/*++
Copyright (c) Microsoft Corporation. All rights reserved.
Module Name:
mprerror.h
Abstract:
Router specific error codes
--*/
//
// Don't change the comments following the manifest constants without
// understanding how mapmsg works.
//
#ifndef _MPRERROR_H_
#define _MPRERROR_H_
#if _MSC_VER > 1000
#pragma once
#endif
#define ROUTEBASE 900
#define SUCCESS 0
#define ERROR_ROUTER_STOPPED (ROUTEBASE+0)
/*
* The router is not running.%0
*/
#define ERROR_ALREADY_CONNECTED (ROUTEBASE+1)
/*
* The interface is already connected.%0
*/
#define ERROR_UNKNOWN_PROTOCOL_ID (ROUTEBASE+2)
/*
* The specified protocol identifier is not known to the router.%0
*/
#define ERROR_DDM_NOT_RUNNING (ROUTEBASE+3)
/*
* The Demand-dial Interface Manager is not running.%0
*/
#define ERROR_INTERFACE_ALREADY_EXISTS (ROUTEBASE+4)
/*
* An interface with this name is already registered with the router.%0
*/
#define ERROR_NO_SUCH_INTERFACE (ROUTEBASE+5)
/*
* An interface with this name is not registered with the router.%0
*/
#define ERROR_INTERFACE_NOT_CONNECTED (ROUTEBASE+6)
/*
* The interface is not connected.%0
*/
#define ERROR_PROTOCOL_STOP_PENDING (ROUTEBASE+7)
/*
* The specified protocol is stopping.%0
*/
#define ERROR_INTERFACE_CONNECTED (ROUTEBASE+8)
/*
* The interface is connected and hence cannot be deleted.%0
*/
#define ERROR_NO_INTERFACE_CREDENTIALS_SET (ROUTEBASE+9)
/*
* The interface credentials have not been set.%0
*/
#define ERROR_ALREADY_CONNECTING (ROUTEBASE+10)
/*
* This interface is already in the process of connecting.%0
*/
#define ERROR_UPDATE_IN_PROGRESS (ROUTEBASE+11)
/*
* An update of routing information on this interface is already in progress.%0
*/
#define ERROR_INTERFACE_CONFIGURATION (ROUTEBASE+12)
/*
* The interface confugration in invalid. There is already another interface that is connected to the same inteface on the remote router.%0
*/
#define ERROR_NOT_CLIENT_PORT (ROUTEBASE+13)
/*
* A Remote Access Client attempted to connect over a port that was reserved for Routers only.%0
*/
#define ERROR_NOT_ROUTER_PORT (ROUTEBASE+14)
/*
* A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.%0
*/
#define ERROR_CLIENT_INTERFACE_ALREADY_EXISTS (ROUTEBASE+15)
/*
* The client interface with this name already exists and is currently connected.%0
*/
#define ERROR_INTERFACE_DISABLED (ROUTEBASE+16)
/*
* The interface is in a disabled state.%0
*/
#define ERROR_AUTH_PROTOCOL_REJECTED (ROUTEBASE+17)
/*
* The authentication protocol was rejected by the remote peer.%0
*/
#define ERROR_NO_AUTH_PROTOCOL_AVAILABLE (ROUTEBASE+18)
/*
* There are no authentication protocols available for use.%0
*/
#define ERROR_PEER_REFUSED_AUTH (ROUTEBASE+19)
/*
* The remote computer refused to be authenticated using the configured authentication protocol. The line has been disconnected.%0
*/
#define ERROR_REMOTE_NO_DIALIN_PERMISSION (ROUTEBASE+20)
/*
* The remote account does not have Remote Access permission.%0
*/
#define ERROR_REMOTE_PASSWD_EXPIRED (ROUTEBASE+21)
/*
* The remote account has expired.%0
*/
#define ERROR_REMOTE_ACCT_DISABLED (ROUTEBASE+22)
/*
* The remote account is disabled.%0
*/
#define ERROR_REMOTE_RESTRICTED_LOGON_HOURS (ROUTEBASE+23)
/*
* The remote account is not permitted to logon at this time of day.%0
*/
#define ERROR_REMOTE_AUTHENTICATION_FAILURE (ROUTEBASE+24)
/*
* Access was denied to the remote peer because username and/or password is invalid on the domain.%0
*/
#define ERROR_INTERFACE_HAS_NO_DEVICES (ROUTEBASE+25)
/*
* There are no routing enabled ports available for use by this demand dial interface.%0
*/
#define ERROR_IDLE_DISCONNECTED (ROUTEBASE+26)
/*
* The port has been disconnected due to inactivity.%0
*/
#define ERROR_INTERFACE_UNREACHABLE (ROUTEBASE+27)
/*
* The interface is not reachable at this time.%0
*/
#define ERROR_SERVICE_IS_PAUSED (ROUTEBASE+28)
/*
* The Demand Dial service is in a paused state.%0
*/
#define ERROR_INTERFACE_DISCONNECTED (ROUTEBASE+29)
/*
* The interface has been disconnected by the administrator.%0
*/
#define ERROR_AUTH_SERVER_TIMEOUT (ROUTEBASE+30)
/*
* The authentication server did not respond to authentication requests in a timely fashion.%0
*/
#define ERROR_PORT_LIMIT_REACHED (ROUTEBASE+31)
/*
* The maximum number of ports allowed for use in the multilinked connection has been reached.%0
*/
#define ERROR_PPP_SESSION_TIMEOUT (ROUTEBASE+32)
/*
* The connection time limit for the user has been reached.%0
*/
#define ERROR_MAX_LAN_INTERFACE_LIMIT (ROUTEBASE+33)
/*
* The maximum limit on the number of LAN interfaces supported has been reached.%0
*/
#define ERROR_MAX_WAN_INTERFACE_LIMIT (ROUTEBASE+34)
/*
* The maximum limit on the number of Demand Dial interfaces supported has been reached.%0
*/
#define ERROR_MAX_CLIENT_INTERFACE_LIMIT (ROUTEBASE+35)
/*
* The maximum limit on the number of Remote Access clients supported has been reached.%0
*/
#define ERROR_BAP_DISCONNECTED (ROUTEBASE+36)
/*
* The port has been disconnected due to the BAP policy.%0
*/
#define ERROR_USER_LIMIT (ROUTEBASE+37)
/*
* Because another connection of your type is in use, the incoming connection cannot accept your connection request.%0
*/
#define ERROR_NO_RADIUS_SERVERS (ROUTEBASE+38)
/*
* No RADIUS servers were located on the network.%0
*/
#define ERROR_INVALID_RADIUS_RESPONSE (ROUTEBASE+39)
/*
* An invalid response was received from the RADIUS authentication server.
* Make sure that the case sensitive secret pasword for the RADIUS server is set correctly.%0
*/
#define ERROR_DIALIN_HOURS_RESTRICTION (ROUTEBASE+40)
/*
* You do not have permission to connect at this time.%0
*/
#define ERROR_ALLOWED_PORT_TYPE_RESTRICTION (ROUTEBASE+41)
/*
* You do not have permission to connect using the current device type.%0
*/
#define ERROR_AUTH_PROTOCOL_RESTRICTION (ROUTEBASE+42)
/*
* You do not have permission to connect using the selected authentication protocol.%0
*/
#define ERROR_BAP_REQUIRED (ROUTEBASE+43)
/*
* BAP is required for this user.%0
*/
#define ERROR_DIALOUT_HOURS_RESTRICTION (ROUTEBASE+44)
/*
* The interface is not allowed to connect at this time.%0
*/
#define ERROR_ROUTER_CONFIG_INCOMPATIBLE (ROUTEBASE+45)
/*
* The saved router configuration is incompatible with the current router.%0
*/
#define WARNING_NO_MD5_MIGRATION (ROUTEBASE+46)
/*
* RemoteAccess has detected older format user accounts that will not be
* migrated automatically. To migrate these manually, run XXXX.
*/
#define ERROR_PROTOCOL_ALREADY_INSTALLED (ROUTEBASE+48)
/*
* The transport is already installed with the router.%0
*/
#define ERROR_INVALID_SIGNATURE_LENGTH (ROUTEBASE+49)
/*
* Received invalid signature length in packet from RADIUS server.%0
*/
#define ERROR_INVALID_SIGNATURE (ROUTEBASE+50)
/*
* Received invalid signature in packet from RADIUS server.%0
*/
#define ERROR_NO_SIGNATURE (ROUTEBASE+51)
/*
* Did not receive signature along with EAPMessage from RADIUS server.%0
*/
#define ERROR_INVALID_PACKET_LENGTH_OR_ID (ROUTEBASE+52)
/*
* Received packet with invalid length or Id from RADIUS server.%0
*/
#define ERROR_INVALID_ATTRIBUTE_LENGTH (ROUTEBASE+53)
/*
* Received packet with attribute with invalid length from RADIUS server.%0
*/
#define ERROR_INVALID_PACKET (ROUTEBASE+54)
/*
* Received invalid packet from RADIUS server.%0
*/
#define ERROR_AUTHENTICATOR_MISMATCH (ROUTEBASE+55)
/*
* Authenticator does not match in packet from RADIUS server.%0
*/
#define ROUTEBASEEND (ROUTEBASE+56)
#endif // _MPRERROR_H_