[Identification]
    OptionType = NetTransport

[LanguagesSupported]
    ENG

[Options]
    ATMARPS

[OptionsTextENG]
    ATMARPS     = "IP over ATM (RFC 1577) ARP Server"

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "transport"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"

Manufacturer    = "Microsoft"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

ProductSoftwareName      = "AtmArpS"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\atmarps.sys"

ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Parameters"
ServiceKeyName  = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)
LinkageKeyName = $(!NTN_ServiceBase)"\"$(ProductSoftwareName)"\Linkage"

; type = Name,Class
NetRuleSoftwareType      = "AtmArpS ipatmserver"

; Class = new class name {existing class name | basic no|yes }
NetRuleSoftwareClass     = {"ipatmserver basic"}

; Use = Service | Transport | driver | adapter, yes|no, yes|no
NetRuleSoftwareUse       = $(SoftwareType)" no yes"

; BindForm = ObjectName yes|no yes|no container|simple|stream

NetRuleSoftwareBindForm  = """AtmArpS"" yes no container"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[platform]
    STF_PLATFORM = "" ? $(!LIBHANDLE) GetPlatform

[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        goto returnoptions
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
	set !DebugOutputControl = 1
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    Debug-Output "OEMSETUP.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
    Debug-Output "OEMSETUP.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = $(OK)
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    detect platform
    set-title  $(FunctionTitle)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
        Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "OEMSETUP.INF: ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        set Error = $($R0)
        set from = end
        set to = end
        goto nonfatalinfo
    else
        set StartLabel = installadapter
    endif
    set RadioDefault = 2
    set RadioIn = {$(RadioDefault)}
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
            $(ProductVersion)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error: cannot get an error string."
            goto ShellCodeError
        endif
        goto end
    endif
    CloseRegKey $(KeyProduct)
    goto installproduct


installproduct = +
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                   goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        Shell "" StripTrailSlash $(SrcDir)
        set PlatformDir  = $($R0)"\"$(STF_PLATFORM)
        set InfDir  = $($R0)"\"
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        set OEM_ABANDON_ON = TRUE
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareDisplayName), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "PNP_TDI", {}, "",+
            $(NetEventDLL)
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) !=  NO_ERROR
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalRegistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {Review,$(NoTitle),$(!REG_VT_DWORD),1},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalRegistry
        endif

; Setup the bindings net rules

        set NewValueList = {{type    ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)}, +
                            {use     ,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)

        set RegistryErrorIndex = $($R0)
        Ifstr $(RegistryErrorIndex) != NO_ERROR
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalRegistry
        endif

        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
    endif
    goto successful

bindingadapter =+

; Set the DependOnService Key

    Set RegKey = $(!NTN_ServiceBase)"\AtmArpS"
    OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) AtmArpKey
    ifstr(i) $(AtmArpKey) != ""
        SetRegValue $(AtmArpKey) {"DependOnService",$(NoTitle),$(!REG_VT_MULTI_SZ),{"Tcpip","ATMCallManager"}}
        CloseRegKey $(AtmArpKey)
    else
        Debug-Output "failed to open AtmArp key"
    endif

	OpenRegKey $(!REG_H_LOCAL) "" $(LinkageKeyName) $(MAXIMUM_ALLOWED) LinkageKey
	ifstr(i) $(LinkageKey) != ""
		GetRegValue $(LinkageKey) "Bind" BindList
		Debug-Output "BindList: "$(BindList)
		Set Binding = *($(BindList),4)
		Debug-Output "Binding:  "$(Binding)
		CloseRegKey $(LinkageKey)
	else
		Debug-Output "failed to open linkage for adapter"
		goto fatalregistry
	endif

	set CardList = {}
	set CreateCardList = {}
	ForListDo $(Binding)
		Split-String $($), "\", BindInfo
		QueryListSize BindListSize $(BindInfo)
		set CardName = *($(BindInfo),$(BindListSize))
		Debug-Output "Cardname: "$(CardName)
		ifstr(i) $(CardList) == {}
			set CardList = {$(CardName)}
		else
			set CardList = >($(CardList),$(CardName))
		endif
	EndForListDo


	Debug-Output "Cardlist: "$(CardList)
	ForListDo $(CardList)
		Debug-Output "ATMARPS: processing "$($)
		Set RegKey = $(!NTN_ServiceBase)"\"$($)"\Parameters\AtmArpS"
		Debug-Output "about to open "$(RegKey)
		OpenRegKey $(!REG_H_LOCAL) "" $(RegKey) $(MAXIMUM_ALLOWED) ArpParamsKey
		ifstr(i) $(ArpParamsKey) == ""
			Debug-Output "ATMARPS: creating ArpParamsKey key under the adapter"
			CreateRegKey $(!REG_H_LOCAL) {$(RegKey),$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ArpParamsKey
		else
			Debug-Output "ATMARPS: Have processed "$($)" already"
			CloseRegKey $(ArpParamsKey)
			goto continueCardList
		endif
		ifstr(i) $(ArpParamsKey) == ""
			Debug-Output "ATMARPS: Failed to open/create the ArpParamsKey key under the adapter"
			goto fatalRegistry
		endif

        SetRegValue $(ArpParamsKey) {"MulticastAddresses",$(NoTitle),$(!REG_VT_MULTI_SZ),{"224.0.0.0-239.255.255.255","255.255.255.255-255.255.255.255"}}

		CloseRegKey $(ArpParamsKey)

continueCardList = +
		
	EndForListDo

    goto successful

removeadapter = +
    Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
        $(ProductSoftwareName)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Debug-Output "ShellCode error"
        goto ShellCodeError
    endif
    set RegistryErrorIndex = $($R0)
    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
        goto fatalregistry
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        SetRegValue $(KeyProduct) {"Description",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)}
        SetRegValue $(KeyProduct) {"Title",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)}
        CloseRegKey $(KeyProduct)
        OpenRegKey $(!REG_H_LOCAL) "" $(ServiceKeyName) $(MAXIMUM_ALLOWED) ServiceKey
        ifstr(i) $(ServiceKey) != ""
            SetRegValue $(ServiceKey) {"DisplayName",$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDisplayName)}
            CloseRegKey $(ServiceKey)
        endif
    else
        goto fatalregistry
    endif
    goto end
successful = +
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto removeadapter
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[StripTrailSlash]
    Split-String $($0) "\" InList
    QueryListSize InListSize, $(InList)
    Ifint $(InListSize) <= 1
        Return $($0)
    Endif
    Set NewString = ""
    ForListDo $(InList)
        ifint $(#) < $(InListSize)
            Set NewString = $(NewString)$($)
        else-ifstr $($) != "\"
            Set NewString = $(NewString)$($)
        endif
    EndForListDo
    Return $(NewString)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-Platform-Drivers $(PlatformDir) $(!STF_WINDOWSSYSPATH)\drivers
        AddSectionFilesToCopyList Files-Platform-Utils   $(PlatformDir) $(!STF_WINDOWSSYSPATH)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    ifstr(i) $(DoConfig) == "YES"
    endif
    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-Platform-Drivers $(PlatformDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Platform-Utils   $(PlatformDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(InfDir) $(!STF_WINDOWSSYSPATH)
   exit

[Source Media Descriptions]
     1 = "Microsoft ATM Installation Disk"

[ProductType]
STF_PRODUCT  = Winnt

[Files-Inf]
1, OEMSETUP.INF, SIZE=999, RENAME=$(!UG_Filename)

[Files-Platform-Drivers]
1, ATMARPS.SYS , SIZE=999

[Files-Platform-Utils]

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"
FunctionTitle   = "IP over ATM (RFC 1577) Server"
ProductSoftwareDescription      = "IP over ATM Server"
ProductSoftwareDisplayName = "IP over ATM Server"
ProductSoftwareTitle    = "IP over ATM Server"
ShellCodeErrorTitle     = "Error: "$(FunctionTitle)
ShellCodeErrorText      = "Shell Code Error."
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"