;***********************************************************************
;
; OEMNADXN.INF
;
; UB network card and driver SETUP INF file.
;
; History:
; davidhov 00-Feb-1992 Created
; terryk 27-Feb-1992 Reorganize section location
; added comment
; terryk 03-Mar-1992 Changed to ub setup
; terryk 02-Apr-1992 Code review changed
; davidhov 03-Apr-1992 Enhanced to use new INF section
; structure from SunilP, et al.
;
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA and MCA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
EISA
"Jazz-Internal Bus"
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the OEM INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------
[LanguagesSupported]
ENG
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
UBPCXNS
UBPCEOTPXNS
;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user. There
; are separate sections for each language supported. The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------
[OptionsTextENG]
UBPCXNS = "UB Ethernet NIUpc Adapter [XNS]"
UBPCEOTPXNS = "UB Ethernet NIUpc/EOTP Adapter [XNS]"
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[IRQChoicesUBPCXNS]
IRQ_0 = "2",2
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
[IRQChoicesUBPCEOTPXNS]
IRQ_0 = "2",2
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "12",12
[IOBaseAddrChoices]
IOBase_1 = "0x350",848
IOBase_2 = "0x358",856
IOBase_3 = "0x360",864
IOBase_4 = "0x368",872
[MemMappedWndBaseAddrChoicesUBPCXNS]
Add_1 = "0x80000",524288
Add_2 = "0x88000",557056
Add_3 = "0x90000",589824
Add_4 = "0x98000",622592
Add_5 = "0xA0000",655360
Add_6 = "0xA8000",688128
Add_7 = "0xB0000",720896
Add_8 = "0xB8000",753664
Add_9 = "0xC0000",786432
Add_10 = "0xC8000",819200
Add_11 = "0xD0000",851968
Add_12 = "0xD8000",884736
Add_13 = "0xE0000",917504
Add_14 = "0xE8000",950272
[MemMappedWndBaseAddrChoicesUBPCEOTPXNS]
Add_2 = "0xC8000",819200
Add_4 = "0xD8000",884736
[FileConstants]
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;ShellCode = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;
; Product Info
;
Manufacturer = "Microsoft"
ProductMajorVersion = "4"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "Xns"
ProductSoftwareTitle = "UB Monolithic Transport and Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\xns.sys"
NetRuleSoftwareType = "ubStack netBiosTransport ubXnsDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """XNS"" yes no container"
NetRuleSoftwareClass = {"ubXnsDriver basic"}
NetRuleSoftwareBindable = {"ubXnsDriver ubAdapter exclusive exclusive 200"}
;
; Hardware
;
ProductHardwareName = "UB"
ProductHardwareUBPCXNSTitle = "Ungermann-Bass Ethernet NIUpc Adapter"
ProductHardwareUBPCEOTPXNSTitle = "Ungermann-Bass Ethernet NIUpc/EOTP Adapter"
NetRuleHardwareType = "ub ubAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ubAdapter basic"}
ProductOpSupport = 134 ; 0x0086 ; Display,Removable,Properties,Not Updatable
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
;***********************************************************************
; Language-Dependent Dialog Constants
;***********************************************************************
[SizeENG]
size_1 = 1, "Small"
size_2 = 2, "Big"
[FileConstantsENG]
;
; Variables to support thermometer gauge and error dialogs
;
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
;
; Product Info
;
FunctionTitle = "Ungermann-Bass Adapter Card Setup"
;
; Software
;
ProductSoftwareDescription = "UB Monolithic Transport and Driver"
;
; Hardware
;
ProductHardwareUBPCXNSDescription = "Ungermann-Bass Ethernet NIUpc Adapter"
ProductHardwareUBPCEOTPXNSDescription = "Ungermann-Bass Ethernet NIUpc/EOTP Adapter"
IRQList = ^(IRQChoices$(Option), 1)
IRQValues = ^(IRQChoices$(Option), 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
MemMappedWndAddrList = ^(MemMappedWndBaseAddrChoices$(Option), 1)
MemMappedWndAddrValues = ^(MemMappedWndBaseAddrChoices$(Option), 2)
SizeList = ^(Size$(!NTN_LANGUAGE), 1 )
SizeValue = ^(Size$(!NTN_LNAGUAGE), 2 )
[DialogConstantsENG]
;
; Common button names, etc.
;
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;-----------------------------------------------
; Input DIALOGS
;-----------------------------------------------
[FileDependentDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "UB"
Caption = $(FunctionTitle)
Label1 = "&Interrupt Number:"
Label2 = "I/O &Port Address:"
RadioBox = "Size:"
Radio1 = "&Small"
Radio2 = "&Big"
Label3 = "&Memory Address:"
Label4 = "&Net Number:"
Combo1List = $(IRQList)
Combo1Out = $(IRQValue)
Combo2List = $(IOBaseAddrList)
Combo2Out = $(IOBaseAddrValue)
Combo3List = $(MemMappedWndAddrList)
Combo3Out = $(MemMappedWndAddrValue)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = $(!IDH_DB_OEMNADUB_INS)
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;----------InstallOption-------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
Debug-Output "OEMNADXN.INF: STF_CWDDIR is: "$(!STF_CWDDIR)
Debug-Output "OEMNADXN.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE)
; define all the constants
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set CommonStatus = STATUS_REBOOT
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "OEMNADXN.INF: Cannot configure the driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; set the default values
; IRQ level = 5
set IRQValue = *($(IRQList), 4)
; IoBaseAddress = 0x368
set IOBaseAddrValue = *($(IOBaseAddrList), 4)
; Size = Small
set RadioIn = {1}
; Net Number = 1
set EditTextIn = "1"
; default mamory mapped window address is 884736 (0xd800)
set MemMappedWndAddrValue = *($(MemMappedWndAddrList),~($(MemMappedWndAddrValues),884736))
set EditTextIn = "1"
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
;
; First, check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
endif
Endif
Goto adapteroptions
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADXN.INF: Cannot find component product key"
Goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "OEMNADXN.INF: INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "OEMNADXN.INF: INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADXN.INF: Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE )
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemMappedWndAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "NetNumber"
set NetNumber = $(ValueData)
else-ifstr(i) $(ValueName) == "Size"
set Size = $(ValueData)
else-ifstr(i) $(ValueName) == "BusType"
set BusInterfaceType = $(ValueData)
else-ifstr(i) $(ValueName) == "BusNumber"
set BusNumber = $(ValueData)
endif
EndForListDo
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 4)
endif
ifint $(Size) == 0
set Size = 1
else
set Size = 2
endif
set RadioIn = {$(Size)}
set IOBaseAddrValue = *($(IOBaseAddrList), +
~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set MemMappedWndAddrValue = *($(MemMappedWndAddrList), +
~($(MemMappedWndAddrValues),$(MemMappedWndAddrIndex)))
ifstr(i) $(MemMappedWndAddrValue) == ""
set MemMappedWndAddrValue = *($(MemMappedWndAddrList),~($(MemMappedWndAddrValue),884736))
endif
ifstr(i) $(NetNumber) == $(KeyNull)
set EditTextIn = "1"
else
set EditTextIn = $(NetNumber)
endif
;
; Let the user bang on the options until satisfied.
;
adapteroptions = +
set from = adapteroptions
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQValueIndex = $(Combo1Out)
set IOBaseAddrIndex = $(Combo2Out)
set Size = *($(RadioOut),1)
ifint $(Size) == 1
set Size = 0
else
set Size = 1
endif
set MemMappedWndAddrIndex = $(Combo3Out)
set NetNumber = *($(EditTextOut), 1)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "OEMNADXN.INF: Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknown command
;
ui pop 1
Debug-Output "OEMNADXN.INF: Action: unknown. Bye."
goto end
endif
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
ifstr(i) $(!STF_NCDETINFO) == {}
; not detect. popup dialog.
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
else
; use the STF_NCDETINFO information
set BusInterfaceType = *($(!STF_NCDETINFO),5)
set BusNumber = *($(!STF_NCDETINFO),6)
endif
nextstep = +
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
; *****************************************************************
; New Product Installation
; *****************************************************************
;
; Add Software Component
;
Ifint $(OldVersionExisted) != $(FALSE)
Goto installhardware
Endif
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "TDI", {}, "",+
$(IoLogMsgDLL), ""
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADXN.INF: Registry error: add software components"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADXN.INF: Registry error: add value list for software product."
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
;
; Add the NetBIOS provider flag to the XNS\Parameters key
;
Set NewValueList = {{NbProvider,$(NoTitle),$(!REG_VT_SZ),"_xns"}}
Shell $(UtilityInf), AddValueList, $(SoftParameterKey), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error."
goto ShellCodeError
Endif
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADXN.INF: Registry error: add value list."
goto fatalregistry
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
installhardware =+
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADXN.INF: Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyProduct = $($R1)
set KeyAdapterRules = $($R2)
set KeyParameters = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error"
goto ShellCodeError
endif
CloseRegKey $(KeyProduct)
Set KeyProduct = ""
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error."
goto ShellCodeError
endif
CloseRegKey $(KeyAdapterRules)
Set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADXN.INF: Registry error: add value list."
CloseRegKey $(KeyParameters)
goto fatalregistry
Endif
;
; BUGBUG: Alter Netbios\Currentversion:Review=1 if present. This causes OEMNSVNB.INF to
; start reviewing bindings. MS Campus special.
;
Debug-Output "OEMNADXN.INF: Attempt to open Netbios key..."
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Netbios\CurrentVersion" $(MAXIMUM_ALLOWED) NetbiosKey
Ifstr(i) $(NetbiosKey) != $(KeyNull)
Set NewValueList = {{Review, $(NoTitle), $(!REG_VT_DWORD), 1}}
Shell $(UtilityInf), AddValueList, $(NetbiosKey), $(NewValueList)
Debug-Output "OEMNADXN.INF: Netbios changed to review bindings"
CloseRegKey $(NetbiosKey)
Endif
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
;
; Add the rest of the parameters to the Services area
;
Ifstr(i) $(KeyParameters) == $(KeyNull)
Debug-Output "OEMNADXN.INF: *** KeyParameters is NULL at writeparameters"
Endif
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues), +
~($(IOBaseAddrList),$(IOBaseAddrIndex)))
set MemMappedWndAddrValue = *($(MemMappedWndAddrValues), +
~($(MemMappedWndAddrList),$(MemMappedWndAddrIndex)))
ifstr(i) $(Option) == "UBPCXNS"
set CardType = "1"
else-ifstr(i) $(Option) == "UBPCEOTPXNS"
set CardType = "2"
else
set CardType = "3"
endif
set NewValueList = {+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{NetNumber,$(NoTitle),$(!REG_VT_DWORD),$(NetNumber)},+
{Size,$(NoTitle),$(!REG_VT_DWORD),$(Size)},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemMappedWndAddrValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error."
goto ShellCodeError
endif
Set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyParameters)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMNADXN.INF: Registry error: Add value list"
goto fatalregistry
Endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove RPC protocol string
Shell $(UtilityInf) RemoveRpcProtocol "ncacn_nb_xns"
;Ifstr(i) $($0) != NO_ERROR
; Debug-Output "OEMNADXN.INF: ERROR deleting RPC protocol data"
;Endif
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
; Upgrade software component
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
;
; Enumerate all netcards installed of this type and update them
;
set iSearch = 1
nextnetcard = +
Shell $(UtilityInf), FindNextNetworkCard, $(ProductHardwareName), $(iSearch)
set KeyNetcard = $($R0)
set iSearch = $($R1)
Debug-Output "OemNadEp.Inf: FindNextNetworkCard "$(KeyNetcard)","$(iSearch)
Ifstr $(KeyNetcard) != $(KeyNull)
Debug-Output "OemNadEp.Inf: Setting OperationsSupport value"
SetRegValue $(KeyNetcard) {OperationsSupport,$(NoTitle),$(!REG_VT_DWORD),$(ProductOpSupport)}
CloseRegKey $(KeyNetcard)
goto nextnetcard
Endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADXN.INF: ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
; Debug-Msg "Error Error Bad DLGEVENT"
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(FunctionTitle)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
;
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-exmb $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
Debug-Output "OEMNADXN.INF: [Install-Option] DoCopy = "$(DoCopy)
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
;
; Add product to registry
;
;
; Finish up
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-exmb $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
exit