/*++ Copyright (c) 1989-1993 Microsoft Corporation Module Name: Timer.c Abstract: This file contains the code to implement timer functions. Author: Jim Stewart (Jimst) 10-2-92 Revision History: --*/ #include "precomp.h" #include "timer.h" #include "ntddndis.h" // the timer Q tTIMERQ TimerQ; //******************* Pageable Routine Declarations **************** #ifdef ALLOC_PRAGMA #pragma CTEMakePageable(PAGE, InitTimerQ) #pragma CTEMakePageable(PAGE, DestroyTimerQ) #pragma CTEMakePageable(PAGE, DelayedNbtStopWakeupTimer) #endif // #pragma CTEMakePageable(PAGE, WakeupTimerExpiry) //******************* Pageable Routine Declarations **************** //---------------------------------------------------------------------------- NTSTATUS InterlockedCallCompletion( IN tTIMERQENTRY *pTimer, IN NTSTATUS status ) /*++ Routine Description: This routine calls the completion routine if it hasn't been called yet, by first getting the JointLock spin lock and then getting the Completion routine ptr. If the ptr is null then the completion routine has already been called. Holding the Spin lock interlocks this with the timer expiry routine to prevent more than one call to the completion routine. Arguments: Return Value: there is no return value --*/ { CTELockHandle OldIrq; COMPLETIONCLIENT pClientCompletion; // to synch. with the the Timer completion routines, Null the client completion // routine so it gets called just once, either from here or from the // timer completion routine setup when the timer was started.(in namesrv.c) // CTESpinLock(&NbtConfig.JointLock,OldIrq); pClientCompletion = pTimer->ClientCompletion; pTimer->ClientCompletion = NULL; if (pClientCompletion) { // remove the link from the name table to this timer block CHECK_PTR(((tNAMEADDR *)pTimer->pCacheEntry)); ((tNAMEADDR *)pTimer->pCacheEntry)->pTimer = NULL; CTESpinFree(&NbtConfig.JointLock,OldIrq); (*pClientCompletion) (pTimer->ClientContext, status); return(STATUS_SUCCESS); } else { CTESpinFree(&NbtConfig.JointLock,OldIrq); } return(STATUS_UNSUCCESSFUL); } //---------------------------------------------------------------------------- NTSTATUS InitTimerQ( IN int NumInQ ) /*++ Routine Description: This routine sets up the timer Q to have NumInQ entries to start with. These are blocks allocated for timers so that ExAllocatePool does not need to be done later. Arguments: Return Value: The function value is the status of the operation. --*/ { tTIMERQENTRY *pTimerEntry; CTEPagedCode(); InitializeListHead(&TimerQ.ActiveHead); InitializeListHead(&TimerQ.FreeHead); // allocate memory for the free list while(NumInQ--) { pTimerEntry = (tTIMERQENTRY *) NbtAllocMem (sizeof(tTIMERQENTRY), NBT_TAG2('15')); if (!pTimerEntry) { KdPrint(("Nbt.InitTimerQ: Unable to allocate memory!! - for the timer Q\n")); return(STATUS_INSUFFICIENT_RESOURCES); } else { pTimerEntry->Verify = NBT_VERIFY_TIMER_DOWN; InsertHeadList(&TimerQ.FreeHead, &pTimerEntry->Linkage); } } return(STATUS_SUCCESS); } //---------------------------------------------------------------------------- NTSTATUS DestroyTimerQ( ) /*++ Routine Description: This routine clears up the TimerQEntry structures allocated Arguments: Return Value: The function value is the status of the operation. --*/ { tTIMERQENTRY *pTimer; PLIST_ENTRY pEntry; CTEPagedCode(); while (!IsListEmpty (&TimerQ.FreeHead)) { pEntry = RemoveHeadList(&TimerQ.FreeHead); pTimer = CONTAINING_RECORD(pEntry, tTIMERQENTRY, Linkage); CTEMemFree(pTimer); } return(STATUS_SUCCESS); } //---------------------------------------------------------------------------- NTSTATUS GetTimerEntry( OUT tTIMERQENTRY **ppTimerEntry ) /*++ Routine Description: This routine gets a free block from the &TimerQ.FreeHead, and if the list is empty it allocates another memory block for the queue. NOTE: this function is called with the JointLock held. Arguments: Return Value: The function value is the status of the operation. --*/ { PLIST_ENTRY pEntry; tTIMERQENTRY *pTimerEntry; if (!IsListEmpty(&TimerQ.FreeHead)) { pEntry = RemoveHeadList(&TimerQ.FreeHead); pTimerEntry = CONTAINING_RECORD(pEntry,tTIMERQENTRY,Linkage); ASSERT (pTimerEntry->Verify == NBT_VERIFY_TIMER_DOWN); } else if (!(pTimerEntry = (tTIMERQENTRY *) NbtAllocMem (sizeof(tTIMERQENTRY), NBT_TAG2('16')))) { KdPrint(("Unable to allocate memory!! - for the timer Q\n")); return (STATUS_INSUFFICIENT_RESOURCES); } *ppTimerEntry = pTimerEntry; pTimerEntry->Verify = NBT_VERIFY_TIMER_ACTIVE; NbtConfig.NumTimersRunning++; return(STATUS_SUCCESS); } //---------------------------------------------------------------------------- VOID ReturnTimerToFreeQ( tTIMERQENTRY *pTimerEntry, BOOLEAN fLocked ) { CTELockHandle OldIrq; if (!fLocked) { CTESpinLock(&NbtConfig.JointLock,OldIrq); } // return the timer block ASSERT (pTimerEntry->Verify == NBT_VERIFY_TIMER_ACTIVE); pTimerEntry->Verify = NBT_VERIFY_TIMER_DOWN; InsertTailList(&TimerQ.FreeHead,&pTimerEntry->Linkage); if (!--NbtConfig.NumTimersRunning) { KeSetEvent(&NbtConfig.TimerQLastEvent, 0, FALSE); } if (!fLocked) { CTESpinFree(&NbtConfig.JointLock,OldIrq); } } //---------------------------------------------------------------------------- NTSTATUS CleanupCTETimer( IN tTIMERQENTRY *pTimerEntry ) /*++ Routine Description: This routine cleans up the timer. Called with the JointLock held. Arguments: Return Value: returns the reference count after the decrement --*/ { COMPLETIONROUTINE TimeoutRoutine; PVOID Context; PVOID Context2; pTimerEntry->RefCount = 0; // the expiry routine is not currently running so we can call the // completion routine and remove the timer from the active timer Q TimeoutRoutine = (COMPLETIONROUTINE)pTimerEntry->TimeoutRoutine; pTimerEntry->TimeoutRoutine = NULL; Context = pTimerEntry->Context; Context2 = pTimerEntry->Context2; if (pTimerEntry->pDeviceContext) { NBT_DEREFERENCE_DEVICE ((tDEVICECONTEXT *) pTimerEntry->pDeviceContext, REF_DEV_TIMER, TRUE); pTimerEntry->pDeviceContext = NULL; } // release any tracker block hooked to the timer entry.. This could // be modified to not call the completion routine if there was // no context value... ie. for those timers that do not have anything // to cleanup ...however, for now we require all completion routines // to have a if (pTimerQEntry) if around the code so when it gets hit // from this call it does not access any part of pTimerQEntry. // if (TimeoutRoutine) { // call the completion routine so it can clean up its own buffers // the routine that called this one will call the client's completion // routine. A NULL timerEntry value indicates to the routine that // cleanup should be done. (VOID)(*TimeoutRoutine) (Context, Context2, NULL); } // move to the free list RemoveEntryList(&pTimerEntry->Linkage); ReturnTimerToFreeQ (pTimerEntry, TRUE); return(STATUS_SUCCESS); } //---------------------------------------------------------------------------- NTSTATUS StartTimer( IN PVOID TimeoutRoutine, IN ULONG DeltaTime, IN PVOID Context, IN PVOID Context2, IN PVOID ContextClient, IN PVOID CompletionClient, IN tDEVICECONTEXT *pDeviceContext, OUT tTIMERQENTRY **ppTimerEntry, IN USHORT Retries, BOOLEAN fLocked) /*++ Routine Description: This routine starts a timer. It has to be called with the JointLock held! Arguments: The value passed in is in milliseconds - must be converted to 100ns so multiply to 10,000 Return Value: The function value is the status of the operation. --*/ { tTIMERQENTRY *pTimerEntry; NTSTATUS status; CTELockHandle OldIrq; // // Do not allow any timers to be started if we are currently // Unloading! // if (NbtConfig.Unloading) { return STATUS_UNSUCCESSFUL; } if (!fLocked) { CTESpinLock(&NbtConfig.JointLock,OldIrq); } if ((!pDeviceContext) || (NBT_REFERENCE_DEVICE (pDeviceContext, REF_DEV_TIMER, TRUE))) { // get a free timer block status = GetTimerEntry (&pTimerEntry); if (NT_SUCCESS(status)) { pTimerEntry->DeltaTime = DeltaTime; pTimerEntry->RefCount = 1; // // this is the context value and routine called when the timer expires, // called by TimerExpiry below. // pTimerEntry->Context = Context; pTimerEntry->Context2 = Context2; pTimerEntry->TimeoutRoutine = TimeoutRoutine; pTimerEntry->Flags = 0; // no flags // now fill in the client's completion routines that ultimately get called // after one or more timeouts... pTimerEntry->ClientContext = (PVOID)ContextClient; pTimerEntry->ClientCompletion = (COMPLETIONCLIENT)CompletionClient; pTimerEntry->Retries = Retries; pTimerEntry->pDeviceContext = (PVOID) pDeviceContext; CTEInitTimer(&pTimerEntry->VxdTimer); CTEStartTimer(&pTimerEntry->VxdTimer, pTimerEntry->DeltaTime, (CTEEventRtn)TimerExpiry, (PVOID)pTimerEntry); // check if there is a ptr to return if (ppTimerEntry) { *ppTimerEntry = pTimerEntry; } // put on list InsertHeadList(&TimerQ.ActiveHead, &pTimerEntry->Linkage); } else if (pDeviceContext) { NBT_DEREFERENCE_DEVICE (pDeviceContext, REF_DEV_TIMER, TRUE); } } else { status = STATUS_INVALID_DEVICE_STATE; } if (!fLocked) { CTESpinFree(&NbtConfig.JointLock,OldIrq); } return(status); } //---------------------------------------------------------------------------- NTSTATUS StopTimer( IN tTIMERQENTRY *pTimerEntry, OUT COMPLETIONCLIENT *ppClientCompletion, OUT PVOID *ppContext) /*++ Routine Description: This routine stops a timer. Must be called with the Joint lock held. Arguments: Return Value: The function value is the status of the operation. --*/ { NTSTATUS status; COMPLETIONROUTINE TimeoutRoutine; // null the client completion routine and Context so that it can't be called again // accidently if (ppClientCompletion) { *ppClientCompletion = NULL; } if (ppContext) { *ppContext = NULL; } // it is possible that the timer expiry routine has just run and the timer // has not been restarted, so check the refcount, it will be zero if the // timer was not restarted and 2 if the timer expiry is currently running. if (pTimerEntry->RefCount == 1) { // this allows the caller to call the client's completion routine with // the context value. if (ppClientCompletion) { *ppClientCompletion = pTimerEntry->ClientCompletion; } if (ppContext) { *ppContext = pTimerEntry->ClientContext; } pTimerEntry->ClientCompletion = NULL; if (!(pTimerEntry->Flags & TIMER_NOT_STARTED)) { if (!CTEStopTimer((CTETimer *)&pTimerEntry->VxdTimer )) { // // It means the TimerExpiry routine is waiting to run, // so let it return this timer block to the free Q // Bug # 229535 // // Before returning from here, we should do the cleanup since // the CompletionRoutine (if any) can result in some data // that is required for cleanup to be cleaned up (Bug # 398730) // if (TimeoutRoutine = (COMPLETIONROUTINE)pTimerEntry->TimeoutRoutine) { // call the completion routine so it can clean up its own buffers // the routine that called this one will call the client's completion // routine. A NULL timerEntry value indicates to the routine that // cleanup should be done. pTimerEntry->TimeoutRoutine = NULL; (VOID)(*TimeoutRoutine) (pTimerEntry->Context, pTimerEntry->Context2, NULL); } pTimerEntry->RefCount = 2; return (STATUS_SUCCESS); } } status = STATUS_SUCCESS; status = CleanupCTETimer(pTimerEntry); } else if (pTimerEntry->RefCount == 2) { // the timer expiry completion routines must set this routine to // null with the spin lock held to synchronize with this stop timer // routine. Likewise that routine checks this value too, to synchronize // with this routine. // if (pTimerEntry->ClientCompletion) { // this allows the caller to call the client's completion routine with // the context value. if (ppClientCompletion) { *ppClientCompletion = pTimerEntry->ClientCompletion; } if (ppContext) { *ppContext = pTimerEntry->ClientContext; } // so that the timer completion routine cannot also call the client // completion routine. pTimerEntry->ClientCompletion = NULL; } // signal the TimerExpiry routine that the timer has been cancelled // pTimerEntry->RefCount++; status = STATUS_UNSUCCESSFUL; } else { status = STATUS_UNSUCCESSFUL; } return(status); } //---------------------------------------------------------------------------- VOID TimerExpiry( #ifndef VXD IN PKDPC Dpc, IN PVOID DeferredContext, IN PVOID SystemArg1, IN PVOID SystemArg2 #else IN CTEEvent * pCTEEvent, IN PVOID DeferredContext #endif ) /*++ Routine Description: This routine is the timer expiry completion routine. It is called by the kernel when the timer expires. Arguments: Return Value: The function value is the status of the operation. --*/ { tTIMERQENTRY *pTimerEntry; CTELockHandle OldIrq1; CTESpinLock(&NbtConfig.JointLock,OldIrq1); // get the timer Q list entry from the context passed in pTimerEntry = (tTIMERQENTRY *)DeferredContext; if (pTimerEntry->RefCount == 0) { // the timer has been cancelled already! CTESpinFree(&NbtConfig.JointLock,OldIrq1); return; } else if (pTimerEntry->RefCount >= 2) // Bug #: 229535 { // the timer has been cancelled already! // Bug # 324655 // If the Timer has been cancelled, we still need to do cleanup, // so do not NULL the TimeoutRoutine! // // pTimerEntry->TimeoutRoutine = NULL; ASSERT ((pTimerEntry->RefCount == 2) || (pTimerEntry->TimeoutRoutine == NULL)); CleanupCTETimer (pTimerEntry); CTESpinFree(&NbtConfig.JointLock,OldIrq1); return; } // increment the reference count because we are handling a timer completion // now pTimerEntry->RefCount++; CTESpinFree(&NbtConfig.JointLock,OldIrq1); // call the completion routine passing the context value pTimerEntry->Flags &= ~TIMER_RESTART; // incase the clients wants to restart the timer (*(COMPLETIONROUTINE)pTimerEntry->TimeoutRoutine)( pTimerEntry->Context, pTimerEntry->Context2, pTimerEntry); CTESpinLock(&NbtConfig.JointLock,OldIrq1); pTimerEntry->RefCount--; if (pTimerEntry->Flags & TIMER_RESTART) { if (pTimerEntry->RefCount == 2) { // the timer was stopped during the expiry processing, so call the // deference routine // CleanupCTETimer(pTimerEntry); CTESpinFree(&NbtConfig.JointLock,OldIrq1); return; } else { CTEStartTimer (&pTimerEntry->VxdTimer, pTimerEntry->DeltaTime, (CTEEventRtn)TimerExpiry, (PVOID)pTimerEntry); } CTESpinFree(&NbtConfig.JointLock,OldIrq1); return; } else { // move to the free list after setting the reference count to zero // since this timer block is no longer active. // pTimerEntry->TimeoutRoutine = NULL; CleanupCTETimer (pTimerEntry); CTESpinFree(&NbtConfig.JointLock,OldIrq1); } } //---------------------------------------------------------------------------- VOID ExpireTimer( IN tTIMERQENTRY *pTimerEntry, IN CTELockHandle *OldIrq1 ) /*++ Routine Description: This routine causes the timer to be stopped (if it hasn't already) and if successful, calls the Completion routine. Arguments: Return Value: The function value is the status of the operation. --*/ { // // Reset the Number of retries // pTimerEntry->Retries = 1; // // RefCount == 0 => Timer was stopped, but not restarted // RefCount == 1 => Timer is still running * // RefCount == 2 => TimerExpiry is currently running // if ((pTimerEntry->RefCount == 1) && (!(pTimerEntry->Flags & TIMER_NOT_STARTED)) && (CTEStopTimer( (CTETimer *)&pTimerEntry->VxdTimer))) { // increment the reference count because we are handling a timer completion // now pTimerEntry->RefCount++; CTESpinFree(&NbtConfig.JointLock, *OldIrq1); // call the completion routine passing the context value pTimerEntry->Flags &= ~TIMER_RESTART; // incase the clients wants to restart the timer (*(COMPLETIONROUTINE)pTimerEntry->TimeoutRoutine) (pTimerEntry->Context, pTimerEntry->Context2, pTimerEntry); CTESpinLock(&NbtConfig.JointLock, *OldIrq1); pTimerEntry->RefCount--; if (pTimerEntry->Flags & TIMER_RESTART) { if (pTimerEntry->RefCount == 2) { // the timer was stopped during the expiry processing, so call the // deference routine // CleanupCTETimer(pTimerEntry); } else { CTEStartTimer(&pTimerEntry->VxdTimer, pTimerEntry->DeltaTime, (CTEEventRtn)TimerExpiry, (PVOID)pTimerEntry); } } else { // move to the free list after setting the reference count to zero // since this tierm block is no longer active. // pTimerEntry->TimeoutRoutine = NULL; CleanupCTETimer (pTimerEntry); } } CTESpinFree(&NbtConfig.JointLock, *OldIrq1); } //---------------------------------------------------------------------------- // // Wakeup Timer routines // //---------------------------------------------------------------------------- VOID WakeupTimerExpiry( PVOID DeferredContext, ULONG LowTime, LONG HighTime ) { BOOLEAN fAttached = FALSE; CTELockHandle OldIrq; tTIMERQENTRY *pTimerEntry = (tTIMERQENTRY *)DeferredContext; // // Call the TimerExpiry function while holding the NbtConfig.Resource // CTEExAcquireResourceExclusive (&NbtConfig.Resource,TRUE); if (pTimerEntry->RefCount > 1) { // // The timer is waiting to be cleaned up on a Worker thread, // so let it cleanup! // CTEExReleaseResource (&NbtConfig.Resource); return; } // // The Timeout routine has to ensure that it cleans up // properly since this pTimerEntry + handle will not be valid // at the end of this routine! // (*(COMPLETIONROUTINE) pTimerEntry->TimeoutRoutine) (pTimerEntry->Context, pTimerEntry->Context2, pTimerEntry); // // Close the timer handle // CTEAttachFsp(&fAttached, REF_FSP_WAKEUP_TIMER_EXPIRY); // // The Expiry routine should always be called in the context // of the system process // ASSERT (fAttached == FALSE); ZwClose (pTimerEntry->WakeupTimerHandle); CTEDetachFsp(fAttached, REF_FSP_WAKEUP_TIMER_EXPIRY); CTEExReleaseResource (&NbtConfig.Resource); ReturnTimerToFreeQ (pTimerEntry, FALSE); } //---------------------------------------------------------------------------- VOID DelayedNbtStopWakeupTimer( IN tDGRAM_SEND_TRACKING *pUnused1, IN PVOID pClientContext, IN PVOID Unused2, IN tDEVICECONTEXT *Unused3 ) /*++ Routine Description: This Routine stops a timer. This function has to be called after ensuring that the TimerExpiry has not yet cleaned up (while holding the NbtConfig.Resource) The NbtConfig.Resource has to be held while this routine is called Arguments: Timer - Timer structure Return Value: PVOID - a pointer to the memory or NULL if a failure --*/ { NTSTATUS Status; BOOLEAN CurrentState = FALSE; BOOLEAN fAttached = FALSE; tTIMERQENTRY *pTimerEntry = (tTIMERQENTRY *) pClientContext; CTEPagedCode(); ASSERT (pTimerEntry->fIsWakeupTimer); CTEAttachFsp(&fAttached, REF_FSP_STOP_WAKEUP_TIMER); Status = ZwCancelTimer (pTimerEntry->WakeupTimerHandle, &CurrentState); ZwClose (pTimerEntry->WakeupTimerHandle); CTEDetachFsp(fAttached, REF_FSP_STOP_WAKEUP_TIMER); ReturnTimerToFreeQ (pTimerEntry, FALSE); return; } //---------------------------------------------------------------------------- VOID DelayedNbtStartWakeupTimer( IN tDGRAM_SEND_TRACKING *pUnused1, IN PVOID Unused2, IN PVOID Unused3, IN tDEVICECONTEXT *Unused4 ) /*++ Routine Description: This routine starts a Wakeup timer. NbtConfig.Resource may be held on entry into this routine! Arguments: The value passed in is in milliseconds - must be converted to 100ns so multiply to 10,000 Return Value: The function value is the status of the operation. --*/ { NTSTATUS Status = STATUS_UNSUCCESSFUL; OBJECT_ATTRIBUTES ObjectAttributes; BOOLEAN fAttached = FALSE; LARGE_INTEGER Time; tTIMERQENTRY *pTimerEntry; CTELockHandle OldIrq; ULONG TimerInterval = 0; ULONG MilliSecsLeftInTtl = 0; LIST_ENTRY *pEntry; LIST_ENTRY *pHead; tDEVICECONTEXT *pDeviceContext; BOOLEAN fValidDevice = FALSE; CTEAttachFsp(&fAttached, REF_FSP_START_WAKEUP_TIMER); CTEExAcquireResourceExclusive(&NbtConfig.Resource,TRUE); CTESpinLock(&NbtConfig.JointLock,OldIrq); ASSERT (!NbtConfig.pWakeupRefreshTimer); // // Verify that at least 1 WOL-enabled device has an Ip + Wins address! // pHead = pEntry = &NbtConfig.DeviceContexts; while ((pEntry = pEntry->Flink) != pHead) { pDeviceContext = CONTAINING_RECORD (pEntry,tDEVICECONTEXT,Linkage); if ((pDeviceContext->WOLProperties & NDIS_DEVICE_WAKE_UP_ENABLE) && (pDeviceContext->IpAddress) && (pDeviceContext->lNameServerAddress != LOOP_BACK)) { fValidDevice = TRUE; break; } } if ((NbtConfig.Unloading) || // Problem!!! (!fValidDevice) || // No valid device ? !(NbtConfig.GlobalRefreshState & NBT_G_REFRESH_SLEEPING)) // check if request was cancelled! { CTESpinFree(&NbtConfig.JointLock,OldIrq); KdPrint (("Nbt.NbtStartWakeupTimer: FAIL: Either: Unloading=<%x>, fValidDevice=<%x>, RefreshState=<%x>\n", NbtConfig.Unloading, fValidDevice, NbtConfig.GlobalRefreshState)); } else if (!NT_SUCCESS (Status = GetTimerEntry (&pTimerEntry))) // get a free timer block { CTESpinFree(&NbtConfig.JointLock,OldIrq); KdPrint (("Nbt.NbtStartWakeupTimer: ERROR: GetTimerEntry returned <%x>\n", Status)); } else { pTimerEntry->RefCount = 1; pTimerEntry->TimeoutRoutine = WakeupRefreshTimeout; pTimerEntry->Context = NULL; pTimerEntry->Context2 = NULL; CTESpinFree(&NbtConfig.JointLock,OldIrq); #ifdef HDL_FIX InitializeObjectAttributes (&ObjectAttributes, NULL, OBJ_KERNEL_HANDLE, NULL, NULL); #else InitializeObjectAttributes (&ObjectAttributes, NULL, 0, NULL, NULL); #endif // HDL_FIX Status = ZwCreateTimer (&pTimerEntry->WakeupTimerHandle, TIMER_ALL_ACCESS, &ObjectAttributes, NotificationTimer); if (NT_SUCCESS (Status)) { // // Set the machine to Wakeup at 1/2 the time between now and Ttl // This should not be less than the configured MinimumRefreshSleepTimeout // (default = 6 hrs) // MilliSecsLeftInTtl = NbtConfig.MinimumTtl - (ULONG) (((ULONGLONG) NbtConfig.sTimeoutCount * NbtConfig.MinimumTtl) / NbtConfig.RefreshDivisor); if ((MilliSecsLeftInTtl/2) < NbtConfig.MinimumRefreshSleepTimeout) { TimerInterval = NbtConfig.MinimumRefreshSleepTimeout; } else { TimerInterval = MilliSecsLeftInTtl/2; } pTimerEntry->DeltaTime = TimerInterval; IF_DBG(NBT_DEBUG_PNP_POWER) KdPrint(("Nbt.DelayedNbtStartWakeupTimer: TimerInterval=<%d:%d> (h:m), Currently: <%d/%d>\n", TimerInterval/(3600000), ((TimerInterval/60000)%60), NbtConfig.sTimeoutCount, NbtConfig.RefreshDivisor)); // // convert to 100 ns units by multiplying by 10,000 // Time.QuadPart = UInt32x32To64(pTimerEntry->DeltaTime,(LONG)MILLISEC_TO_100NS); Time.QuadPart = -(Time.QuadPart); // to make a delta time, negate the time pTimerEntry->fIsWakeupTimer = TRUE; ASSERT(Time.QuadPart < 0); Status = ZwSetTimer(pTimerEntry->WakeupTimerHandle, &Time, (PTIMER_APC_ROUTINE) WakeupTimerExpiry, pTimerEntry, TRUE, 0, NULL); if (!NT_SUCCESS (Status)) { KdPrint (("Nbt.NbtStartWakeupTimer: ERROR: ZwSetTimer returned <%x>, TimerHandle=<%x>\n", Status, pTimerEntry->WakeupTimerHandle)); ZwClose (pTimerEntry->WakeupTimerHandle); } } else { KdPrint (("Nbt.NbtStartWakeupTimer: ERROR: ZwCreateTimer returned <%x>\n", Status)); } if (NT_SUCCESS (Status)) { NbtConfig.pWakeupRefreshTimer = pTimerEntry; } else { ReturnTimerToFreeQ (pTimerEntry, FALSE); } } CTEExReleaseResource(&NbtConfig.Resource); CTEDetachFsp(fAttached, REF_FSP_START_WAKEUP_TIMER); KeSetEvent (&NbtConfig.WakeupTimerStartedEvent, 0, FALSE); return; }