// // thread sync. timeouts // #define RX_WAIT_ACK_TERMINATE_TIMEOUT 60000 #define RX_ACK_THRD_TIMEOUT 3000 #define TX_WAIT_ACK_TERMINATE_TIMEOUT 60000 // // TIFF encoder/decoder defs. // #define LINE_LENGTH 1728 #define FAX_SUCCESS 0 #define FAX_FAILURE 1 #define RET_FAIL 0 #define RET_SUCCESS 1 #define RET_TIMEOUT 2 #define RET_CANCELED 3 #define LOG_ALL 256 #define LOG_ERR 1 #define LOG_NOTHING 0 #define T30_RX 1 #define T30_TX 2 typedef struct { DWORD tiffCompression; BOOL HiRes; char lpszLineID[16]; // to be used for a temp. TIFF page data file } TX_THRD_PARAMS; #define DECODE_BUFFER_SIZE 44000 #define MODEMKEY_FROM_UNIMODEM 1 #define MODEMKEY_FROM_ADAPTIVE 2 #define MODEMKEY_FROM_NOTHING 3 //identify.c typedef struct { DWORD_PTR hglb; // Tmp globall alloc "handle" for strings. // type HGLOBAL for non-ifax and LPVOID // for IFAX LPBYTE lpbBuf; LPSTR szReset; // MAXCMDSIZE LPBYTE szSetup; // MAXCMDSIZE LPBYTE szExit; // MAXCMDSIZE LPBYTE szPreDial; // MAXCMDSIZE LPBYTE szPreAnswer; // MAXCMDSIZE LPBYTE szIDCmd; // MAXCMDSIZE LPBYTE szID; // MAXIDSIZE LPBYTE szResponseBuf; // RESPONSEBUFSIZE LPBYTE szSmallTemp1; // SMALLTEMPSIZE LPBYTE szSmallTemp2; // SMALLTEMPSIZE LPMODEMCAPS lpMdmCaps; LPMODEMEXTCAPS lpMdmExtCaps; DWORD dwSerialSpeed; DWORD dwFlags; // dwFlags, as defined in the CMDTAB structure. DWORD dwGot; USHORT uDontPurge; // Profile entry says shouldn't delete the profile. // NOTE: We will ignore this and not delete the // profile if we don't get a response from the // modem, to avoid unnecessarily deleting the // profile simply because the modem is not // responding/off/disconnected. // // 0 = purge // 1 = don't purge // anything else = uninitialized. } S_TmpSettings; typedef struct tagThreadGlobal { // t30.c int RecoveryIndex; ET30PARAMS Params; // protocol\t30.h ET30T30 T30; // same ET30ECM ECM; // same ET30ECHOPROTECT EchoProtect; // same // protapi.c PROT ProtInst; // protocol\protocol.h PROTPARAMS ProtParams; // headers\protparm.h // ddi.c MODEMPARAMS ModemParams; // headers\modemddi.h CLASS1_MODEM Class1Modem; // class1\class1.h CLASS1_STATUS Class1Status;// same // ifddi.c CLASS1_DDI DDI; // same // 4. fcom.c FCOM_COMM Comm; // comm\fcomint.h BOOL fNCUAbort;// same, 0=None 2=abort FCOM 1=abort higher level only // identify.c S_TmpSettings TmpSettings; // here // ncuparams.c NCUPARAMS NCUParams; // headers\ncuparm.h BOOL fNCUParamsChanged; //comm\modemint.h, to indicate the we need to reset params on next dial/answer... // modem.c FCOM_MODEM FComModem; // same FCOM_STATUS FComStatus; // same INSTDATA Inst; // fxrn\efaxrun.h HLINE LineHandle; HCALL CallHandle; DWORD DeviceId; HANDLE FaxHandle; HANDLE hComm; // memory management USHORT uCount; USHORT uUsed; BUFFER bfStaticBuf[STATICBUFCOUNT]; BYTE bStaticBufData[STATICBUFSIZE]; // additional mostly from gTAPI int fGotConnect; HANDLE hevAsync; int fWaitingForEvent; DWORD dwSignalledRID; DWORD dwSignalledParam2; DWORD_PTR dwSignalledParam3; DWORD dwPermanentLineID; char lpszPermanentLineID[16]; char lpszUnimodemFaxKey[200]; char lpszUnimodemKey[200]; TIFF_INFO TiffInfo; LPBYTE TiffData; int TiffPageSizeAlloc; int TiffOffset; int fTiffOpenOrCreated; char lpszDialDestFax[sizeof(LINETRANSLATEOUTPUT)+64]; DWORD StatusId; DWORD StringId; DWORD PageCount; LPTSTR CSI; LPTSTR CallerId; LPTSTR RoutingInfo; int fDeallocateCall; int CurrentCommSpeed; HANDLE CtrlEvent; COMM_CACHE CommCache; BOOL fMegaHertzHack; MONINFO gMonInfo; FCOM_FILTER Filter; #ifdef SMM #define MAXFILTERBUFSIZE 2048 BYTE bStaticFilterBuf[MAXFILTERBUFSIZE]; #endif #define CMDTABSIZE 100 BYTE bModemCmds[CMDTABSIZE]; // store modem cmds read from INI/registry here #define SMALLTEMPSIZE 80 char szSmallTemp1[SMALLTEMPSIZE]; char szSmallTemp2[SMALLTEMPSIZE]; COMMODEM_FRAMING Framing; #ifdef SMM #define FRAMEBUFINITIALSIZE ((USHORT)(((4 + 256 + 2) * 1.2) + 10)) // extra for flags BYTE bStaticFramingBuf[FRAMEBUFINITIALSIZE]; #endif BYTE bRem[MAXNSFFRAMESIZE]; BYTE bOut[MAXNSFFRAMESIZE]; PROTDUMP fsDump; #ifndef NOCHALL BYTE bSavedChallenge[POLL_CHALLENGE_LEN]; USHORT uSavedChallengeLen; #endif #define TOTALRECVDFRAMESPACE 500 #ifdef SMM BYTE bStaticRecvdFrameSpace[TOTALRECVDFRAMESPACE]; #endif DWORD lEarliestDialTime; RFS rfsSend; WORD PrevcbInQue; WORD PrevcbOutQue; BOOL PrevfXoffHold; BOOL PrevfXoffSent; LPWSTR lpwFileName; HANDLE CompletionPortHandle; ULONG_PTR CompletionKey; // helper thread interface BOOL fTiffThreadRunning; TX_THRD_PARAMS TiffConvertThreadParams; BOOL fTiffThreadCreated; HANDLE hThread; HANDLE ThrdSignal; HANDLE FirstPageReadyTxSignal; DWORD CurrentOut; DWORD FirstOut; DWORD LastOut; DWORD CurrentIn; BOOL ThrdRuns; BOOL ReqTerminate; BOOL AckTerminate; BOOL ReqStartNewPage; BOOL AckStartNewPage; BOOL ThreadFatalError; char InFileName[_MAX_FNAME]; HANDLE InFileHandle; BOOL InFileHandleNeedsBeClosed; BOOL fTxPageDone; BOOL fTiffPageDone; BOOL fTiffDocumentDone; // helper RX interface BOOL fPageIsBad; BOOL fLastReadBlock; HANDLE ThrdDoneSignal; HANDLE ThrdAckTerminateSignal; DWORD ThrdDoneRetCode; DWORD BytesIn; DWORD BytesInNotFlushed; DWORD BytesOut; DWORD BytesOutWillBe; char OutFileName[_MAX_FNAME]; HANDLE OutFileHandle; BOOL SrcHiRes; // error reporting BOOL fFatalErrorWasSignaled; // abort sync. HANDLE AbortReqEvent; HANDLE AbortAckEvent; BOOL fUnblockIO; // pending I/O should be aborted ONCE only BOOL fOkToResetAbortReqEvent; BOOL fAbortReqEventWasReset; BOOL fAbortRequested; // CSID, TSID local/remote char LocalID[MAXTOTALIDLEN + 2]; LPWSTR RemoteID; BOOL fRemoteIdAvail; // Adaptive Answer BOOL AdaptiveAnswerEnable; // Unimodem setup DWORD dwSpeakerVolume; DWORD dwSpeakerMode; BOOL fBlindDial; // INF settings BOOL fEnableHardwareFlowControl; UWORD SerialSpeedInit; BOOL SerialSpeedInitSet; UWORD SerialSpeedConnect; BOOL SerialSpeedConnectSet; UWORD FixSerialSpeed; BOOL FixSerialSpeedSet; BOOL fCommInitialized; // derived from INF UWORD CurrentSerialSpeed; // Unimodem key info char ResponsesKeyName[300]; // new ADAPTIVE.INF DWORD FaxClass; char *ResetCommand; char *SetupCommand; DWORD AnswerCommandNum; char *AnswerCommand[20]; char *ModemResponseFaxDetect; char *ModemResponseDataDetect; UWORD SerialSpeedFaxDetect; UWORD SerialSpeedDataDetect; char *HostCommandFaxDetect; char *HostCommandDataDetect; char *ModemResponseFaxConnect; char *ModemResponseDataConnect; BOOL Operation; // Flags to indicate the source of INF info BOOL fAdaptiveRecordFound; BOOL fAdaptiveRecordUnique; BOOL fUnimodemFaxDefined; DWORD AdaptiveCodeId; DWORD ModemKeyCreationId; // Class2 DWORD ModemClass; USHORT cbResponseSize; BYTE lpbResponseBuf[RESPONSE_BUF_SIZE]; CL2_COMM_ARRAY class2_commands; BOOL fRecvPageOK; // flag set when Class2GetRecvPageAck is called NCUPARAMS NCUParams2; LPCMDTAB lpCmdTab; PROTPARAMS ProtParams2; BYTE bLastReply2[REPLYBUFSIZE+1]; BYTE bFoundReply[REPLYBUFSIZE+1]; MFRSPEC CurrentMFRSpec; BYTE Class2bDLEETX[3]; BYTE lpbResponseBuf2[RESPONSE_BUF_SIZE]; BCwithTEXT bcSendCaps; // Used to generate DIS BCwithTEXT bcSendParams; // Used to generate DCS PCB DISPcb; // has default DIS values for this modem. BOOL fAbort; // flag set when Class2Abort is called TO toAnswer; TO toRecv; TO toDialog; TO toZero; #define C2SZMAXLEN 50 C2SZ cbszFDT[C2SZMAXLEN]; C2SZ cbszINITIAL_FDT[C2SZMAXLEN]; C2SZ cbszFDR[C2SZMAXLEN]; C2SZ cbszFPTS[C2SZMAXLEN]; C2SZ cbszFCR[C2SZMAXLEN]; C2SZ cbszFNR[C2SZMAXLEN]; C2SZ cbszFCQ[C2SZMAXLEN]; C2SZ cbszFLO[C2SZMAXLEN]; C2SZ cbszFBUG[C2SZMAXLEN]; C2SZ cbszSET_FBOR[C2SZMAXLEN]; // DCC - set High Res, Huffman, no ECM/BFT, default all others. C2SZ cbszFDCC_ALL[C2SZMAXLEN]; C2SZ cbszFDCC_RECV_ALL[C2SZMAXLEN]; C2SZ cbszFDIS_RECV_ALL[C2SZMAXLEN]; C2SZ cbszFDCC_RES[C2SZMAXLEN]; C2SZ cbszFDCC_BAUD[C2SZMAXLEN]; C2SZ cbszFDIS_BAUD[C2SZMAXLEN]; C2SZ cbszFDIS_IS[C2SZMAXLEN]; C2SZ cbszFDIS_NOQ_IS[C2SZMAXLEN]; C2SZ cbszFDCC_IS[C2SZMAXLEN]; C2SZ cbszFDIS_STRING[C2SZMAXLEN]; C2SZ cbszFDIS[C2SZMAXLEN]; C2SZ cbszZERO[C2SZMAXLEN]; C2SZ cbszONE[C2SZMAXLEN]; C2SZ cbszQUERY_S1[C2SZMAXLEN]; C2SZ cbszRING[C2SZMAXLEN]; C2SZ cbszCLASS2_ATI[C2SZMAXLEN]; C2SZ cbszCLASS2_FMFR[C2SZMAXLEN]; C2SZ cbszCLASS2_FMDL[C2SZMAXLEN]; C2SZ cbszCLASS2_FREV[C2SZMAXLEN]; C2SZ cbszFDT_CONNECT[C2SZMAXLEN]; C2SZ cbszFDT_CNTL_Q[C2SZMAXLEN]; C2SZ cbszFCON[C2SZMAXLEN]; C2SZ cbszGO_CLASS2[C2SZMAXLEN]; C2SZ cbszFLID[C2SZMAXLEN]; C2SZ cbszENDPAGE[C2SZMAXLEN]; C2SZ cbszENDMESSAGE[C2SZMAXLEN]; C2SZ cbszCLASS2_QUERY_CLASS[C2SZMAXLEN]; C2SZ cbszCLASS2_GO_CLASS0[C2SZMAXLEN]; C2SZ cbszCLASS2_ATTEN[C2SZMAXLEN]; C2SZ cbszATA[C2SZMAXLEN]; // Bug1982: Racal modem, doesnt accept ATA. So we send it a PreAnswer // command of ATS0=1, i.r. turning ON autoanswer. And we ignore the // ERROR response it gives to the subsequent ATAs. It then answers // 'automatically' and gives us all the right responses. On hangup // however we need to send an ATS0=0 to turn auto-answer off. The // ExitCommand is not sent at all in Class2 and in Class1 it is only // sent on releasing the modem, not between calls. So just send an S0=0 // after the ATH0. If the modem doesnt like it we ignore the response // anyway C2SZ cbszCLASS2_HANGUP[C2SZMAXLEN]; C2SZ cbszCLASS2_CALLDONE[C2SZMAXLEN]; C2SZ cbszCLASS2_ABORT[C2SZMAXLEN]; C2SZ cbszCLASS2_DIAL[C2SZMAXLEN]; C2SZ cbszCLASS2_NODIALTONE[C2SZMAXLEN]; C2SZ cbszCLASS2_BUSY[C2SZMAXLEN]; C2SZ cbszCLASS2_NOANSWER[C2SZMAXLEN]; C2SZ cbszCLASS2_OK[C2SZMAXLEN]; C2SZ cbszCLASS2_FHNG[C2SZMAXLEN]; C2SZ cbszCLASS2_ERROR[C2SZMAXLEN]; C2SZ cbszCLASS2_RESET[C2SZMAXLEN]; C2SZ cbszCLASS2_ATE0[C2SZMAXLEN]; BYTE Resolution; BYTE Encoding; // Dbg DWORD CommLogOffset; DWORD dbg1; DWORD dbg2; DWORD dbg3; DWORD dbg4; DWORD dbg5; } ThrdGlbl, *PThrdGlbl;