|
|
/*++
Copyright (c) 1992-1996 Microsoft Corporation
Module Name:
wddata.h
Abstract:
This module contains all the global data used by the Western Digital driver.
Environment:
Kernel mode
Revision History:
--*/
#include "dderror.h"
#include "devioctl.h"
#include "miniport.h"
#include "ntddvdeo.h"
#include "video.h"
#include "wdvga.h"
#include "cmdcnst.h"
#include "pvgaequ.h"
//
// On machines without a SVGA BIOS, we need to reset the WD chip into a
// state where the standard VGA BIOS can set a mode. The reset code
// below sets the WD chip back into this state.
//
USHORT Reset[] ={
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) ,
//
// a strange strip which duplicates scan lines appears on the
// stn panel if I execute this reset code.
//
// here is the line which causes the problem. Lets just leave it
// out. If I need it for the other thinkpads, I'll figure out
// a way to add it back.
//
//OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
//OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_244LP ,
OW, GRAPH_ADDRESS_PORT, 0x0009, OW, GRAPH_ADDRESS_PORT, 0x000a, OW, GRAPH_ADDRESS_PORT, 0x400e,
OW, CRTC_ADDRESS_PORT_COLOR, 0x4f09, OW, CRTC_ADDRESS_PORT_COLOR, 0x0d0a, OW, CRTC_ADDRESS_PORT_COLOR, 0x0e0b, OW, GRAPH_ADDRESS_PORT, 0xc50b, OW, GRAPH_ADDRESS_PORT, 0xc52b, OW, SEQ_ADDRESS_PORT, 0x6511, OW, SEQ_ADDRESS_PORT, 0x0d31,
/*
OW, 0x24, 0x4f09, OW, 0x24, 0x0d0a, OW, 0x24, 0x0e0b, OW, 0x1e, 0xc50b, OW, 0x1e, 0xc52b, OW, 0x14, 0x6511, OW, 0x14, 0x0d31, */
EOD
};
//
//
// Make everything else in this module pageable
//
//
#if defined(ALLOC_PRAGMA)
#pragma data_seg("PAGE")
#endif
//
// This structure describes to which ports access is required.
//
VIDEO_ACCESS_RANGE VgaAccessRange[] = {{ VGA_BASE_IO_PORT, 0x00000000, // 64-bit linear base address
// of range
VGA_START_BREAK_PORT - VGA_BASE_IO_PORT + 1, // # of ports
1, // range is in I/O space
1, // range should be visible
0 // range should be shareable
},{ VGA_END_BREAK_PORT, 0x00000000, VGA_MAX_IO_PORT - VGA_END_BREAK_PORT + 1, 1, 1, 0},{ 0x000A0000, 0x00000000, 0x00020000, 0, 1, 0},//
// These are extended registers found only on SOME advanced WD cards.
// so try to map them in if possible
//
{ WD_EXT_PORT_START, 0x00000000, WD_EXT_PORT_END - WD_EXT_PORT_START + 1, 1, 1, 0},
//
// Video Setup
//
{ 0x00000102, 0x00000000, 1, 1, 1, 0},
//
// Flat Panel Control Addresss/Data
//
{ 0x00000D00, 0x00000000, 2, 1, 1, 0},
//
// IBM's System Management API Port location
//
{ 0x000015EE, 0x00000000, 2, 1, 1, 0}
};
//
// Validator Port list.
// This structure describes all the ports that must be hooked out of the V86
// emulator when a DOS app goes to full-screen mode.
// The structure determines to which routine the data read or written to a
// specific port should be sent.
//
EMULATOR_ACCESS_ENTRY VgaEmulatorAccessEntries[] = {
//
// Traps for byte OUTs.
//
{ 0x000003b0, // range start I/O address
0xC, // range length
Uchar, // access size to trap
EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, // types of access to trap
FALSE, // does not support string accesses
(PVOID)VgaValidatorUcharEntry // routine to which to trap
},
{ 0x000003c0, // range start I/O address
0x20, // range length
Uchar, // access size to trap
EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, // types of access to trap
FALSE, // does not support string accesses
(PVOID)VgaValidatorUcharEntry // routine to which to trap
},
//
// Let the BIOS read the extended registers when it's running a DOS
// app from fullscreen
//
{ WD_EXT_PORT_START, // range start I/O address
WD_EXT_PORT_END - WD_EXT_PORT_START + 1, // length
Uchar, // access size to trap
EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, // types of access to trap
FALSE, // does not support string accesses
(PVOID)VgaValidatorUcharEntry // routine to which to trap
},
//
// Traps for word OUTs.
//
{ 0x000003b0, 0x06, Ushort, EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, FALSE, (PVOID)VgaValidatorUshortEntry },
{ 0x000003c0, 0x10, Ushort, EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, FALSE, (PVOID)VgaValidatorUshortEntry },
//
// Let the BIOS read the extended registers when it's running a DOS
// app from fullscreen
//
{ WD_EXT_PORT_START, (WD_EXT_PORT_END - WD_EXT_PORT_START + 1)/2, Ushort, EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, FALSE, (PVOID)VgaValidatorUshortEntry },
//
// Traps for dword OUTs.
//
{ 0x000003b0, 0x03, Ulong, EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, FALSE, (PVOID)VgaValidatorUlongEntry },
{ 0x000003c0, 0x08, Ulong, EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, FALSE, (PVOID)VgaValidatorUlongEntry },
//
// Let the BIOS read the extended registers when it's running a DOS
// app from fullscreen
//
{ WD_EXT_PORT_START, (WD_EXT_PORT_END - WD_EXT_PORT_START + 1)/4, Ulong, EMULATOR_READ_ACCESS | EMULATOR_WRITE_ACCESS, FALSE, (PVOID)VgaValidatorUlongEntry }
};
//
// Used to trap only the sequncer and the misc output registers
//
VIDEO_ACCESS_RANGE MinimalVgaValidatorAccessRange[] = {{ VGA_BASE_IO_PORT, 0x00000000, VGA_START_BREAK_PORT - VGA_BASE_IO_PORT + 1, 1, 1, // <- enable range IOPM so that it is not trapped.
0},{ VGA_END_BREAK_PORT, 0x00000000, VGA_MAX_IO_PORT - VGA_END_BREAK_PORT + 1, 1, 1, 0},{ VGA_BASE_IO_PORT + MISC_OUTPUT_REG_WRITE_PORT, 0x00000000, 0x00000001, 1, 0, 0},{ VGA_BASE_IO_PORT + SEQ_ADDRESS_PORT, 0x00000000, 0x00000002, 1, 0, 0}};
//
// Used to trap all registers
//
VIDEO_ACCESS_RANGE FullVgaValidatorAccessRange[] = {{ VGA_BASE_IO_PORT, 0x00000000, VGA_START_BREAK_PORT - VGA_BASE_IO_PORT + 1, 1, 0, // <- disable range in the IOPM so that it is trapped.
0},{ VGA_END_BREAK_PORT, 0x00000000, VGA_MAX_IO_PORT - VGA_END_BREAK_PORT + 1, 1, 0, 0}};
USHORT MODESET_MODEX_320_200[] = { OW, SEQ_ADDRESS_PORT, 0x0604,
OWM, CRTC_ADDRESS_PORT_COLOR, 2, 0xe317, 0x0014,
EOD};
USHORT MODESET_MODEX_320_240[] = { OWM, SEQ_ADDRESS_PORT, 2, 0x0604, 0x0100,
OB, MISC_OUTPUT_REG_WRITE_PORT, 0xe3,
OW, SEQ_ADDRESS_PORT, 0x0300,
OB, CRTC_ADDRESS_PORT_COLOR, 0x11,
METAOUT+MASKOUT, CRTC_DATA_PORT_COLOR, 0x7f, 0x00,
OWM, CRTC_ADDRESS_PORT_COLOR, 10, 0x0d06, 0x3e07, 0x4109, 0xea10, 0xac11, 0xdf12, 0x0014, 0xe715, 0x0616, 0xe317,
OW, SEQ_ADDRESS_PORT, 0x0f02,
EOD};
USHORT MODESET_MODEX_320_400[] = { OW, SEQ_ADDRESS_PORT, 0x0604,
OWM, CRTC_ADDRESS_PORT_COLOR, 3, 0xe317, 0x0014, 0x4009,
EOD};
USHORT MODESET_MODEX_320_480[] = { OWM, SEQ_ADDRESS_PORT, 2, 0x0604, 0x0100,
OB, MISC_OUTPUT_REG_WRITE_PORT, 0xe3,
OW, SEQ_ADDRESS_PORT, 0x0300,
OB, CRTC_ADDRESS_PORT_COLOR, 0x11,
METAOUT+MASKOUT, CRTC_DATA_PORT_COLOR, 0x7f, 0x00,
OWM, CRTC_ADDRESS_PORT_COLOR, 10, 0x0d06, 0x3e07, 0x4109, 0xea10, 0xac11, 0xdf12, 0x0014, 0xe715, 0x0616, 0xe317,
OW, SEQ_ADDRESS_PORT, 0x0f02,
OW, CRTC_ADDRESS_PORT_COLOR, 0x4009,
EOD};
/**************************************************************************
* ** Western Digital Color text mode, 640x350, 8x14 char ** ***************************************************************************/
USHORT WDVGA_TEXT_1[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, SEQ_ADDRESS_PORT, 5, 0x0100,0x0101,0x0302,0x0003,0x0204, // program up sequencer
OB, MISC_OUTPUT_REG_WRITE_PORT, 0xa3,
OW, GRAPH_ADDRESS_PORT, 0x0e06, // EndSyncResetCmd
OB, SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x05,0x00,0x00,0x00,0x42,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,0x00,0x4d,0xb,0xc,0x0,0x0,0x0,0x0, 0x83,0x85,0x5d,0x28,0x1f,0x63,0xba,0xa3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, //
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x14,0x7,0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, 0x00,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x02,0x00,0x00,0x05,
METAOUT+INDXOUT, //
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x0,0x0,0x0,0x0,0x10,0x0e,0x0,0x0FF,
OB, DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
EOD};
USHORT WDVGA_640x480x256_60hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
/*
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31, */
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_s32 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x0d , // Dot Clock = 25.175MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2c11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x53,0x9f,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x2C,0xDF,0x50,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x8bpp @ 72Hz
// Displays: 640x480 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480x256_72hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_s32 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * 0x63 , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * 0x86 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * 0x54 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * 0x99 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x1d , // Dot Clock = 31.500MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2F11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x63,0x4F,0x50,0x86,0x54,0x99,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEC,0x2F,0xDF,0x50,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x8bpp @ 75Hz
// Displays: 640x480 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480x256_75hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_s32 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x1d , // Dot Clock = 31.500MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2C11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x53,0x9f,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x2C,0xDF,0x50,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x16bpp @ 60Hz
// Displays: 640x480 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480x64k_60hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * (pr17_all | 0x10) ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_s32 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x0d , // Dot Clock = 25.175MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2C11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x53,0x9f,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x2C,0xDF,0xA0,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x16bpp @ 72Hz
// Displays: 640x480 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480x64k_72hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * (pr17_all | 0x10) ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_s32 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * 0x63 , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * 0x86 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * 0x54 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * 0x99 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x1d , // Dot Clock = 31.500MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2F11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x63,0x4F,0x50,0x86,0x54,0x99,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEC,0x2F,0xDF,0xA0,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x16bpp @ 75Hz
// Displays: 640x480 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480x64k_75hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * (pr17_all | 0x10) ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_s32 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_s32 , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x1d , // Dot Clock = 31.500MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2C11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x53,0x9f,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x2C,0xDF,0xA0,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 800x600x8bpp @ 60Hz
// Displays: 800x600 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_800x600x256_SVGA[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_tft800 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_tft800 , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_tft800 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x20 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_tft800, OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0x00 | 0x00 ), // Sync Polarity (H,V)=(+,+)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x15 , // Dot Clock = 39.822MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2c11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7f,0x63,0x64,0x82,0x6b,0x1b,0x72,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x58,0x2c,0x57,0x64,0x40,0x58,0x71,0xe3,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 800x600x16bpp @ 56Hz
// Displays: 800x600 Color TFT LCD + External CRT simultaneous display mode
//
USHORT WDVGA_800x600x64K_SVGA[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * (pr15_all | 0x40) , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * (pr17_all | 0x10) ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_tft800 , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_tft800 , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_s32 , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_tft800 & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * 0x7b , OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * 0x9e , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * 0x69 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * 0x92 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * 0x6f , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x20 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * 0x2a , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_tft800, OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * 0x6f , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0x00 | 0x0c ), // Sync Polarity (H,V)=(+,+)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x0d , // Dot Clock = 36.000MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2a11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7b,0x63,0x64,0x9e,0x69,0x92,0x6f,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x58,0x2a,0x57,0xc8,0x40,0x58,0x6f,0xe3,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 800x600x8bpp @ 60Hz
// Displays: External CRT only display mode
//
USHORT WDVGA_800x600x256_60hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_crt_tft , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0x00 | 0x00 ), // Sync Polarity (H,V)=(+,+)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x15 , // Dot Clock = 39.822MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2c11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7f,0x63,0x64,0x82,0x6b,0x1b,0x72,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x58,0x2c,0x57,0x64,0x40,0x58,0x71,0xe3,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 800x600x8bpp @ 72Hz
// Displays: External CRT only display mode
//
USHORT WDVGA_800x600x256_72hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_crt_tft , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0x00 | 0x04 ), // Sync Polarity (H,V)=(+,+)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x15 , // Dot Clock = 50.114MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x7311,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7E,0x63,0x64,0x81,0x6B,0x1A,0x96,0xF0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x6D,0x73,0x57,0x64,0x40,0x5A,0x94,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 800x600x16bpp @ 56Hz
// Displays: External CRT only display mode
//
USHORT WDVGA_800x600x64k_56hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * (pr15_all | 0x40) , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * (pr17_all | 0x10) ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_crt_tft , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0x00 | 0x0c ), // Sync Polarity (H,V)=(+,+)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x0d , // Dot Clock = 36.000MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2a11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7b,0x63,0x64,0x9e,0x69,0x92,0x6f,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x58,0x2a,0x57,0xc8,0x40,0x58,0x6f,0xe3,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 1024x768x8bpp @ 60Hz
// Displays: External CRT only display mode
//
USHORT WDVGA_1024x768x256_60hz[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * (pr15_all | 0x40) , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_crt_tft , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x08 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x0d , // Dot Clock = 65.000MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2711,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0xa3,0x7f,0x80,0x06,0x84,0x95,0x24,0xfd,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x01,0x27,0xff,0x80,0x40,0x00,0x24,0xe3,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 1024x768x8bpp @ 43.5Hz (interlaced)
// Displays: External CRT only display mode
//
USHORT WDVGA_1024x768x256_int[] = {
OW, CRTC_ADDRESS_PORT_COLOR, 0x8c11, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x412e, OW, SEQ_ADDRESS_PORT, 0x1d31,
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31,
// OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * 0x34 , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * 0x2a , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * 0x4b , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 0x00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_crt_tft , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_all , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_crt , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0303,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0x00 | 0x08 ), // Sync Polarity (H,V)=(+,+)
OW, SEQ_ADDRESS_PORT , pr69 + 0x100 * 0x64 , OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x05 , // Dot Clock = 44.744MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2311,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x99,0x7F,0x7F,0x1C,0x82,0x19,0x97,0x1F,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0x7F,0x23,0x7F,0x80,0x40,0x7F,0x96,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x8bpp @ 60Hz
// Displays: 640x480 Color DSTN LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480_60STN[] = {
OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_244LP , OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_244LP ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_stnc & ~0x80), OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_stnc_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_stnc_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * 0x53 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * 0x9f , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * 0x0b , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * 0x53 , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x0d , // Dot Clock = 25.175MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2C11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x53,0x9f,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x8C,0xDF,0x50,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OW, GRAPH_ADDRESS_PORT, 0x8d0b, OW, GRAPH_ADDRESS_PORT, 0x010c, OW, GRAPH_ADDRESS_PORT, 0x410e, OW, GRAPH_ADDRESS_PORT, 0x8d2b, OW, GRAPH_ADDRESS_PORT, 0x012c, OW, GRAPH_ADDRESS_PORT, 0x412e,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x8bpp @ 72Hz
// Displays: 640x480 Color DSTN LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480_72STN[] = {
/*
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31, */
OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_244LP , OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_244LP ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_stnc & ~0x80), //OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_stnc_a2 ,
OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_stnc_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_stnc_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_stnc_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_stnc_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x1d , // Dot Clock = 31.500MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2F11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x63,0x4F,0x50,0x86,0x54,0x99,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEC,0x8F,0xDF,0x50,0x40,0xE7,0x4,0xE3,0xFF,
// ^ many need to by 0x8F
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OW, 0x1e, 0x8d0b, OW, 0x1e, 0x010c, OW, 0x1e, 0x410e, OW, 0x1e, 0x8d2b, OW, 0x1e, 0x012c, OW, 0x1e, 0x412e,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
//
// Video Mode: 640x480x8bpp @ 75Hz
// Displays: 640x480 Color DSTN LCD + External CRT simultaneous display mode
//
USHORT WDVGA_640x480_75STN[] = {
/*
OW, 0x24, 0x8c11, OW, 0x1e, 0x410e, OW, 0x1e, 0x412e, OW, 0x14, 0x1d31, */
OW, CRTC_ADDRESS_PORT_COLOR, pr12 + 0x100 * pr12_244LP , OW, CRTC_ADDRESS_PORT_COLOR, pr13 + 0x100 * pr13_all , OW, CRTC_ADDRESS_PORT_COLOR, pr14 + 0x100 * pr14_all , OW, CRTC_ADDRESS_PORT_COLOR, pr15 + 0x100 * pr15_all , OW, CRTC_ADDRESS_PORT_COLOR, pr16 + 0x100 * (pr16_all & 00) , OW, CRTC_ADDRESS_PORT_COLOR, pr17 + 0x100 * pr17_244LP ,
OW, CRTC_ADDRESS_PORT_COLOR, pr18 + 0x100 * pr18_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr19 + 0x100 * pr19_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr39 + 0x100 * pr39_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr1a + 0x100 * pr1a_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr36 + 0x100 * pr36_all , OW, CRTC_ADDRESS_PORT_COLOR, pr37 + 0x100 * pr37_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr18a+ 0x100 * pr18a_all ,// OW, CRTC_ADDRESS_PORT_COLOR, pr41 + 0x100 * pr41_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr44 + 0x100 * pr44_all ,
OW, CRTC_ADDRESS_PORT_COLOR, pr35 + 0x100 * pr35_all ,
// CRTC shadows
OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * (crtc11_stnc & ~0x80), //OW, CRTC_ADDRESS_PORT_COLOR, 0x00 + 0x100 * crtc00_stnc_iso_a2 ,
OW, CRTC_ADDRESS_PORT_COLOR, 0x02 + 0x100 * crtc02_stnc_iso_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x03 + 0x100 * crtc03_stnc_iso_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x04 + 0x100 * crtc04_stnc_iso_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x05 + 0x100 * crtc05_stnc_iso_a2 , OW, CRTC_ADDRESS_PORT_COLOR, 0x06 + 0x100 * crtc06_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x07 + 0x100 * crtc07_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x09 + 0x100 * 0x00 , OW, CRTC_ADDRESS_PORT_COLOR, 0x10 + 0x100 * crtc10_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x11 + 0x100 * crtc11_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x15 + 0x100 * crtc15_stnc , OW, CRTC_ADDRESS_PORT_COLOR, 0x16 + 0x100 * crtc16_stnc , OW, CRTC_ADDRESS_PORT_COLOR, pr1b + 0x100 * pr1b_unlock_pr ,
// SEQ index 1h-4h
OWM, SEQ_ADDRESS_PORT, 5, 0x0100, 0x0101,0x0f02,0x0003,0x0e04,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
( 0x23 | 0xc0 | 0x00 ), // Sync Polarity (H,V)=(-,-)
OW, SEQ_ADDRESS_PORT , pr68 + 0x100 * 0x1d , // Dot Clock = 31.500MHz
OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x2C11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x53,0x9f,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x8C,0xDF,0x50,0x40,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x41,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f,0xff,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on
ATT_ADDRESS_PORT, VIDEO_ENABLE,
OB, // feature control
FEAT_CTRL_WRITE_PORT_COLOR, 0x04,
OW, 0x1e, 0x8d0b, OW, 0x1e, 0x010c, OW, 0x1e, 0x410e, OW, 0x1e, 0x8d2b, OW, 0x1e, 0x012c, OW, 0x1e, 0x412e,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
EOD};
#ifndef INT10_MODE_SET // should be #ifndef
/**************************************************************************
* ** Western Digital Color text mode, 720x400, 9x16 char ** ***************************************************************************/
USHORT WDVGA_TEXT_0[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, SEQ_ADDRESS_PORT, 5, 0x0100,0x0001,0x0302,0x0003,0x0204, // program up sequencer
OB, MISC_OUTPUT_REG_WRITE_PORT, 0x67,
OW, GRAPH_ADDRESS_PORT, 0x0e06, // EndSyncResetCmd
OB, SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x05,0x00,0x00,0x00,0x42,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, CRTC_ADDRESS_PORT_COLOR, 0x0E11,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f,0x00,0x4f,0xd,0xe,0x0,0x0,0x0,0x0, 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, //
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x14,0x7,0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, 0x04,0x0,0x0F,0x8,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x02,0x00,0x00,0x05,
METAOUT+INDXOUT, //
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x0,0x0,0x0,0x0,0x10,0x0e,0x0,0x0FF,
OB, DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
EOD};
/**************************************************************************
* ** Western Digital Color graphics mode 0x12, 640x480 16 colors ** ***************************************************************************/
USHORT WDVGA_640x480[] = {
// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0100,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0xe3,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x05,0x00,0x00,0x00,0x42,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x5F,0x4F,0x50,0x82,0x54,0x80,0x0B,0x3E,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0xEA,0x8C,0xDF,0x28,0x0,0xE7,0x4,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x14,0x7,0x38,0x39,0x3A,0x3B,0x3C,0x3D,0x3E,0x3F, 0x01,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x02,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x0,0x0,0x0,0x0,0x0,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
EOD};
/********************************************************************
* Western Digital 800x600 modes - vRefresh 60Hz. ** **********************************************************************/
//
// Color graphics mode 0x58, 800x600 16 colors 60Hz.
//
USHORT WDVGA_800x600_60hz[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0x23,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x45,0x00,0x00,0x00,0x00,0x00,
OW, // CRTC index 3e
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7f,0x63,0x64,0x82,0x6b,0x1b,0x72,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x58,0x8c,0x57,0x32,0x0,0x58,0x71,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x14,0x7,0x38,0x39,0x3A,0x3B,0x3C,0x3D,0x3E,0x3F, 0x01,0x0,0x0F,0x0,0x0,
// GRAPH index 9-fh
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x00,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
EOD};
/********************************************************************
* Western Digital 800x600 modes - vRefresh6 72Hz. ** **********************************************************************/
//
// Color graphics mode 0x58, 800x600 16 colors 72Hz.
//
USHORT WDVGA_800x600_72hz[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0x27,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x85,0x00,0x00,0x00,0x00,0x00,
OW, // CRTC index 3e
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7e,0x63,0x64,0x81,0x6b,0x1a,0x96,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x6d,0xf3,0x57,0x32,0x0,0x5a,0x94,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x14,0x7,0x38,0x39,0x3A,0x3B,0x3C,0x3D,0x3E,0x3F, 0x01,0x0,0x0F,0x0,0x0,
// GRAPH index 9-fh
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x00,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
EOD};
/********************************************************************
* Western Digital 800x600 modes - vRefresh 56Hz. ** **********************************************************************/
//
// Color graphics mode 0x58, 800x600 16 colors 56Hz.
//
USHORT WDVGA_800x600_56hz[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0xef,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x05,0x00,0x00,0x00,0x00,0x00,
OW, // CRTC index 3e
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x7b,0x63,0x64,0x9e,0x69,0x92,0x6f,0xf0,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x58,0x8a,0x57,0x32,0x0,0x58,0x6f,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x14,0x7,0x38,0x39,0x3A,0x3B,0x3C,0x3D,0x3E,0x3F, 0x01,0x0,0x0F,0x0,0x0,
// GRAPH index 9-fh
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x02,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
EOD};
/**************************************************************************
* Western Digital 1024x768 modes - vRefresh 60Hz. ** ***************************************************************************/
//
// Color graphics mode 0x5d, 1024x768 16 colors. 60Hz non-interlace
//
USHORT WDVGA_1024x768_60hz[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0xeb,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x95,0x00,0x00,0x01,0x00,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0xa3,0x7f,0x80,0x06,0x87,0x98,0x24,0xf1,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0xff,0x85,0xff,0x40,0x0,0xff,0x23,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x01,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x02,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
//start of enable 64k read/write bank mode.
OW, // enable 64k single read/write bank
SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0xe511,
OW, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0xce0b, //end of enable 64k read/write bank mode.
EOD};
/**************************************************************************
* Western Digital 1024x768 modes - vRefresh 70Hz. ** ***************************************************************************/
//
// Color graphics mode 0x5d, 1024x768 16 colors. 70Hz non-interlace
//
USHORT WDVGA_1024x768_70hz[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0012,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0xeb,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0xa5,0x00,0x00,0x01,0x00,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0xa1,0x7f,0x80,0x04,0x86,0x97,0x24,0xf1,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0xff,0x85,0xff,0x40,0x0,0xff,0x23,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x01,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x02,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
//start of enable 64k read/write bank mode.
OW, // enable 64k single read/write bank
SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0xe511,
OW, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0xce0b, //end of enable 64k read/write bank mode.
EOD};
/**************************************************************************
* Western Digital 1024x768 modes - vRefresh 72Hz. ** ***************************************************************************/
//
// Color graphics mode 0x5d, 1024x768 16 colors. 72Hz non-interlace
//
USHORT WDVGA_1024x768_72hz[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0012,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0xef,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0xb5,0x00,0x00,0x01,0x00,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0xa3,0x7f,0x80,0x06,0x81,0x92,0x37,0xfd,0x00,0x60,0x0,0x0,0x0,0x0,0x0,0x0, 0x01,0x87,0xff,0x40,0x0,0x00,0x37,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x01,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x00,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
//start of enable 64k read/write bank mode.
OW, // enable 64k single read/write bank
SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0xe511,
OW, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0xce0b, //end of enable 64k read/write bank mode.
EOD};
/**************************************************************************
* Western Digital 1024x768 modes - vRefresh Interlace. ** ***************************************************************************/
//
// Color graphics mode 0x5d, 1024x768 16 colors. Default - Interlace
//
USHORT WDVGA_1024x768_int[] = {// SEQ index 7h-9h, 10h-14h
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 8, 0xf807,0x0008,0x0009,0xc510,0x6511,0x0412,0x8013,0x1014,
OWM, // start sync reset program up sequencer
SEQ_ADDRESS_PORT, 5, 0x0300,0x0101,0x0f02,0x0003,0x0604,
OB, MISC_OUTPUT_REG_WRITE_PORT, // Misc output register
0x2f,
OW, // Set chain mode in sync reset
GRAPH_ADDRESS_PORT, 0x0506, OB, // EndSyncResetCmd
SEQ_ADDRESS_PORT, IND_SYNC_RESET,
OB, SEQ_DATA_PORT, END_SYNC_RESET_VALUE,
// CRTC index 2ah-30h, 3eh
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, 7, // count
0x2a, // start index
0xf0,0x05,0x34,0x2a,0x0b,0x00,0x00,
OW, //
CRTC_ADDRESS_PORT_COLOR, 0x003e,
OW, // Unlock CRTC registers 0-7
CRTC_ADDRESS_PORT_COLOR, 0x0511,
METAOUT+INDXOUT, // program crtc registers
CRTC_ADDRESS_PORT_COLOR, VGA_NUM_CRTC_PORTS, // count
0, // start index
0x99,0x7f,0x7f,0x1c,0x83,0x19,0x97,0x1f,0x00,0x40,0x0,0x0,0x0,0x0,0x0,0x0, 0x7f,0x83,0x7F,0x40,0x0,0x7f,0x96,0xE3,0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
METAOUT+ATCOUT, // program attribute controller registers
ATT_ADDRESS_PORT, // port
VGA_NUM_ATTRIB_CONT_PORTS, // count
0, // start index
0x0,0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0xA,0xB,0xC,0xD,0xE,0xF, 0x01,0x0,0x0F,0x0,0x0,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
7, // count
9, // start index
0x00,0x00,0xc6,0x00,0x00,0x00,0x05,
METAOUT+INDXOUT, // program graphics controller registers
GRAPH_ADDRESS_PORT, // port
VGA_NUM_GRAPH_CONT_PORTS, // count
0, // start index
0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x0F,0x0FF,
OB, // DAC mask registers
DAC_PIXEL_MASK_PORT, 0xFF,
IB, // prepare atc for writing
INPUT_STATUS_1_COLOR,
OB, // turn video on.
ATT_ADDRESS_PORT, VIDEO_ENABLE,
//start of enable 64k read/write bank mode.
OW, // enable 64k single read/write bank
SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0xe511,
OW, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0xce0b, //end of enable 64k read/write bank mode.
EOD};#else//!INT10_MODE_SET
USHORT WDVGA_1K_WIDE[] = { OW, // stretch scans to 1k
CRTC_ADDRESS_PORT_COLOR, 0x8013,
EOD};
USHORT WDVGA_RW_BANK[] = { OW, //unlock SEQ ext. regs for 90c11
SEQ_ADDRESS_PORT, 0x4806,
OB, SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0x11, METAOUT+MASKOUT, SEQ_DATA_PORT, 0x7f, 0x80,
OB, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0x0b, METAOUT+MASKOUT, GRAPH_DATA_PORT, 0xf7, 0x08,
EOD};
USHORT WDVGA_RW_BANK_1K_WIDE[] = { OW, // stretch scans to 1k
CRTC_ADDRESS_PORT_COLOR, 0x8013,
OW, //unlock SEQ ext. regs for 90c11
SEQ_ADDRESS_PORT, 0x4806,
OB, SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0x11, METAOUT+MASKOUT, SEQ_DATA_PORT, 0x7f, 0x80,
OB, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0x0b, METAOUT+MASKOUT, GRAPH_DATA_PORT, 0xf7, 0x08,
EOD};
USHORT WDVGA_1928_STRETCH[] = { OW, CRTC_ADDRESS_PORT_COLOR, 0xf113, // stretch to 1928 bytes
OW, //unlock SEQ ext. regs for 90c11
SEQ_ADDRESS_PORT, 0x4806,
OB, SEQ_ADDRESS_PORT, // set 3c4.11 bit #7
0x11, METAOUT+MASKOUT, SEQ_DATA_PORT, 0x7f, 0x80,
OB, // enable PR0B register
GRAPH_ADDRESS_PORT, // set 3ce.0b bit #3
0x0b, METAOUT+MASKOUT, GRAPH_DATA_PORT, 0xf7, 0x08,
EOD};
#endif
//
// Memory map table -
//
// These memory maps are used to save and restore the physical video buffer.
//
MEMORYMAPS MemoryMaps[] = {
// length start
// ------ -----
{ 0x08000, 0xB0000}, // all mono text modes (7)
{ 0x08000, 0xB8000}, // all color text modes (0, 1, 2, 3,
{ 0x20000, 0xA0000}, // all VGA graphics modes
};
//
// Video mode table - contains information and commands for initializing each
// mode. These entries must correspond with those in VIDEO_MODE_VGA. The first
// entry is commented; the rest follow the same format, but are not so
// heavily commented.
//
VIDEOMODE ModesVGA[] = {
//
// Standard VGA modes.
//
//
// Mode index 0
// Color text mode 3, 720x400, 9x16 char cell (VGA).
//
{ VIDEO_MODE_COLOR, // flags that this mode is a color mode, but not graphics
4, // four planes
1, // one bit of color per plane
80, 25, // 80x25 text resolution
720, 400, // 720x400 pixels on screen
160, 0x10000, // 160 bytes per scan line, 64K of CPU-addressable bitmap
60, 0, // set frequency, non-interlaced mode.
NoBanking, // no banking supported or needed in this mode
MemMap_CGA, // the memory mapping is the standard CGA memory mapping
// of 32K at B8000
MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE, // Is mode valid or not
#ifdef INT10_MODE_SET
0xFF, 0x00, // mask to AND in for frequency
// Value used to set the frequency
0x3, // int10 mode number
NULL, NULL,#else
WDVGA_TEXT_0, // pointer to the command strings
#endif
},
//
// Mode index 1.
// Color text mode 3, 640x350, 8x14 char cell (EGA).
//
{ VIDEO_MODE_COLOR, 4, 1, 80, 25, 640, 350, 160, 0x10000, 60, 0, NoBanking, MemMap_CGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE,#ifdef INT10_MODE_SET
0xFF, 0x00, 0x3, NULL, NULL,#else
WDVGA_TEXT_1, // pointer to the command strings
#endif
},
//
//
// Mode index 2
// Standard VGA Color graphics mode 0x12, 640x480 16 colors.
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 80, 30, 640, 480, 80, 0x10000, 60, 0, NoBanking, MemMap_VGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE,#ifdef INT10_MODE_SET
0xFF, 0x00, 0x12, NULL, NULL,#else
WDVGA_640x480, // pointer to the command strings
#endif
},
#ifdef INT10_MODE_SET
//
// ModeX modes!
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 8, 1, 80,30, 320, 200, 80, 0x10000, 70, 0, NoBanking, MemMap_VGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE, 0xFF, 0x00, 0x13, NULL, MODESET_MODEX_320_200},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 8, 1, 80,30, 320, 240, 80, 0x10000, 60, 0, NoBanking, MemMap_VGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE, 0xFF, 0x00, 0x13, NULL, MODESET_MODEX_320_240},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 8, 1, 80,30, 320, 400, 80, 0x10000, 70, 0, NoBanking, MemMap_VGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE, 0xFF, 0x00, 0x13, NULL, MODESET_MODEX_320_400},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 8, 1, 80,30, 320, 480, 80, 0x10000, 60, 0, NoBanking, MemMap_VGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC | STN_MONO_LCD | UNKNOWN_LCD, FALSE, 0xFF, 0x00, 0x13, NULL, MODESET_MODEX_320_480},
#endif
//
// Beginning of SVGA modes
//
//
// Mode index 3
// 800x600 16 colors. 60hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 100, 37, 800, 600, 100, 0x10000, 60, 0, NoBanking, MemMap_VGA, MONITOR | IBM_F8532, FALSE,#ifdef INT10_MODE_SET
0x3F, 0x40, 0x58, NULL, NULL,#else
WDVGA_800x600_60hz, // pointer to the command strings
#endif
},
//
// Mode index 4
// 800x600 16 colors. 72hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 100, 37, 800, 600, 100, 0x10000, 72, 0, NoBanking, MemMap_VGA, MONITOR, FALSE,#ifdef INT10_MODE_SET
0x3F, 0x80, 0x58, NULL, NULL,#else
WDVGA_800x600_72hz, // pointer to the command strings
#endif
},
//
// Mode index 5
// 800x600 16 colors. 56hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 100, 37, 800, 600, 100, 0x10000, 56, 0, NoBanking, MemMap_VGA, MONITOR, FALSE,#ifdef INT10_MODE_SET
0x3F, 0x00, 0x58, NULL, NULL,#else
WDVGA_800x600_56hz, // pointer to the command strings
#endif
},
//
// Mode index 6
// 1024x768 non-interlaced 16 colors. 60hz
// Assumes 512K.
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 128, 48, 1024, 768, 128, 0x20000, 60, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE,#ifdef INT10_MODE_SET
0xCF, 0x10, 0x5d, NULL, WDVGA_RW_BANK,#else
WDVGA_1024x768_60hz, // pointer to the command strings
#endif
},
//
// Mode index 7
// 1024x768 non-interlaced 16 colors. 70hz
// Assumes 512K.
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 128, 48, 1024, 768, 128, 0x20000, 70, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE,#ifdef INT10_MODE_SET
0xCF, 0x20, 0x5d, NULL, WDVGA_RW_BANK,#else
WDVGA_1024x768_70hz, // pointer to the command strings
#endif
},
//
// Mode index 8
// 1024x768 non-interlaced 16 colors. 72hz
// Assumes 512K.
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 128, 48, 1024, 768, 128, 0x20000, 72, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE,#ifdef INT10_MODE_SET
0xCF, 0x30, 0x5d, NULL, WDVGA_RW_BANK,#else
WDVGA_1024x768_72hz, // pointer to the command strings
#endif
},
//
// Mode index 9
// 1024x768 interlaced 16 colors. 44hz
// Assumes 512K.
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 4, 1, 128, 48, 1024, 768, 128, 0x20000, 44, 1, NormalBanking, MemMap_VGA, MONITOR, FALSE,#ifdef INT10_MODE_SET
0xCF, 0x00, 0x5d, NULL, WDVGA_RW_BANK,#else
WDVGA_1024x768_int, // pointer to the command strings
#endif
},
#ifdef INT10_MODE_SET
// NOTE: 800x600 modes need 1Meg until we support broken rasters
//
// Mode index 11
// 800x600x256 56Hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 800, 600, 1024, 0x100000, 56, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE, 0x3F, 0x00, 0x5c, NULL, WDVGA_RW_BANK_1K_WIDE,},
//
// Mode index 12
// 800x600x256 60Hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 800, 600, 1024, 0x100000, 60, 0, NormalBanking, MemMap_VGA, MONITOR | IBM_F8532, FALSE, 0x3F, 0x40, 0x5c, WDVGA_800x600x256_60hz, WDVGA_RW_BANK_1K_WIDE,},
//
// Mode index 13
// 800x600x256 72Hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 800, 600, 1024, 0x100000, 72, 0, NormalBanking, MemMap_VGA, MONITOR | IBM_F8532, FALSE, 0x3F, 0x80, 0x5c, WDVGA_800x600x256_72hz, WDVGA_RW_BANK_1K_WIDE,},
//
// Mode index 14
// 1024x768x256 60Hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 1024, 768, 1024, 0x100000, 60, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE, 0xCF, 0x10, 0x60, WDVGA_1024x768x256_60hz, WDVGA_RW_BANK,},
//
// Mode index 15
// 1024x768x256 70hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 1024, 768, 1024, 0x100000, 70, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE, 0xCF, 0x20, 0x60, NULL, WDVGA_RW_BANK,},
//
//
// Mode index 16
// 1024x768x256 72hz
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 1024, 768, 1024, 0x100000, 72, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE, 0xCF, 0x30, 0x60, NULL, WDVGA_RW_BANK,},
// Mode index 17
// 1024x768x256 44Hz (Interlaced)
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 1024, 768, 1024, 0x100000, 44, 1, NormalBanking, MemMap_VGA, MONITOR, FALSE, 0xCF, 0x00, 0x60, WDVGA_1024x768x256_int, WDVGA_RW_BANK,},
//
// Mode index 18
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 16, 80, 30, 640, 480, 1928, 0x100000, 60, 0, NormalBanking, MemMap_VGA, MONITOR | IBM_F8515 | IBM_F8532 | TOSHIBA_DSTNC, FALSE, 0xFF, 0x00, 0x01110072, NULL, WDVGA_1928_STRETCH,},
#endif//INT10_MODE_SET
#ifdef INT10_MODE_SET
//
// Mode index 10
// 640x480x256
//
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 640, 480, 1024, 0x80000, 60, 0, NormalBanking, MemMap_VGA, IBM_F8515 | IBM_F8532 | UNKNOWN_LCD, FALSE, 0xFF, 0x00, 0x5f, WDVGA_640x480x256_60hz, WDVGA_RW_BANK_1K_WIDE,},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 640, 480, 1024, 0x80000, 72, 0, NormalBanking, MemMap_VGA, IBM_F8515 | IBM_F8532, FALSE, 0xFF, 0x00, 0x5f, WDVGA_640x480x256_72hz, WDVGA_RW_BANK_1K_WIDE,},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 640, 480, 1024, 0x80000, 75, 0, NormalBanking, MemMap_VGA, IBM_F8515 | IBM_F8532, FALSE, 0xFF, 0x00, 0x5f, WDVGA_640x480x256_75hz, WDVGA_RW_BANK_1K_WIDE,},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 640, 480, 1024, 0x80000, 60, 0, NormalBanking, MemMap_VGA, TOSHIBA_DSTNC, FALSE, 0xFF, 0x00, 0x5f, WDVGA_640x480_60STN, WDVGA_RW_BANK_1K_WIDE,},
{ VIDEO_MODE_COLOR+VIDEO_MODE_GRAPHICS, 1, 8, 80, 30, 640, 480, 1024, 0x80000, 60, 0, NormalBanking, MemMap_VGA, MONITOR, FALSE, 0xFF, 0x00, 0x5f, NULL, WDVGA_RW_BANK_1K_WIDE,},
#endif
};
ULONG NumVideoModes = sizeof(ModesVGA) / sizeof(VIDEOMODE);
//
//
// Data used to set the Graphics and Sequence Controllers to put the
// VGA into a planar state at A0000 for 64K, with plane 2 enabled for
// reads and writes, so that a font can be loaded, and to disable that mode.
//
// Settings to enable planar mode with plane 2 enabled.
//
USHORT EnableA000Data[] = { OWM, SEQ_ADDRESS_PORT, 1, 0x0100,
OWM, GRAPH_ADDRESS_PORT, 3, 0x0204, // Read Map = plane 2
0x0005, // Graphics Mode = read mode 0, write mode 0
0x0406, // Graphics Miscellaneous register = A0000 for 64K, not odd/even,
// graphics mode
OWM, SEQ_ADDRESS_PORT, 3, 0x0402, // Map Mask = write to plane 2 only
0x0404, // Memory Mode = not odd/even, not full memory, graphics mode
0x0300, // end sync reset
EOD};
//
// Settings to disable the font-loading planar mode.
//
USHORT DisableA000Color[] = { OWM, SEQ_ADDRESS_PORT, 1, 0x0100,
OWM, GRAPH_ADDRESS_PORT, 3, 0x0004, 0x1005, 0x0E06,
OWM, SEQ_ADDRESS_PORT, 3, 0x0302, 0x0204, 0x0300, // end sync reset
EOD
};
#if defined(ALLOC_PRAGMA)
#pragma data_seg()
#endif
|
