IPX DEFINITIONS ::= BEGIN

-- This MIB defines the management information for a system using the IPX
-- protocol.  The MIB consists of four groups:
--
--    1.  System Group - contains general information about all instances
--                       of IPX on the system
--
--    2.  Circuit Group - contains information about all circuits used by
--                        IPX on the system
--
--    3.  Forwarding Group - contains generic routing information that
--                           must be provided by any IPX routing protocol.
--
--    4.  Services Group - contains information about all known services.
--
-- The MIB is designed to support multiple instances of the IPX
-- protocol on one system via a system instance identifier which is the
-- primary index for every table in this MIB.
--
-- This MIB is designed to provide a basic framework for the management
-- of systems implementing the IPX protocol.  Additional MIBs may be
-- created (especially in the area of IPX routing protocols) to contain
-- more specific information.  Whenever possible, these additional MIBs
-- should follow the format of this IPX MIB.  Information in these MIBs
-- should be linked to this MIB via the use of the system instance 
-- identifier mentioned above.
--
--
-- Changes:
--
--    4/15/94:  Cleanup of some typographical errors
--
--    4/21/94:  Change ipxCircNetNumber acces to read-write
--
-- Limitations in NT Router implementation
--	ipxBasicSysEntry:
--		ipxBasicSysInstance		- always 0 (only one instance of IPX can run)
--		ipxBasicSysExistSate	- always ON (deletions or additions of system
--									instances are no supported)
--		ipxBasicSysInReceives	- always 0 (system-wide statistics are not kept)
--		ipxBasicSysInHdrErrors	- always 0 (system-wide statistics are not kept)
--		ipxBasicSysUnknownSockets - always 0 (system-wide statistics are not kept)
--		ipxBasicSysInDiscards	- always 0 (system-wide statistics are not kept)
--		ipxBasicSysInBadChecksums - always 0 (system-wide statistics are not kept)
--		ipxBasicSysInDelivers	- always 0 (system-wide statistics are not kept)
--		ipxBasicSysNoRoutes		- always 0 (system-wide statistics are not kept)
--		ipxBasicSysOutRequests	- always 0 (system-wide statistics are not kept)
--		ipxBasicSysOutMalformedRequests - always 0 (not supported)
--		ipxBasicSysOpenSocketFails - always 0 (not supported)
--	ipxAdvSysEntry:
--		ipxAdvSysInstance		- always 0 (only one instance of IPX can run)
--		ipxAdvSysMaxPathSplits	- supported as read-only
--		ipxAdvSysMaxHops		- supported as read-only
--		ipxAdvSysInTooManyHops	- always 0 (not supported)
--		ipxAdvSysInFiltered		- always 0 (system-wide statistics are not kept)
--		ipxAdvSysInCompressDiscards - always 0 (not supported)
--		ipxAdvSysNETBIOSPackets	- always 0 (system-wide statistics are not kept)
--		ipxAdvSysForwPackets	- always 0 (system-wide statistics are not kept)
--		ipxAdvSysOutFiltered	- always 0 (system-wide statistics are not kept)
--		ipxAdvSysOutComplressDiscards - always 0 (not supported)
--		ipxAdvSysCircCount		- count of interfaces with IPX routing installed
--	ipxCircEntry:
--		ipxCircSysInstance		- always 0 (only one instance of IPX can run)
--		ipxCircExistState		- always ON (deletions or additions of circuits
--									are no supported)
--		ipxCircIfIndex			- this index does not neccessarily correspond
--									to interface indeces in interface table
--									(mib-2.2)
--		ipxCircName				- supported as read-only
--		ipxCircType				- supported as read-only
--		ipxCircLocalMaxPacketSize - supported as read-only
--		ipxCircStaticStatus		- supported as read-only
--		ipxCircStateChanges		- always 0 (not supported)
--		ipxCircInitFails		- always 0 (not supported)
--		ipxCircNeighInternalNetNum - always 0 (not supported)
--	ipxDestEntry:
--		ipxDestSysInstance		- always 0 (only one instance of IPX can run)
--		ipxDestNextHopNetNum	- always zero (not supported)
--	ipxStaticRouteEntry:
--		ipxStaticRouteSysInstance - always 0 (only one instance of IPX can run)
--	ipxServEntry:
--		ipxServSysInstance		- always 0 (only one instance of IPX can run)
--	ipxDestServEntry:			- not supported, always empty
--	ipxStaticServEntry:
--		ipxStaticServSysInstance - always 0 (only one instance of IPX can run)
--

IMPORTS
        enterprises, Counter
                FROM RFC1155-SMI
        OBJECT-TYPE
                FROM RFC-1212;
--      TRAP-TYPE
--              FROM RFC-1215
--      PhysAddress
--              FROM RFC1213-MIB;

novell			OBJECT IDENTIFIER ::= { enterprises 23 }
mibDoc			OBJECT IDENTIFIER ::= { novell 2 }
ipx				OBJECT IDENTIFIER ::= { mibDoc 5 }


-- Groups

ipxSystem		OBJECT IDENTIFIER ::= {ipx 1}
ipxCircuit		OBJECT IDENTIFIER ::= {ipx 2}
ipxForwarding	OBJECT IDENTIFIER ::= {ipx 3}
ipxServices		OBJECT IDENTIFIER ::= {ipx 4}
ipxTraps		OBJECT IDENTIFIER ::= {ipx 5}

-- Types

NetNumber		::= OCTET STRING (SIZE(4))
PhysAddress		::= OCTET STRING (SIZE(6))

-- System Group
--   This group contains global information about each instance of IPX
--   running on one system.

-- Basic System Table
--   This table contains one entry for each instance of IPX running on
--   the system.  It contains the management information that should
--   be made available by all implementations of the IPX protocol.

ipxBasicSysTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXBasicSysEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The IPX System table - basic information."
	::= {ipxSystem 1}

ipxBasicSysEntry OBJECT-TYPE
	SYNTAX		IPXBasicSysEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one instance of IPX running
				on the system."
	INDEX		{ipxBasicSysInstance}
	::= {ipxBasicSysTable 1}

IPXBasicSysEntry	::= SEQUENCE {
						ipxBasicSysInstance						INTEGER,
						ipxBasicSysExistState					INTEGER,
						ipxBasicSysNetNumber					NetNumber,
						ipxBasicSysNode							OCTET STRING,
						ipxBasicSysName							OCTET STRING,
						ipxBasicSysInReceives					Counter,
						ipxBasicSysInHdrErrors					Counter,
						ipxBasicSysInUnknownSockets				Counter,
						ipxBasicSysInDiscards					Counter,
						ipxBasicSysInBadChecksums				Counter,
						ipxBasicSysInDelivers					Counter,
						ipxBasicSysNoRoutes						Counter,
						ipxBasicSysOutRequests					Counter,
						ipxBasicSysOutMalformedRequests			Counter,
						ipxBasicSysOutDiscards					Counter,
						ipxBasicSysOutPackets					Counter,
						ipxBasicSysConfigSockets				INTEGER,
						ipxBasicSysOpenSocketFails				Counter
						}
                           
ipxBasicSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX to which this
				row corresponds.  This value may be written only when
				creating a new entry in the table."
	::= {ipxBasicSysEntry 1}

ipxBasicSysExistState OBJECT-TYPE
	SYNTAX		INTEGER {
						off(1),
						on(2)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION "The validity of this entry in the IPX system table.
				Setting this field to off indicates that this entry may be
				deleted from the system table at the IPX implementation's
				discretion."
	::= {ipxBasicSysEntry 2}

ipxBasicSysNetNumber OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The network number portion of the IPX address of this
				system."
	::= {ipxBasicSysEntry 3}

ipxBasicSysNode	OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(6))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION "The node number portion of the IPX address of this
				system."
	::= {ipxBasicSysEntry 4}

ipxBasicSysName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..48))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION "The readable name for this system."
	::= {ipxBasicSysEntry 5}

ipxBasicSysInReceives OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The total number of IPX packets received, including
				those received in error."
	::= {ipxBasicSysEntry 6}

ipxBasicSysInHdrErrors OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of IPX packets discarded due to errors in
				their headers, including any IPX packet with a size less
				than the minimum of 30 bytes."
	::= {ipxBasicSysEntry 7}

ipxBasicSysInUnknownSockets OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of IPX packets discarded because the
				destination socket was not open."
	::= {ipxBasicSysEntry 8}

ipxBasicSysInDiscards OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of IPX packets received but discarded due to
				reasons other than those accounted for by 
				ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets,
				ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards."
	::= {ipxBasicSysEntry 9}

ipxBasicSysInBadChecksums OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of IPX packets received with incorrect
				checksums."
	::= {ipxBasicSysEntry 10}

ipxBasicSysInDelivers OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The total number of IPX packets delivered locally,
				including packets from local applications."
	::= {ipxBasicSysEntry 11}

ipxBasicSysNoRoutes OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of times no route to a destination was
				found."
	::= {ipxBasicSysEntry 12}

ipxBasicSysOutRequests OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of IPX packets supplied locally for
				transmission, not including any packets counted in
				ipxAdvForwPackets."
	::= {ipxBasicSysEntry 13}

ipxBasicSysOutMalformedRequests OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of IPX packets supplied locally that contained
				errors in their structure."
	::= {ipxBasicSysEntry 14}

ipxBasicSysOutDiscards OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of outgoing IPX packets discarded due to
				reasons other than those accounted for in
				ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered,
				and ipxAdvSysOutCompressDiscards."
	::= {ipxBasicSysEntry 15}

ipxBasicSysOutPackets OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The total number of IPX packets transmitted."
	::= {ipxBasicSysEntry 16}

ipxBasicSysConfigSockets OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The configured maximum number of IPX sockets that may be
				open at one time."
	::= {ipxBasicSysEntry 17}

ipxBasicSysOpenSocketFails OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The number of IPX socket open calls which failed."
	::= {ipxBasicSysEntry 18}


-- Advanced System Table
--   This table contains one entry for each instance of IPX running on
--   the system.  It contains the advanced management information that
--   may not be available from all implementations of the IPX protocol.

ipxAdvSysTable OBJECT-TYPE
   SYNTAX      SEQUENCE OF IPXAdvSysEntry
   ACCESS      not-accessible
   STATUS      mandatory
   DESCRIPTION "The IPX System table - advanced information."
   ::= {ipxSystem 2}

ipxAdvSysEntry OBJECT-TYPE
   SYNTAX      IPXAdvSysEntry
   ACCESS      not-accessible
   STATUS      mandatory
   DESCRIPTION "Each entry corresponds to one instance of IPX running
                on the system."
   INDEX       {ipxAdvSysInstance}
   ::= {ipxAdvSysTable 1}

IPXAdvSysEntry	::= SEQUENCE {
						ipxAdvSysInstance					INTEGER,
						ipxAdvSysMaxPathSplits				INTEGER,
						ipxAdvSysMaxHops					INTEGER,
						ipxAdvSysInTooManyHops				Counter,
						ipxAdvSysInFiltered					Counter,
						ipxAdvSysInCompressDiscards			Counter,
						ipxAdvSysNETBIOSPackets				Counter,
						ipxAdvSysForwPackets				Counter,
						ipxAdvSysOutFiltered				Counter,
						ipxAdvSysOutCompressDiscards		Counter,
						ipxAdvSysCircCount					INTEGER,
						ipxAdvSysDestCount					INTEGER,
						ipxAdvSysServCount					INTEGER
						}

ipxAdvSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX to which this
				row corresponds.  This value may be written only when
                creating a new entry in the table."
	::= {ipxAdvSysEntry 1}

ipxAdvSysMaxPathSplits OBJECT-TYPE
	SYNTAX		INTEGER (1..32)
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION "The maximum number of paths with equal routing metric
				value which this instance of the IPX may split
				between when forwarding packets."
	DEFVAL		{ 1 }
	::= {ipxAdvSysEntry 2}

ipxAdvSysMaxHops OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The maximum number of hops a packet may take."
	DEFVAL		{ 64 }
	::= {ipxAdvSysEntry 3}

ipxAdvSysInTooManyHops OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of IPX packets discarded due to exceeding the
				maximum hop count."
	::= {ipxAdvSysEntry 4}

ipxAdvSysInFiltered OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of incoming IPX packets discarded due to
				filtering."
	::= {ipxAdvSysEntry 5}

ipxAdvSysInCompressDiscards OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of incoming IPX packets discarded due to
				decompression errors."
	::= {ipxAdvSysEntry 6}

ipxAdvSysNETBIOSPackets OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of NETBIOS packets received."
	::= {ipxAdvSysEntry 7}

ipxAdvSysForwPackets OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of IPX packets forwarded."
	::= {ipxAdvSysEntry 8}

ipxAdvSysOutFiltered OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of outgoing IPX packets discarded due to
				filtering."
	::= {ipxAdvSysEntry 9}

ipxAdvSysOutCompressDiscards OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of outgoing IPX packets discarded due to
				compression errors."
	::= {ipxAdvSysEntry 10}

ipxAdvSysCircCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of circuits known to this instance of IPX."
	::= {ipxAdvSysEntry 11}

ipxAdvSysDestCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of currently reachable destinations known to
				this instance of IPX."
	::= {ipxAdvSysEntry 12}

ipxAdvSysServCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of services known to this instance of IPX."
	::= {ipxAdvSysEntry 13}


-- Circuit Group
--   This group contains management information for each circuit known
--   to this system.

-- Circuit Table
--   The Circuit table contains an entry for each circuit known to the
--   system.

ipxCircTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXCircEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The Circuit table."
	::= {ipxCircuit 1}

ipxCircEntry OBJECT-TYPE
	SYNTAX		IPXCircEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one circuit known to the
				system."
	INDEX		{
                ipxCircSysInstance,
                ipxCircIndex
				}
	::= {ipxCircTable 1}

IPXCircEntry	::= SEQUENCE {
					ipxCircSysInstance					INTEGER,
					ipxCircIndex						INTEGER,
					ipxCircExistState					INTEGER,
					ipxCircOperState					INTEGER,
					ipxCircIfIndex						INTEGER,
					ipxCircName							OCTET STRING,
					ipxCircType							INTEGER,
					ipxCircDialName						OCTET STRING,
					ipxCircLocalMaxPacketSize			INTEGER,
					ipxCircCompressState				INTEGER,
					ipxCircCompressSlots				INTEGER,
					ipxCircStaticStatus					INTEGER,
					ipxCircCompressedSent				Counter,
					ipxCircCompressedInitSent			Counter,
					ipxCircCompressedRejectsSent		Counter,
					ipxCircUncompressedSent				Counter,
					ipxCircCompressedReceived			Counter,
					ipxCircCompressedInitReceived		Counter,
					ipxCircCompressedRejectsReceived	Counter,
					ipxCircUncompressedReceived			Counter,
					ipxCircMediaType					OCTET STRING,
					ipxCircNetNumber					NetNumber,
					ipxCircStateChanges					Counter,
					ipxCircInitFails					Counter,
					ipxCircDelay						INTEGER,
					ipxCircThroughput					INTEGER,
					ipxCircNeighRouterName				OCTET STRING,
					ipxCircNeighInternalNetNum			NetNumber
					}

ipxCircSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX
				to which this entry corresponds.  This value may be 
				written only when creating a new entry in the table."
	::= {ipxCircEntry 1}

ipxCircIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The identifier of this circuit, unique within the
				instance of IPX.  This value may be written
				only when creating a new entry in the table."
	::= {ipxCircEntry 2}

ipxCircExistState OBJECT-TYPE
	SYNTAX		INTEGER {
						off(1),
						on(2)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The validity of this circuit entry.  A circuit with this
				value set to off may be deleted from the table at the
				IPX implementation's discretion."
	::= {ipxCircEntry 3}

ipxCircOperState OBJECT-TYPE
	SYNTAX		INTEGER {
						down(1),
						up(2),
						sleeping(3)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The operational state of the circuit."
	::= {ipxCircEntry 4}

ipxCircIfIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The value of ifIndex for the interface used by this
				circuit.  This value may be written only when creating
				a new entry in the table."
	::= {ipxCircEntry 5}

ipxCircName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..48))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The readable name for the circuit."
	::= {ipxCircEntry 6}

ipxCircType OBJECT-TYPE
	SYNTAX		INTEGER {
						other(1),
						broadcast(2),
						ptToPt(3),
						wanRIP(4),
						unnumberedRIP(5),
						dynamic(6),
						wanWS(7)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The type of the circuit."
	::= {ipxCircEntry 7}

ipxCircDialName OBJECT-TYPE
 	SYNTAX		OCTET STRING (SIZE(0..48))
 	ACCESS		read-write
 	STATUS		mandatory
 	DESCRIPTION	"The symbolic name used to refernce the dialing information
				used to create this circuit.  This value may be written 
				only when creating a new entry in the table."
	::= {ipxCircEntry 8}

ipxCircLocalMaxPacketSize OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The maximum size (including header), in bytes, that the
				system supports locally on this circuit."
	::= {ipxCircEntry 9}

ipxCircCompressState OBJECT-TYPE
	SYNTAX		INTEGER {
						off(1),
						on(2)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The compression state on this circuit.  This value may 
				be written only when creating a new entry in the table."
	DEFVAL		{ off }
	::= {ipxCircEntry 10}

ipxCircCompressSlots OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The number of compression slots available on this 
				circuit.  This value may be written only when creating a
				new entry in the table."
	DEFVAL		{ 16 }
	::= {ipxCircEntry 11}

ipxCircStaticStatus OBJECT-TYPE
	SYNTAX		INTEGER {
						unknown(1),
						current(2),
						changed(3),
						read(4),
						reading(5),
						write(6),
						writing(7)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Indicates whether the information about static routes
				and services reached via this circuit matches that
				saved in permanent storage (current).  Setting the
				value to write when it had the value changed will write
				the currently in use information to permanent storage, 
				if supported.  Setting the value to read when it had
				the value changed will replace any routes and services
				currently defined for the circuit with those read from
				permanent storage, if supported."
	::= {ipxCircEntry 12}

ipxCircCompressedSent OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of compressed packets sent."
	::= {ipxCircEntry 13}

ipxCircCompressedInitSent OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of compression initialization packets sent."
	::= {ipxCircEntry 14}

ipxCircCompressedRejectsSent OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of compressed packet rejected packets sent."
	::= {ipxCircEntry 15}

ipxCircUncompressedSent OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of packets sent without being compressed
				even though compression was turned on for this circuit."
	::= {ipxCircEntry 16}

ipxCircCompressedReceived OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of compressed packets received."
	::= {ipxCircEntry 17}

ipxCircCompressedInitReceived OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of compression initialization packets received."
	::= {ipxCircEntry 18}

ipxCircCompressedRejectsReceived OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of compressed packet rejected packets received."
	::= {ipxCircEntry 19}

ipxCircUncompressedReceived OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of packets received without having been
				compressed even though compression was turned on for
				this circuit."
	::= {ipxCircEntry 20}

ipxCircMediaType OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The media type used on this circuit."
	::= {ipxCircEntry 21}

ipxCircNetNumber OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The IPX network number of this circuit.  This value may
				be written only when creating a new entry in the table."
	::= {ipxCircEntry 22}

ipxCircStateChanges OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of times the circuit has changed state."
	::= {ipxCircEntry 23}

ipxCircInitFails OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of times that initialization of this
				circuit has failed."
	::= {ipxCircEntry 24}

ipxCircDelay OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The period of time, in milliseconds, that it takes to
				transmit one byte of data, excluding protocol headers,
				to a destination on the other end of the circuit, if 
				the circuit is free of other traffic."
	::= {ipxCircEntry 25}

ipxCircThroughput OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The amount of data, in bits per second, that may flow
				through the circuit if there is no other traffic."
	::= {ipxCircEntry 26}

ipxCircNeighRouterName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The name of the neighboring router on a WAN circuit."
	::= {ipxCircEntry 27}

ipxCircNeighInternalNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The internal network number of the neighboring router
				on a WAN circuit."
	::= {ipxCircEntry 28}


-- Forwarding Group
--   This group provides a representation of the forwarding database used
--   by all instances of IPX on the system.

-- Destination Table
--   The Destination table contains information about all known
--   destinations.  The routing information shown in this table represents
--   the path currently being used to reach the destination.

ipxDestTable OBJECT-TYPE
	SYNTAX      SEQUENCE OF IPXDestEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION "The Destination table contains information about all
				known destinations."
	::= {ipxForwarding 1}

ipxDestEntry OBJECT-TYPE
	SYNTAX		IPXDestEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one destination."
	INDEX		{
				ipxDestSysInstance,
				ipxDestNetNum
				}
	::= {ipxDestTable 1}

IPXDestEntry	::= SEQUENCE {
					ipxDestSysInstance					INTEGER,
					ipxDestNetNum						NetNumber,
					ipxDestProtocol						INTEGER,
					ipxDestTicks						INTEGER,
					ipxDestHopCount						INTEGER,
					ipxDestNextHopCircIndex				INTEGER,
					ipxDestNextHopNICAddress			PhysAddress,
					ipxDestNextHopNetNum				NetNumber
					}

ipxDestSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX
				to which this row corresponds."
	::= {ipxDestEntry 1}

ipxDestNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number of the destination."
	::= {ipxDestEntry 2}

ipxDestProtocol OBJECT-TYPE
	SYNTAX		INTEGER {
						other(1),
						local(2),
						rip(3),
						nlsp(4),
						static(5)
						}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The routing protocol from which knowledge of this
				destination was obtained."
	::= {ipxDestEntry 3}

ipxDestTicks OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The delay in ticks to reach this destination."
	::= {ipxDestEntry 4}

ipxDestHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of hops necessary to reach the destination."
	::= {ipxDestEntry 5}

ipxDestNextHopCircIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the circuit used to reach the 
				next hop."
	::= {ipxDestEntry 6}

ipxDestNextHopNICAddress OBJECT-TYPE
	SYNTAX		PhysAddress
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The NIC address of the next hop."
	::= {ipxDestEntry 7}

ipxDestNextHopNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number of the next hop."
	::= {ipxDestEntry 8}


-- Static Routes Table
--   This table contains the information about all the static routes
--   defined.  There may be more than one static route to any given
--   destination.  Only the route currently being used will also be
--   present in the Destination Table defined above.

ipxStaticRouteTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXStaticRouteEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The Static Routes table contains information about all
				destinations reached via statically configured routes."
	::= {ipxForwarding 2}

ipxStaticRouteEntry OBJECT-TYPE
	SYNTAX		IPXStaticRouteEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one static route."
	INDEX		{
				ipxStaticRouteSysInstance,
				ipxStaticRouteCircIndex,
				ipxStaticRouteNetNum
				}
	::= {ipxStaticRouteTable 1}

IPXStaticRouteEntry	::= SEQUENCE {
						ipxStaticRouteSysInstance					INTEGER,
						ipxStaticRouteCircIndex						INTEGER,
						ipxStaticRouteNetNum						NetNumber,
						ipxStaticRouteExistState					INTEGER,
						ipxStaticRouteTicks							INTEGER,
						ipxStaticRouteHopCount						INTEGER
						}

ipxStaticRouteSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX to
				which this row corresponds."
	::= {ipxStaticRouteEntry 1}

ipxStaticRouteCircIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the circuit used to
				reach the first hop in the static route."
	::= {ipxStaticRouteEntry 2}

ipxStaticRouteNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The IPX network number of the route's destination."
	::= {ipxStaticRouteEntry 3}

ipxStaticRouteExistState OBJECT-TYPE
	SYNTAX		INTEGER {
						off(1),
						on(2)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION "The validity of this static route.  Entries with the
				value set to off may be deleted from the table at the
				implementation's discretion."
	::= {ipxStaticRouteEntry 4}

ipxStaticRouteTicks OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The delay, in ticks, to reach the route's destination."
	::= {ipxStaticRouteEntry 5}

ipxStaticRouteHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The number of hops necessary to reach the destination."
	::= {ipxStaticRouteEntry 6}


-- Services Group
--   The Services group contains management information for all known
--   services.

-- Services Table
--    This table contains the services information indexed by service
--    name and type.

ipxServTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The table of services, indexed by name and type."
	::= {ipxServices 1}

ipxServEntry OBJECT-TYPE
	SYNTAX		IPXServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one service."
	INDEX		{
				ipxServSysInstance,
				ipxServType,
				ipxServName
				}
	::= {ipxServTable 1}

IPXServEntry	::= SEQUENCE {
					ipxServSysInstance					INTEGER,
					ipxServType							OCTET STRING,
					ipxServName							OCTET STRING,
					ipxServProtocol						INTEGER,
					ipxServNetNum						NetNumber,
					ipxServNode							OCTET STRING,
					ipxServSocket						OCTET STRING,
					ipxServHopCount						INTEGER
					}

ipxServSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX
				to which this entry corresponds."
	::= {ipxServEntry 1}

ipxServType OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service type."
	::= {ipxServEntry 2}

ipxServName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(1..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service name."
	::= {ipxServEntry 3}

ipxServProtocol OBJECT-TYPE
	SYNTAX		INTEGER {
						other(1),
						local(2),
						nlsp(4),
						static(5),
						sap(6)
						}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The protocol from which knowledge of this service was
				obtained."
	::= {ipxServEntry 4}

ipxServNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number portion of the IPX address of the
				service."
	::= {ipxServEntry 5}

ipxServNode OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(6))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The node portion of the IPX address of the service."
	::= {ipxServEntry 6}

ipxServSocket OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The socket portion of the IPX address of the service."
	::= {ipxServEntry 7}

ipxServHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of hops to the service."
	::= {ipxServEntry 8}


-- Destination Services Table
--   This table contains the services information indexed by address, 
--   name, and type.

ipxDestServTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXDestServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The table of services, indexed by address, name,
				and type."
	::= {ipxServices 2}

ipxDestServEntry OBJECT-TYPE
	SYNTAX		IPXDestServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one service."
	INDEX		{
				ipxDestServSysInstance,
				ipxDestServNetNum,
				ipxDestServNode,
				ipxDestServSocket,
				ipxDestServName,
				ipxDestServType
				}
	::= {ipxDestServTable 1}

IPXDestServEntry	::= SEQUENCE {
						ipxDestServSysInstance					INTEGER,
						ipxDestServNetNum						NetNumber,
						ipxDestServNode							OCTET STRING,
						ipxDestServSocket						OCTET STRING,
						ipxDestServName							OCTET STRING,
						ipxDestServType							OCTET STRING,
						ipxDestServProtocol						INTEGER,
						ipxDestServHopCount						INTEGER
						}

ipxDestServSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the instance of IPX
				to which this entry corresponds."
	::= {ipxDestServEntry 1}

ipxDestServNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number portion of the IPX address of the
				service."
	::= {ipxDestServEntry 2}

ipxDestServNode OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(6))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The node portion of the IPX address of the service."
	::= {ipxDestServEntry 3}

ipxDestServSocket OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The socket portion of the IPX address of the service."
	::= {ipxDestServEntry 4}

ipxDestServName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(1..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service name."
	::= {ipxDestServEntry 5}

ipxDestServType OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service type."
	::= {ipxDestServEntry 6}

ipxDestServProtocol OBJECT-TYPE
	SYNTAX		INTEGER {
						other(1),
						local(2),
						nlsp(4),
						static(5),
						sap(6)
						}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The protocol from which knowledge of this service was
				obtained."
	::= {ipxDestServEntry 7}

ipxDestServHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of hops to the service."
	::= {ipxDestServEntry 8}


-- Static Services Table
--   This table contains information for all services reached via a
--   static route.

ipxStaticServTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXStaticServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The Static Services table contains information about
				all services reached via statically configured routes."
	::= {ipxServices 3}

ipxStaticServEntry OBJECT-TYPE
	SYNTAX		IPXStaticServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one service."
	INDEX       {
				ipxStaticServSysInstance,
				ipxStaticServCircIndex,
				ipxStaticServName,
				ipxStaticServType
				}
	::= {ipxStaticServTable 1}

IPXStaticServEntry	::= SEQUENCE {
						ipxStaticServSysInstance				INTEGER,
						ipxStaticServCircIndex					INTEGER,
						ipxStaticServName						OCTET STRING,
						ipxStaticServType						OCTET STRING,
						ipxStaticServExistState					INTEGER,
						ipxStaticServNetNum						NetNumber,
						ipxStaticServNode						OCTET STRING,
						ipxStaticServSocket						OCTET STRING,
						ipxStaticServHopCount					INTEGER
						}

ipxStaticServSysInstance OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION "The unique identifier of the instance of IPX to which
				this entry corresponds."
	::= {ipxStaticServEntry 1}

ipxStaticServCircIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The circuit used to reach this service."
	::= {ipxStaticServEntry 2}

ipxStaticServName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(1..48))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The service name."
	::= {ipxStaticServEntry 3}

ipxStaticServType OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The service type."
	::= {ipxStaticServEntry 4}

ipxStaticServExistState OBJECT-TYPE
	SYNTAX		INTEGER {
						off(1),
						on(2)
						}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The validity of this static service.  Entries with the
				value set to off may be deleted from the table at the
				implementation's discretion."
	::= {ipxStaticServEntry 5}

ipxStaticServNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The IPX network number portion of the IPX address of the
				service."
	::= {ipxStaticServEntry 6}

ipxStaticServNode OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(6))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The node portion of the IPX address of the service."
	::= {ipxStaticServEntry 7}

ipxStaticServSocket OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The socket portion of the IPX address of the service."
	::= {ipxStaticServEntry 8}

ipxStaticServHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The number of hops to the service."
	::= {ipxStaticServEntry 9}


-- Traps
--   The section describes the traps defined for IPX.

ipxTrapCircuitDown TRAP-TYPE
	ENTERPRISE	ipxTraps
	VARIABLES	{
				ipxCircSysInstance,
				ipxCircIndex
				}
	DESCRIPTION	"This trap signifies that the specified circuit has
				gone down."
	::= 1

ipxTrapCircuitUp TRAP-TYPE
	ENTERPRISE	ipxTraps
	VARIABLES	{
				ipxCircSysInstance,
				ipxCircIndex
				}
	DESCRIPTION	"This trap signifies that the specified circuit has
				come up."
	::= 2

END