/* Copyright (c) 1991-1999 Microsoft Corporation */ /*-------------------------------------------------------------------*\ * * mmio.c * * Basic MMIO functions. * \*-------------------------------------------------------------------*/ /*--------------------------------------------------------------------*/ /* Revision history: * LaurieGr: Jan 92 Ported from win16. Source tree fork, not common code. * StephenE: Apr 92 Enabled UNICODE. */ /*--------------------------------------------------------------------*/ /*--------------------------------------------------------------------*/ /* Implementation notes: * * An HMMIO is in fact a PMMIO i.e. a pointer to a MMIOINFO. * This causes the code to be littered with casts. * Whoever exported MMIOINFO should learn about encapsulation and * all that stuff. sigh. * * The "current disk offset" is the disk offset (i.e. the location * in the disk file) that the next MMIOM_READ or MMIOM_WRITE will * read from or write to. The I/O procedure maintains the * field of the file's MMIO structure so that * is equal to the current disk offset. * * The "current buffered offset" is the disk offset that the next * mmioRead() or mmioWrite() call would read from or write to. * The current buffered offset is defined as * * + ( - ) * * since is the disk offset of the start of the buffer * and corresponds to the current buffered offset. * * If the file is unbuffered, then , , * and will always be NULL, and * will always be considered the "current buffered * offset", i.e. mmioRead() and mmioWrite() will read/write * at this offset. * * * Except right at the beginning of mmioOpen(), the MMIO_ALLOCBUF * flag is set if and only if the pchBuffer field points to a block * of global memory that MMIO has allocated. */ /*--------------------------------------------------------------------*/ #include "winmmi.h" #include "mmioi.h" /*--------------------------------------------------------------------*\ * Local function prototypes \*--------------------------------------------------------------------*/ static void NEAR PASCAL SetIOProc( LPCWSTR szFileName, LPMMIOINFO lpmmio); static LPMMIOPROC NEAR PASCAL RemoveIOProc(FOURCC fccIOProc, HANDLE htask); static LONG NEAR PASCAL mmioDiskIO(PMMIO pmmio, UINT uMsg, LPSTR pch, LONG cch); static UINT NEAR PASCAL mmioExpandMemFile(PMMIO pmmio, LONG lExpand); static LPMMIOPROC mmioInternalInstallIOProc( FOURCC fccIOProc, LPMMIOPROC pIOProc, DWORD dwFlags); /*--------------------------------------------------------------------*/ /* The I/O procedure map is a linked list of IOProcMapEntry structures. * The head of the list, is a pointer node to the last * entry registered. The first few elements of the list are the predefined * global IO procedures below -- these all have equal to NULL so * that no task can unregister them. * */ typedef struct IOProcMapEntryTag { FOURCC fccIOProc; // ID of installed I/O procedure LPMMIOPROC pIOProc; // I/O procedure address HANDLE hTask; // task that called mmioRegisterIOProc() struct IOProcMapEntryTag *pNext; // pointer to next IOProc entry } IOProcMapEntry, *pIOProcMapEntry; // MMIOPROC is defined in the public MMSYSTEM.H // typedef LONG (APIENTRY MMIOPROC)(LPSTR lpmmioinfo, UINT uMsg, LONG lParam1, LONG lParam2); MMIOPROC mmioDOSIOProc, mmioMEMIOProc; // standard I/O procedures static IOProcMapEntry gIOProcMaps[] = { { FOURCC_DOS, mmioDOSIOProc, NULL, &gIOProcMaps[1] }, { FOURCC_MEM, mmioMEMIOProc, NULL, NULL } }; // // Global head of list // static pIOProcMapEntry gIOProcMapHead = gIOProcMaps; #ifdef DUMPIOPROCLIST /* debug dump of ioproclist */ static void DumpIOProcList(void) { pIOProcMapEntry pph; dprintf(("gIOProcMapHead= %8x\n",gIOProcMapHead )); for (pph = gIOProcMapHead;pph ;pph=pph->pNext) { dprintf(( "fourcc=%c%c%c%c pioproc=%8x hTask=%8x\n" , pph->fccIOProc/16777216 , (pph->fccIOProc/65536)%256 , (pph->fccIOProc/256)%256 , (pph->fccIOProc)%256 , pph->pIOProc , pph->hTask )); } } /* DumpIOProcList */ #endif /* Call the IOProc in the info structure and return the result. Take due account of whether it is a 16 or 32 bit IOProc. */ static LRESULT IOProc(LPMMIOINFO lpmmioinfo, UINT uMsg, LPARAM lParam1, LPARAM lParam2) { /* just pass the call on */ return ((LPMMIOPROC)(lpmmioinfo->pIOProc)) ((LPSTR)lpmmioinfo, uMsg, lParam1, lParam2); } /* IOProc */ /*--------------------------------------------------------------------*/ /* @doc INTERNAL @func LPMMIOPROC | FindIOProc | This function locates the IOProcMapEntry for a previously installed IO procedure . */ /*--------------------------------------------------------------------*/ static pIOProcMapEntry FindIOProc(FOURCC fccIOProc, HANDLE htask) { IOProcMapEntry *pEnt; // an entry in linked list /* walk through the linked list, first looking for an entry with * identifier that was added by the current task, then * looking for global entries. */ for (pEnt = gIOProcMapHead; pEnt; pEnt = pEnt->pNext) if ((pEnt->fccIOProc == fccIOProc) && (pEnt->hTask == htask)) return pEnt; for (pEnt = gIOProcMapHead; pEnt; pEnt = pEnt->pNext) if ( (pEnt->fccIOProc == fccIOProc) // ?? && (pEnt->hTask ==NULL) ?? ) return pEnt; return NULL; } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @func LPMMIOPROC | RemoveIOProc | This function removes previously installed IO procedure. */ /*--------------------------------------------------------------------*/ static LPMMIOPROC PASCAL NEAR RemoveIOProc(FOURCC fccIOProc, HANDLE htask) { IOProcMapEntry *pEnt; // an entry in linked list IOProcMapEntry *pEntPrev; // the entry before /* walk through the linked list, looking for an entry with * identifier that was added by the current task */ for ( pEntPrev = NULL, pEnt = gIOProcMapHead ; pEnt ; pEntPrev = pEnt, pEnt = pEnt->pNext ) if ((pEnt->fccIOProc == fccIOProc) && (pEnt->hTask == htask)) { LPMMIOPROC pIOProc; pIOProc = pEnt->pIOProc; if (pEntPrev) pEntPrev->pNext = pEnt->pNext; else gIOProcMapHead = pEnt->pNext; FreeHandle((HMMIO) pEnt); return pIOProc; } return NULL; } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @func void | SetIOProc | This function sets the physical IO procedure based on either the file name or the parameters within the

structure passed. @parm LPCWSTR | szFilename | Specifies a pointer to a string containing the filename of the file to open. If no I/O procedure is @parm LPMMIOINFO | lpmmioinfo | Specifies a pointer to an structure containing extra parameters used by in determining the IO procedure to use. The element is set to the procedure found. @rdesc Nothing. */ /*--------------------------------------------------------------------*/ static void NEAR PASCAL SetIOProc( LPCWSTR szFileName, LPMMIOINFO lpmmio) { IOProcMapEntry *pEnt; // the entry in linked list /* If the IOProc is not given, see if the file name implies that * is either a RIFF compound file or some kind of * other registered storage system -- look for the last CFSEPCHAR in * the name, e.g. '+' in "foo.bnd+bar.hlp+blorg.dib", and figure * that the IOProc ID is the extension of the compound file name, * e.g. the extension of "foo.bnd+bar.hlp", i.e. 'HLP '. * * Alternatively, if is NULL, then assume that * adwInfo[0]> is a DOS file handle. */ if (lpmmio->pIOProc == NULL) { if (lpmmio->fccIOProc == 0) { if (szFileName != NULL) { LPWSTR pch; /* see if contains CFSEPCHAR */ if ((pch = wcsrchr(szFileName, CFSEPCHAR)) != 0) { /* find the extension that precedes CFSEPCHAR, * e.g. "hlp" in "foo.bnd+bar.hlp+blorg.dib" */ while ( (pch > szFileName) && (*pch != '.') && (*pch != ':') && (*pch != '\\') ) pch--; if (*pch == '.') { WCHAR aszFour[sizeof(FOURCC)+1]; int i; for (i = 0, pch++; i < sizeof(FOURCC); i++) if (*pch == CFSEPCHAR) aszFour[i] = (WCHAR)0; else aszFour[i] = *pch++; aszFour[sizeof(FOURCC)] = (WCHAR)0; lpmmio->fccIOProc = mmioStringToFOURCCW(aszFour, MMIO_TOUPPER); } } } /* if the caller didn't specify an IOProc, and the code above * didn't determine an IOProc ID, then the default is the DOS * IOProc. */ if (lpmmio->fccIOProc == 0) lpmmio->fccIOProc = FOURCC_DOS; } /* unless an IOProc address is specified explicitly, look up the * IOProc in the global IOProc ID-to-address table -- the default * is 'DOS' since we'll assume that custom storage system I/O * procedures would have been installed */ pEnt = FindIOProc( lpmmio->fccIOProc , lpmmio->htask ? lpmmio->htask : GetCurrentTask() ); if (pEnt && pEnt->pIOProc) { lpmmio->pIOProc = pEnt -> pIOProc; } else { lpmmio->pIOProc = mmioDOSIOProc; lpmmio->dwReserved1 = 0; } } } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @func void | mmioCleanupIOProcs | removes from the linked list entries installed with the given task handle @parm HANDLE | hTask | Specifies the task to clean up for @rdesc Nothing. @comm This will only be called to clean up a WOW task. */ /*--------------------------------------------------------------------*/ void mmioCleanupIOProcs(HANDLE hTask) { IOProcMapEntry *pEnt; IOProcMapEntry *pEntPrev; for (pEntPrev = NULL, pEnt = gIOProcMapHead; pEnt;) { if (pEnt->hTask == hTask) { dprintf1(("MMIOPROC handle (%04X) not closed.", pEnt)); if (pEntPrev) { pEntPrev->pNext = pEnt->pNext; FreeHandle((HMMIO)pEnt); pEnt = pEntPrev->pNext; } else { gIOProcMapHead = pEnt->pNext; FreeHandle((HMMIO)pEnt); pEnt = gIOProcMapHead; } } else { pEntPrev = pEnt; pEnt = pEnt->pNext; } } } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api UINT | mmioRename | This function renames the specified file. @parm LPCTSTR | szFilename | Specifies a pointer to a string containing the filename of the file to rename. @parm LPCTSTR | szNewFileName | Specifies a pointer to a string containing the new filename. @parm LPMMIOINFO | lpmmioinfo | Specifies a pointer to an structure containing extra parameters used by . If

is not NULL, all unused fields of the structure it references must be set to zero, including the reserved fields. @parm DWORD | dwRenameFlags | Specifies option flags for the rename operation. This should be set to zero. @rdesc The return value is zero if the file was renamed. Otherwise, the return value is an error code returned from or from the I/O procedure. */ /*--------------------------------------------------------------------*/ UINT APIENTRY mmioRenameW( LPCWSTR szFileName , LPCWSTR szNewFileName , LPCMMIOINFO lpmmioinfo , DWORD fdwRename ) { MMIOINFO mmioinfo; ZeroMemory( &mmioinfo, sizeof( MMIOINFO ) ); V_RPOINTER0(lpmmioinfo, sizeof(MMIOINFO), MMSYSERR_INVALPARAM); if (lpmmioinfo) { V_CALLBACK0((FARPROC)lpmmioinfo->pIOProc, MMSYSERR_INVALPARAM); mmioinfo = *lpmmioinfo; } SetIOProc(szFileName, &mmioinfo); if ( (mmioinfo.dwFlags & MMIO_UNICODEPROC ) || (mmioinfo.pIOProc == mmioDOSIOProc ) // or the DOS file IO Proc || (mmioinfo.pIOProc == mmioMEMIOProc ) ) { // or a memory file IO Proc /*------------------------------------------------------------*\ * We have an unicode IO Proc so use the given file names * without any conversion. \*------------------------------------------------------------*/ return (UINT)IOProc( &mmioinfo, MMIOM_RENAME, (LPARAM)szFileName, (LPARAM)szNewFileName ); } else { UINT uiRc; LPSTR pAsciiFileName; // Ascii version of szFileName LPSTR pAsciiNewFileName; // Ascii version of szNewFileName /*------------------------------------------------------------*\ * We have an ascii IO Proc so convert the given file names * into ascii. \*------------------------------------------------------------*/ pAsciiFileName = AllocAsciiStr( szFileName ); if ( pAsciiFileName == (LPSTR)NULL ) { return MMIOERR_OUTOFMEMORY; } pAsciiNewFileName = AllocAsciiStr( szNewFileName ); if ( pAsciiNewFileName == (LPSTR)NULL ) { FreeAsciiStr( pAsciiFileName ); return MMIOERR_OUTOFMEMORY; } uiRc = (UINT)IOProc( &mmioinfo, MMIOM_RENAME, (LPARAM)pAsciiFileName, (LPARAM)pAsciiNewFileName ); FreeAsciiStr( pAsciiFileName ); FreeAsciiStr( pAsciiNewFileName ); return uiRc; } } UINT APIENTRY mmioRenameA( LPCSTR szFileName , LPCSTR szNewFileName , LPCMMIOINFO lpmmioinfo , DWORD fdwRename ) { MMIOINFO mmioinfo; LPWSTR pUnicodeFileName; LPWSTR pUnicodeNewFileName; UINT uiRc; ZeroMemory( &mmioinfo, sizeof( MMIOINFO ) ); V_RPOINTER0(lpmmioinfo, sizeof(MMIOINFO), MMSYSERR_INVALPARAM); if (lpmmioinfo) { V_CALLBACK0((FARPROC)lpmmioinfo->pIOProc, MMSYSERR_INVALPARAM); mmioinfo = *lpmmioinfo; } /*----------------------------------------------------------------*\ * SetIOProc only works with unicode strings, therefore we always * have to convert szFileName to unicode, so: * Allocate some storage to hold the unicode version of szFileName. * Do the acsii to unicode conversion . * Call SetIOProc \*----------------------------------------------------------------*/ pUnicodeFileName = AllocUnicodeStr( szFileName ); if ( pUnicodeFileName == (LPWSTR)NULL ) { return MMIOERR_OUTOFMEMORY; } SetIOProc( pUnicodeFileName, &mmioinfo ); if ( (mmioinfo.dwFlags & MMIO_UNICODEPROC ) || (mmioinfo.pIOProc == mmioDOSIOProc ) // or the DOS file IO Proc || (mmioinfo.pIOProc == mmioMEMIOProc ) ) { // or a memory file IO Proc /*------------------------------------------------------------*\ * We have a unicode IO Proc, this means that we have to * convert szNewFileName to unicode too. \*------------------------------------------------------------*/ pUnicodeNewFileName = AllocUnicodeStr( szNewFileName ); if ( pUnicodeNewFileName == (LPWSTR)NULL ) { FreeUnicodeStr( pUnicodeFileName ); return MMIOERR_OUTOFMEMORY; } uiRc = (UINT)IOProc( &mmioinfo, MMIOM_RENAME, (LPARAM)pUnicodeFileName, (LPARAM)pUnicodeNewFileName ); FreeUnicodeStr( pUnicodeNewFileName ); } else { /*------------------------------------------------------------*\ * We have an ascii IO Proc so use the given file names * without any conversion. \*------------------------------------------------------------*/ uiRc = (UINT)IOProc( &mmioinfo, MMIOM_RENAME, (LPARAM)szFileName, (LPARAM)szNewFileName); } FreeUnicodeStr( pUnicodeFileName ); return uiRc; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api HMMIO | mmioOpen | This function opens a file for unbuffered or buffered I/O. The file can be a DOS file, a memory file, or an element of a custom storage system. @parm LPTSTR | szFilename | Specifies a pointer to a string containing the filename of the file to open. If no I/O procedure is specified to open the file, then the filename determines how the file is opened, as follows: -- If the filename does not contain "+", then it is assumed to be the name of a DOS file. -- If the filename is of the form "foo.ext+bar", then the extension "EXT " is assumed to identify an installed I/O procedure which is called to perform I/O on the file (see ). -- If the filename is NULL and no I/O procedure is given, then is assumed to be the DOS file handle of a currently open file. The filename should not be longer than 128 bytes, including the terminating NULL. When opening a memory file, set

to NULL. @parm LPMMIOINFO | lpmmioinfo | Specifies a pointer to an structure containing extra parameters used by . Unless you are opening a memory file, specifying the size of a buffer for buffered I/O, or specifying an uninstalled I/O procedure to open a file, this parameter should be NULL. If

is not NULL, all unused fields of the structure it references must be set to zero, including the reserved fields. @parm DWORD | dwOpenFlags | Specifies option flags for the open operation. The MMIO_READ, MMIO_WRITE, and MMIO_READWRITE flags are mutually exclusive--only one should be specified. The MMIO_COMPAT, MMIO_EXCLUSIVE, MMIO_DENYWRITE, MMIO_DENYREAD, and MMIO_DENYNONE flags are DOS file-sharing flags, and can only be used after the DOS command SHARE has been executed. @flag MMIO_READ | Opens the file for reading only. This is the default, if MMIO_WRITE and MMIO_READWRITE are not specified. @flag MMIO_WRITE | Opens the file for writing. You should not read from a file opened in this mode. @flag MMIO_READWRITE | Opens the file for both reading and writing. @flag MMIO_CREATE | Creates a new file. If the file already exists, it is truncated to zero length. For memory files, MMIO_CREATE indicates the end of the file is initially at the start of the buffer. @flag MMIO_DELETE | Deletes a file. If this flag is specified,

should not be NULL. The return value will be TRUE (cast to HMMIO) if the file was deleted successfully, FALSE otherwise. Do not call for a file that has been deleted. If this flag is specified, all other file opening flags are ignored. @flag MMIO_PARSE | Creates a fully qualified filename from the path specified in

. The fully qualified filename is placed back into

. The return value will be TRUE (cast to HMMIO) if the qualification was successful, FALSE otherwise. The file is not opened, and the function does not return a valid MMIO file handle, so do not attempt to close the file. If this flag is specified, all other file opening flags are ignored. @flag MMIO_EXIST | Determines whether the specified file exists and creates a fully qualified filename from the path specified in

. The fully qualified filename is placed back into

. The return value will be TRUE (cast to HMMIO) if the qualification was successful and the file exists, FALSE otherwise. The file is not opened, and the function does not return a valid MMIO file handle, so do not attempt to close the file. @flag MMIO_ALLOCBUF | Opens a file for buffered I/O. To allocate a buffer larger or smaller than the default buffer size (8K), set the field of the structure to the desired buffer size. If is zero, then the default buffer size is used. If you are providing your own I/O buffer, then the MMIO_ALLOCBUF flag should not be used. @flag MMIO_COMPAT | Opens the file with compatibility mode, allowing any process on a given machine to open the file any number of times. fails if the file has been opened with any of the other sharing modes. @flag MMIO_EXCLUSIVE | Opens the file with exclusive mode, denying other processes both read and write access to the file. fails if the file has been opened in any other mode for read or write access, even by the current process. @flag MMIO_DENYWRITE | Opens the file and denies other processes write access to the file. fails if the file has been opened in compatibility or for write access by any other process. @flag MMIO_DENYREAD | Opens the file and denies other processes read access to the file. fails if the file has been opened in compatibility mode or for read access by any other process. @flag MMIO_DENYNONE | Opens the file without denying other processes read or write access to the file. fails if the file has been opened in compatibility mode by any other process. @flag MMIO_GETTEMP | Creates a temporary filename, optionally using the parameters passed in

to determine the temporary name. For example, you can specify "C:F" to create a temporary file residing on drive C, starting with letter "F". The resulting filename is placed in the buffer pointed to by

. The return value will be TRUE (cast to HMMIO) if the temporary filename was created successfully, FALSE otherwise. The file is not opened, and the function does not return a valid MMIO file handle, so do not attempt to close the file. This flag overrides all other flags. @rdesc The return value is a handle to the opened file. This handle is not a DOS file handle--do not use it with any file I/O functions other than MMIO functions. If the file cannot be opened, the return value is NULL. If

is not NULL, then its field will contain extended error information returned by the I/O procedure. @comm If

references an structure, set up the fields as described below. All unused fields must be set to zero, including reserved fields. -- To request that a file be opened with an installed I/O procedure, set the field to the four-character code of the I/O procedure, and set the field to NULL. -- To request that a file be opened with an uninstalled I/O procedure, set the field to point to the I/O procedure, and set to NULL. -- To request that determine which I/O procedure to use to open the file based on the filename contained in

, set both and to NULL. This is the default behavior if no structure is specified. -- To open a memory file using an internally allocated and managed buffer, set the field to NULL, to FOURCC_MEM, to the initial size of the buffer, and to the incremental expansion size of the buffer. This memory file will automatically be expanded in increments of bytes when necessary. Specify the MMIO_CREATE flag for the

parameter to initially set the end of the file to be the beginning of the buffer. -- To open a memory file using a caller-supplied buffer, set the field to point to the memory buffer, to FOURCC_MEM, to the size of the buffer, and to the incremental expansion size of the buffer. The expansion size in should only be non-zero if is a pointer obtained by calling and , since will be called to expand the buffer. In particular, if points to a local or global array, a block of memory in the local heap, or a block of memory allocated by , must be zero. Specify the MMIO_CREATE flag for the

parameter to initially set the end of the file to be the beginning of the buffer; otherwise, the entire block of memory will be considered readable. -- To use a currently open DOS file handle with MMIO, set the field to FOURCC_DOS, to NULL, and to the DOS file handle. Note that offsets within the file will be relative to the beginning of the file, and will not depend on the DOS file position at the time is called; the initial MMIO offset will be the same as the DOS offset when is called. Later, to close the MMIO file handle without closing the DOS file handle, pass the MMIO_FHOPEN flag to . You must call to close a file opened with . Open files are not automatically closed when an application exits. @xref mmioClose */ /* these are the changes to mmioOpen() to support compound files... */ /* @doc CFDOC @api HMMIO | mmioOpen | ...The file can be a DOS file, a memory file, an element of a RIFF compound file... @parm LPTSTR | szFilename | ... -- If

is of the form "foo+bar", then opens the compound file element named "bar" that is stored inside the RIFF compound file named "foo". -- If

is of the form "foo.ext+bar", then the extension "ext" is assumed to identify the installed I/O procedure (see ). The extension "bnd", and any extensions that have not been installed, are assumed to refer to a RIFF compound file. @parm LPMMIOINFO | lpmmioinfo | ... @parm DWORD | dwOpenFlags | ... @rdesc ... @comm ... The following I/O procedure identifiers (type FOURCC) are predefined: ... FOURCC_BND:

is assumed to be the name of a RIFF compound file element, and

should contain the HMMCF of the compound file. Alternatively,

can include the name of the compound file (e.g. "foo.bnd+bar.dib" as described above), and

should be NULL, to automatically open the compound file. ... The easy way to open an element of a RIFF compound file: just include the name of the compound file in

preceded by a "+" as described above. For example, opening "c:\data\bar.bnd+blorg.dib" opens the compound file element named "blorg.dib" in the compound file "c:\data\bar.bnd".

can be null in this case -- set

as described above. You can use this same method to open an element of a custom storage system, if the file extension of the compound file ("bnd" in the above example) corresponds to an installed I/O procedure -- see for details. To open an element of a RIFF compound file that was opened using or : set

to be the name of the compound file element; set

to FOURCC_BND; set

to the HMMCF of the open compound file; set

and

as described above; set all other fields of

to zero. ... */ /*--------------------------------------------------------------------*/ HMMIO APIENTRY mmioOpenW( LPWSTR szFileName, LPMMIOINFO lpmmioinfo, DWORD dwOpenFlags ) { PMMIO pmmio; // MMIO status block LPSTR hpBuffer; UINT w; // an MMRESULT or a LRESULT from an IOPROC V_FLAGS(dwOpenFlags, MMIO_OPEN_VALID, mmioOpen, NULL); V_WPOINTER0(lpmmioinfo, sizeof(MMIOINFO), NULL); if (lpmmioinfo) { lpmmioinfo->wErrorRet = 0; V_CALLBACK0((FARPROC)lpmmioinfo->pIOProc, NULL); } /* allocate MMIO status information block */ if ( (pmmio = (PMMIO)(NewHandle(TYPE_MMIO, NULL, sizeof(MMIOINFO)))) == NULL) { if (lpmmioinfo) { lpmmioinfo->wErrorRet = MMIOERR_OUTOFMEMORY; } return NULL; } // Implicitly acquired by NewHandle() ReleaseHandleListResource(); /*----------------------------------------------------------------*\ * NewHandle does not zero the allocated storage so we had better do * it now. \*----------------------------------------------------------------*/ ZeroMemory( pmmio, sizeof(MMIOINFO) ); /* if user supplied , copy it to */ if (lpmmioinfo != NULL) { *pmmio = *lpmmioinfo; } /* always takes precedence over contents of */ pmmio->dwFlags = dwOpenFlags; pmmio->hmmio = ((HMMIO)pmmio); /* MMIO_ALLOCBUF in the flags means that the user wants a buffer * allocated for buffered I/O, but after this point it means that * a buffer *was* allocated, so turn off the flag until the buffer * is actually allocated (which is done by mmioSetBuffer() below) */ if (pmmio->dwFlags & MMIO_ALLOCBUF) { /* if a buffer size is not specified, use the default */ if (pmmio->cchBuffer == 0) { pmmio->cchBuffer = MMIO_DEFAULTBUFFER; } pmmio->dwFlags &= ~MMIO_ALLOCBUF; } /* Set the pIOProc function as determined by the file name or the * parameters in the pmmio structure. */ SetIOProc(szFileName, pmmio); /* The pmmio structure hasn't been set up for buffering, so we must * explicitly make sure that pchBuffer is NULL. */ hpBuffer = pmmio->pchBuffer; pmmio->pchBuffer = NULL; /* set up buffered I/O however the user requested it */ w = mmioSetBuffer(((HMMIO)pmmio), hpBuffer, pmmio->cchBuffer, 0); if (w) { if (lpmmioinfo) { lpmmioinfo->wErrorRet = w; } FreeHandle(((HMMIO)pmmio)); return NULL; } if ( (pmmio->dwFlags & MMIO_UNICODEPROC) // a Unicode IO Proc || (pmmio->pIOProc == mmioDOSIOProc ) // or the DOS file IO Proc || (pmmio->pIOProc == mmioMEMIOProc ) ) { // or a memory file IO Proc /* let the I/O procedure open/delete/qualify the file */ w = (UINT)IOProc( pmmio, MMIOM_OPEN, (LPARAM)szFileName, 0L ); } else { if (NULL == szFileName) { w = (UINT)IOProc( pmmio, MMIOM_OPEN, (LPARAM)NULL, 0L ); } else { LPSTR lpAsciiFileName; // ascii version of szFileName /*------------------------------------------------------------*\ * We have an ascii IO Proc so convert the given file name * into ascii. \*------------------------------------------------------------*/ lpAsciiFileName = AllocAsciiStr( szFileName ); if ( lpAsciiFileName == (LPSTR)NULL ) { if (lpmmioinfo) { lpmmioinfo->wErrorRet = MMIOERR_OUTOFMEMORY; } FreeHandle( (HMMIO)pmmio ); return NULL; } /*------------------------------------------------------------*\ * Call the IO proc and then free the allocated unicode * filename storage. \*------------------------------------------------------------*/ w = (UINT)IOProc( pmmio, MMIOM_OPEN, (LPARAM)lpAsciiFileName, 0L ); FreeAsciiStr( lpAsciiFileName ); } } /* If this is non-zero, return it to the user */ if (w != 0) { if (lpmmioinfo != NULL) { lpmmioinfo->wErrorRet = w; } FreeHandle(((HMMIO)pmmio)); return NULL; } if (pmmio->dwFlags & (MMIO_DELETE| MMIO_PARSE| MMIO_EXIST| MMIO_GETTEMP)) { /* if the file is being deleted/parsed/name gotten, exit * QUICKLY because the file handle (or whatever) in * is not valid. */ mmioSetBuffer(((HMMIO)pmmio), NULL, 0L, 0); FreeHandle(((HMMIO)pmmio)); return (HMMIO) TRUE; } /* the initial "current buffered offset" will be equal to the initial * "current disk offset" */ pmmio->lBufOffset = pmmio->lDiskOffset; return ((HMMIO)pmmio); } HMMIO APIENTRY mmioOpenA( LPSTR szFileName, LPMMIOINFO lpmmioinfo, DWORD dwOpenFlags ) { PMMIO pmmio; // MMIO status block LPSTR hpBuffer; UINT w; // an MMRESULT or a LRESULT from an IOPROC LPWSTR lpUnicodeName; // Unicode version of szFileName WCHAR UnicodeBuffer[ MAX_PATH ]; V_FLAGS(dwOpenFlags, MMIO_OPEN_VALID, mmioOpen, NULL); V_WPOINTER0(lpmmioinfo, sizeof(MMIOINFO), NULL); if (lpmmioinfo) { lpmmioinfo->wErrorRet = 0; V_CALLBACK0((FARPROC)lpmmioinfo->pIOProc, NULL); } /*----------------------------------------------------------------*\ * Don't convert szFilename if it does not point to anything \*----------------------------------------------------------------*/ if ( szFileName != (LPSTR)NULL ) { /*----------------------------------------------------------------*\ * Convert the Ascii szFileName to Unicode \*----------------------------------------------------------------*/ AsciiStrToUnicodeStr( (PBYTE)UnicodeBuffer, (PBYTE)UnicodeBuffer + (MAX_PATH * sizeof(WCHAR)), szFileName ); lpUnicodeName = UnicodeBuffer; } else { lpUnicodeName = (LPWSTR)NULL; } /* allocate MMIO status information block */ if ( (pmmio = (PMMIO)(NewHandle(TYPE_MMIO, NULL, sizeof(MMIOINFO)))) == NULL) { if (lpmmioinfo) { lpmmioinfo->wErrorRet = MMIOERR_OUTOFMEMORY; } return NULL; } // Implicitly acquired by NewHandle() ReleaseHandleListResource(); /*----------------------------------------------------------------*\ * NewHandle does not zero the allocated storage so we had better do * it now. \*----------------------------------------------------------------*/ ZeroMemory( pmmio, sizeof(MMIOINFO) ); /* if user supplied , copy it to */ if (lpmmioinfo != NULL) { *pmmio = *lpmmioinfo; } /* always takes precedence over contents of */ pmmio->dwFlags = dwOpenFlags; pmmio->hmmio = ((HMMIO)pmmio); /* MMIO_ALLOCBUF in the flags means that the user wants a buffer * allocated for buffered I/O, but after this point it means that * a buffer *was* allocated, so turn off the flag until the buffer * is actually allocated (which is done by mmioSetBuffer() below) */ if (pmmio->dwFlags & MMIO_ALLOCBUF) { /* if a buffer size is not specified, use the default */ if (pmmio->cchBuffer == 0) { pmmio->cchBuffer = MMIO_DEFAULTBUFFER; } pmmio->dwFlags &= ~MMIO_ALLOCBUF; } /* Set the pIOProc function as determined by the file name or the * parameters in the pmmio structure. */ SetIOProc( lpUnicodeName, pmmio ); /* The pmmio structure hasn't been set up for buffering, so we must * explicitly make sure that pchBuffer is NULL. */ hpBuffer = pmmio->pchBuffer; pmmio->pchBuffer = NULL; /* set up buffered I/O however the user requested it */ w = mmioSetBuffer(((HMMIO)pmmio), hpBuffer, pmmio->cchBuffer, 0); if (w) { if (lpmmioinfo) { lpmmioinfo->wErrorRet = w; } FreeHandle(((HMMIO)pmmio)); return NULL; } if ( (pmmio->dwFlags & MMIO_UNICODEPROC) // a Unicode IO Proc || (pmmio->pIOProc == mmioDOSIOProc) // or the DOS file IO Proc || (pmmio->pIOProc == mmioMEMIOProc) ) { // or a memory file IO Proc /* let the I/O procedure open/delete/qualify the file */ w = (UINT)IOProc( pmmio, MMIOM_OPEN, (LPARAM)lpUnicodeName, 0L ); /*------------------------------------------------------------*\ * If we have a DOS IO proc and the user specified the * parse option and we did not get any errors from the IO proc * call we convert the returned parsed path string from Unicode * back into Ansi and copy this value into szFileName. \*------------------------------------------------------------*/ if ( w == 0 && (pmmio->pIOProc == mmioDOSIOProc) && ((dwOpenFlags & MMIO_PARSE) || (dwOpenFlags & MMIO_GETTEMP)) ) { BYTE ansiPath[ MAX_PATH ]; UnicodeStrToAsciiStr( ansiPath, ansiPath + MAX_PATH, lpUnicodeName ); strcpy( (LPSTR)szFileName, (LPCSTR)ansiPath ); } } else { w = (UINT)IOProc( pmmio, MMIOM_OPEN, (LPARAM)szFileName, 0L ); } /* If this is non-zero, return it to the user */ if (w != 0) { if (lpmmioinfo != NULL) { lpmmioinfo->wErrorRet = w; } FreeHandle(((HMMIO)pmmio)); return NULL; } if (pmmio->dwFlags & (MMIO_DELETE| MMIO_PARSE| MMIO_EXIST| MMIO_GETTEMP)) { /* if the file is being deleted/parsed/name gotten, exit * QUICKLY because the file handle (or whatever) in * is not valid. */ mmioSetBuffer(((HMMIO)pmmio), NULL, 0L, 0); FreeHandle(((HMMIO)pmmio)); return (HMMIO) TRUE; } /* the initial "current buffered offset" will be equal to the initial * "current disk offset" */ pmmio->lBufOffset = pmmio->lDiskOffset; return ((HMMIO)pmmio); } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api MMRESULT | mmioClose | This function closes a file opened with . @parm HMMIO | hmmio | Specifies the file handle of the file to close. @parm UINT | uFlags | Specifies options for the close operation. @flag MMIO_FHOPEN | If the file was opened by passing the DOS file handle of an already-opened file to , then using this flag tells to close the MMIO file handle, but not the DOS file handle. (This is done by the I/O Proc). @rdesc The return value is zero if the function is successful. Otherwise, the return value is an error code, either from or from the I/O procedure. The error code can be one of the following codes: @flag MMIOERR_CANNOTWRITE | The contents of the buffer could not be written to disk. @flag MMIOERR_CANNOTCLOSE | There was a DOS file system error when the I/O Proc attempted to close the DOS file. @xref mmioOpen mmioFlush */ /*--------------------------------------------------------------------*/ MMRESULT APIENTRY mmioClose(HMMIO hmmio, UINT uFlags) { UINT w; /* either an LRESULT from an IOProc or an MMRESULT */ V_HANDLE(hmmio, TYPE_MMIO, MMSYSERR_INVALHANDLE); if ((w = mmioFlush(hmmio, 0)) != 0) return w; w = (UINT)IOProc( (PMMIO)hmmio, MMIOM_CLOSE, (LPARAM)(DWORD) uFlags, (LPARAM) 0); if (w != 0) return w; /* free the buffer if necessary */ mmioSetBuffer(hmmio, NULL, 0L, 0); FreeHandle(hmmio); return 0; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api LRESULT | mmioRead | This function reads a specified number of bytes from a file opened with . @parm HMMIO | hmmio | Specifies the file handle of the file to be read. @parm LPSTR | pch | Specifies a pointer to a buffer to contain the data read from the file. @parm LONG | cch | Specifies the number of bytes to read from the file. @rdesc The return value is the number of bytes actually read. If the end of the file has been reached and no more bytes can be read, the return value is zero. If there is an error reading from the file, the return value is -1. @comm On 16 bit windows pch is a huge pointer. On 32 bit windows there is no distinction between huge pointers and long pointers. @xref mmioWrite */ /*--------------------------------------------------------------------*/ LONG APIENTRY mmioRead(HMMIO hmmio, LPSTR pch, LONG cch) { LONG lTotalBytesRead = 0L; // total no. bytes read LONG lBytes; // no. bytes that can be read PMMIO pmmio=(PMMIO)hmmio; //local copy hmmio - avoid casting, simplify debug V_HANDLE(hmmio, TYPE_MMIO, -1); V_WPOINTER(pch, cch, -1); for(;;) { /* calculate the number of bytes that can be read */ lBytes = (LONG)(pmmio->pchEndRead - pmmio->pchNext); /* can only read at most bytes from buffer */ if (lBytes > cch) lBytes = cch; if (lBytes > 0) { /* this is where some performance improvements can * be made, especially for small reads...? */ CopyMemory(pch, pmmio->pchNext, lBytes); pmmio->pchNext += lBytes; pch += lBytes; cch -= lBytes; lTotalBytesRead += lBytes; } /* cannot do MMIOM_READ from memory files */ if (pmmio->fccIOProc == FOURCC_MEM) return lTotalBytesRead; if (cch == 0) // no more to read? return lTotalBytesRead; /* we need to read beyond this buffer; if we have at least * another bufferful to read, just call the I/O procedure */ if (cch > pmmio->cchBuffer) break; /* read the next bufferful and loop around */ if (mmioAdvance(hmmio, NULL, MMIO_READ) != 0) return -1; /* if mmioAdvance() couldn't read any more data, we must be * at the end of the file */ if (pmmio->pchNext == pmmio->pchEndRead) return lTotalBytesRead; } /* flush and empty the I/O buffer and manipulate * directly to change the current file position */ if (mmioFlush(hmmio, MMIO_EMPTYBUF) != 0) return -1; /* call the I/O procedure to do the rest of the reading */ lBytes = mmioDiskIO(pmmio, MMIOM_READ, pch, cch); pmmio->lBufOffset = pmmio->lDiskOffset; return (lBytes == -1L) ? -1L : lTotalBytesRead + lBytes; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api LRESULT | mmioWrite | This function writes a specified number of bytes to a file opened with . @parm HMMIO | hmmio | Specifies the file handle of the file. @parm LPSTR | pch | Specifies a pointer to the buffer to be written to the file. @parm LONG | cch | Specifies the number of bytes to write to the file. @rdesc The return value is the number of bytes actually written. If there is an error writing to the file, the return value is -1. @comm The current file position is incremented by the number of bytes written. On 16 bit windows pch is a huge pointer. On 32 bit windows there is no distinction between huge pointers and long pointers. @xref mmioRead */ /*--------------------------------------------------------------------*/ LONG APIENTRY mmioWrite(HMMIO hmmio, LPCSTR pch, LONG cch) { LONG lTotalBytesWritten = 0L; // total no. bytes written LONG lBytes; // no. bytes that can be written // "pch" is LPCSTR which is correct, but // we pass it to a polymorphic routine // which needs LPSTR. V_HANDLE(hmmio, TYPE_MMIO, -1); V_RPOINTER(pch, cch, -1); for(;;) { /* calculate the number of bytes that can be written */ lBytes = (LONG)(((PMMIO)hmmio)->pchEndWrite - ((PMMIO)hmmio)->pchNext); if ((cch > lBytes) && (((PMMIO)hmmio)->fccIOProc == FOURCC_MEM)) { /* this is a memory file -- expand it */ if (mmioExpandMemFile(((PMMIO)hmmio), cch - lBytes) != 0) return -1; // cannot expand lBytes = (LONG)(((PMMIO)hmmio)->pchEndWrite - ((PMMIO)hmmio)->pchNext); } /* can only write at most bytes into the buffer */ if (lBytes > cch) lBytes = cch; /* this is where some performance improvements can * be made, especially for small writes... should * special-case cases when segment boundaries are * not crossed (or maybe hmemcpy() should do that) */ if (lBytes > 0) { CopyMemory(((PMMIO)hmmio)->pchNext, pch, lBytes); ((PMMIO)hmmio)->dwFlags |= MMIO_DIRTY; ((PMMIO)hmmio)->pchNext += lBytes; pch += lBytes; cch -= lBytes; lTotalBytesWritten += lBytes; } /* validate , i.e. re-enforce the invariant that * points past the last valid byte in the buffer */ if (((PMMIO)hmmio)->pchEndRead < ((PMMIO)hmmio)->pchNext) ((PMMIO)hmmio)->pchEndRead = ((PMMIO)hmmio)->pchNext; if (cch == 0) // no more to write? return lTotalBytesWritten; /* we need to read beyond this buffer; if we have at least * another bufferful to read, just call the I/O procedure */ if (cch > ((PMMIO)hmmio)->cchBuffer) break; /* write this buffer (if needed) and read the next * bufferful (if needed) */ if (mmioAdvance(hmmio, NULL, MMIO_WRITE) != 0) return -1; } /* we should never need to do MMIOM_WRITE with memory files */ /* flush and empty the I/O buffer and manipulate * directly to change the current file position */ if (mmioFlush(hmmio, MMIO_EMPTYBUF) != 0) return -1; /* call the I/O procedure to do the rest of the writing * mmioDiskIO is a polymorphic routine, hence we need to cast * our LPCSTR input pointer to LPSTR. */ lBytes = mmioDiskIO(((PMMIO)hmmio), MMIOM_WRITE, (LPSTR)pch, cch); ((PMMIO)hmmio)->lBufOffset = ((PMMIO)hmmio)->lDiskOffset; return (lBytes == -1L) ? -1L : lTotalBytesWritten + lBytes; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api LRESULT | mmioSeek | This function changes the current file position in a file opened with . The current file position is the location in the file where data is read or written. @parm HMMIO | hmmio | Specifies the file handle of the file to seek in. @parm LONG | lOffset | Specifies an offset to change the file position. @parm int | iOrigin | Specifies how the offset specified by

is interpreted. Contains one of the following flags: @flag SEEK_SET | Seeks to

bytes from the beginning of the file. @flag SEEK_CUR | Seeks to

bytes from the current file position. @flag SEEK_END | Seeks to

bytes from the end of the file. @rdesc The return value is the new file position in bytes, relative to the beginning of the file. If there is an error, the return value is -1. @comm Seeking to an invalid location in the file, such as past the end of the file, may cause to not return an error, but may cause subsequent I/O operations on the file to fail. To locate the end of a file, call with

set to zero and

set to SEEK_END. */ /*--------------------------------------------------------------------*/ LONG APIENTRY mmioSeek(HMMIO hmmio, LONG lOffset, int iOrigin) { LONG lCurOffset; // disk offset of LONG lEndBufOffset; // disk offset of end of buffer LONG lNewOffset; // new disk offset V_HANDLE(hmmio, TYPE_MMIO, -1); /* careful! all this buffer pointer manipulation is fine, but keep * in mind that buffering may be disabled (in which case * and will both be NULL, so the buffer will appear to * be zero bytes in size) */ /* <((PMMIO)hmmio)->lBufOffset> is the disk offset of the start of the * start of the buffer; determine , the offset of , * and , the offset of the end of the valid part * of the buffer */ lCurOffset = (LONG)(((PMMIO)hmmio)->lBufOffset + (((PMMIO)hmmio)->pchNext - ((PMMIO)hmmio)->pchBuffer)); lEndBufOffset = (LONG)(((PMMIO)hmmio)->lBufOffset + (((PMMIO)hmmio)->pchEndRead - ((PMMIO)hmmio)->pchBuffer)); /* determine , the offset to seek to */ switch (iOrigin) { case SEEK_SET: // seek relative to start of file lNewOffset = lOffset; break; case SEEK_CUR: // seek relative to current location lNewOffset = lCurOffset + lOffset; break; case SEEK_END: // seek relative to end of file if (((PMMIO)hmmio)->fccIOProc == FOURCC_MEM) lNewOffset = lEndBufOffset - lOffset; else { LONG lEndFileOffset; /* find out where the end of the file is */ lEndFileOffset = (LONG)IOProc( (PMMIO)hmmio, MMIOM_SEEK, (LPARAM) 0, (LPARAM) SEEK_END); if (lEndFileOffset == -1) return -1; /* Check that we don't have buffered data not yet written */ if (lEndBufOffset > lEndFileOffset) { lEndFileOffset = lEndBufOffset; } lNewOffset = lEndFileOffset - lOffset; } break; default: lNewOffset = 0; { dprintf(( "Invalid seek type %d\n",iOrigin)); WinAssert(FALSE); } } if ( (lNewOffset >= ((PMMIO)hmmio)->lBufOffset) && (lNewOffset <= lEndBufOffset) ) { /* seeking within the valid part of the buffer * (possibly including seeking to ) */ ((PMMIO)hmmio)->pchNext = ((PMMIO)hmmio)->pchBuffer + (lNewOffset - ((PMMIO)hmmio)->lBufOffset); } else { /* seeking outside the buffer */ if (((PMMIO)hmmio)->fccIOProc == FOURCC_MEM) return -1; // can't seek outside mem. file buffer if (mmioFlush(hmmio, 0) != 0) return -1; /* the current "buffered file position" (same as * for unbuffered files) equals + * ( - ); we'll move the current buffered * file position (and empty the buffer, since it becomes * invalid when changes) as follows... */ ((PMMIO)hmmio)->lBufOffset = lNewOffset; ((PMMIO)hmmio)->pchNext = ((PMMIO)hmmio)->pchEndRead = ((PMMIO)hmmio)->pchBuffer; /* don't need to actually seek right now, since the next * MMIOM_READ or MMIOM_WRITE will have to seek anyway */ } return lNewOffset; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api MMRESULT | mmioGetInfo | This function retrieves information about a file opened with . This information allows the caller to directly access the I/O buffer, if the file is opened for buffered I/O. @parm HMMIO | hmmio | Specifies the file handle of the file. @parm LPMMIOINFO | lpmmioinfo | Specifies a pointer to a caller-allocated structure that fills with information about the file. See the structure and the function for information about the fields in this structure. @parm UINT | uFlags | Is not used and should be set to zero. @rdesc The return value is zero if the function is successful. @comm To directly access the I/O buffer of a file opened for buffered I/O, use the following fields of the structure filled by : -- The field points to the next byte in the buffer that can be read or written. When you read or write, increment by the number of bytes read or written. -- The field points to one byte past the last valid byte in the buffer that can be read. -- The field points to one byte past the last location in the buffer that can be written. Once you read or write to the buffer and modify , do not call any MMIO function except until you call . Call when you are finished directly accessing the buffer. When you reach the end of the buffer specified by or , call to fill the buffer from the disk, or write the buffer to the disk. The function will update the , , and fields in the structure for the file. Before calling or to flush a buffer to disk, set the MMIO_DIRTY flag in the field of the structure for the file. Otherwise, the buffer will not get written to disk. Do not decrement or modify any fields in the structure other than and . Do not set any flags in except MMIO_DIRTY. @xref mmioSetInfo MMIOINFO */ /*--------------------------------------------------------------------*/ MMRESULT APIENTRY mmioGetInfo(HMMIO hmmio, LPMMIOINFO lpmmioinfo, UINT uFlags) { V_HANDLE(hmmio, TYPE_MMIO, MMSYSERR_INVALHANDLE); V_WPOINTER(lpmmioinfo, sizeof(MMIOINFO), MMSYSERR_INVALPARAM); *lpmmioinfo = *((PMMIO)hmmio); return 0; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api MMRESULT | mmioSetInfo | This function updates the information retrieved by about a file opened with . Use this function to terminate direct buffer access of a file opened for buffered I/O. @parm HMMIO | hmmio | Specifies the file handle of the file. @parm LPMMIOINFO | lpmmioinfo | Specifies a pointer to an structure filled with information with . @parm UINT | uFlags | Is not used and should be set to zero. @rdesc The return value is zero if the function is successful. @comm If you have written to the file I/O buffer, set the MMIO_DIRTY flag in the field of the structure before calling to terminate direct buffer access. Otherwise, the buffer will not get flushed to disk. @xref mmioGetInfo MMIOINFO */ /*--------------------------------------------------------------------*/ MMRESULT APIENTRY mmioSetInfo(HMMIO hmmio, LPCMMIOINFO lpmmioinfo, UINT fuInfo) { V_HANDLE(hmmio, TYPE_MMIO, MMSYSERR_INVALHANDLE); V_RPOINTER(lpmmioinfo, sizeof(MMIOINFO), MMSYSERR_INVALPARAM); V_RPOINTER0( lpmmioinfo->pchBuffer , lpmmioinfo->cchBuffer , MMSYSERR_INVALPARAM ); V_CALLBACK((FARPROC)lpmmioinfo->pIOProc, MMSYSERR_INVALPARAM); /* copy the relevant information from back into */ *((PMMIO)hmmio) = *lpmmioinfo; /* validate , i.e. re-enforce the invariant that * points past the last valid byte in the buffer */ if (((PMMIO)hmmio)->pchEndRead < ((PMMIO)hmmio)->pchNext) ((PMMIO)hmmio)->pchEndRead = ((PMMIO)hmmio)->pchNext; return 0; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api MMRESULT | mmioSetBuffer | This function enables or disables buffered I/O, or changes the buffer or buffer size for a file opened with . @parm HMMIO | hmmio | Specifies the file handle of the file. @parm LPSTR | pchBuffer | Specifies a pointer to a caller-supplied buffer to use for buffered I/O. If NULL, allocates an internal buffer for buffered I/O. @parm LONG | cchBuffer | Specifies the size of the caller-supplied buffer, or the size of the buffer for to allocate. @parm UINT | fuInfo | Is not used and should be set to zero. @rdesc The return value is zero if the function is successful. Otherwise, the return value specifies an error code. If an error occurs, the file handle remains valid. The error code can be one of the following codes: @flag MMIOERR_CANNOTWRITE | The contents of the old buffer could not be written to disk, so the operation was aborted. @flag MMIOERR_OUTOFMEMORY | The new buffer could not be allocated, probably due to a lack of available memory. @comm To enable buffering using an internal buffer, set

to NULL and

to the desired buffer size. To supply your own buffer, set

to point to the buffer, and set

to the size of the buffer. To disable buffered I/O, set

to NULL and

to zero. If buffered I/O is already enabled using an internal buffer, you can reallocate the buffer to a different size by setting

to NULL and

to the new buffer size. The contents of the buffer may be changed after resizing. */ /*--------------------------------------------------------------------*/ MMRESULT APIENTRY mmioSetBuffer( HMMIO hmmio , LPSTR pchBuffer , LONG cchBuffer , UINT uFlags ) { MMRESULT mmr; HANDLE hMem; V_HANDLE(hmmio, TYPE_MMIO, MMSYSERR_INVALHANDLE); // Validate the buffer - for READ/WRITE as appropriate if (((PMMIO)hmmio)->dwFlags & MMIO_WRITE) { V_WPOINTER0(pchBuffer, cchBuffer, MMSYSERR_INVALPARAM); } else { V_RPOINTER0(pchBuffer, cchBuffer, MMSYSERR_INVALPARAM); } if ((((PMMIO)hmmio)->dwFlags & MMIO_ALLOCBUF) && (pchBuffer == NULL) && (cchBuffer > 0)) { /* grow or shrink buffer in-place */ LPSTR pch; LONG lDeltaNext; LONG lDeltaEndRead; /* Since the ALLOCBUF flag is set, we must have a buffer */ /* write the buffer to disk, but don't empty it */ if ((mmr = mmioFlush(hmmio, 0)) != 0) return mmr; for(;;) { /* remember where and are * in the buffer */ lDeltaNext = (LONG)(((PMMIO)hmmio)->pchNext - ((PMMIO)hmmio)->pchBuffer); lDeltaEndRead = (LONG)(((PMMIO)hmmio)->pchEndRead - ((PMMIO)hmmio)->pchBuffer); if (cchBuffer >= lDeltaNext) break; /* caller wants to truncate the part of the buffer * that contains -- handle this by * emptying the buffer, recalculating * and , and continuing below */ if ((mmr = mmioFlush(hmmio, MMIO_EMPTYBUF)) != 0) return mmr; } /* reallocate buffer */ { HANDLE hTemp; hTemp = GlobalHandle( ((PMMIO)hmmio)->pchBuffer ); GlobalUnlock( hTemp ); hMem = GlobalReAlloc( hTemp , cchBuffer , GMEM_MOVEABLE ); pch = GlobalLock(hMem); dprintf2(("mmioSetBuffer reallocated ptr %8x, handle %8x, to ptr %8x (handle %8x)\n", ((PMMIO)hmmio)->pchBuffer, hTemp, pch, hMem)); } /* If we cannot allocate the new buffer, exit with no * harm done. */ if (pch == NULL) return MMIOERR_OUTOFMEMORY; // out of memory /* transfer pointers to new buffer */ ((PMMIO)hmmio)->cchBuffer = cchBuffer; ((PMMIO)hmmio)->pchBuffer = pch; ((PMMIO)hmmio)->pchNext = pch + lDeltaNext; ((PMMIO)hmmio)->pchEndRead = pch + lDeltaEndRead; /* always points to the end of the buf. */ ((PMMIO)hmmio)->pchEndWrite = ((PMMIO)hmmio)->pchBuffer + cchBuffer; /* check if the reallocation truncated valid data */ if (lDeltaEndRead > cchBuffer) ((PMMIO)hmmio)->pchEndRead = ((PMMIO)hmmio)->pchEndWrite; return 0; } /* write the buffer to disk and stop using the buffer */ if ((mmr = mmioFlush(hmmio, MMIO_EMPTYBUF)) != 0) return mmr; if (((PMMIO)hmmio)->dwFlags & MMIO_ALLOCBUF) { hMem = GlobalHandle( ((PMMIO)hmmio)->pchBuffer); GlobalUnlock( hMem ); GlobalFree( hMem ); ((PMMIO)hmmio)->dwFlags &= ~MMIO_ALLOCBUF; } /* Initially, no error. */ mmr = 0; if ((pchBuffer == NULL) && (cchBuffer > 0)) { hMem = GlobalAlloc(GMEM_MOVEABLE, cchBuffer); if (hMem) pchBuffer = GlobalLock(hMem); //else pchBuffer = NULL; /* If there is an error, change the file to be un-buffered * and return an error code. The file is still valid. * (Just for a little extra security.) */ if (pchBuffer == NULL) { mmr = MMIOERR_OUTOFMEMORY; cchBuffer = 0L; } else ((PMMIO)hmmio)->dwFlags |= MMIO_ALLOCBUF; } /* invariant: points past the end of the "valid" portion * of the buffer, and points past the last byte that * can be written into; points to the next byte to read * or write; is the current disk offset of the start * of the buffer, and it will not change */ ((PMMIO)hmmio)->pchBuffer = pchBuffer; ((PMMIO)hmmio)->cchBuffer = cchBuffer; ((PMMIO)hmmio)->pchNext = ((PMMIO)hmmio)->pchEndRead = ((PMMIO)hmmio)->pchBuffer; ((PMMIO)hmmio)->pchEndWrite = ((PMMIO)hmmio)->pchBuffer + cchBuffer; return mmr; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api MMRESULT | mmioFlush | This function writes the I/O buffer of a file to disk, if the I/O buffer has been written to. @parm HMMIO | hmmio | Specifies the file handle of a file opened with . @parm UINT | uFlags | Is not used and should be set to zero. @rdesc The return value is zero if the function is successful. Otherwise, the return value specifies an error code. The error code can be one of the following codes: @flag MMIOERR_CANNOTWRITE | The contents of the buffer could not be written to disk. @comm Closing a file with will automatically flush its buffer. If there is insufficient disk space to write the buffer, will fail, even if the preceding calls were successful. */ /*--------------------------------------------------------------------*/ MMRESULT APIENTRY mmioFlush(HMMIO hmmio, UINT uFlags) { LONG lBytesAsk; // no. bytes to write LONG lBytesWritten; // no. bytes actually written V_HANDLE(hmmio, TYPE_MMIO, MMSYSERR_INVALHANDLE); if ( ( ((PMMIO)hmmio)->fccIOProc == FOURCC_MEM ) || ( ((PMMIO)hmmio)->pchBuffer == NULL ) ) return 0; // cannot flush memory files /* if the file is unbuffered then the dirty flag should not be set */ if (((PMMIO)hmmio)->dwFlags & MMIO_DIRTY) { /* figure out how many bytes need to be flushed */ lBytesAsk = (LONG)(((PMMIO)hmmio)->pchEndRead - ((PMMIO)hmmio)->pchBuffer); /* write the buffer to disk */ lBytesWritten = mmioDiskIO(((PMMIO)hmmio), MMIOM_WRITEFLUSH, ((PMMIO)hmmio)->pchBuffer, lBytesAsk); if (lBytesWritten != lBytesAsk) return MMIOERR_CANNOTWRITE; ((PMMIO)hmmio)->dwFlags &= ~MMIO_DIRTY; // buffer is clean now } if (uFlags & MMIO_EMPTYBUF) { /* empty the I/O buffer, and update to reflect * what the current file position is */ ((PMMIO)hmmio)->lBufOffset += (LONG)((((PMMIO)hmmio)->pchNext - ((PMMIO)hmmio)->pchBuffer)); ((PMMIO)hmmio)->pchNext = ((PMMIO)hmmio)->pchEndRead = ((PMMIO)hmmio)->pchBuffer; } return 0; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api MMRESULT | mmioAdvance | This function advances the I/O buffer of a file set up for direct I/O buffer access with . If the file is opened for reading, the I/O buffer is filled from the disk. If the file is opened for writing and the MMIO_DIRTY flag is set in the field of the structure, the buffer is written to disk. The , , and fields of the structure are updated to reflect the new state of the I/O buffer. @parm HMMIO | hmmio | Specifies the file handle for a file opened with . @parm LPMMIOINFO | lpmmioinfo | Optionally specifies a pointer to the structure obtained with , which is used to set the current file information, then updated after the buffer is advanced. @parm UINT | uFlags | Specifies options for the operation. Contains exactly one of the following two flags: @flag MMIO_READ | The buffer is filled from the file. @flag MMIO_WRITE | The buffer is written to the file. @rdesc The return value is zero if the operation is successful. Otherwise, the return value specifies an error code. The error code can be one of the following codes: @flag MMIOERR_CANNOTWRITE | The contents of the buffer could not be written to disk. @flag MMIOERR_CANNOTREAD | An error occurred while re-filling the buffer. @flag MMIOERR_UNBUFFERED | The specified file is not opened for buffered I/O. @flag MMIOERR_CANNOTEXPAND | The specified memory file cannot be expanded, probably because the field was set to zero in the initial call to . @flag MMIOERR_OUTOFMEMORY | There was not enough memory to expand a memory file for further writing. @comm If the specified file is opened for writing or for both reading and writing, the I/O buffer will be flushed to disk before the next buffer is read. If the I/O buffer cannot be written to disk because the disk is full, then will return MMIOERR_CANNOTWRITE. If the specified file is only open for writing, the MMIO_WRITE flag must be specified. If you have written to the I/O buffer, you must set the MMIO_DIRTY flag in the field of the structure before calling . Otherwise, the buffer will not be written to disk. If the end of file is reached, will still return success, even though no more data can be read. Thus, to check for the end of the file, it is necessary to see if the and fields of the structure are equal after calling . @xref mmioGetInfo MMIOINFO */ /*--------------------------------------------------------------------*/ MMRESULT APIENTRY mmioAdvance(HMMIO hmmio, LPMMIOINFO lpmmioinfo, UINT uFlags) { LONG lBytesRead; // bytes actually read UINT w; V_HANDLE(hmmio, TYPE_MMIO, MMSYSERR_INVALHANDLE); if (((PMMIO)hmmio)->pchBuffer == NULL) return MMIOERR_UNBUFFERED; if (lpmmioinfo != NULL) { V_WPOINTER(lpmmioinfo, sizeof(MMIOINFO), MMSYSERR_INVALPARAM); mmioSetInfo(hmmio, lpmmioinfo, 0); } if (((PMMIO)hmmio)->fccIOProc == FOURCC_MEM) { /* this is a memory file: * -- if the caller is reading, cannot advance * -- if the caller is writing, then advance by expanding * the buffer (if possible) if the there is less than * bytes left in the buffer */ if (!(uFlags & MMIO_WRITE)) return MMIOERR_CANNOTREAD; if ( (DWORD)(((PMMIO)hmmio)->pchEndWrite - ((PMMIO)hmmio)->pchNext) >= ((PMMIO)hmmio)->adwInfo[0] ) return MMIOERR_CANNOTEXPAND; if ((w = mmioExpandMemFile(((PMMIO)hmmio), 1L)) != 0) return w; // out of memory, or whatever goto GETINFO_AND_EXIT; } /* empty the I/O buffer, which will effectively advance the * buffer by ( - ) bytes */ if ((w = mmioFlush(hmmio, MMIO_EMPTYBUF)) != 0) return w; /* if MMIO_WRITE bit is not set in uFlags, fill the buffer */ if (!(uFlags & MMIO_WRITE)) { /* read the next bufferful from the file */ lBytesRead = mmioDiskIO(((PMMIO)hmmio), MMIOM_READ, ((PMMIO)hmmio)->pchBuffer, ((PMMIO)hmmio)->cchBuffer); if (lBytesRead == -1) return MMIOERR_CANNOTREAD; /* reading zero bytes should not be treated as an error * condition -- e.g. open a new file R+W and call * mmioAdvance(), and MMIOM_READ will return zero bytes * because the file started off empty */ ((PMMIO)hmmio)->pchEndRead += lBytesRead; } GETINFO_AND_EXIT: /* copy back to if is provided */ if (lpmmioinfo != NULL) mmioGetInfo(hmmio, lpmmioinfo, 0); return 0; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api FOURCC | mmioStringToFOURCC | This function converts a null-terminated string to a four-character code. @parm LPCTSTR | sz | Specifies a pointer to a null-terminated string to a four-character code. @parm UINT | uFlags | Specifies options for the conversion: @flag MMIO_TOUPPER | Converts all characters to uppercase. @rdesc The return value is the four character code created from the given string. @comm This function does not check to see if the string referenced by

follows any conventions regarding which characters to include in a four-character code. The string is simply copied to a four-character code and padded with blanks or truncated to four characters if required. @xref mmioFOURCC */ /*--------------------------------------------------------------------*/ FOURCC APIENTRY mmioStringToFOURCCW( LPCWSTR sz, UINT uFlags ) { FOURCC fcc; PBYTE pByte; // ascii version of szFileName ULONG cbDst; // character count of szFileName // V_STRING(sz, -1, 0); /*------------------------------------------------------------*\ * Convert the given unicode string into ascii and then call * the ascii version of mmioStringToFOURCCW \*------------------------------------------------------------*/ cbDst = (wcslen( sz ) * sizeof(WCHAR)) + sizeof(WCHAR); pByte = HeapAlloc( hHeap, 0, cbDst ); if ( pByte == (PBYTE)NULL ) { return (FOURCC)(DWORD_PTR)NULL; } UnicodeStrToAsciiStr( pByte, pByte + cbDst, sz ); fcc = mmioStringToFOURCCA( (LPSTR)pByte, uFlags ); HeapFree( hHeap, 0, pByte ); return (FOURCC)fcc; } FOURCC APIENTRY mmioStringToFOURCCA( LPCSTR sz, UINT uFlags ) { FOURCC fcc; LPSTR pch = (LPSTR) &fcc; int i; V_STRING(sz, (DWORD)-1, 0); for (i = sizeof(FOURCC) - 1; i >= 0; i--) { if (!*sz) *pch = ' '; /* and don't increment sz beyond the terminating NULL! */ else { *pch = *sz; if (uFlags & MMIO_TOUPPER) //#ifdef DBCS // we don't allow DBCS string. This is enough for us. *pch = (char)(WORD)PtrToUlong(AnsiUpper((LPSTR)(DWORD_PTR)((ULONG)*pch & 0xff))); //#else // *pch = (char)(WORD)(LONG)AnsiUpper((LPSTR)(LONG)*pch); //#endif sz++; } pch++; } return fcc; } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api LPMMIOPROC | mmioInstallIOProc | This function installs or removes a custom I/O procedure. It will also locate an installed I/O procedure, given its corresponding four-character code. @parm FOURCC | fccIOProc | Specifies a four-character code identifying the I/O procedure to install, remove, or locate. All characters in this four-character code should be uppercase characters. @parm LPMMIOPROC | pIOProc | Specifies the address of the I/O procedure to install. To remove or locate an I/O procedure, set this parameter to NULL. @parm DWORD | dwFlags | Specifies one of the following flags indicating whether the I/O procedure is being installed, removed, or located: @flag MMIO_INSTALLPROC | Installs the specified I/O procedure. @flag MMIO_GLOBALPROC | This flag is a modifier to the install flag, and indicates the I/O procedure should be installed for global use. This flag is ignored on removal or find. @flag MMIO_REMOVEPROC | Removes the specified I/O procedure. @flag MMIO_FINDPROC | Searches for the specified I/O procedure. @rdesc The return value is the address of the I/O procedure installed, removed, or located. If there is an error, the return value is NULL. @comm If the I/O procedure resides in the application, use for compatibility with 16 bit windows to get a procedure-instance address and specify this address for

. You don't need to get a procedure-instance address if the I/O procedure resides in a DLL. @cb LONG FAR PASCAL | IOProc | is a placeholder for the application-supplied function name. The actual name must be exported by including it in a EXPORTS statement in the application's module-definitions file. @parm LPSTR | lpmmioinfo | Specifies a pointer to an structure containing information about the open file. The I/O procedure must maintain the field in this structure to indicate the file offset to the next read or write location. The I/O procedure can use the field to store state information. The I/O procedure should not modify any other fields of the structure. @parm UINT | wMsg | Specifies a message indicating the requested I/O operation. Messages that can be received include , , , , and . @parm LONG | lParam1 | Specifies a parameter for the message. @parm LONG | lParam2 | Specifies a parameter for the message. @rdesc The return value depends on the message specified by

. If the I/O procedure does not recognize a message, it should return zero. @comm The four-character code specified by the field in the structure associated with a file identifies a filename extension for a custom storage system. When an application calls with a filename such as "foo.xyz!bar", the I/O procedure associated with the four-character code "XYZ " is called to open the "bar" element of the file "foo.xyz". The function maintains a separate list of installed I/O procedures for each Windows application. Therefore, different applications can use the same I/O procedure identifier for different I/O procedures without conflict. Installing an I/O procedure globally however enables any process to use the procedure. If an application calls more than once to register the same I/O procedure, then it must call to remove the procedure once for each time it installed the procedure. will not prevent an application from installing two different I/O procedures with the same identifier, or installing an I/O procedure with one of the predefined identifiers ("DOS ", "MEM "). The most recently installed procedure takes precedence, and the most recently installed procedure is the first one to get removed. When searching for a specified I/O procedure, local procedures are searched first, then global procedures. @xref mmioOpen */ /*--------------------------------------------------------------------*/ LPMMIOPROC APIENTRY mmioInstallIOProcW(FOURCC fccIOProc, LPMMIOPROC pIOProc, DWORD dwFlags) { V_FLAGS(dwFlags, MMIO_VALIDPROC, mmioInstallIOProc, NULL); dwFlags |= MMIO_UNICODEPROC; return mmioInternalInstallIOProc( fccIOProc, pIOProc, dwFlags); } LPMMIOPROC APIENTRY mmioInstallIOProcA(FOURCC fccIOProc, LPMMIOPROC pIOProc, DWORD dwFlags) { V_FLAGS(dwFlags, MMIO_VALIDPROC, mmioInstallIOProc, NULL); dwFlags &= ~MMIO_UNICODEPROC; return mmioInternalInstallIOProc( fccIOProc, pIOProc, dwFlags); } static LPMMIOPROC mmioInternalInstallIOProc( FOURCC fccIOProc, // I/O Proc 4 char id LPMMIOPROC pIOProc, // pointer to any I/O proc to install DWORD dwFlags // flags from caller ) { IOProcMapEntry *pEnt; // an entry in linked list HANDLE hTaskCurrent; // current Windows task handle #ifdef DUMPIOPROCLIST // dprintf(("initial I/O proc list\n")); // DumpIOProcList(); #endif if (fccIOProc == 0L) return NULL; hTaskCurrent = GetCurrentTask(); if (dwFlags & MMIO_INSTALLPROC) { /* install I/O procedure -- always add at the beginning of * the list, so it overrides any other I/O procedures * with the same identifier installed by the same task */ V_CALLBACK((FARPROC)pIOProc, NULL); if ((pEnt = (IOProcMapEntry NEAR *) NewHandle(TYPE_MMIO, NULL, sizeof(IOProcMapEntry))) == NULL) return NULL; // out of memory // Implicitly acquired by NewHandle() ReleaseHandleListResource(); pEnt->fccIOProc = fccIOProc; pEnt->pIOProc = pIOProc; pEnt->hTask = hTaskCurrent; pEnt->pNext = gIOProcMapHead; gIOProcMapHead = pEnt; #ifdef DUMPIOPROCLIST // dprintf(("I/O proc list after addition")); // DumpIOProcList(); #endif return pIOProc; } if (!pIOProc) if (dwFlags & MMIO_REMOVEPROC) return RemoveIOProc(fccIOProc, hTaskCurrent); else if (dwFlags & MMIO_FINDPROC) { pEnt = FindIOProc(fccIOProc, hTaskCurrent); return ( pEnt==NULL ? NULL : pEnt->pIOProc ); } return NULL; // couldn't find requested I/O procedure } /*--------------------------------------------------------------------*/ /* @doc EXTERNAL @api LRESULT | mmioSendMessage | This function sends a message to the I/O procedure associated with the specified file. @parm HMMIO | hmmio | Specifies the file handle for a file opened with . @parm UINT | wMsg | Specifies the message to send to the I/O procedure. @parm LONG | lParam1 | Specifies a parameter for the message. @parm LONG | lParam2 | Specifies a parameter for the message. @rdesc The return value depends on the message. If the I/O procedure does not recognize the message, the return value is zero. @comm Use this function to send custom user-defined messages. Do not use it to send the , , , , , or messages. Define custom messages to be greater than or equal to the MMIOM_USER constant. @xref mmioInstallIOProc */ /*--------------------------------------------------------------------*/ LRESULT APIENTRY mmioSendMessage(HMMIO hmmio, UINT uMsg, LPARAM lParam1, LPARAM lParam2) { V_HANDLE(hmmio, TYPE_MMIO, (LRESULT)0); return IOProc( (PMMIO)hmmio, uMsg, lParam1, lParam2); } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @api LONG | mmioDiskIO | Perform an unbuffered read or write. Do not assume where the current disk offset

will be. @parm PMMIO | pmmio | The open file handle returned by . @parm UINT | wMsg | MMIOM_READ if should read from the disk, or MMIOM_WRITE if should write to the disk, or MMIOM_WRITEFLUSH if should flush all pending I/O. @parm LPSTR | pch | The buffer to read into or write from. @parm LONG | cch | The number of bytes to read or write. changes the disk offset to be

and then performs an MMIOM_READ or MMIOM_WRITE operation as specified by

,

, and

. Note that if the I/O buffer is not empty at this point, this function may not do what you expect. Do not call this function for memory files. */ /*--------------------------------------------------------------------*/ static LONG NEAR PASCAL mmioDiskIO(PMMIO pmmio, UINT uMsg, LPSTR pch, LONG cch) { if (pmmio->lDiskOffset != pmmio->lBufOffset) { if (IOProc( pmmio , MMIOM_SEEK , (LONG) pmmio->lBufOffset , (LONG) SEEK_SET ) == -1 ) return -1; } return (LONG)IOProc( pmmio, uMsg, (LPARAM) pch, (LPARAM) cch); } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @api UINT | mmioExpandMemFile | Assuming that

is a memory file, expand it by

bytes or

bytes, whichever is larger. Do not disturb the contents of the buffer or change the current file position. @parm PMMIO | pmmio | The open file handle returned by . @parm LONG | lExpand | The minimum number of bytes to expand the buffer by. @rdesc If the function succeeds, zero is returned. If the function fails, an error code is returned. In particular, MMIOERR_OUTOFMEMORY is returned if memory reallocation failed. @comm Only call this function for memory files. */ /*--------------------------------------------------------------------*/ static UINT NEAR PASCAL mmioExpandMemFile(PMMIO pmmio, LONG lExpand) { MMIOMEMINFO * pInfo = (MMIOMEMINFO *) pmmio->adwInfo; DWORD dwFlagsTemp; UINT w; /* make sure buffer can be expanded */ /* Note: we used to check ALLOC_BUF here, we don't now. */ if (pInfo->lExpand == 0) return MMIOERR_CANNOTEXPAND; // cannot grow file /* how much should the buffer be expanded by? */ if (lExpand < pInfo->lExpand) lExpand = pInfo->lExpand; dwFlagsTemp = pmmio->dwFlags; pmmio->dwFlags |= MMIO_ALLOCBUF; w = mmioSetBuffer(((HMMIO)pmmio), NULL, pmmio->cchBuffer + lExpand, 0); pmmio->dwFlags = dwFlagsTemp; return w; } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @api LRESULT | mmioDOSIOProc | The 'DOS' I/O procedure, which handles I/O on ordinary DOS files. @parm LPSTR | lpmmioinfo | A pointer to an MMIOINFO block that contains information about the open file. @parm UINT | uMsg | The message that the I/O procedure is being asked to execute. @parm LONG | lParam1 | Specifies additional message information. @parm LONG | lParam2 | Specifies additional message information. @rdesc Return value depends on

. */ /*--------------------------------------------------------------------*/ LRESULT mmioDOSIOProc(LPSTR lpmmioStr, UINT uMsg, LPARAM lParam1, LPARAM lParam2) { PMMIO pmmio = (PMMIO)lpmmioStr; // only in DLL! MMIODOSINFO *pInfo = (MMIODOSINFO *)pmmio->adwInfo; LONG lResult; LPWSTR szFilePart; WCHAR szPath[ MAX_PATH ]; switch (uMsg) { case MMIOM_OPEN: /* * The extra info parameter optionally contains a * sequence number to pass. */ if ( pmmio->dwFlags & MMIO_GETTEMP ) { V_RPOINTER((LPSTR)lParam1, 4, (LRESULT) MMSYSERR_INVALPARAM); if ( GetTempPathW( MAX_PATH, szPath ) == 0 ) { wcscpy( szPath, (LPCWSTR)L"." ); } return GetTempFileNameW( szPath, (LPCWSTR)L"sje", (WORD)pmmio->adwInfo[0], (LPWSTR)lParam1 ) ? (LRESULT)0 : (LRESULT)MMIOERR_FILENOTFOUND; } /*------------------------------------------------------------*\ * is either a file name or NULL; if it is * NULL, then , which is actually fh>, * should already contain an open DOS file handle. * * Does lParam1 point to a file name ? * * if so then either: * * delete the file, * check the existance of the file, * parse the file name, or * open the file name * \*------------------------------------------------------------*/ if ( lParam1 != 0 ) { if ( pmmio->dwFlags & MMIO_DELETE ) { return DeleteFileW( (LPWSTR)lParam1 ) ? (LRESULT)0 : (LRESULT)MMIOERR_FILENOTFOUND; } if ( pmmio->dwFlags & MMIO_EXIST ) { if ( !(pmmio->dwFlags & MMIO_CREATE) ) { #ifdef LATER I think this should be using SearchPath (with lpszPath==lParam1) as the definition of MMIO_EXIST states that a fully qualified filename is returned. OR tweak the flags to turn MMIO_PARSE ON and execute the next section. #endif if ( GetFileAttributesW( (LPWSTR)lParam1 ) == -1 ) { return (LRESULT)MMIOERR_FILENOTFOUND; } return (LRESULT)0; } } if ( pmmio->dwFlags & MMIO_PARSE ) { if ( GetFullPathNameW((LPWSTR)lParam1, MAX_PATH, szPath, &szFilePart ) == 0 ) { return (LRESULT)MMIOERR_FILENOTFOUND; } wcscpy( (LPWSTR)lParam1, szPath ); return (LRESULT) 0; } { DWORD dwAccess = 0; DWORD dwSharedMode = 0; DWORD dwCreate = 0; DWORD dwFlags = FILE_ATTRIBUTE_NORMAL; /*----------------------------------------------------*\ * Look at the access flags \*----------------------------------------------------*/ if ( pmmio->dwFlags & MMIO_WRITE ) { dwAccess = GENERIC_WRITE; } else { dwAccess = GENERIC_READ; } if ( pmmio->dwFlags & MMIO_READWRITE ) { dwAccess |= (GENERIC_WRITE | GENERIC_READ); } /*----------------------------------------------------*\ * Set dwSharedMode from the share flags \*----------------------------------------------------*/ { /* owing to some crappy design in WIN3.1, the share flags are * exclusive = 10 * deny write = 20 * deny read = 30 * deny none = 40 * so deny read looks like exclusive + deny write. Sigh. * 00 is taken as being DENYNONE (probably correct) * So is 50, 60 and 70 (which is probably bogus). * As we need to support the DOS flags for WOW, we need this * code somewhere, so might as well leave the flag definitions * as they are. First pull out all the share mode bits. */ DWORD dwShare = MMIO_DENYWRITE | MMIO_DENYREAD | MMIO_DENYNONE | MMIO_EXCLUSIVE; dwShare &= pmmio->dwFlags; switch (dwShare) { case MMIO_DENYWRITE: dwSharedMode = FILE_SHARE_READ; break; case MMIO_DENYREAD: dwSharedMode = FILE_SHARE_WRITE; break; case MMIO_EXCLUSIVE: dwSharedMode = 0; break; case MMIO_DENYNONE: default: dwSharedMode = FILE_SHARE_WRITE | FILE_SHARE_READ; break; #ifdef later Generate an error for invalid flags? #endif } } /*----------------------------------------------------*\ * Look at the create flags \*----------------------------------------------------*/ if ( (pmmio->dwFlags) & MMIO_CREATE) { dwCreate = CREATE_ALWAYS; wcscpy( szPath, (LPWSTR)lParam1 ); } else { dwCreate = OPEN_EXISTING; if ( SearchPathW( NULL, (LPWSTR)lParam1, NULL, (MAX_PATH - 1), szPath, &szFilePart ) == 0 ) { return (LRESULT)MMIOERR_FILENOTFOUND; } } pInfo->fh = (int)(DWORD_PTR)CreateFileW( szPath, dwAccess, dwSharedMode, NULL, dwCreate, dwFlags | FILE_FLAG_SEQUENTIAL_SCAN, NULL ); if ( pInfo->fh == (int)-1 ) { return (LRESULT)MMIOERR_FILENOTFOUND; } if ( pmmio->dwFlags & MMIO_EXIST ) { CloseHandle( (HANDLE)(UINT_PTR)pInfo->fh ); return (LRESULT)0; } } } /* check the current file offset */ pmmio->lDiskOffset = _llseek(pInfo->fh, 0L, SEEK_CUR); return (LRESULT)0; case MMIOM_CLOSE: /* MMIO_FHOPEN flag means keep the DOS file handle open */ if ( !((DWORD)lParam1 & MMIO_FHOPEN) && (_lclose(pInfo->fh) == HFILE_ERROR) ) { return (LRESULT) MMIOERR_CANNOTCLOSE; } return (LRESULT) 0; case MMIOM_READ: lResult = _lread(pInfo->fh, (LPVOID)lParam1, (LONG)lParam2); if (lResult != -1L) { pmmio->lDiskOffset += lResult; } return (LRESULT) lResult; case MMIOM_WRITE: case MMIOM_WRITEFLUSH: lResult = _lwrite(pInfo->fh, (LPVOID)lParam1, (LONG)lParam2); if (lResult != -1L) { pmmio->lDiskOffset += lResult; } #ifdef DOSCANFLUSH if (uMsg == MMIOM_WRITEFLUSH) { /* Issue hardware flush command */ } #endif return (LRESULT) lResult; case MMIOM_SEEK: lResult = _llseek(pInfo->fh, (LONG)lParam1, (int)(LONG)lParam2); if (lResult != -1L) { pmmio->lDiskOffset = lResult; } return (LRESULT) lResult; case MMIOM_RENAME: if (!MoveFileW((LPWSTR)lParam1, (LPWSTR)lParam2)) { return (LRESULT) MMIOERR_FILENOTFOUND; /* ??? There are other errors too? e.g. target exists? */ } break; } return (LRESULT) 0; } /*--------------------------------------------------------------------*/ /* @doc INTERNAL @api LRESULT | mmioMEMIOProc | The 'MEM' I/O procedure, which handles I/O on memory files. @parm LPSTR | lpmmioinfo | A pointer to an MMIOINFO block that contains information about the open file. @parm UINT | uMsg | The message that the I/O procedure is being asked to execute. @parm LONG | lParam1 | Specifies additional message information. @parm LONG | lParam2 | Specifies additional message information. @rdesc Return value depends on

. */ /*--------------------------------------------------------------------*/ LRESULT mmioMEMIOProc(LPSTR lpmmioStr, UINT uMsg, LPARAM lParam1, LPARAM lParam2) { PMMIO pmmio = (PMMIO) lpmmioStr; // only in DLL! switch (uMsg) { case MMIOM_OPEN: if ( pmmio->dwFlags & ~(MMIO_CREATE | MMIO_READWRITE | MMIO_WRITE | MMIO_EXCLUSIVE | MMIO_DENYWRITE | MMIO_DENYREAD | MMIO_DENYNONE | MMIO_ALLOCBUF ) ) return (LRESULT) MMSYSERR_INVALFLAG; /* all the data in the buffer is valid */ if (!(pmmio->dwFlags & MMIO_CREATE)) pmmio->pchEndRead = pmmio->pchEndWrite; return (LRESULT) 0; case MMIOM_CLOSE: /* nothing special to do on close */ return (LRESULT) 0; case MMIOM_READ: case MMIOM_WRITE: case MMIOM_WRITEFLUSH: case MMIOM_SEEK: return (LRESULT) -1; } return (LRESULT) 0; }