Source code of Windows XP (NT5)
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
|
|
//*++
//
// Copyright (c) 1991-1999 Microsoft Corporation
//
// Module Name:
//
// nb30.h
//
// Abstract:
//
// This module contains the definitions for portable NetBIOS 3.0
// support.
//
//--*/
#ifndef NCB_INCLUDED
#define NCB_INCLUDED
#if _MSC_VER > 1000
#pragma once
#endif
#ifdef __cplusplus
extern "C" {#endif
/****************************************************************
* * * Data structure templates * * * ****************************************************************/
#define NCBNAMSZ 16 /* absolute length of a net name */
#define MAX_LANA 254 /* lana's in range 0 to MAX_LANA inclusive */
/*
* Network Control Block */
typedef struct _NCB { UCHAR ncb_command; /* command code */ UCHAR ncb_retcode; /* return code */ UCHAR ncb_lsn; /* local session number */ UCHAR ncb_num; /* number of our network name */ PUCHAR ncb_buffer; /* address of message buffer */ WORD ncb_length; /* size of message buffer */ UCHAR ncb_callname[NCBNAMSZ]; /* blank-padded name of remote */ UCHAR ncb_name[NCBNAMSZ]; /* our blank-padded netname */ UCHAR ncb_rto; /* rcv timeout/retry count */ UCHAR ncb_sto; /* send timeout/sys timeout */ void (CALLBACK *ncb_post)( struct _NCB * ); /* POST routine address */ UCHAR ncb_lana_num; /* lana (adapter) number */ UCHAR ncb_cmd_cplt; /* 0xff => commmand pending */#ifdef _WIN64
UCHAR ncb_reserve[18]; /* reserved, used by BIOS */#else
UCHAR ncb_reserve[10]; /* reserved, used by BIOS */#endif
HANDLE ncb_event; /* HANDLE to Win32 event which */ /* will be set to the signalled */ /* state when an ASYNCH command */ /* completes */} NCB, *PNCB;
/*
* Structure returned to the NCB command NCBASTAT is ADAPTER_STATUS followed * by an array of NAME_BUFFER structures. */
typedef struct _ADAPTER_STATUS { UCHAR adapter_address[6]; UCHAR rev_major; UCHAR reserved0; UCHAR adapter_type; UCHAR rev_minor; WORD duration; WORD frmr_recv; WORD frmr_xmit;
WORD iframe_recv_err;
WORD xmit_aborts; DWORD xmit_success; DWORD recv_success;
WORD iframe_xmit_err;
WORD recv_buff_unavail; WORD t1_timeouts; WORD ti_timeouts; DWORD reserved1; WORD free_ncbs; WORD max_cfg_ncbs; WORD max_ncbs; WORD xmit_buf_unavail; WORD max_dgram_size; WORD pending_sess; WORD max_cfg_sess; WORD max_sess; WORD max_sess_pkt_size; WORD name_count;} ADAPTER_STATUS, *PADAPTER_STATUS;
typedef struct _NAME_BUFFER { UCHAR name[NCBNAMSZ]; UCHAR name_num; UCHAR name_flags;} NAME_BUFFER, *PNAME_BUFFER;
// values for name_flags bits.
#define NAME_FLAGS_MASK 0x87
#define GROUP_NAME 0x80
#define UNIQUE_NAME 0x00
#define REGISTERING 0x00
#define REGISTERED 0x04
#define DEREGISTERED 0x05
#define DUPLICATE 0x06
#define DUPLICATE_DEREG 0x07
/*
* Structure returned to the NCB command NCBSSTAT is SESSION_HEADER followed * by an array of SESSION_BUFFER structures. If the NCB_NAME starts with an * asterisk then an array of these structures is returned containing the * status for all names. */
typedef struct _SESSION_HEADER { UCHAR sess_name; UCHAR num_sess; UCHAR rcv_dg_outstanding; UCHAR rcv_any_outstanding;} SESSION_HEADER, *PSESSION_HEADER;
typedef struct _SESSION_BUFFER { UCHAR lsn; UCHAR state; UCHAR local_name[NCBNAMSZ]; UCHAR remote_name[NCBNAMSZ]; UCHAR rcvs_outstanding; UCHAR sends_outstanding;} SESSION_BUFFER, *PSESSION_BUFFER;
// Values for state
#define LISTEN_OUTSTANDING 0x01
#define CALL_PENDING 0x02
#define SESSION_ESTABLISHED 0x03
#define HANGUP_PENDING 0x04
#define HANGUP_COMPLETE 0x05
#define SESSION_ABORTED 0x06
/*
* Structure returned to the NCB command NCBENUM. * * On a system containing lana's 0, 2 and 3, a structure with * length =3, lana[0]=0, lana[1]=2 and lana[2]=3 will be returned. */
typedef struct _LANA_ENUM { UCHAR length; // Number of valid entries in lana[]
UCHAR lana[MAX_LANA+1];} LANA_ENUM, *PLANA_ENUM;
/*
* Structure returned to the NCB command NCBFINDNAME is FIND_NAME_HEADER followed * by an array of FIND_NAME_BUFFER structures. */
typedef struct _FIND_NAME_HEADER { WORD node_count; UCHAR reserved; UCHAR unique_group;} FIND_NAME_HEADER, *PFIND_NAME_HEADER;
typedef struct _FIND_NAME_BUFFER { UCHAR length; UCHAR access_control; UCHAR frame_control; UCHAR destination_addr[6]; UCHAR source_addr[6]; UCHAR routing_info[18];} FIND_NAME_BUFFER, *PFIND_NAME_BUFFER;
/*
* Structure provided with NCBACTION. The purpose of NCBACTION is to provide * transport specific extensions to netbios. */
typedef struct _ACTION_HEADER { ULONG transport_id; USHORT action_code; USHORT reserved;} ACTION_HEADER, *PACTION_HEADER;
// Values for transport_id
#define ALL_TRANSPORTS "M\0\0\0"
#define MS_NBF "MNBF"
/****************************************************************
* * * Special values and constants * * * ****************************************************************/
/*
* NCB Command codes */
#define NCBCALL 0x10 /* NCB CALL */
#define NCBLISTEN 0x11 /* NCB LISTEN */
#define NCBHANGUP 0x12 /* NCB HANG UP */
#define NCBSEND 0x14 /* NCB SEND */
#define NCBRECV 0x15 /* NCB RECEIVE */
#define NCBRECVANY 0x16 /* NCB RECEIVE ANY */
#define NCBCHAINSEND 0x17 /* NCB CHAIN SEND */
#define NCBDGSEND 0x20 /* NCB SEND DATAGRAM */
#define NCBDGRECV 0x21 /* NCB RECEIVE DATAGRAM */
#define NCBDGSENDBC 0x22 /* NCB SEND BROADCAST DATAGRAM */
#define NCBDGRECVBC 0x23 /* NCB RECEIVE BROADCAST DATAGRAM */
#define NCBADDNAME 0x30 /* NCB ADD NAME */
#define NCBDELNAME 0x31 /* NCB DELETE NAME */
#define NCBRESET 0x32 /* NCB RESET */
#define NCBASTAT 0x33 /* NCB ADAPTER STATUS */
#define NCBSSTAT 0x34 /* NCB SESSION STATUS */
#define NCBCANCEL 0x35 /* NCB CANCEL */
#define NCBADDGRNAME 0x36 /* NCB ADD GROUP NAME */
#define NCBENUM 0x37 /* NCB ENUMERATE LANA NUMBERS */
#define NCBUNLINK 0x70 /* NCB UNLINK */
#define NCBSENDNA 0x71 /* NCB SEND NO ACK */
#define NCBCHAINSENDNA 0x72 /* NCB CHAIN SEND NO ACK */
#define NCBLANSTALERT 0x73 /* NCB LAN STATUS ALERT */
#define NCBACTION 0x77 /* NCB ACTION */
#define NCBFINDNAME 0x78 /* NCB FIND NAME */
#define NCBTRACE 0x79 /* NCB TRACE */
#define ASYNCH 0x80 /* high bit set == asynchronous */
/*
* NCB Return codes */
#define NRC_GOODRET 0x00 /* good return */
/* also returned when ASYNCH request accepted */#define NRC_BUFLEN 0x01 /* illegal buffer length */
#define NRC_ILLCMD 0x03 /* illegal command */
#define NRC_CMDTMO 0x05 /* command timed out */
#define NRC_INCOMP 0x06 /* message incomplete, issue another command */
#define NRC_BADDR 0x07 /* illegal buffer address */
#define NRC_SNUMOUT 0x08 /* session number out of range */
#define NRC_NORES 0x09 /* no resource available */
#define NRC_SCLOSED 0x0a /* session closed */
#define NRC_CMDCAN 0x0b /* command cancelled */
#define NRC_DUPNAME 0x0d /* duplicate name */
#define NRC_NAMTFUL 0x0e /* name table full */
#define NRC_ACTSES 0x0f /* no deletions, name has active sessions */
#define NRC_LOCTFUL 0x11 /* local session table full */
#define NRC_REMTFUL 0x12 /* remote session table full */
#define NRC_ILLNN 0x13 /* illegal name number */
#define NRC_NOCALL 0x14 /* no callname */
#define NRC_NOWILD 0x15 /* cannot put * in NCB_NAME */
#define NRC_INUSE 0x16 /* name in use on remote adapter */
#define NRC_NAMERR 0x17 /* name deleted */
#define NRC_SABORT 0x18 /* session ended abnormally */
#define NRC_NAMCONF 0x19 /* name conflict detected */
#define NRC_IFBUSY 0x21 /* interface busy, IRET before retrying */
#define NRC_TOOMANY 0x22 /* too many commands outstanding, retry later */
#define NRC_BRIDGE 0x23 /* ncb_lana_num field invalid */
#define NRC_CANOCCR 0x24 /* command completed while cancel occurring */
#define NRC_CANCEL 0x26 /* command not valid to cancel */
#define NRC_DUPENV 0x30 /* name defined by anther local process */
#define NRC_ENVNOTDEF 0x34 /* environment undefined. RESET required */
#define NRC_OSRESNOTAV 0x35 /* required OS resources exhausted */
#define NRC_MAXAPPS 0x36 /* max number of applications exceeded */
#define NRC_NOSAPS 0x37 /* no saps available for netbios */
#define NRC_NORESOURCES 0x38 /* requested resources are not available */
#define NRC_INVADDRESS 0x39 /* invalid ncb address or length > segment */
#define NRC_INVDDID 0x3B /* invalid NCB DDID */
#define NRC_LOCKFAIL 0x3C /* lock of user area failed */
#define NRC_OPENERR 0x3f /* NETBIOS not loaded */
#define NRC_SYSTEM 0x40 /* system error */
#define NRC_PENDING 0xff /* asynchronous command is not yet finished */
/****************************************************************
* * * main user entry point for NetBIOS 3.0 * * * * Usage: result = Netbios( pncb ); * ****************************************************************/
UCHARAPIENTRYNetbios( PNCB pncb );
/****************************************************************
* * * Prefix for callback routines * * * * Usage in a declaration: NCB_POST MyPostRoutine( PNCB pncb ); * ****************************************************************/
#define NCB_POST void CALLBACK
#ifdef __cplusplus
}#endif
#endif /* NCB_INCLUDED */
|
