//====== Assertion/Debug output APIs ================================= #include // for __endexcept #pragma warning (disable:4096) // '__cdecl' must be used with '...' #pragma warning (disable:4201) // nonstandard extension used : nameless struct/union #pragma warning (disable:4115) // named type definition in parentheses #if defined(DECLARE_DEBUG) && defined(DEBUG) // // Declare module-specific debug strings // // When including this header in your private header file, do not // define DECLARE_DEBUG. But do define DECLARE_DEBUG in one of the // source files in your project, and then include this header file. // // You may also define the following: // // SZ_DEBUGINI - the .ini file used to set debug flags // SZ_DEBUGSECTION - the section in the .ini file specific to // the module component. // SZ_MODULE - ansi version of the name of your module. // // // (These are deliberately CHAR) EXTERN_C const CHAR FAR c_szCcshellIniFile[] = SZ_DEBUGINI; EXTERN_C const CHAR FAR c_szCcshellIniSecDebug[] = SZ_DEBUGSECTION; EXTERN_C const WCHAR FAR c_wszTrace[] = L"t " TEXTW(SZ_MODULE) L" "; EXTERN_C const WCHAR FAR c_wszErrorDbg[] = L"err " TEXTW(SZ_MODULE) L" "; EXTERN_C const WCHAR FAR c_wszWarningDbg[] = L"wn " TEXTW(SZ_MODULE) L" "; EXTERN_C const WCHAR FAR c_wszAssertMsg[] = TEXTW(SZ_MODULE) L" Assert: "; EXTERN_C const WCHAR FAR c_wszAssertFailed[] = TEXTW(SZ_MODULE) L" Assert %ls, line %d: (%ls)\r\n"; EXTERN_C const WCHAR FAR c_wszRip[] = TEXTW(SZ_MODULE) L" RIP in %s at %s, line %d: (%s)\r\n"; EXTERN_C const WCHAR FAR c_wszRipNoFn[] = TEXTW(SZ_MODULE) L" RIP at %s, line %d: (%s)\r\n"; // (These are deliberately CHAR) EXTERN_C const CHAR FAR c_szTrace[] = "t " SZ_MODULE " "; EXTERN_C const CHAR FAR c_szErrorDbg[] = "err " SZ_MODULE " "; EXTERN_C const CHAR FAR c_szWarningDbg[] = "wn " SZ_MODULE " "; EXTERN_C const CHAR FAR c_szAssertMsg[] = SZ_MODULE " Assert: "; EXTERN_C const CHAR FAR c_szAssertFailed[] = SZ_MODULE " Assert %s, line %d: (%s)\r\n"; EXTERN_C const CHAR FAR c_szRip[] = SZ_MODULE " RIP in %s at %s, line %d: (%s)\r\n"; EXTERN_C const CHAR FAR c_szRipNoFn[] = SZ_MODULE " RIP at %s, line %d: (%s)\r\n"; EXTERN_C const CHAR FAR c_szRipMsg[] = SZ_MODULE " RIP: "; #endif // DECLARE_DEBUG && DEBUG #if defined(DECLARE_DEBUG) && defined(PRODUCT_PROF) EXTERN_C const CHAR FAR c_szCcshellIniFile[] = SZ_DEBUGINI; EXTERN_C const CHAR FAR c_szCcshellIniSecDebug[] = SZ_DEBUGSECTION; #endif #ifdef __cplusplus extern "C" { #endif #if !defined(DECLARE_DEBUG) // // Debug macros and validation code // #if !defined(UNIX) || (defined(UNIX) && !defined(NOSHELLDEBUG)) // Undefine the macros that we define in case some other header // might have tried defining these commonly-named macros. #undef Assert #undef AssertE #undef AssertMsg #undef AssertStrLen #undef DebugMsg #undef FullDebugMsg #undef ASSERT #undef EVAL #undef ASSERTMSG // catch people's typos #undef DBEXEC #ifdef _ATL_NO_DEBUG_CRT #undef _ASSERTE // we substitute this ATL macro #endif #endif // !UNIX // Access these globals to determine which debug flags are set. // These globals are modified by CcshellGetDebugFlags(), which // reads an .ini file and sets the appropriate flags. // // g_dwDumpFlags - bits are application specific. Typically // used for dumping structures. // g_dwBreakFlags - uses BF_* flags. The remaining bits are // application specific. Used to determine // when to break into the debugger. // g_qwTraceFlags - uses TF_* flags. The remaining bits are // application specific. Used to display // debug trace messages. // g_dwFuncTraceFlags - bits are application specific. When // TF_FUNC is set, CcshellFuncMsg uses this // value to determine which function traces // to display. // g_dwProtoype - bits are application specific. Use it for // anything. // g_dwProfileCAP - bits are application specific. Used to // control ICECAP profiling. // extern DWORD g_dwDumpFlags; extern DWORD g_dwBreakFlags; extern ULONGLONG g_qwTraceFlags; #ifdef DEBUG extern DWORD g_dwPrototype; #else #define g_dwPrototype 0 #endif extern DWORD g_dwFuncTraceFlags; #if defined(DEBUG) || defined(PRODUCT_PROF) BOOL CcshellGetDebugFlags(void); #else #define CcshellGetDebugFlags() 0 #endif // Break flags for g_dwBreakFlags #define BF_ASSERT 0x00000001 // Break on assertions #define BF_ONAPIENTER 0x00000002 // Break on entering an API #define BF_ONERRORMSG 0x00000004 // Break on TF_ERROR #define BF_ONWARNMSG 0x00000008 // Break on TF_WARNING #define BF_THR 0x00000100 // Break when THR() receives a failure #define BF_RIP 0x00000200 // Break on RIPs #define BF_LEAKS 0x80000000 // Break on detecting a leak // Trace flags for g_qwTraceFlags #define TF_ALWAYS 0xFFFFFFFFFFFFFFFF #define TF_NEVER 0x00000000 #define TF_WARNING 0x00000001 #define TF_ERROR 0x00000002 #define TF_GENERAL 0x00000004 // Standard messages #define TF_FUNC 0x00000008 // Trace function calls #define TF_ATL 0x00000008 // Since TF_FUNC is so-little used, I'm overloading this bit #define TF_MEMUSAGE 0x0000000100000000 #define TF_KEEP_ALLOCATION_STACKS 0x0000000200000000 // (Upper 28 bits reserved for custom use per-module) #define TF_CUSTOM1 0x40000000 // Custom messages #1 #define TF_CUSTOM2 0x80000000 // Custom messages #2 // Old, archaic debug flags. // APPCOMPAT (scotth): the following flags will be phased out over time. #ifdef DM_TRACE #undef DM_TRACE #undef DM_WARNING #undef DM_ERROR #endif #define DM_TRACE TF_GENERAL // OBSOLETE Trace messages #define DM_WARNING TF_WARNING // OBSOLETE Warning #define DM_ERROR TF_ERROR // OBSOLETE Error // Use this macro to declare message text that will be placed // in the CODE segment (useful if DS is getting full) // // Ex: DEBUGTEXT(szMsg, "Invalid whatever: %d"); // #define DEBUGTEXT(sz, msg) /* ;Internal */ \ static const TCHAR sz[] = msg #ifndef NOSHELLDEBUG // Others have own versions of these. #ifdef DEBUG void AttachUserModeDebugger (void); #ifdef _X86_ // Use int 3 so we stop immediately in the source #define DEBUG_BREAK \ { \ static BOOL gAlwaysAssert = FALSE; \ AttachUserModeDebugger(); \ do \ { \ _try \ { \ _asm int 3 \ } \ _except (EXCEPTION_EXECUTE_HANDLER) \ { \ } \ } while (gAlwaysAssert); \ } #else #define DEBUG_BREAK \ { \ static BOOL gAlwaysAssert = FALSE; \ AttachUserModeDebugger(); \ do \ { \ _try \ { \ DebugBreak(); \ } \ _except (EXCEPTION_EXECUTE_HANDLER) \ { \ } \ __endexcept \ } while (gAlwaysAssert); \ } #endif // Prototypes for debug functions void CcshellStackEnter(void); void CcshellStackLeave(void); void CDECL CcshellFuncMsgW(ULONGLONG mask, LPCSTR pszMsg, ...); void CDECL CcshellFuncMsgA(ULONGLONG mask, LPCSTR pszMsg, ...); void CDECL _AssertMsgA(BOOL f, LPCSTR pszMsg, ...); void CDECL _AssertMsgW(BOOL f, LPCWSTR pszMsg, ...); void _AssertStrLenA(LPCSTR pszStr, int iLen); void _AssertStrLenW(LPCWSTR pwzStr, int iLen); #ifdef UNICODE #define CcshellFuncMsg CcshellFuncMsgW #define CcshellAssertMsg CcshellAssertMsgW #define _AssertMsg _AssertMsgW #define _AssertStrLen _AssertStrLenW #else #define CcshellFuncMsg CcshellFuncMsgA #define CcshellAssertMsg CcshellAssertMsgA #define _AssertMsg _AssertMsgA #define _AssertStrLen _AssertStrLenA #endif #endif // DEBUG // ASSERT(f) // // Generates a "Assert file.c, line x (eval)" message if f is NOT true. // // Use ASSERT() to check for logic invariance. These are typically considered // fatal problems, and falls into the 'this should never ever happen' // category. // // Do *not* use ASSERT() to verify successful API calls if the APIs can // legitimately fail due to low resources. For example, LocalAlloc can // legally fail, so you shouldn't assert that it will never fail. // // The BF_ASSERT bit in g_dwBreakFlags governs whether the function // performs a DebugBreak(). // // Default Behavior- // Retail builds: nothing // Debug builds: spew and break // Full debug builds: spew and break // #ifdef DEBUG BOOL CcshellAssertFailedA(LPCSTR szFile, int line, LPCSTR pszEval, BOOL bBreakInside); BOOL CcshellAssertFailedW(LPCWSTR szFile, int line, LPCWSTR pwszEval, BOOL bBreakInside); #ifdef UNICODE #define CcshellAssertFailed CcshellAssertFailedW #else #define CcshellAssertFailed CcshellAssertFailedA #endif #define ASSERT(f) \ { \ DEBUGTEXT(szFile, TEXT(__FILE__)); \ if (!(f) && CcshellAssertFailed(szFile, __LINE__, TEXT(#f), FALSE)) \ DEBUG_BREAK; \ } // The old Win95 code used to use "Assert()". We discourage the use // of this macro now because it is not msdev-friendly. #ifdef DISALLOW_Assert #define Assert(f) Dont_use_Assert___Use_ASSERT #else #define Assert(f) ASSERT(f) #endif #else // DEBUG #define ASSERT(f) #define Assert(f) #endif // DEBUG // ASSERTMSG(f, szFmt, args...) // // Behaves like ASSERT, except it prints the wsprintf-formatted message // instead of the file and line number. // // The sz parameter is always ANSI; AssertMsg correctly converts it // to unicode if necessary. This is so you don't have to wrap your // debug strings with TEXT(). // // The BF_ASSERT bit in g_dwBreakFlags governs whether the function // performs a DebugBreak(). // // Default Behavior- // Retail builds: nothing // Debug builds: spew and break // Full debug builds: spew and break // #ifdef DEBUG void CDECL CcshellAssertMsgW(BOOL bAssert, LPCSTR pszMsg, ...); void CDECL CcshellAssertMsgA(BOOL bAssert, LPCSTR pszMsg, ...); #ifdef UNICODE #define CcshellAssertMsg CcshellAssertMsgW #else #define CcshellAssertMsg CcshellAssertMsgA #endif #define ASSERTMSG CcshellAssertMsg #else // DEBUG #define ASSERTMSG 1 ? (void)0 : (void) #endif // DEBUG // EVAL(f) // // Behaves like ASSERT(). Evaluates the expression (f). The expression // is always evaluated, even in retail builds. But the macro only asserts // in the debug build. This macro may be used on logical expressions, eg: // // if (EVAL(exp)) // // do something // // Do *not* use EVAL() to verify successful API calls if the APIs can // legitimately fail due to low resources. For example, LocalAlloc can // legally fail, so you shouldn't assert that it will never fail. // // The BF_ASSERT bit in g_dwBreakFlags governs whether the function // performs a DebugBreak(). // // Default Behavior- // Retail builds: nothing // Debug builds: spew and break // Full debug builds: spew and break // #ifdef DEBUG #define EVAL(exp) \ ((exp) || (CcshellAssertFailed(TEXT(__FILE__), __LINE__, TEXT(#exp), TRUE), 0)) #else // DEBUG #define EVAL(exp) ((exp) != 0) #endif // DEBUG // RIP(f) // // Generates a "RIP at file.c, line x (eval)" message if f is NOT true. // // Use RIP() to perform parameter validation, especially when you // know the function or method may be called by a 3rd party app. // Typically, RIPs are used to indicate the caller passed in an invalid // parameter, so the problem is really not in the code itself. // // Do *not* use RIP() to verify successful API calls if the APIs can // legitimately fail due to low resources. For example, LocalAlloc can // legally fail, so you shouldn't assert that it will never fail. // // RIP performs a debugbreak only in the following processes: // // explore.exe // iexplore.exe // rundll32.exe // welcome.exe // // In any other process, this just spews the debug message, but doesn't stop. // // Setting the BF_RIP bit in g_dwBreakFlags will cause the macro to perform // a DebugBreak() even in non-shell processes. // // Default Behavior- // Retail builds: nothing // Debug builds: spew (other processes), spew and break (shell processes) // Full debug builds: spew (other processes), spew and break (shell processes) // #ifdef DEBUG BOOL CcshellRipA(LPCSTR pszFile, int line, LPCSTR pszEval, BOOL bBreakInside); BOOL CcshellRipW(LPCWSTR pszFile, int line, LPCWSTR pwszEval, BOOL bBreakInside); BOOL CDECL CcshellRipMsgA(BOOL bRip, LPCSTR pszMsg, ...); BOOL CDECL CcshellRipMsgW(BOOL bRip, LPCSTR pszMsg, ...); #ifdef UNICODE #define CcshellRip CcshellRipW #define CcshellRipMsg CcshellRipMsgW #else #define CcshellRip CcshellRipA #define CcshellRipMsg CcshellRipMsgA #endif #define RIP(f) \ { \ DEBUGTEXT(szFile, TEXT(__FILE__)); \ if (!(f) && CcshellRip(szFile, __LINE__, TEXT(#f), FALSE)) \ { \ DEBUG_BREAK; \ } \ } \ #define RIPMSG CcshellRipMsg #else // DEBUG #define RIP(f) #define RIPMSG 1 ? (void)0 : (void) #endif // DEBUG // TraceMsg(dwMask, sz, args...) // // Generate wsprintf-formatted message using the specified trace dwMask. // dwMask may be one of the predefined bits: // // TF_ERROR - display "err " // TF_WARNING - display "wn " // TF_GENERAL - display "t " // TF_ALWAYS - display "t " regardless of g_qwTraceFlags. // // or it may be a custom bit (any of the upper 28 bits). // // The g_qwTraceFlags global governs whether the message is displayed (based // upon the dwMask parameter). // // The sz parameter is always ANSI; TraceMsg correctly converts it // to unicode if necessary. This is so you don't have to wrap your // debug strings with TEXT(). // // In addition to squirting the trace message, you may optionally cause // the trace message to stop if you need to trace down the source of // an error. The BF_ONERRORMSG and BF_ONWARNMSG bits may be set in // g_dwBreakFlags to make TraceMsg stop when a TF_ERROR or TF_WARNING // message is displayed. But typically these bits are disabled. // // Default Behavior- // Retail builds: nothing // Debug builds: only TF_ALWAYS and TF_ERROR messages spew // Full debug builds: spew // #ifdef DEBUG UINT GetStack(UINT nDepth, CHAR *szBuffer, UINT nBufferLength); void CDECL CcshellDebugMsgW(ULONGLONG mask, LPCSTR pszMsg, ...); void CDECL CcshellDebugMsgA(ULONGLONG mask, LPCSTR pszMsg, ...); void CDECL _DebugMsgA(ULONGLONG flag, LPCSTR psz, ...); void CDECL _DebugMsgW(ULONGLONG flag, LPCWSTR psz, ...); #ifdef UNICODE #define CcshellDebugMsg CcshellDebugMsgW #define _DebugMsg _DebugMsgW #else #define CcshellDebugMsg CcshellDebugMsgA #define _DebugMsg _DebugMsgA #endif #define TraceMsgW CcshellDebugMsgW #define TraceMsgA CcshellDebugMsgA #define TraceMsg CcshellDebugMsg // Use TraceMsg instead of DebugMsg. DebugMsg is obsolete. #ifdef DISALLOW_DebugMsg #define DebugMsg Dont_use_DebugMsg___Use_TraceMsg #else #define DebugMsg _DebugMsg #endif #else // DEBUG #define TraceMsgA 1 ? (void)0 : (void) #define TraceMsgW 1 ? (void)0 : (void) #define TraceMsg 1 ? (void)0 : (void) #define DebugMsg 1 ? (void)0 : (void) #endif // DEBUG // THR(pfn) // TBOOL(pfn) // TINT(pfn) // TPTR(pfn) // TW32(pfn) // // These macros are useful to trace failed calls to functions that return // HRESULTs, BOOLs, ints, or pointers. An example use of this is: // // { // ... // hres = THR(CoCreateInstance(CLSID_Bar, NULL, CLSCTX_INPROC_SERVER, // IID_IBar, (LPVOID*)&pbar)); // if (SUCCEEDED(hres)) // ... // } // // If CoCreateInstance failed, you would see spew similar to: // // err MODULE THR: Failure of "CoCreateInstance(CLSID_Bar, NULL, CLSCTX_INPROC_SERVER, IID_IBar, (LPVOID*)&pbar)" at foo.cpp, line 100 (0x80004005) // // THR keys off of the failure code of the hresult. // TBOOL considers FALSE to be a failure case. // TINT considers -1 to be a failure case. // TPTR considers NULL to be a failure case. // TW32 keys off the failure code of the Win32 error code. // // Set the BF_THR bit in g_dwBreakFlags to stop when these macros see a failure. // // Default Behavior- // Retail builds: nothing // Debug builds: nothing // Full debug builds: spew on error // #ifdef DEBUG EXTERN_C HRESULT TraceHR(HRESULT hrTest, LPCSTR pszExpr, LPCSTR pszFile, int iLine); EXTERN_C BOOL TraceBool(BOOL bTest, LPCSTR pszExpr, LPCSTR pszFile, int iLine); EXTERN_C int TraceInt(int iTest, LPCSTR pszExpr, LPCSTR pszFile, int iLine); EXTERN_C LPVOID TracePtr(LPVOID pvTest, LPCSTR pszExpr, LPCSTR pszFile, int iLine); EXTERN_C DWORD TraceWin32(DWORD dwTest, LPCSTR pszExpr, LPCSTR pszFile, int iLine); #define THR(x) (TraceHR((x), #x, __FILE__, __LINE__)) #define TBOOL(x) (TraceBool((x), #x, __FILE__, __LINE__)) #define TINT(x) (TraceInt((x), #x, __FILE__, __LINE__)) #define TPTR(x) (TracePtr((x), #x, __FILE__, __LINE__)) #define TW32(x) (TraceWin32((x), #x, __FILE__, __LINE__)) #else // DEBUG #define THR(x) (x) #define TBOOL(x) (x) #define TINT(x) (x) #define TPTR(x) (x) #define TW32(x) (x) #endif // DEBUG // DBEXEC(flg, expr) // // under DEBUG, does "if (flg) expr;" (w/ the usual safe syntax) // under !DEBUG, does nothing (and does not evaluate either of its args) // #ifdef DEBUG #define DBEXEC(flg, expr) ((flg) ? (expr) : 0) #else // DEBUG #define DBEXEC(flg, expr) /*NOTHING*/ #endif // DEBUG // string and buffer whacking functions // #ifdef DEBUG EXTERN_C void DEBUGWhackPathBufferA(LPSTR psz, UINT cch); EXTERN_C void DEBUGWhackPathBufferW(LPWSTR psz, UINT cch); EXTERN_C void DEBUGWhackPathStringA(LPSTR psz, UINT cch); EXTERN_C void DEBUGWhackPathStringW(LPWSTR psz, UINT cch); #else // DEBUG #define DEBUGWhackPathBufferA(psz, cch) #define DEBUGWhackPathBufferW(psz, cch) #define DEBUGWhackPathStringA(psz, cch) #define DEBUGWhackPathStringW(psz, cch) #endif // DEBUG #ifdef UNICODE #define DEBUGWhackPathBuffer DEBUGWhackPathBufferW #define DEBUGWhackPathString DEBUGWhackPathStringW #else #define DEBUGWhackPathBuffer DEBUGWhackPathBufferA #define DEBUGWhackPathString DEBUGWhackPathStringA #endif // Some trickery to map ATL debug macros to ours, so ATL code that stops // or spews in our code will look like the rest of our squirties. #ifdef DEBUG #ifdef _ATL_NO_DEBUG_CRT // ATL uses _ASSERTE. Map it to ours. #define _ASSERTE(f) ASSERT(f) // We map ATLTRACE macros to our functions void _cdecl ShellAtlTraceA(LPCSTR lpszFormat, ...); void _cdecl ShellAtlTraceW(LPCWSTR lpszFormat, ...); #ifdef UNICODE #define ShellAtlTrace ShellAtlTraceW #else #define ShellAtlTrace ShellAtlTraceA #endif // These are turned off because they normally don't give // feedback of error cases and so many fire that they // swamp out other useful debug spew. //#define ATLTRACE ShellAtlTrace #endif #else // DEBUG #ifdef _ATL_NO_DEBUG_CRT // ATL uses _ASSERTE. Map it to ours. #define _ASSERTE(f) // We map ATLTRACE macros to our functions #define ATLTRACE 1 ? (void)0 : (void) #define ATLTRACE2 1 ? (void)0 : (void) #endif #endif // DEBUG // ------ Stay away from these macros below ---------- // APPCOMPAT (scotth): remove these by 8/15/98. They should not be used anymore. #ifdef DEBUG #define AssertE(f) ASSERT(f) #define AssertMsg _AssertMsg #define AssertStrLen _AssertStrLen #define AssertStrLenA _AssertStrLenA #define AssertStrLenW _AssertStrLenW #ifdef FULL_DEBUG #define FullDebugMsg _DebugMsg #else #define FullDebugMsg 1 ? (void)0 : (void) #endif #define ASSERT_MSGW CcshellAssertMsgW #define ASSERT_MSGA CcshellAssertMsgA #define ASSERT_MSG CcshellAssertMsg #else // DEBUG #define AssertE(f) (f) #define AssertMsg 1 ? (void)0 : (void) #define AssertStrLen(lpStr, iLen) #define FullDebugMsg 1 ? (void)0 : (void) #define ASSERT_MSGA 1 ? (void)0 : (void) #define ASSERT_MSGW 1 ? (void)0 : (void) #define ASSERT_MSG 1 ? (void)0 : (void) #endif // DEBUG // ------ Stay away from these macros above ---------- // It's necessary to find when classes that were designed to be single threaded are used // across threads so they can be fixed to be multithreaded. These asserts will point // out such cases. #ifdef DEBUG #define ASSERT_SINGLE_THREADED AssertMsg(_dwThreadIDForSingleThreadedAssert == GetCurrentThreadId(), TEXT("MULTI-THREADED BUG: This class is being used by more than one thread, but it's not thread safe.")) #define INIT_SINGLE_THREADED_ASSERT _dwThreadIDForSingleThreadedAssert = GetCurrentThreadId(); #define SINGLE_THREADED_MEMBER_VARIABLE DWORD _dwThreadIDForSingleThreadedAssert; #else // DEBUG #define ASSERT_SINGLE_THREADED NULL; #define INIT_SINGLE_THREADED_ASSERT NULL; #define SINGLE_THREADED_MEMBER_VARIABLE #endif // DEBUG #ifdef DEBUG #define Dbg_SafeStrA(psz) (SAFECAST(psz, LPCSTR), (psz) ? (psz) : "NULL string") #define Dbg_SafeStrW(psz) (SAFECAST(psz, LPCWSTR), (psz) ? (psz) : L"NULL string") #ifdef UNICODE #define Dbg_SafeStr Dbg_SafeStrW #else #define Dbg_SafeStr Dbg_SafeStrA #endif #define FUNC_MSG CcshellFuncMsg // Helpful macro for mapping manifest constants to strings. Assumes // return string is pcsz. You can use this macro in this fashion: // // LPCSTR Dbg_GetFoo(FOO foo) // { // LPCTSTR pcsz = TEXT("Unknown "); // switch (foo) // { // STRING_CASE(FOOVALUE1); // STRING_CASE(FOOVALUE2); // ... // } // return pcsz; // } // #define STRING_CASE(val) case val: pcsz = TEXT(#val); break // Debug function enter // DBG_ENTER(flag, fn) -- Generates a function entry debug spew for // a function // #define DBG_ENTER(flagFTF, fn) \ (FUNC_MSG(flagFTF, " > " #fn "()"), \ CcshellStackEnter()) // DBG_ENTER_TYPE(flag, fn, dw, pfnStrFromType) -- Generates a function entry debug // spew for functions that accept . // #define DBG_ENTER_TYPE(flagFTF, fn, dw, pfnStrFromType) \ (FUNC_MSG(flagFTF, " < " #fn "(..., %s, ...)", (LPCTSTR)pfnStrFromType(dw)), \ CcshellStackEnter()) // DBG_ENTER_SZ(flag, fn, sz) -- Generates a function entry debug spew for // a function that accepts a string as one of its // parameters. // #define DBG_ENTER_SZ(flagFTF, fn, sz) \ (FUNC_MSG(flagFTF, " > " #fn "(..., \"%s\",...)", Dbg_SafeStr(sz)), \ CcshellStackEnter()) // Debug function exit // DBG_EXIT(flag, fn) -- Generates a function exit debug spew // #define DBG_EXIT(flagFTF, fn) \ (CcshellStackLeave(), \ FUNC_MSG(flagFTF, " < " #fn "()")) // DBG_EXIT_TYPE(flag, fn, dw, pfnStrFromType) -- Generates a function exit debug // spew for functions that return . // #define DBG_EXIT_TYPE(flagFTF, fn, dw, pfnStrFromType) \ (CcshellStackLeave(), \ FUNC_MSG(flagFTF, " < " #fn "() with %s", (LPCTSTR)pfnStrFromType(dw))) // DBG_EXIT_INT(flag, fn, us) -- Generates a function exit debug spew for // functions that return an INT. // #define DBG_EXIT_INT(flagFTF, fn, n) \ (CcshellStackLeave(), \ FUNC_MSG(flagFTF, " < " #fn "() with %d", (int)(n))) // DBG_EXIT_BOOL(flag, fn, b) -- Generates a function exit debug spew for // functions that return a boolean. // #define DBG_EXIT_BOOL(flagFTF, fn, b) \ (CcshellStackLeave(), \ FUNC_MSG(flagFTF, " < " #fn "() with %s", (b) ? (LPTSTR)TEXT("TRUE") : (LPTSTR)TEXT("FALSE"))) // DBG_EXIT_UL(flag, fn, ul) -- Generates a function exit debug spew for // functions that return a ULONG. // #ifdef _WIN64 #define DBG_EXIT_UL(flagFTF, fn, ul) \ (CcshellStackLeave(), \ FUNC_MSG(flagFTF, " < " #fn "() with %#016I64x", (ULONG_PTR)(ul))) #else #define DBG_EXIT_UL(flagFTF, fn, ul) \ (CcshellStackLeave(), \ FUNC_MSG(flagFTF, " < " #fn "() with %#08lx", (ULONG)(ul))) #endif // _WIN64 #define DBG_EXIT_DWORD DBG_EXIT_UL // DBG_EXIT_HRES(flag, fn, hres) -- Generates a function exit debug spew for // functions that return an HRESULT. // #define DBG_EXIT_HRES(flagFTF, fn, hres) DBG_EXIT_TYPE(flagFTF, fn, hres, Dbg_GetHRESULTName) #else // DEBUG #define Dbg_SafeStr 1 ? (void)0 : (void) #define FUNC_MSG 1 ? (void)0 : (void) #define DBG_ENTER(flagFTF, fn) #define DBG_ENTER_TYPE(flagFTF, fn, dw, pfn) #define DBG_ENTER_SZ(flagFTF, fn, sz) #define DBG_EXIT(flagFTF, fn) #define DBG_EXIT_INT(flagFTF, fn, n) #define DBG_EXIT_BOOL(flagFTF, fn, b) #define DBG_EXIT_UL(flagFTF, fn, ul) #define DBG_EXIT_DWORD DBG_EXIT_UL #define DBG_EXIT_TYPE(flagFTF, fn, dw, pfn) #define DBG_EXIT_HRES(flagFTF, fn, hres) #endif // DEBUG // COMPILETIME_ASSERT(f) // // Generates a build break at compile time if the constant expression // is not true. Unlike the "#if" compile-time directive, the expression // in COMPILETIME_ASSERT() is allowed to use "sizeof". // // Compiler magic! If the expression "f" is FALSE, then you get the // compiler error "Duplicate case expression in switch statement". // #define COMPILETIME_ASSERT(f) switch (0) case 0: case f: #else // NOSHELLDEBUG #ifdef UNIX #include #define ASSERT(f) _ASSERT(f) #include #define TraceMsg(type, sformat) DebugMessage(0, sformat) #define TraceMSG(type, sformat, args) DebugMessage(0, sformat, args) #endif #endif // NOSHELLDEBUG // // Debug dump helper functions // #ifdef DEBUG LPCTSTR Dbg_GetCFName(UINT ucf); LPCTSTR Dbg_GetHRESULTName(HRESULT hr); LPCTSTR Dbg_GetREFIIDName(REFIID riid); LPCTSTR Dbg_GetVTName(VARTYPE vt); #else #define Dbg_GetCFName(ucf) (void)0 #define Dbg_GetHRESULTName(hr) (void)0 #define Dbg_GetREFIIDName(riid) (void)0 #define Dbg_GetVTName(vt) (void)0 #endif // DEBUG // I'm a lazy typist... #define Dbg_GetHRESULT Dbg_GetHRESULTName // Parameter validation macros #include "validate.h" #endif // DECLARE_DEBUG #ifdef PRODUCT_PROF int __stdcall StartCAP(void); // start profiling int __stdcall StopCAP(void); // stop profiling until StartCAP int __stdcall SuspendCAP(void); // suspend profiling until ResumeCAP int __stdcall ResumeCAP(void); // resume profiling int __stdcall StartCAPAll(void); // process-wide start profiling int __stdcall StopCAPAll(void); // process-wide stop profiling int __stdcall SuspendCAPAll(void); // process-wide suspend profiling int __stdcall ResumeCAPAll(void); // process-wide resume profiling void __stdcall MarkCAP(long lMark); // write mark to MEA extern DWORD g_dwProfileCAP; #else #define StartCAP() 0 #define StopCAP() 0 #define SuspendCAP() 0 #define ResumeCAP() 0 #define StartCAPAll() 0 #define StopCAPAll() 0 #define SuspendCAPAll() 0 #define ResumeCAPAll() 0 #define MarkCAP(n) 0 #define g_dwProfileCAP 0 #endif #ifdef __cplusplus }; #endif