/*++ Copyright (c) 1998 Microsoft Corporation Module Name: ixpciir.c Abstract: This module implements the code to provide Pci Irq Routing support. It reads the routing table, provides the Irq arbiter and uses the chipset miniport library to program the links. Author: Santosh Jodh (santoshj) 10-June-1998 Environment: Kernel mode only. Revision History: --*/ // // This module is compatible with PAE mode and therefore treats physical // addresses as 64-bit entities. // #if !defined(_PHYS64_) #define _PHYS64_ #endif #include "halp.h" #include #include #ifndef _IN_KERNEL_ #define _IN_KERNEL_ #include #undef _IN_KERNEL_ #else #include #endif #include "pcip.h" #include "ixpciir.h" #ifndef MAXIMUM_VALUE_NAME_LENGTH #define MAXIMUM_VALUE_NAME_LENGTH 256 #endif // // MS specification for PCI IRQ Routing specifies that the BIOS // provide the table in the ROM between the physical addresses // of 0xF0000 and 0xFFFFF. The table starts on a 16-byte boundary // with a 4-byte signature of "$PIR". // // Other restrictions: // // Version: Should be 1.0 // Size: Must be integral multiple of 16 bytes and > 32 bytes // Checksum: The entire table should checksum to 0. // #define PIRT_BIOS_START 0xf0000 #define PIRT_BIOS_END 0xfffff #define PIRT_BIOS_SIZE (PIRT_BIOS_END - PIRT_BIOS_START + 1) #define PIRT_ALIGNMENT 16 #define PIRT_SIGNATURE 'RIP$' // $PIR little endian #define PIRT_VERSION 0x0100 ULONG HalpGetIrqRoutingTable ( OUT PPCI_IRQ_ROUTING_TABLE *PciIrqRoutingTable, IN ULONG Options ); ULONG HalpInitializeMiniport ( IN OUT PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo ); NTSTATUS HalpInitLinkNodes ( PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo ); PPCI_IRQ_ROUTING_TABLE HalpGetRegistryTable ( IN const WCHAR* KeyName, IN const WCHAR* ValueName, IN ULONG HeaderSize OPTIONAL ); PPCI_IRQ_ROUTING_TABLE HalpGetPCIBIOSTableFromRealMode( VOID ); PPCI_IRQ_ROUTING_TABLE HalpGet$PIRTable ( VOID ); PPCI_IRQ_ROUTING_TABLE HalpCopy$PIRTable ( IN PUCHAR BiosPtr, IN PUCHAR BiosEnd ); BOOLEAN HalpSanityCheckTable ( IN PPCI_IRQ_ROUTING_TABLE PciIrqRoutingTable, IN BOOLEAN IgnoreChecksum ); PSLOT_INFO HalpBarberPole ( IN PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo, IN PDEVICE_OBJECT Pdo, IN ULONG Bus, IN ULONG Slot, IN OUT PUCHAR Pin ); BOOLEAN HalpBarberPolePin ( IN PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo, IN PDEVICE_OBJECT Parent, IN ULONG Bus, IN ULONG Device, IN OUT PUCHAR Pin ); PSLOT_INFO HalpGetSlotInfo ( IN PPCI_IRQ_ROUTING_TABLE PciIrqRoutingTable, IN UCHAR Bus, IN UCHAR Device ); NTSTATUS HalpReadRegistryValue ( IN HANDLE Root, IN const WCHAR* KeyName, IN const WCHAR* ValueName, OUT PULONG Data ); NTSTATUS HalpWriteRegistryValue ( IN HANDLE Root, IN const WCHAR* KeyName, IN const WCHAR* ValueName, IN ULONG Value ); #ifdef ALLOC_PRAGMA #pragma alloc_text(PAGE, HalpInitPciIrqRouting) #pragma alloc_text(PAGE, HalpGetIrqRoutingTable) #pragma alloc_text(PAGE, HalpInitializeMiniport) #pragma alloc_text(PAGE, HalpInitLinkNodes) #pragma alloc_text(PAGE, HalpGetRegistryTable) #pragma alloc_text(PAGE, HalpGetPCIBIOSTableFromRealMode) #pragma alloc_text(PAGE, HalpGet$PIRTable) #pragma alloc_text(PAGE, HalpCopy$PIRTable) #pragma alloc_text(PAGE, HalpSanityCheckTable) #pragma alloc_text(PAGE, HalpBarberPole) #pragma alloc_text(PAGE, HalpBarberPolePin) #pragma alloc_text(PAGE, HalpFindLinkNode) #pragma alloc_text(PAGE, HalpGetSlotInfo) #pragma alloc_text(PAGE, HalpReadRegistryValue) #pragma alloc_text(PAGE, HalpWriteRegistryValue) #pragma alloc_text(PAGE, HalpProgramInterruptLine) #pragma alloc_text(PAGELK, HalpCommitLink) #endif extern PULONG InitSafeBootMode; #ifdef ALLOC_DATA_PRAGMA #pragma const_seg("PAGECONST") #endif // ALLOC_DATA_PRAGMA // // Global key for Pci Irq Routing. // const WCHAR rgzPciIrqRouting[] = REGSTR_PATH_PCIIR; // // Pci Irq Routing options value. // const WCHAR rgzOptions[] = REGSTR_VAL_OPTIONS; // // Pci Irq Routing status values. // const WCHAR rgzStatus[] = REGSTR_VAL_STAT; // // Pci Irq Routing Table status values. // const WCHAR rgzTableStatus[] = REGSTR_VAL_TABLE_STAT; // // Pci Irq Routing Miniport status values. // const WCHAR rgzMiniportStatus[] = REGSTR_VAL_MINIPORT_STAT; // // Offset from 0xF0000 where $PIR table was last found. // const WCHAR rgz$PIROffset[] = L"$PIROffset"; // // Irq Miniports key under rgzPciIrqRouting. // This key contains keys whose name is the device-vendor id // for the chipsets we support. // const WCHAR rgzIrqMiniports[] = REGSTR_PATH_PCIIR L"\\IrqMiniports"; // // Each miniport key contains a instance value which // corresponds to the entry for the chipset in the // miniport table. // const WCHAR rgzInstance[] = L"Instance"; // // This key overrides all miniports if present. // const WCHAR rgzOverride[] = L"Override"; // // Registry key for the routing table. // const WCHAR rgzIrqRoutingTable[] = REGSTR_PATH_PCIIR L"\\IrqRoutingTables"; // // Registry key for BIOS attributes. // const WCHAR rgzBiosInfo[] = REGSTR_PATH_BIOSINFO L"\\PciIrqRouting"; const WCHAR rgzAttributes[] = L"Attributes"; const WCHAR rgzPciParameters[] = L"Parameters"; #ifdef ALLOC_DATA_PRAGMA #pragma const_seg() #endif // ALLOC_DATA_PRAGMA PCI_IRQ_ROUTING_INFO HalpPciIrqRoutingInfo = {0}; ULONG HalpIrqMiniportInitialized = 0; NTSTATUS HalpInitPciIrqRouting ( OUT PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo ) /*++ Routine Description: This routine initializes Pci Irq Routing by reading the Irq routing table, initializing the chipset miniport and initializing the Pci Interrupt Routing interface. Input Parameters: PciIrqRoutingInfo - Pci Irq Routing information. Return Value: --*/ { NTSTATUS status; ULONG pirStatus; ULONG tableStatus; ULONG miniportStatus; ULONG pirOptions; PAGED_CODE(); // // Setup to return failure. // HalpIrqMiniportInitialized = 0; status = STATUS_UNSUCCESSFUL; pirStatus = PIR_STATUS_MAX; tableStatus = PIR_STATUS_TABLE_MAX | (PIR_STATUS_TABLE_MAX << 16); miniportStatus = PIR_STATUS_MINIPORT_MAX | (PIR_STATUS_MINIPORT_MAX << 16); // // No IRQ routing in safe boot. // if (!(*InitSafeBootMode)) { pirStatus = PIR_STATUS_DISABLED; // // Read Pci Interrupt Routing options set by the user. // pirOptions = 0; HalpReadRegistryValue(NULL, rgzPciIrqRouting, rgzOptions, &pirOptions); // // Make sure Pci Interrupt Routing is not disabled. // if (pirOptions & PIR_OPTION_ENABLED) { // // First get the interface from Pci. // if (PciIrqRoutingInfo->PciInterface) { HalPrint(("Obtained the Pci Interrupt Routing Interface from Pci driver!")); status = STATUS_UNSUCCESSFUL; // // Get the Pci Interrupt Routing table for this motherboard. // tableStatus = HalpGetIrqRoutingTable(&PciIrqRoutingInfo->PciIrqRoutingTable, pirOptions); if ((tableStatus & 0xFFFF) < PIR_STATUS_TABLE_NONE) { // // Get the miniport instance for this motherboard. // miniportStatus = HalpInitializeMiniport(PciIrqRoutingInfo); if ((miniportStatus & 0xFFFF) < PIR_STATUS_MINIPORT_NONE) { // // Validate the Pci Irq Routing table with the miniport. // status = PciirqmpValidateTable( PciIrqRoutingInfo->PciIrqRoutingTable, ((tableStatus & 0xFFFF) == PIR_STATUS_TABLE_REALMODE)? 1 : 0); if (!NT_SUCCESS(status)) { HalPrint(("Pci irq miniport failed to validate the routing table!")); miniportStatus |= (PIR_STATUS_MINIPORT_INVALID << 16); } else { HalPrint(("Pci irq miniport validated routing table!")); miniportStatus |= (PIR_STATUS_MINIPORT_SUCCESS << 16); pirStatus = PIR_STATUS_ENABLED; HalpIrqMiniportInitialized = TRUE; } } } } else { pirStatus = PIR_STATUS_ERROR; } } else { HalPrint(("Pci Irq Routing disabled!")); } // // Create list of links. // if (NT_SUCCESS(status)) { status = HalpInitLinkNodes(PciIrqRoutingInfo); } // // Free the memory for the routing table if there was any error. // if (!NT_SUCCESS(status)) { if (PciIrqRoutingInfo->PciIrqRoutingTable != NULL) { ExFreePool(PciIrqRoutingInfo->PciIrqRoutingTable); PciIrqRoutingInfo->PciIrqRoutingTable = NULL; } if (PciIrqRoutingInfo->PciInterface) { PciIrqRoutingInfo->PciInterface = NULL; } } // // Initialize the miniport if not done yet. // if (!HalpIrqMiniportInitialized) { PCI_IRQ_ROUTING_TABLE table; // // Use a local routing table variable since the miniport initialization // just needs to look at certain fields in the table. // PciIrqRoutingInfo->PciIrqRoutingTable = &table; PciIrqRoutingInfo->PciIrqRoutingTable->RouterBus = 0; PciIrqRoutingInfo->PciIrqRoutingTable->RouterDevFunc = 0; PciIrqRoutingInfo->PciIrqRoutingTable->CompatibleRouter = 0xFFFFFFFF; PciIrqRoutingInfo->PciIrqRoutingTable->MiniportData = 0; HalpIrqMiniportInitialized = ((HalpInitializeMiniport(PciIrqRoutingInfo) & 0xFFFF) < PIR_STATUS_MINIPORT_NONE)? TRUE : FALSE; // // Reset the routing table to NULL since we dont need it any more. // PciIrqRoutingInfo->PciIrqRoutingTable = NULL; } } // // Record the status in the registry for user display. // HalpWriteRegistryValue(NULL, rgzPciIrqRouting, rgzStatus, pirStatus); HalpWriteRegistryValue(NULL, rgzPciIrqRouting, rgzTableStatus, tableStatus); HalpWriteRegistryValue(NULL, rgzPciIrqRouting, rgzMiniportStatus, miniportStatus); return (status); } ULONG HalpGetIrqRoutingTable ( OUT PPCI_IRQ_ROUTING_TABLE *PciIrqRoutingTable, IN ULONG Options ) /*++ Routine Description: Reads the Pci Irq Routing table. First tries to read the table from the registry if available. Otherwise scans the BIOS ROM for the $PIR table. Input Parameters: PciIrqRoutingTable is the pointer to the variable that recieves the pointer to the routing table. Return Value: Status value indicating the source of the table. --*/ { ULONG tableStatus = PIR_STATUS_TABLE_NONE | (PIR_STATUS_TABLE_MAX << 16); ULONG biosAttributes = 0; PAGED_CODE(); *PciIrqRoutingTable = NULL; HalpReadRegistryValue(NULL, rgzBiosInfo, rgzAttributes, &biosAttributes); if (Options & PIR_OPTION_REGISTRY) { // // First try getting it from the registry. // *PciIrqRoutingTable = HalpGetRegistryTable(rgzIrqRoutingTable, rgzOverride, 0); if (*PciIrqRoutingTable != NULL) { HalPrint(("Pci Irq Table read from the registry!")); tableStatus = PIR_STATUS_TABLE_REGISTRY; } } if ((Options & PIR_OPTION_MSSPEC) && !(biosAttributes & PIR_OPTION_MSSPEC)) { if (*PciIrqRoutingTable == NULL) { // // Next try getting it by scanning the BIOS ROM for $PIR table. // *PciIrqRoutingTable = HalpGet$PIRTable(); if (*PciIrqRoutingTable != NULL) { HalPrint(("Pci Irq Routing table read from $PIR table in BIOS ROM!")); tableStatus = PIR_STATUS_TABLE_MSSPEC; } } } if ((Options & PIR_OPTION_REALMODE) && !(biosAttributes & PIR_OPTION_REALMODE)) { if (*PciIrqRoutingTable == NULL) { // // First try getting it from the registry. // *PciIrqRoutingTable = HalpGetPCIBIOSTableFromRealMode(); if (*PciIrqRoutingTable != NULL) { HalPrint(("Pci Irq Table read from PCI BIOS using real-mode interface!")); tableStatus = PIR_STATUS_TABLE_REALMODE; } } } if (*PciIrqRoutingTable == NULL) { if (biosAttributes) { tableStatus = PIR_STATUS_TABLE_BAD | (PIR_STATUS_TABLE_MAX << 16); } HalPrint(("No Pci Irq Routing table found for this system!")); } else { tableStatus |= (PIR_STATUS_TABLE_SUCCESS << 16); } return (tableStatus); } ULONG HalpInitializeMiniport ( IN OUT PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo ) /*++ Routine Description: Initializes the appropriate miniport for this motherboard. Input Parameters: PciIrqRoutingTable - Routing Table for which miniport needs to be initialized. Return Value: Status value indicating whether the miniport initialized or not. --*/ { ULONG miniportStatus; NTSTATUS status; PBUS_HANDLER busHandler; PCI_SLOT_NUMBER slotNumber; ULONG device; ULONG function; ULONG routerId; ULONG miniportInstance; HANDLE irqMiniport; UCHAR headerType; WCHAR buffer[10]; UNICODE_STRING keyName; PPCI_IRQ_ROUTING_TABLE pciIrqRoutingTable = PciIrqRoutingInfo->PciIrqRoutingTable; PAGED_CODE(); // // Setup to return failure. // miniportStatus = PIR_STATUS_MINIPORT_NONE; // // Open the Pci Interrupt Miniport key. // RtlInitUnicodeString( &keyName, rgzIrqMiniports); status = HalpOpenRegistryKey( &irqMiniport, NULL, &keyName, KEY_READ, FALSE); if (NT_SUCCESS(status)) { // // First see if there is any overriding miniport. // status = HalpReadRegistryValue( irqMiniport, rgzOverride, rgzInstance, &miniportInstance); if (!NT_SUCCESS(status)) { // // Next see if there is an entry for the specified device. // busHandler = HalpHandlerForBus(PCIBus, pciIrqRoutingTable->RouterBus); if (busHandler) { slotNumber.u.bits.DeviceNumber = pciIrqRoutingTable->RouterDevFunc >> 3; slotNumber.u.bits.FunctionNumber = pciIrqRoutingTable->RouterDevFunc & 0x07; routerId = 0xFFFFFFFF; HalpReadPCIConfig( busHandler, slotNumber, &routerId, 0, 4); if (routerId != 0xFFFFFFFF) { swprintf(buffer, L"%08X", routerId); status = HalpReadRegistryValue( irqMiniport, buffer, rgzInstance, &miniportInstance); if (NT_SUCCESS(status)) { HalPrint(("Found miniport instance %08X for this motherboard!", miniportInstance)); miniportStatus = PIR_STATUS_MINIPORT_NORMAL; HalpReadRegistryValue(irqMiniport, buffer, rgzPciParameters, &PciIrqRoutingInfo->Parameters); } } } } else { HalPrint(("Overriding miniport instance %08X found for this motherboard!", miniportInstance)); miniportStatus = PIR_STATUS_MINIPORT_OVERRIDE; } // // Next see if we have a miniport for the compatible router. // if (miniportStatus == PIR_STATUS_MINIPORT_NONE) { // // Make sure there is a valid compatible router. // if ( pciIrqRoutingTable->CompatibleRouter != 0xFFFFFFFF && pciIrqRoutingTable->CompatibleRouter != 0) { swprintf(buffer, L"%08X", pciIrqRoutingTable->CompatibleRouter); status = HalpReadRegistryValue( irqMiniport, buffer, rgzInstance, &miniportInstance); if (NT_SUCCESS(status)) { HalPrint(("Found miniport instance %08X for this motherboard using compatible router %08X!", miniportInstance, pciIrqRoutingTable->CompatibleRouter)); miniportStatus = PIR_STATUS_MINIPORT_COMPATIBLE; HalpReadRegistryValue(irqMiniport, buffer, rgzPciParameters, &PciIrqRoutingInfo->Parameters); } } } if (miniportStatus == PIR_STATUS_MINIPORT_NONE) { // // Last see if any device on bus 0 matches any of our supported // routers. // busHandler = HalpHandlerForBus(PCIBus, 0); if (busHandler) { slotNumber.u.AsULONG = 0; for ( device = 0; device < PCI_MAX_DEVICES && (miniportStatus == PIR_STATUS_MINIPORT_NONE); device++) { slotNumber.u.bits.DeviceNumber = device; for (function = 0; function < PCI_MAX_FUNCTION; function++) { slotNumber.u.bits.FunctionNumber = function; // // Dont waste time if this is not a multifunction device. // if (function == 1) { headerType = 0; HalpReadPCIConfig( busHandler, slotNumber, &headerType, 0x0E, sizeof(headerType)); if (!(headerType & PCI_MULTIFUNCTION)) break; } routerId = 0xFFFFFFFF; HalpReadPCIConfig( busHandler, slotNumber, &routerId, 0, 4); if (routerId == 0xFFFFFFFF) continue; swprintf(buffer, L"%08X", routerId); status = HalpReadRegistryValue( irqMiniport, buffer, rgzInstance, &miniportInstance); if (NT_SUCCESS(status)) { HalPrint(("Found miniport instance %08X for this motherboard for bus 0 device %08X", miniportInstance, routerId)); pciIrqRoutingTable->RouterBus = 0; pciIrqRoutingTable->RouterDevFunc = (UCHAR)((device << 3) + function); miniportStatus = PIR_STATUS_MINIPORT_NORMAL; HalpReadRegistryValue(irqMiniport, buffer, rgzPciParameters, &PciIrqRoutingInfo->Parameters); break; } } } } } ZwClose(irqMiniport); // // Initialize the miniport if we found one. // if (miniportStatus != PIR_STATUS_MINIPORT_NONE) { status = PciirqmpInit( miniportInstance, pciIrqRoutingTable->RouterBus, pciIrqRoutingTable->RouterDevFunc); if (!NT_SUCCESS(status)) { HalPrint(("Pci Irq miniport %08X failed to initialize!", miniportInstance)); miniportStatus |= (PIR_STATUS_MINIPORT_ERROR << 16); } else { HalPrint(("Pci Irq miniport %08X successfully initialized!", miniportInstance)); } } else { HalPrint(("No Pci Irq miniport found for this system!")); miniportStatus |= (PIR_STATUS_MINIPORT_MAX << 16); } } else { HalPrint(("Could not open the Pci Irq Miniports key, no miniports provided!")); miniportStatus = PIR_STATUS_MINIPORT_NOKEY | (PIR_STATUS_MINIPORT_MAX << 16); } return (miniportStatus); } NTSTATUS HalpInitLinkNodes ( PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo ) /*++ Routine Description: This routine creates a singly linked list of link nodes structures from the Pci Irq Routing table. Input Parameters: PciIrqRoutingInfo - Pci Irq Routing Information. Return Value: STATUS_SUCCESS iff successful. Else STATUS_UNSUCCESSFUL. --*/ { PPCI_IRQ_ROUTING_TABLE pciIrqRoutingTable; PSLOT_INFO slotInfo; PSLOT_INFO lastSlot; PPIN_INFO pinInfo; PPIN_INFO lastPin; PLINK_NODE linkNode; NTSTATUS status = STATUS_SUCCESS; PLINK_NODE temp; ASSERT(PciIrqRoutingInfo); pciIrqRoutingTable = PciIrqRoutingInfo->PciIrqRoutingTable; PciIrqRoutingInfo->LinkNodeHead = NULL; // // Process all slots in this table. // slotInfo = (PSLOT_INFO)((PUCHAR)pciIrqRoutingTable + sizeof(PCI_IRQ_ROUTING_TABLE)); lastSlot = (PSLOT_INFO)((PUCHAR)pciIrqRoutingTable + pciIrqRoutingTable->TableSize); while (slotInfo < lastSlot) { // // Process all pins. // pinInfo = &slotInfo->PinInfo[0]; lastPin = &slotInfo->PinInfo[NUM_IRQ_PINS]; while (pinInfo < lastPin) { // // Only process valid link values. // if(pinInfo->Link) { // // Have we seen this link before. // for ( linkNode = PciIrqRoutingInfo->LinkNodeHead; linkNode && linkNode->Link != pinInfo->Link; linkNode = linkNode->Next); if (linkNode == NULL) { // // Allocate memory for new link info. // linkNode = ExAllocatePoolWithTag( NonPagedPool, sizeof(LINK_NODE), HAL_POOL_TAG); if (linkNode) { linkNode->Allocation = ExAllocatePoolWithTag( NonPagedPool, sizeof(LINK_STATE), HAL_POOL_TAG); linkNode->PossibleAllocation = ExAllocatePoolWithTag( NonPagedPool, sizeof(LINK_STATE), HAL_POOL_TAG); if ( linkNode->Allocation && linkNode->PossibleAllocation) { linkNode->Signature = PCI_LINK_SIGNATURE; linkNode->Next = PciIrqRoutingInfo->LinkNodeHead; PciIrqRoutingInfo->LinkNodeHead = linkNode; linkNode->Link = pinInfo->Link; linkNode->InterruptMap = pinInfo->InterruptMap; linkNode->Allocation->Interrupt = 0; linkNode->Allocation->RefCount = 0; linkNode->PossibleAllocation->Interrupt = 0; linkNode->PossibleAllocation->RefCount = 0; } else { status = STATUS_UNSUCCESSFUL; break; } } else { status = STATUS_UNSUCCESSFUL; break; } } } // // Next pin. // pinInfo++; } // // Next slot. // slotInfo++; } // // Clean up if there was an error. // if (!NT_SUCCESS(status)) { linkNode = PciIrqRoutingInfo->LinkNodeHead; while (linkNode) { if (linkNode->Allocation) { ExFreePool(linkNode->Allocation); } if (linkNode->PossibleAllocation) { ExFreePool(linkNode->PossibleAllocation); } temp = linkNode; linkNode = linkNode->Next; ExFreePool(temp); } PciIrqRoutingInfo->LinkNodeHead = NULL; } return (status); } PPCI_IRQ_ROUTING_TABLE HalpGetRegistryTable ( IN const WCHAR* KeyName, IN const WCHAR* ValueName, IN ULONG HeaderSize OPTIONAL ) /*++ Routine Description: Reads the Pci Irq Routing Table from the registry. The table is saved as Override value under IrqRoutingTable key. Input Parameters: None. Return Value: Pointer to the Pci Irq Routing Table if successful. NULL if there is no valid table in the registry. --*/ { PVOID table = NULL; NTSTATUS status; HANDLE hPIR; ULONG tableSize; PKEY_VALUE_FULL_INFORMATION valueInfo; PVOID buffer; UNICODE_STRING override; UNICODE_STRING keyName; PAGED_CODE(); // // Open the PciInterruptRouting registry key. // RtlInitUnicodeString(&keyName, KeyName); status = HalpOpenRegistryKey(&hPIR, NULL, &keyName, KEY_ALL_ACCESS, FALSE); if (NT_SUCCESS(status)) { // // Get the size of the table. // tableSize = 0; RtlInitUnicodeString(&override, ValueName); status = ZwQueryValueKey( hPIR, &override, KeyValueFullInformation, NULL, 0, &tableSize); if (tableSize != 0) { // // Allocate memory for the table. // buffer = ExAllocatePoolWithTag( PagedPool, tableSize, HAL_POOL_TAG); if (buffer != NULL) { // // Read the table. // status = ZwQueryValueKey( hPIR, &override, KeyValueFullInformation, buffer, tableSize, &tableSize); if (NT_SUCCESS(status)) { valueInfo = (PKEY_VALUE_FULL_INFORMATION)buffer; table = ExAllocatePoolWithTag( PagedPool, valueInfo->DataLength - HeaderSize, HAL_POOL_TAG); if (table != NULL) { memcpy( table, (PUCHAR)buffer + valueInfo->DataOffset + HeaderSize, valueInfo->DataLength - HeaderSize); if (HalpSanityCheckTable(table, TRUE) == FALSE) { ExFreePool(table); table = NULL; } } else { HalPrint(("Could not allocate memory to read the Pci Irq Routing Table from the registry!")); ASSERT(table); } } ExFreePool(buffer); } else { HalPrint(("Could not allocate memory to read the Pci Irq Routing Table from the registry!")); ASSERT(buffer); } } ZwClose(hPIR); } return (table); } PPCI_IRQ_ROUTING_TABLE HalpGet$PIRTable ( VOID ) /*++ Routine Description: Reads the Pci Irq Routing Table from $PIR table in the BIOS ROM. Input Parameters: None. Return Value: Pointer to the Pci Irq Routing Table if successful. NULL if there is no valid table in the ROM. --*/ { PUCHAR biosStart; PUCHAR biosEnd; PUCHAR searchPtr; NTSTATUS status; ULONG offset; PPCI_IRQ_ROUTING_TABLE table; PHYSICAL_ADDRESS biosStartPhysical; PAGED_CODE(); // // Setup to return failure. // table = NULL; biosStartPhysical.QuadPart = PIRT_BIOS_START; biosStart = (PUCHAR)HalpMapPhysicalMemory( biosStartPhysical, PIRT_BIOS_SIZE >> PAGE_SHIFT); if (biosStart != NULL) { biosEnd = biosStart + PIRT_BIOS_SIZE; // // First try the cached location from the registry. // status = HalpReadRegistryValue( NULL, rgzPciIrqRouting, rgz$PIROffset, &offset); if (NT_SUCCESS(status)) { table = HalpCopy$PIRTable(biosStart + offset, biosEnd); } if (table == NULL) { for ( searchPtr = biosStart; searchPtr < biosEnd; searchPtr += PIRT_ALIGNMENT) { table = HalpCopy$PIRTable(searchPtr, biosEnd); if (table != NULL) { // // Record this offset so it can be used on the next boot. // offset = searchPtr - biosStart; HalPrint(("Recording location %08X of $PIR table in the registry!", PIRT_BIOS_START + offset)); HalpWriteRegistryValue( NULL, rgzPciIrqRouting, rgz$PIROffset, offset); break; } } } else { HalPrint(("Used cached location %08X to read $PIR table!", PIRT_BIOS_START + offset)); } } else { HalPrint(("Failed to map BIOS ROM to scan for $PIR Pci Irq Routing Table!")); ASSERT(biosStart); } return (table); } PPCI_IRQ_ROUTING_TABLE HalpGetPCIBIOSTableFromRealMode( VOID ) /*++ Routine Description: Gets the PCI IRQ routing table from PCI BIOS using real-mode interface. The table is read by ntdetect.com and added to the ARC tree in the registry. Input Parameters: None. Return Value: Pointer to the Pci Irq Routing Table if successful. NULL if there is no valid table. --*/ { PPCI_IRQ_ROUTING_TABLE table = NULL; NTSTATUS status; HANDLE mf; HANDLE child = NULL; UNICODE_STRING unicodeString; ULONG index; ULONG length; ULONG temp; BOOLEAN done; BOOLEAN error; PKEY_BASIC_INFORMATION keyInfo; PKEY_VALUE_FULL_INFORMATION childInfo; length = PAGE_SIZE; keyInfo = ExAllocatePoolWithTag( PagedPool, length, HAL_POOL_TAG); if (keyInfo == NULL) { HalPrint(("Could not allocate memory to enumerate keys!")); return (table); } childInfo = ExAllocatePoolWithTag( PagedPool, length, HAL_POOL_TAG); if (childInfo == NULL) { ExFreePool(keyInfo); HalPrint(("Could not allocate memory to query value!")); return (table); } // // Search for the IRQ routing table under the multifunction branch of the registry. // RtlInitUnicodeString( &unicodeString, L"\\Registry\\MACHINE\\HARDWARE\\DESCRIPTION\\System\\MultiFunctionAdapter"); status = HalpOpenRegistryKey(&mf, NULL, &unicodeString, MAXIMUM_ALLOWED, FALSE); if (NT_SUCCESS(status)) { index = 0; done = FALSE; error = FALSE; while (!done && !error) { error = TRUE; status = ZwEnumerateKey( mf, index++, KeyBasicInformation, keyInfo, length, &temp); if (NT_SUCCESS(status)) { keyInfo->Name[keyInfo->NameLength / sizeof(WCHAR)] = UNICODE_NULL; RtlInitUnicodeString(&unicodeString, keyInfo->Name); status = HalpOpenRegistryKey( &child, mf, &unicodeString, MAXIMUM_ALLOWED, FALSE); if (NT_SUCCESS(status)) { // // Read the "identifier". // RtlInitUnicodeString(&unicodeString, L"Identifier"); status = ZwQueryValueKey( child, &unicodeString, KeyValueFullInformation, childInfo, length, &temp); if (NT_SUCCESS(status)) { error = FALSE; if ((8 * sizeof(WCHAR) + sizeof(UNICODE_NULL)) == childInfo->DataLength) { done = RtlEqualMemory( (PCHAR)childInfo + childInfo->DataOffset, L"PCI BIOS", childInfo->DataLength); } } else { HalPrint(("Failed to query value!")); } } else { HalPrint(("Could not open child key!")); } } else { HalPrint(("Failed to enumerate keys!")); } // // Close the child key if it was successfully opened. // if (child) { ZwClose(child); child = NULL; } } // // Close the MF adapter key. // ZwClose(mf); if (done && !error) { unicodeString.Length = 0; unicodeString.MaximumLength = (USHORT)(256 * sizeof(WCHAR) + keyInfo->NameLength); unicodeString.Buffer = ExAllocatePoolWithTag( PagedPool, unicodeString.MaximumLength, HAL_POOL_TAG); if (unicodeString.Buffer) { RtlAppendUnicodeToString( &unicodeString, L"\\Registry\\MACHINE\\HARDWARE\\DESCRIPTION\\System\\MultiFunctionAdapter\\"); RtlAppendUnicodeToString(&unicodeString, keyInfo->Name); RtlAppendUnicodeToString(&unicodeString, L"\\RealModeIrqRoutingTable\\0"); table = HalpGetRegistryTable(unicodeString.Buffer, L"Configuration Data", sizeof(CM_FULL_RESOURCE_DESCRIPTOR)); if (table == NULL) { HalPrint(("Could not read table from PCIBIOS using real-mode interface!")); } ExFreePool(unicodeString.Buffer); } else { HalPrint(("Could not allocate memory to read routing table from PCIBIOS real-mode interface!")); } } ExFreePool(keyInfo); ExFreePool(childInfo); } return (table); } PPCI_IRQ_ROUTING_TABLE HalpCopy$PIRTable ( IN PUCHAR BiosPtr, IN PUCHAR BiosEnd ) /*++ Routine Description: Allocates memory and copies the $PIR table if found at the specified address. Input Parameters: BiosPtr is the location that possibly contains the $PIR table. BiosEnd is the last possible BIOS ROM address. Return Value: Pointer to the Pci Irq Routing Table if successful. NULL if there is no valid table at the specified address. --*/ { PPCI_IRQ_ROUTING_TABLE table = (PPCI_IRQ_ROUTING_TABLE)BiosPtr; PVOID buffer = NULL; PAGED_CODE(); // // Validate this table. // if ( (table->Signature == PIRT_SIGNATURE) && (BiosPtr + table->TableSize <= BiosEnd) && (table->Signature == PIRT_SIGNATURE) && (table->TableSize > 0) ) { // // Allocate memory for the table. // buffer = ExAllocatePoolWithTag( PagedPool, table->TableSize, HAL_POOL_TAG); if (buffer != NULL) { // // Copy the table from the ROM into the allocated memory. // memcpy(buffer, table, table->TableSize); if (!HalpSanityCheckTable(buffer, FALSE)) { ExFreePool(buffer); buffer = NULL; } } else { HalPrint(("Failed to allocate memory for $PIR Pci Irq Routing Table!")); ASSERT(buffer); } } return (buffer); } BOOLEAN HalpSanityCheckTable ( IN PPCI_IRQ_ROUTING_TABLE PciIrqRoutingTable, IN BOOLEAN IgnoreChecksum ) /*++ Routine Description: Validate the Pci Irq Routing Table. Input Parameters: PciIrqRoutingTable - Pointer to the Pci Irq Routing Table. Return Value: TRUE if this is a valid table, else FALSE. --*/ { CHAR checkSum; PUCHAR tablePtr; PUCHAR tableEnd; PSLOT_INFO slotInfo; PSLOT_INFO lastSlot; PPIN_INFO pinInfo; PPIN_INFO lastPin; BOOLEAN hasNonZeroBusEntries = FALSE; BOOLEAN valid = TRUE; PAGED_CODE(); // // Test1: Should have a valid signature. // if (PciIrqRoutingTable->Signature != PIRT_SIGNATURE) { HalPrint(("Pci Irq Routing Table has invalid signature %08X!", PciIrqRoutingTable->Signature)); valid = FALSE; } // // Test2 - Should have a valid version. // else if (PciIrqRoutingTable->Version != PIRT_VERSION) { HalPrint(("Pci Irq Routing Table has invalid version %04X!", PciIrqRoutingTable->Version)); valid = FALSE; } // // Test3 - Should have a valid size. // else if ( PciIrqRoutingTable->TableSize % 16 != 0 || PciIrqRoutingTable->TableSize <= sizeof (PCI_IRQ_ROUTING_TABLE)) { HalPrint(("Pci Irq Routing Table has invalid size %04X!", PciIrqRoutingTable->TableSize)); valid = FALSE; } else if (!IgnoreChecksum) { // // Test4 - Should have a valid checksum. // checkSum = 0; tablePtr = (PUCHAR)PciIrqRoutingTable; for ( tableEnd = tablePtr + PciIrqRoutingTable->TableSize; tablePtr < tableEnd; tablePtr++) { checkSum += *tablePtr; } if (checkSum != 0) { HalPrint(("Pci Irq Routing Table checksum is invalid!")); valid = FALSE; } } if(valid) { PSLOT_INFO testSlot; ULONG pin; // // First get rid of sutpid entries. // slotInfo = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + sizeof(PCI_IRQ_ROUTING_TABLE)); lastSlot = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + PciIrqRoutingTable->TableSize); while (slotInfo < lastSlot && valid) { // // Process all pins. // pinInfo = &slotInfo->PinInfo[0]; lastPin = &slotInfo->PinInfo[NUM_IRQ_PINS]; while (pinInfo < lastPin) { // // Check for bad cases. // if(pinInfo->Link) { if ( pinInfo->InterruptMap == 0x0000 || pinInfo->InterruptMap == 0x0001) { HalPrint(("Removing stupid maps (%04X) from IRQ routing table entry (b=%02X, d=%02X, s=%02X)!", pinInfo->InterruptMap, slotInfo->BusNumber, slotInfo->DeviceNumber>>3, slotInfo->SlotNumber)); pinInfo->InterruptMap = 0; pinInfo->Link = 0; } } // // Next pin. // pinInfo++; } // // Remove this entry if all pins have NULL links. // if ( slotInfo->PinInfo[0].Link == 0 && slotInfo->PinInfo[1].Link == 0 && slotInfo->PinInfo[2].Link == 0 && slotInfo->PinInfo[3].Link == 0) { HalPrint(("Removed redundant entry (b=%02X, d=%02X, s=%02X) from IRQ routing table!", slotInfo->BusNumber, slotInfo->DeviceNumber>>3, slotInfo->SlotNumber)); *slotInfo = *(--lastSlot); PciIrqRoutingTable->TableSize -= sizeof(SLOT_INFO); // // Need to test the newly copied entry. // continue; } // // Merge entries for MF devices. // testSlot = slotInfo + 1; while (testSlot < lastSlot) { if ( (testSlot->DeviceNumber & 0xF8) == (slotInfo->DeviceNumber & 0xF8) && testSlot->BusNumber == slotInfo->BusNumber) { // // Process all pins. // for (pin = 0; pin < NUM_IRQ_PINS; pin++) { if (testSlot->PinInfo[pin].Link) { if (slotInfo->PinInfo[pin].Link) { HalPrint(("Multiple entries for the same device (b=%02X, d=%02X, s=%02X) and link (%04X) in IRQ routing table!", slotInfo->BusNumber, slotInfo->DeviceNumber>>3, slotInfo->SlotNumber, slotInfo->PinInfo[pin].Link)); valid = FALSE; break; } else { HalPrint(("Merging multiple entries for same device (b=%02X, d=%02X, s=%02X) in IRQ routing table!", slotInfo->BusNumber, slotInfo->DeviceNumber>>3, slotInfo->SlotNumber)); slotInfo->PinInfo[pin] = testSlot->PinInfo[pin]; } } } if (!valid) { break; } *testSlot = *(--lastSlot); PciIrqRoutingTable->TableSize -= sizeof(SLOT_INFO); // // Need to test the newly copied entry. // continue; } testSlot++; } if (slotInfo->BusNumber > 0) { hasNonZeroBusEntries = TRUE; } // // Next slot. // slotInfo++; } if (valid && PciIrqRoutingTable->TableSize == sizeof(PCI_IRQ_ROUTING_TABLE)) { HalPrint(("No IRQ routing table left after sanity checking!")); valid = FALSE; } } // // Make sure there are entries for all bus 0 devices in the table. // if (valid) { PBUS_HANDLER busHandler; PCI_SLOT_NUMBER slotNumber; ULONG device; ULONG function; UCHAR buffer[PCI_COMMON_HDR_LENGTH]; PPCI_COMMON_CONFIG pciData = (PPCI_COMMON_CONFIG)&buffer[0]; busHandler = HalpHandlerForBus(PCIBus, 0); if (busHandler) { slotNumber.u.AsULONG = 0; for ( device = 0; device < PCI_MAX_DEVICES && valid; device++) { slotNumber.u.bits.DeviceNumber = device; for (function = 0; function < PCI_MAX_FUNCTION && valid; function++) { slotNumber.u.bits.FunctionNumber = function; // // Read the standard config space. // HalpReadPCIConfig(busHandler, slotNumber, pciData, 0, PCI_COMMON_HDR_LENGTH); // // Make sure this is a valid device. // if (pciData->VendorID != 0xFFFF && pciData->DeviceID != 0xFFFF) { // // Ignore IDE devices. // if ( (pciData->BaseClass != PCI_CLASS_MASS_STORAGE_CTLR && pciData->SubClass != PCI_SUBCLASS_MSC_IDE_CTLR) || (pciData->ProgIf & 0x05)) { // // Handle P-P bridges separately. // if ( ((pciData->HeaderType & 0x7F) == PCI_BRIDGE_TYPE) && pciData->BaseClass == PCI_CLASS_BRIDGE_DEV && pciData->SubClass == PCI_SUBCLASS_BR_PCI_TO_PCI) { // // P-P bridge. // if (!hasNonZeroBusEntries) { // // Must have the bridge with at least one entry. // slotInfo = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + sizeof(PCI_IRQ_ROUTING_TABLE)); lastSlot = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + PciIrqRoutingTable->TableSize); valid = FALSE; while (slotInfo < lastSlot && !valid) { if ((slotInfo->DeviceNumber>>3) == (UCHAR)device) { // // Process all pins. // pinInfo = &slotInfo->PinInfo[0]; lastPin = &slotInfo->PinInfo[NUM_IRQ_PINS]; while (pinInfo < lastPin) { if(pinInfo->Link) { valid = TRUE; break; } pinInfo++; } } slotInfo++; } if (!valid) { HalPrint(("All links missing for bridge (b=%02X, d=%02X, s=%02X)!", slotInfo->BusNumber, slotInfo->DeviceNumber>>3, slotInfo->SlotNumber)); } } } else { UCHAR intLine; UCHAR intPin; // // Normal device. // if ((pciData->HeaderType & 0x7F) == PCI_CARDBUS_BRIDGE_TYPE) { intPin = pciData->u.type2.InterruptPin; intLine = pciData->u.type2.InterruptLine; } else { intPin = pciData->u.type0.InterruptPin; intLine = pciData->u.type0.InterruptLine; } if (intPin && intPin <= NUM_IRQ_PINS) { if ( !(pciData->Command & (PCI_ENABLE_IO_SPACE | PCI_ENABLE_MEMORY_SPACE)) || (intLine && intLine <= 0x0F)) { intPin--; slotInfo = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + sizeof(PCI_IRQ_ROUTING_TABLE)); lastSlot = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + PciIrqRoutingTable->TableSize); valid = FALSE; while (slotInfo < lastSlot) { if ( (slotInfo->DeviceNumber>>3) == (UCHAR)device && slotInfo->PinInfo[intPin].Link) { valid = TRUE; break; } slotInfo++; } if (!valid) { HalPrint(("Missing entry for device (b=%02X, d=%02X, s=%02X) in the IRQ routing table!", slotInfo->BusNumber, slotInfo->DeviceNumber>>3, slotInfo->SlotNumber)); } } } } } } // // Dont waste time if this is not a multifunction device or // device does not exist. // if ( (function == 0 && !(pciData->HeaderType & PCI_MULTIFUNCTION)) || pciData->HeaderType == 0xFF) { break; } } } } } if (!valid) { HalPrint (("Failing IRQ routing table. IRQ routing will be disabled")); } return (valid); } NTSTATUS HalpFindLinkNode ( IN PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo, IN PDEVICE_OBJECT Pdo, IN ULONG Bus, IN ULONG Slot, OUT PLINK_NODE *LinkNode ) { PINT_ROUTE_INTERFACE_STANDARD pciInterface; NTSTATUS status; ULONG dummy; UCHAR classCode; UCHAR subClassCode; ROUTING_TOKEN routingToken; PSLOT_INFO slotInfo; PLINK_NODE linkNode; UCHAR pin; PAGED_CODE(); ASSERT(IsPciIrqRoutingEnabled()); *LinkNode = NULL; pciInterface = PciIrqRoutingInfo->PciInterface; // // Call Pci driver to get info about the Pdo. // status = pciInterface->GetInterruptRouting( Pdo, &Bus, &Slot, (PUCHAR)&dummy, &pin, &classCode, &subClassCode, (PDEVICE_OBJECT *)&dummy, &routingToken, (PUCHAR)&dummy); // // This means that it is not a Pci device. // if (!NT_SUCCESS(status)) { return (STATUS_NOT_FOUND); } // // Pci Ide Irqs behave differently than other Pci devices. // if ( classCode == PCI_CLASS_MASS_STORAGE_CTLR && subClassCode == PCI_SUBCLASS_MSC_IDE_CTLR) { PBUS_HANDLER busHandler; PCI_SLOT_NUMBER slot; UCHAR buffer[PCI_COMMON_HDR_LENGTH]; PPCI_COMMON_CONFIG pciData = (PPCI_COMMON_CONFIG)&buffer[0]; BOOLEAN nativeMode = FALSE; // // Check for native mode IDE controller. // busHandler = HalpHandlerForBus(PCIBus, Bus); if (busHandler) { slot.u.AsULONG = Slot; HalpReadPCIConfig(busHandler, slot, pciData, 0, PCI_COMMON_HDR_LENGTH); if ( pciData->VendorID != 0xFFFF && pciData->DeviceID != 0xFFFF && pciData->BaseClass == classCode && pciData->SubClass == subClassCode) { // // Check if either channel is in native mode? // if (pciData->ProgIf & 0x05) { nativeMode = TRUE; } } } if (!nativeMode) { return (STATUS_RESOURCE_REQUIREMENTS_CHANGED); } } // // Have we cached this before? // if (routingToken.LinkNode != NULL) { ASSERT(((PLINK_NODE)routingToken.LinkNode)->Signature == PCI_LINK_SIGNATURE); *LinkNode = (PLINK_NODE)routingToken.LinkNode; return (STATUS_SUCCESS); } // // Get the slot info for this device. // slotInfo = HalpBarberPole( PciIrqRoutingInfo, Pdo, Bus, Slot, &pin); if (slotInfo != NULL) { ASSERT(pin <4); for ( linkNode = PciIrqRoutingInfo->LinkNodeHead; linkNode && linkNode->Link != slotInfo->PinInfo[pin].Link; linkNode = linkNode->Next); if (linkNode != NULL) { *LinkNode = linkNode; // // Initialize the routing token. // routingToken.LinkNode = linkNode; routingToken.StaticVector = 0; routingToken.Flags = 0; // // Save the routing token. // status = pciInterface->SetInterruptRoutingToken( Pdo, &routingToken); if (!NT_SUCCESS(status)) { HalPrint(("Failed to set Pci routing token!")); ASSERT(NT_SUCCESS(status)); } } } return (STATUS_SUCCESS); } PSLOT_INFO HalpBarberPole ( IN PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo, IN PDEVICE_OBJECT Pdo, IN ULONG Bus, IN ULONG Slot, IN OUT PUCHAR Pin ) /*++ Routine Description: This routine implements the "barber pole" algorithm to determine the interrupt pin for Pci devices behind bridges. Input Parameters: PciIrqRouting - Pci Irq Routing information. Pdo - Pci device object for which we barber pole. Pin - Interrupt pin for the Pci device entry in the routing table we reached. Return Value: Slot info for the specified device iff successful. --*/ { ULONG dummy; UCHAR pin; PDEVICE_OBJECT parent; ROUTING_TOKEN routingToken; BOOLEAN success; PSLOT_INFO slotInfo; NTSTATUS status; PINT_ROUTE_INTERFACE_STANDARD pciInterface; PAGED_CODE(); ASSERT(IsPciIrqRoutingEnabled()); pciInterface = PciIrqRoutingInfo->PciInterface; // // This device MUST be a PCI device with a valid interrupt pin. // status = pciInterface->GetInterruptRouting( Pdo, &Bus, &Slot, (PUCHAR)&dummy, &pin, (PUCHAR)&dummy, (PUCHAR)&dummy, &parent, &routingToken, (PUCHAR)&dummy); if (!NT_SUCCESS(status) || pin == 0) { return (NULL); } // // Normalize the pin. // pin--; success = TRUE; while (success) { slotInfo = HalpGetSlotInfo( PciIrqRoutingInfo->PciIrqRoutingTable, (UCHAR)Bus, (UCHAR)(Slot & 0x1F)); if (slotInfo != NULL) { break; } // // Get barber pole info for the parent. // success = HalpBarberPolePin( PciIrqRoutingInfo, parent, Bus, Slot & 0x1F, &pin); Bus = (ULONG)-1; Slot = (ULONG)-1; // // Get parent's info. // status = pciInterface->GetInterruptRouting( parent, &Bus, &Slot, (PUCHAR)&dummy, (PUCHAR)&dummy, (PUCHAR)&dummy, (PUCHAR)&dummy, &parent, &routingToken, (PUCHAR)&dummy); if (!NT_SUCCESS(status)) { success = FALSE; break; } } // // Return unsuccessfully if we encountered any weird error. // if (success == FALSE) slotInfo = NULL; if (slotInfo) { *Pin = pin; } return (slotInfo); } BOOLEAN HalpBarberPolePin ( IN PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo, IN PDEVICE_OBJECT Parent, IN ULONG Bus, IN ULONG Device, IN OUT PUCHAR Pin ) /*++ Routine Description: This routine returns the info used for barber poling. Input Parameters: PciIrqRoutingInfo - Pci Irq Routing information. Parent - Parent device object as we barber pole. Bus - Child device objects bus number. Device - Device number for the child device. Pin - Child device objects interrupt pin number (normalized) on entry. Return Value: TRUE iff successful. --*/ { ULONG parentBus; ULONG parentSlot; ULONG dummy; UCHAR parentPin; UCHAR classCode; UCHAR subClassCode; ROUTING_TOKEN routingToken; NTSTATUS status; PINT_ROUTE_INTERFACE_STANDARD pciInterface; PAGED_CODE(); ASSERT(IsPciIrqRoutingEnabled()); pciInterface = PciIrqRoutingInfo->PciInterface; // // Read the registry flags and see if this device supports straight // through routing. // // // Check if the pin table is present in the registry. // parentBus = (ULONG)-1; parentSlot = (ULONG)-1; // // Get info about the parent from Pci. // status = pciInterface->GetInterruptRouting( Parent, &parentBus, &parentSlot, (PUCHAR)&dummy, &parentPin, &classCode, &subClassCode, (PDEVICE_OBJECT *)&dummy, &routingToken, (PUCHAR)&dummy); if (NT_SUCCESS(status) && classCode == PCI_CLASS_BRIDGE_DEV) { switch (subClassCode) { case PCI_SUBCLASS_BR_PCI_TO_PCI: *Pin = (*Pin + (UCHAR)Device) % 4; break; case PCI_SUBCLASS_BR_CARDBUS: *Pin = parentPin - 1; break; default: HalPrint(("Pci device (bus=%02lx, slot=%02lx) does not have a PCI bridge as its parent!", Bus, Device)); ASSERT(FALSE); return (FALSE); } } return (TRUE); } PSLOT_INFO HalpGetSlotInfo ( IN PPCI_IRQ_ROUTING_TABLE PciIrqRoutingTable, IN UCHAR Bus, IN UCHAR Device ) /*++ Routine Description: This routine searches the Pci Irq Routing Table for an entry for the specified Pci device on the given bus number. Input Parameters: PciIrqRoutingInfo - Pci Irq Routing information. Bus - Bus number of the Pci device. Device - Device number of the Pci device. Return Value: Pointer to the slot info for the specified device iff successful. --*/ { PSLOT_INFO slotInfo; PSLOT_INFO lastSlot; PAGED_CODE(); ASSERT(IsPciIrqRoutingEnabled()); // // Process all slots in this table. // slotInfo = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + sizeof(PCI_IRQ_ROUTING_TABLE)); lastSlot = (PSLOT_INFO)((PUCHAR)PciIrqRoutingTable + PciIrqRoutingTable->TableSize); while (slotInfo < lastSlot) { if ( slotInfo->BusNumber == Bus && (slotInfo->DeviceNumber >> 3) == Device) { return (slotInfo); } slotInfo++; } return (NULL); } NTSTATUS HalpReadRegistryValue ( IN HANDLE Root, IN const WCHAR* KeyName, IN const WCHAR* ValueName, OUT PULONG Data ) /*++ Routine Description: Reads the value for the valuename under the key specified. Input Parameters: Root is the handle of the root if any. KeyName is the name of the key under which this value appears. ValueName is the name of the value to be read. Data is the variable that receives the value read. Return Value: Standard NT status value. --*/ { UNICODE_STRING valueName; HANDLE hKey; NTSTATUS status; UCHAR buffer[sizeof(KEY_VALUE_FULL_INFORMATION) + MAXIMUM_VALUE_NAME_LENGTH + sizeof(ULONG)]; ULONG cbData; UNICODE_STRING keyName; PAGED_CODE(); RtlInitUnicodeString( &keyName, KeyName); status = HalpOpenRegistryKey(&hKey, Root, &keyName, KEY_READ, FALSE); if (NT_SUCCESS(status)) { RtlInitUnicodeString(&valueName, ValueName); status = ZwQueryValueKey( hKey, &valueName, KeyValueFullInformation, &buffer[0], sizeof(buffer), &cbData); if (NT_SUCCESS(status)) { *Data = *(PULONG)((PUCHAR)&buffer[0] + ((PKEY_VALUE_FULL_INFORMATION)&buffer[0])->DataOffset); } ZwClose(hKey); } return (status); } NTSTATUS HalpWriteRegistryValue ( IN HANDLE Root, IN const WCHAR* KeyName, IN const WCHAR* ValueName, IN ULONG Value ) /*++ Routine Description: Writes the value for the valuename under the key specified. Input Parameters: Root is the handle of the root if any. KeyName is the name of the key under which this value appears. ValueName is the name of the value to be written. Value is the value to be written. Return Value: Standard NT status value. --*/ { NTSTATUS status; UNICODE_STRING valueName; HANDLE hKey; UNICODE_STRING keyName; PAGED_CODE(); RtlInitUnicodeString(&keyName, KeyName); status = HalpOpenRegistryKey(&hKey, Root, &keyName, KEY_ALL_ACCESS, FALSE); if (NT_SUCCESS(status)) { RtlInitUnicodeString(&valueName, ValueName); status = ZwSetValueKey( hKey, &valueName, 0, REG_DWORD, &Value, sizeof(Value)); ZwClose(hKey); } return (status); } NTSTATUS HalpCommitLink ( IN PLINK_NODE LinkNode ) { NTSTATUS status; ULONG interrupt; PLINK_STATE temp; // // Read the current state of this link. // interrupt = 0; status = PciirqmpGetIrq((PUCHAR)&interrupt, (UCHAR)LinkNode->Link); if (LinkNode->PossibleAllocation->RefCount) { // // Program the link. // if (NT_SUCCESS(status) && interrupt != LinkNode->PossibleAllocation->Interrupt) { PciirqmpSetIrq((UCHAR)LinkNode->PossibleAllocation->Interrupt, (UCHAR)LinkNode->Link); } } else if (LinkNode->Allocation->RefCount) { // // Disable the link. // if (NT_SUCCESS(status) && interrupt) { PciirqmpSetIrq((UCHAR)0, (UCHAR)LinkNode->Link); } } #if defined(NEC_98) else if (!(LinkNode->PossibleAllocation->Interrupt)) { // // Disable the link. // PciirqmpSetIrq((UCHAR)0, (UCHAR)LinkNode->Link); } #endif // // Swap the possible with the allocation. // temp = LinkNode->Allocation; LinkNode->Allocation = LinkNode->PossibleAllocation; LinkNode->PossibleAllocation = temp; return (STATUS_SUCCESS); } VOID HalpProgramInterruptLine ( IN PPCI_IRQ_ROUTING_INFO PciIrqRoutingInfo, IN PDEVICE_OBJECT Pdo, IN ULONG Interrupt ) { PAGED_CODE(); // // We should never be here if Pci Irq routing is not enabled. // ASSERT(IsPciIrqRoutingEnabled()); PciIrqRoutingInfo->PciInterface->UpdateInterruptLine(Pdo, (UCHAR)Interrupt); }