfIndex,
|
|
ipNetToMediaNetAddress }
|
|
::= { ipNetToMediaTable 1 }
|
|
|
|
IpNetToMediaEntry ::=
|
|
SEQUENCE {
|
|
ipNetToMediaIfIndex
|
|
INTEGER,
|
|
ipNetToMediaPhysAddress
|
|
PhysAddress,
|
|
ipNetToMediaNetAddress
|
|
IpAddress,
|
|
ipNetToMediaType
|
|
INTEGER
|
|
}
|
|
|
|
ipNetToMediaIfIndex OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interface on which this entry's equivalence
|
|
is effective. The interface identified by a
|
|
particular value of this index is the same
|
|
interface as identified by the same value of
|
|
ifIndex."
|
|
::= { ipNetToMediaEntry 1 }
|
|
|
|
ipNetToMediaPhysAddress OBJECT-TYPE
|
|
SYNTAX PhysAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The media-dependent `physical' address."
|
|
::= { ipNetToMediaEntry 2 }
|
|
|
|
ipNetToMediaNetAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IpAddress corresponding to the media-
|
|
dependent `physical' address."
|
|
::= { ipNetToMediaEntry 3 }
|
|
|
|
ipNetToMediaType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
invalid(2), -- an invalidated mapping
|
|
dynamic(3),
|
|
static(4)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of mapping.
|
|
|
|
Setting this object to the value invalid(2) has
|
|
the effect of invalidating the corresponding entry
|
|
in the ipNetToMediaTable. That is, it effectively
|
|
dissasociates the interface identified with said
|
|
entry from the mapping identified with said entry.
|
|
It is an implementation-specific matter as to
|
|
whether the agent removes an invalidated entry
|
|
from the table. Accordingly, management stations
|
|
must be prepared to receive tabular information
|
|
from agents that corresponds to entries not
|
|
currently in use. Proper interpretation of such
|
|
entries requires examination of the relevant
|
|
ipNetToMediaType object."
|
|
::= { ipNetToMediaEntry 4 }
|
|
|
|
|
|
-- additional IP objects
|
|
|
|
ipRoutingDiscards OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of routing entries which were chosen
|
|
to be discarded even though they are valid. One
|
|
possible reason for discarding such an entry could
|
|
be to free-up buffer space for other routing
|
|
entries."
|
|
::= { ip 23 }
|
|
|
|
|
|
-- the ICMP group
|
|
|
|
-- Implementation of the ICMP group is mandatory for all
|
|
-- systems.
|
|
|
|
icmpInMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of ICMP messages which the
|
|
entity received. Note that this counter includes
|
|
all those counted by icmpInErrors."
|
|
::= { icmp 1 }
|
|
|
|
icmpInErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP messages which the entity
|
|
received but determined as having ICMP-specific
|
|
errors (bad ICMP checksums, bad length, etc.)."
|
|
::= { icmp 2 }
|
|
|
|
icmpInDestUnreachs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Destination Unreachable
|
|
messages received."
|
|
::= { icmp 3 }
|
|
|
|
icmpInTimeExcds OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Time Exceeded messages
|
|
received."
|
|
::= { icmp 4 }
|
|
|
|
icmpInParmProbs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Parameter Problem messages
|
|
received."
|
|
::= { icmp 5 }
|
|
|
|
icmpInSrcQuenchs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Source Quench messages
|
|
received."
|
|
::= { icmp 6 }
|
|
|
|
icmpInRedirects OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Redirect messages received."
|
|
::= { icmp 7 }
|
|
|
|
icmpInEchos OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Echo (request) messages
|
|
received."
|
|
::= { icmp 8 }
|
|
|
|
icmpInEchoReps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Echo Reply messages received."
|
|
::= { icmp 9 }
|
|
|
|
icmpInTimestamps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Timestamp (request) messages
|
|
received."
|
|
::= { icmp 10 }
|
|
|
|
icmpInTimestampReps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Timestamp Reply messages
|
|
received."
|
|
::= { icmp 11 }
|
|
|
|
icmpInAddrMasks OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Address Mask Request messages
|
|
received."
|
|
::= { icmp 12 }
|
|
|
|
icmpInAddrMaskReps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Address Mask Reply messages
|
|
received."
|
|
::= { icmp 13 }
|
|
|
|
icmpOutMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of ICMP messages which this
|
|
entity attempted to send. Note that this counter
|
|
includes all those counted by icmpOutErrors."
|
|
::= { icmp 14 }
|
|
|
|
icmpOutErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP messages which this entity did
|
|
not send due to problems discovered within ICMP
|
|
such as a lack of buffers. This value should not
|
|
include errors discovered outside the ICMP layer
|
|
such as the inability of IP to route the resultant
|
|
datagram. In some implementations there may be no
|
|
types of error which contribute to this counter's
|
|
value."
|
|
::= { icmp 15 }
|
|
|
|
icmpOutDestUnreachs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Destination Unreachable
|
|
messages sent."
|
|
::= { icmp 16 }
|
|
|
|
icmpOutTimeExcds OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Time Exceeded messages sent."
|
|
::= { icmp 17 }
|
|
|
|
icmpOutParmProbs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Parameter Problem messages
|
|
sent."
|
|
::= { icmp 18 }
|
|
|
|
icmpOutSrcQuenchs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Source Quench messages sent."
|
|
::= { icmp 19 }
|
|
|
|
icmpOutRedirects OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Redirect messages sent. For a
|
|
host, this object will always be zero, since hosts
|
|
do not send redirects."
|
|
::= { icmp 20 }
|
|
|
|
icmpOutEchos OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Echo (request) messages sent."
|
|
::= { icmp 21 }
|
|
|
|
icmpOutEchoReps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Echo Reply messages sent."
|
|
::= { icmp 22 }
|
|
|
|
icmpOutTimestamps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Timestamp (request) messages
|
|
sent."
|
|
::= { icmp 23 }
|
|
|
|
icmpOutTimestampReps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Timestamp Reply messages
|
|
sent."
|
|
::= { icmp 24 }
|
|
|
|
icmpOutAddrMasks OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Address Mask Request messages
|
|
sent."
|
|
::= { icmp 25 }
|
|
|
|
icmpOutAddrMaskReps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of ICMP Address Mask Reply messages
|
|
sent."
|
|
::= { icmp 26 }
|
|
|
|
|
|
-- the TCP group
|
|
|
|
-- Implementation of the TCP group is mandatory for all
|
|
-- systems that implement the TCP.
|
|
|
|
-- Note that instances of object types that represent
|
|
-- information about a particular TCP connection are
|
|
-- transient; they persist only as long as the connection
|
|
-- in question.
|
|
|
|
tcpRtoAlgorithm OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1), -- none of the following
|
|
|
|
constant(2), -- a constant rto
|
|
rsre(3), -- MIL-STD-1778, Appendix B
|
|
vanj(4) -- Van Jacobson's algorithm [10]
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The algorithm used to determine the timeout value
|
|
used for retransmitting unacknowledged octets."
|
|
::= { tcp 1 }
|
|
|
|
tcpRtoMin OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The minimum value permitted by a TCP
|
|
implementation for the retransmission timeout,
|
|
measured in milliseconds. More refined semantics
|
|
for objects of this type depend upon the algorithm
|
|
used to determine the retransmission timeout. In
|
|
particular, when the timeout algorithm is rsre(3),
|
|
an object of this type has the semantics of the
|
|
LBOUND quantity described in RFC 793."
|
|
::= { tcp 2 }
|
|
|
|
tcpRtoMax OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum value permitted by a TCP
|
|
implementation for the retransmission timeout,
|
|
measured in milliseconds. More refined semantics
|
|
for objects of this type depend upon the algorithm
|
|
used to determine the retransmission timeout. In
|
|
particular, when the timeout algorithm is rsre(3),
|
|
an object of this type has the semantics of the
|
|
UBOUND quantity described in RFC 793."
|
|
::= { tcp 3 }
|
|
|
|
tcpMaxConn OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The limit on the total number of TCP connections
|
|
the entity can support. In entities where the
|
|
maximum number of connections is dynamic, this
|
|
object should contain the value -1."
|
|
::= { tcp 4 }
|
|
|
|
tcpActiveOpens OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times TCP connections have made a
|
|
direct transition to the SYN-SENT state from the
|
|
CLOSED state."
|
|
::= { tcp 5 }
|
|
|
|
tcpPassiveOpens OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times TCP connections have made a
|
|
direct transition to the SYN-RCVD state from the
|
|
LISTEN state."
|
|
::= { tcp 6 }
|
|
|
|
tcpAttemptFails OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times TCP connections have made a
|
|
direct transition to the CLOSED state from either
|
|
the SYN-SENT state or the SYN-RCVD state, plus the
|
|
number of times TCP connections have made a direct
|
|
transition to the LISTEN state from the SYN-RCVD
|
|
state."
|
|
::= { tcp 7 }
|
|
|
|
tcpEstabResets OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of times TCP connections have made a
|
|
direct transition to the CLOSED state from either
|
|
the ESTABLISHED state or the CLOSE-WAIT state."
|
|
::= { tcp 8 }
|
|
|
|
tcpCurrEstab OBJECT-TYPE
|
|
SYNTAX Gauge
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of TCP connections for which the
|
|
current state is either ESTABLISHED or CLOSE-
|
|
WAIT."
|
|
::= { tcp 9 }
|
|
|
|
tcpInSegs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of segments received, including
|
|
those received in error. This count includes
|
|
segments received on currently established
|
|
connections."
|
|
::= { tcp 10 }
|
|
|
|
tcpOutSegs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of segments sent, including
|
|
those on current connections but excluding those
|
|
containing only retransmitted octets."
|
|
::= { tcp 11 }
|
|
|
|
tcpRetransSegs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of segments retransmitted - that
|
|
is, the number of TCP segments transmitted
|
|
containing one or more previously transmitted
|
|
octets."
|
|
::= { tcp 12 }
|
|
|
|
|
|
-- the TCP Connection table
|
|
|
|
-- The TCP connection table contains information about this
|
|
-- entity's existing TCP connections.
|
|
|
|
tcpConnTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF TcpConnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing TCP connection-specific
|
|
information."
|
|
::= { tcp 13 }
|
|
|
|
tcpConnEntry OBJECT-TYPE
|
|
SYNTAX TcpConnEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about a particular current TCP
|
|
connection. An object of this type is transient,
|
|
in that it ceases to exist when (or soon after)
|
|
the connection makes the transition to the CLOSED
|
|
state."
|
|
INDEX { tcpConnLocalAddress,
|
|
tcpConnLocalPort,
|
|
tcpConnRemAddress,
|
|
tcpConnRemPort }
|
|
::= { tcpConnTable 1 }
|
|
|
|
TcpConnEntry ::=
|
|
SEQUENCE {
|
|
tcpConnState
|
|
INTEGER,
|
|
tcpConnLocalAddress
|
|
IpAddress,
|
|
tcpConnLocalPort
|
|
INTEGER (0..65535),
|
|
tcpConnRemAddress
|
|
IpAddress,
|
|
tcpConnRemPort
|
|
INTEGER (0..65535)
|
|
}
|
|
|
|
tcpConnState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
closed(1),
|
|
listen(2),
|
|
synSent(3),
|
|
synReceived(4),
|
|
established(5),
|
|
finWait1(6),
|
|
finWait2(7),
|
|
closeWait(8),
|
|
lastAck(9),
|
|
closing(10),
|
|
timeWait(11),
|
|
deleteTCB(12)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The state of this TCP connection.
|
|
|
|
The only value which may be set by a management
|
|
station is deleteTCB(12). Accordingly, it is
|
|
appropriate for an agent to return a `badValue'
|
|
response if a management station attempts to set
|
|
this object to any other value.
|
|
|
|
If a management station sets this object to the
|
|
value deleteTCB(12), then this has the effect of
|
|
deleting the TCB (as defined in RFC 793) of the
|
|
corresponding connection on the managed node,
|
|
resulting in immediate termination of the
|
|
connection.
|
|
|
|
As an implementation-specific option, a RST
|
|
segment may be sent from the managed node to the
|
|
other TCP endpoint (note however that RST segments
|
|
are not sent reliably)."
|
|
::= { tcpConnEntry 1 }
|
|
|
|
tcpConnLocalAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local IP address for this TCP connection. In
|
|
the case of a connection in the listen state which
|
|
is willing to accept connections for any IP
|
|
interface associated with the node, the value
|
|
0.0.0.0 is used."
|
|
::= { tcpConnEntry 2 }
|
|
|
|
tcpConnLocalPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local port number for this TCP connection."
|
|
::= { tcpConnEntry 3 }
|
|
|
|
tcpConnRemAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The remote IP address for this TCP connection."
|
|
::= { tcpConnEntry 4 }
|
|
|
|
tcpConnRemPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The remote port number for this TCP connection."
|
|
::= { tcpConnEntry 5 }
|
|
|
|
|
|
-- additional TCP objects
|
|
|
|
tcpInErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of segments received in error
|
|
(e.g., bad TCP checksums)."
|
|
::= { tcp 14 }
|
|
|
|
tcpOutRsts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of TCP segments sent containing the
|
|
RST flag."
|
|
::= { tcp 15 }
|
|
|
|
|
|
-- the UDP group
|
|
|
|
-- Implementation of the UDP group is mandatory for all
|
|
-- systems which implement the UDP.
|
|
|
|
udpInDatagrams OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of UDP datagrams delivered to
|
|
UDP users."
|
|
::= { udp 1 }
|
|
|
|
udpNoPorts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of received UDP datagrams for
|
|
which there was no application at the destination
|
|
port."
|
|
::= { udp 2 }
|
|
|
|
udpInErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of received UDP datagrams that could
|
|
not be delivered for reasons other than the lack
|
|
of an application at the destination port."
|
|
::= { udp 3 }
|
|
|
|
udpOutDatagrams OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of UDP datagrams sent from this
|
|
entity."
|
|
::= { udp 4 }
|
|
|
|
|
|
-- the UDP Listener table
|
|
|
|
-- The UDP listener table contains information about this
|
|
-- entity's UDP end-points on which a local application is
|
|
-- currently accepting datagrams.
|
|
|
|
udpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UdpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table containing UDP listener information."
|
|
::= { udp 5 }
|
|
|
|
udpEntry OBJECT-TYPE
|
|
SYNTAX UdpEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about a particular current UDP
|
|
listener."
|
|
INDEX { udpLocalAddress, udpLocalPort }
|
|
::= { udpTable 1 }
|
|
|
|
UdpEntry ::=
|
|
SEQUENCE {
|
|
udpLocalAddress
|
|
IpAddress,
|
|
udpLocalPort
|
|
INTEGER (0..65535)
|
|
}
|
|
|
|
udpLocalAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local IP address for this UDP listener. In
|
|
the case of a UDP listener which is willing to
|
|
accept datagrams for any IP interface associated
|
|
with the node, the value 0.0.0.0 is used."
|
|
::= { udpEntry 1 }
|
|
|
|
udpLocalPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The local port number for this UDP listener."
|
|
::= { udpEntry 2 }
|
|
|
|
|
|
-- the EGP group
|
|
|
|
-- Implementation of the EGP group is mandatory for all
|
|
-- systems which implement the EGP.
|
|
|
|
egpInMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP messages received without
|
|
error."
|
|
::= { egp 1 }
|
|
|
|
egpInErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP messages received that proved
|
|
to be in error."
|
|
::= { egp 2 }
|
|
|
|
egpOutMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of locally generated EGP
|
|
messages."
|
|
::= { egp 3 }
|
|
|
|
egpOutErrors OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of locally generated EGP messages not
|
|
sent due to resource limitations within an EGP
|
|
entity."
|
|
::= { egp 4 }
|
|
|
|
|
|
-- the EGP Neighbor table
|
|
|
|
-- The EGP neighbor table contains information about this
|
|
-- entity's EGP neighbors.
|
|
|
|
egpNeighTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF EgpNeighEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The EGP neighbor table."
|
|
::= { egp 5 }
|
|
|
|
egpNeighEntry OBJECT-TYPE
|
|
SYNTAX EgpNeighEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about this entity's relationship with
|
|
a particular EGP neighbor."
|
|
INDEX { egpNeighAddr }
|
|
::= { egpNeighTable 1 }
|
|
|
|
EgpNeighEntry ::=
|
|
SEQUENCE {
|
|
egpNeighState
|
|
INTEGER,
|
|
egpNeighAddr
|
|
IpAddress,
|
|
egpNeighAs
|
|
INTEGER,
|
|
egpNeighInMsgs
|
|
Counter,
|
|
egpNeighInErrs
|
|
Counter,
|
|
egpNeighOutMsgs
|
|
Counter,
|
|
egpNeighOutErrs
|
|
Counter,
|
|
egpNeighInErrMsgs
|
|
Counter,
|
|
egpNeighOutErrMsgs
|
|
Counter,
|
|
egpNeighStateUps
|
|
Counter,
|
|
egpNeighStateDowns
|
|
Counter,
|
|
egpNeighIntervalHello
|
|
INTEGER,
|
|
egpNeighIntervalPoll
|
|
INTEGER,
|
|
egpNeighMode
|
|
INTEGER,
|
|
egpNeighEventTrigger
|
|
INTEGER
|
|
}
|
|
|
|
egpNeighState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(1),
|
|
acquisition(2),
|
|
down(3),
|
|
up(4),
|
|
cease(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The EGP state of the local system with respect to
|
|
this entry's EGP neighbor. Each EGP state is
|
|
represented by a value that is one greater than
|
|
the numerical value associated with said state in
|
|
RFC 904."
|
|
::= { egpNeighEntry 1 }
|
|
|
|
egpNeighAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP address of this entry's EGP neighbor."
|
|
::= { egpNeighEntry 2 }
|
|
|
|
egpNeighAs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The autonomous system of this EGP peer. Zero
|
|
should be specified if the autonomous system
|
|
number of the neighbor is not yet known."
|
|
::= { egpNeighEntry 3 }
|
|
|
|
egpNeighInMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP messages received without error
|
|
from this EGP peer."
|
|
::= { egpNeighEntry 4 }
|
|
|
|
egpNeighInErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP messages received from this EGP
|
|
peer that proved to be in error (e.g., bad EGP
|
|
checksum)."
|
|
::= { egpNeighEntry 5 }
|
|
|
|
egpNeighOutMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of locally generated EGP messages to
|
|
this EGP peer."
|
|
::= { egpNeighEntry 6 }
|
|
|
|
egpNeighOutErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of locally generated EGP messages not
|
|
sent to this EGP peer due to resource limitations
|
|
within an EGP entity."
|
|
::= { egpNeighEntry 7 }
|
|
|
|
egpNeighInErrMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP-defined error messages received
|
|
from this EGP peer."
|
|
::= { egpNeighEntry 8 }
|
|
|
|
egpNeighOutErrMsgs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP-defined error messages sent to
|
|
this EGP peer."
|
|
::= { egpNeighEntry 9 }
|
|
|
|
egpNeighStateUps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP state transitions to the UP
|
|
state with this EGP peer."
|
|
::= { egpNeighEntry 10 }
|
|
|
|
egpNeighStateDowns OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of EGP state transitions from the UP
|
|
state to any other state with this EGP peer."
|
|
::= { egpNeighEntry 11 }
|
|
|
|
egpNeighIntervalHello OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interval between EGP Hello command
|
|
retransmissions (in hundredths of a second). This
|
|
represents the t1 timer as defined in RFC 904."
|
|
::= { egpNeighEntry 12 }
|
|
|
|
egpNeighIntervalPoll OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The interval between EGP poll command
|
|
retransmissions (in hundredths of a second). This
|
|
represents the t3 timer as defined in RFC 904."
|
|
::= { egpNeighEntry 13 }
|
|
|
|
egpNeighMode OBJECT-TYPE
|
|
SYNTAX INTEGER { active(1), passive(2) }
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The polling mode of this EGP entity, either
|
|
passive or active."
|
|
::= { egpNeighEntry 14 }
|
|
|
|
egpNeighEventTrigger OBJECT-TYPE
|
|
SYNTAX INTEGER { start(1), stop(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A control variable used to trigger operator-
|
|
initiated Start and Stop events. When read, this
|
|
variable always returns the most recent value that
|
|
egpNeighEventTrigger was set to. If it has not
|
|
been set since the last initialization of the
|
|
network management subsystem on the node, it
|
|
returns a value of `stop'.
|
|
|
|
When set, this variable causes a Start or Stop
|
|
event on the specified neighbor, as specified on
|
|
pages 8-10 of RFC 904. Briefly, a Start event
|
|
causes an Idle peer to begin neighbor acquisition
|
|
and a non-Idle peer to reinitiate neighbor
|
|
acquisition. A stop event causes a non-Idle peer
|
|
to return to the Idle state until a Start event
|
|
occurs, either via egpNeighEventTrigger or
|
|
otherwise."
|
|
::= { egpNeighEntry 15 }
|
|
|
|
|
|
-- additional EGP objects
|
|
|
|
egpAs OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The autonomous system number of this EGP entity."
|
|
::= { egp 6 }
|
|
|
|
|
|
-- the Transmission group
|
|
|
|
-- Based on the transmission media underlying each interface
|
|
-- on a system, the corresponding portion of the Transmission
|
|
-- group is mandatory for that system.
|
|
|
|
-- When Internet-standard definitions for managing
|
|
-- transmission media are defined, the transmission group is
|
|
-- used to provide a prefix for the names of those objects.
|
|
|
|
-- Typically, such definitions reside in the experimental
|
|
-- portion of the MIB until they are "proven", then as a
|
|
-- part of the Internet standardization process, the
|
|
-- definitions are accordingly elevated and a new object
|
|
-- identifier, under the transmission group is defined. By
|
|
-- convention, the name assigned is:
|
|
--
|
|
-- type OBJECT IDENTIFIER ::= { transmission number }
|
|
--
|
|
-- where "type" is the symbolic value used for the media in
|
|
-- the ifType column of the ifTable object, and "number" is
|
|
-- the actual integer value corresponding to the symbol.
|
|
|
|
|
|
-- the SNMP group
|
|
|
|
-- Implementation of the SNMP group is mandatory for all
|
|
-- systems which support an SNMP protocol entity. Some of
|
|
-- the objects defined below will be zero-valued in those
|
|
-- SNMP implementations that are optimized to support only
|
|
-- those functions specific to either a management agent or
|
|
-- a management station. In particular, it should be
|
|
-- observed that the objects below refer to an SNMP entity,
|
|
-- and there may be several SNMP entities residing on a
|
|
-- managed node (e.g., if the node is hosting acting as
|
|
-- a management station).
|
|
|
|
snmpInPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of Messages delivered to the
|
|
SNMP entity from the transport service."
|
|
::= { snmp 1 }
|
|
|
|
snmpOutPkts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Messages which were
|
|
passed from the SNMP protocol entity to the
|
|
transport service."
|
|
::= { snmp 2 }
|
|
|
|
snmpInBadVersions OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Messages which were
|
|
delivered to the SNMP protocol entity and were for
|
|
an unsupported SNMP version."
|
|
::= { snmp 3 }
|
|
|
|
snmpInBadCommunityNames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Messages delivered to
|
|
the SNMP protocol entity which used a SNMP
|
|
community name not known to said entity."
|
|
::= { snmp 4 }
|
|
|
|
snmpInBadCommunityUses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Messages delivered to
|
|
the SNMP protocol entity which represented an SNMP
|
|
operation which was not allowed by the SNMP
|
|
community named in the Message."
|
|
::= { snmp 5 }
|
|
|
|
snmpInASNParseErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of ASN.1 or BER errors
|
|
encountered by the SNMP protocol entity when
|
|
decoding received SNMP Messages."
|
|
::= { snmp 6 }
|
|
|
|
-- { snmp 7 } is not used
|
|
|
|
snmpInTooBigs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
delivered to the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`tooBig'."
|
|
::= { snmp 8 }
|
|
|
|
snmpInNoSuchNames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
delivered to the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`noSuchName'."
|
|
::= { snmp 9 }
|
|
|
|
snmpInBadValues OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
delivered to the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`badValue'."
|
|
::= { snmp 10 }
|
|
|
|
snmpInReadOnlys OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number valid SNMP PDUs which were
|
|
delivered to the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`readOnly'. It should be noted that it is a
|
|
protocol error to generate an SNMP PDU which
|
|
contains the value `readOnly' in the error-status
|
|
field, as such this object is provided as a means
|
|
of detecting incorrect implementations of the
|
|
SNMP."
|
|
::= { snmp 11 }
|
|
|
|
snmpInGenErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
delivered to the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`genErr'."
|
|
::= { snmp 12 }
|
|
|
|
snmpInTotalReqVars OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of MIB objects which have been
|
|
retrieved successfully by the SNMP protocol entity
|
|
as the result of receiving valid SNMP Get-Request
|
|
and Get-Next PDUs."
|
|
::= { snmp 13 }
|
|
|
|
snmpInTotalSetVars OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of MIB objects which have been
|
|
altered successfully by the SNMP protocol entity
|
|
as the result of receiving valid SNMP Set-Request
|
|
PDUs."
|
|
::= { snmp 14 }
|
|
|
|
snmpInGetRequests OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Get-Request PDUs which
|
|
have been accepted and processed by the SNMP
|
|
protocol entity."
|
|
::= { snmp 15 }
|
|
|
|
snmpInGetNexts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Get-Next PDUs which have
|
|
been accepted and processed by the SNMP protocol
|
|
entity."
|
|
::= { snmp 16 }
|
|
|
|
snmpInSetRequests OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Set-Request PDUs which
|
|
have been accepted and processed by the SNMP
|
|
protocol entity."
|
|
::= { snmp 17 }
|
|
|
|
snmpInGetResponses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Get-Response PDUs which
|
|
have been accepted and processed by the SNMP
|
|
protocol entity."
|
|
::= { snmp 18 }
|
|
|
|
snmpInTraps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Trap PDUs which have
|
|
been accepted and processed by the SNMP protocol
|
|
entity."
|
|
::= { snmp 19 }
|
|
|
|
snmpOutTooBigs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
generated by the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`tooBig.'"
|
|
::= { snmp 20 }
|
|
|
|
snmpOutNoSuchNames OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
generated by the SNMP protocol entity and for
|
|
which the value of the error-status is
|
|
`noSuchName'."
|
|
::= { snmp 21 }
|
|
|
|
snmpOutBadValues OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
generated by the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`badValue'."
|
|
::= { snmp 22 }
|
|
|
|
-- { snmp 23 } is not used
|
|
|
|
snmpOutGenErrs OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP PDUs which were
|
|
generated by the SNMP protocol entity and for
|
|
which the value of the error-status field is
|
|
`genErr'."
|
|
::= { snmp 24 }
|
|
|
|
snmpOutGetRequests OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Get-Request PDUs which
|
|
have been generated by the SNMP protocol entity."
|
|
::= { snmp 25 }
|
|
|
|
snmpOutGetNexts OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Get-Next PDUs which have
|
|
been generated by the SNMP protocol entity."
|
|
::= { snmp 26 }
|
|
|
|
snmpOutSetRequests OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Set-Request PDUs which
|
|
have been generated by the SNMP protocol entity."
|
|
::= { snmp 27 }
|
|
|
|
snmpOutGetResponses OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Get-Response PDUs which
|
|
have been generated by the SNMP protocol entity."
|
|
::= { snmp 28 }
|
|
|
|
snmpOutTraps OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of SNMP Trap PDUs which have
|
|
been generated by the SNMP protocol entity."
|
|
::= { snmp 29 }
|
|
|
|
snmpEnableAuthenTraps OBJECT-TYPE
|
|
SYNTAX INTEGER { enabled(1), disabled(2) }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether the SNMP agent process is
|
|
permitted to generate authentication-failure
|
|
traps. The value of this object overrides any
|
|
configuration information; as such, it provides a
|
|
means whereby all authentication-failure traps may
|
|
be disabled.
|
|
|
|
Note that it is strongly recommended that this
|
|
object be stored in non-volatile memory so that it
|
|
remains constant between re-initializations of the
|
|
network management system."
|
|
::= { snmp 30 }
|
|
|
|
|
|
coldStart TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
DESCRIPTION
|
|
"A coldStart trap signifies that the sending
|
|
protocol entity is reinitializing itself such
|
|
that the agent's configuration or the rotocol
|
|
entity implementation may be altered."
|
|
::= 0
|
|
|
|
warmStart TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
DESCRIPTION
|
|
"A warmStart trap signifies that the sending
|
|
protocol entity is reinitializing itself such
|
|
that neither the agent configuration nor the
|
|
protocol entity implementation is altered."
|
|
::= 1
|
|
|
|
linkDown TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
VARIABLES { ifIndex }
|
|
DESCRIPTION
|
|
"A linkDown trap signifies that the sending
|
|
protocol entity recognizes a failure in one of
|
|
the communication links represented in the
|
|
agent's configuration."
|
|
::= 2
|
|
|
|
linkUp TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
VARIABLES { ifIndex }
|
|
DESCRIPTION
|
|
"A linkUp trap signifies that the sending
|
|
protocol entity recognizes that one of the
|
|
communication links represented in the agent's
|
|
configuration has come up."
|
|
::= 3
|
|
|
|
authenticationFailure TRAP-TYPE
|
|
ENTERPRISE snmp
|
|
DESCRIPTION
|
|
"An authenticationFailure trap signifies that
|
|
the sending protocol entity is the addressee
|
|
of a protocol message that is not properly
|
|
authenticated. While implementations of the
|
|
SNMP must be capable of generating this trap,
|
|
they must also be capable of suppressing the
|
|
emission of such traps via an implementation-
|
|
specific mechanism."
|
|
::= 4
|
|
|
|
|
|
END
|