/******************************Module*Header*******************************\ * Module Name: bitblt.c * * Contains the high-level DrvBitBlt and DrvCopyBits functions. The low- * level stuff lives in the 'blt??.c' files. * * !!! Change note about 'iType' * * Note: Since we've implemented device-bitmaps, any surface that GDI passes * to us can have 3 values for its 'iType': STYPE_BITMAP, STYPE_DEVICE * or STYPE_DEVBITMAP. We filter device-bitmaps that we've stored * as DIBs fairly high in the code, so after we adjust its 'pptlSrc', * we can treat STYPE_DEVBITMAP surfaces the same as STYPE_DEVICE * surfaces (e.g., a blt from an off-screen device bitmap to the screen * gets treated as a normal screen-to-screen blt). So throughout * this code, we will compare a surface's 'iType' to STYPE_BITMAP: * if it's equal, we've got a true DIB, and if it's unequal, we have * a screen-to-screen operation. * * Copyright (c) 1992-1995 Microsoft Corporation \**************************************************************************/ #include "precomp.h" #define gbdPunt FALSE // global boolean define punt all BitBlt calls /******************************Public*Table********************************\ * BYTE gajLeftMask[] and BYTE gajRightMask[] * * Edge tables for vXferScreenTo1bpp. \**************************************************************************/ BYTE gajLeftMask[] = { 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03, 0x01 }; BYTE gajRightMask[] = { 0xff, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe }; /******************************Public*Routine******************************\ * VOID vXferNativeSrccopy * * Does a SRCCOPY transfer of a bitmap to the screen using the frame * buffer, because on the ATI it's faster than using the data transfer * register. * \**************************************************************************/ VOID vXferNativeSrccopy( // Type FNXFER PDEV* ppdev, LONG c, // Count of rectangles, can't be zero RECTL* prcl, // List of destination rectangles, in relative // coordinates ULONG rop4, // Not used SURFOBJ* psoSrc, // Source surface POINTL* pptlSrc, // Original unclipped source point RECTL* prclDst, // Original unclipped destination rectangle XLATEOBJ* pxlo) // Not used { LONG xOffset; LONG yOffset; LONG dx; LONG dy; RECTL rclDst; POINTL ptlSrc; ASSERTDD((pxlo == NULL) || (pxlo->flXlate & XO_TRIVIAL), "Can handle trivial xlate only"); ASSERTDD(psoSrc->iBitmapFormat == ppdev->iBitmapFormat, "Source must be same colour depth as screen"); ASSERTDD(c > 0, "Can't handle zero rectangles"); ASSERTDD(rop4 == 0xcccc, "Must be a SRCCOPY rop"); xOffset = ppdev->xOffset; yOffset = ppdev->yOffset; dx = pptlSrc->x - prclDst->left; dy = pptlSrc->y - prclDst->top; // Add to destination to get source while (TRUE) { ptlSrc.x = prcl->left + dx; ptlSrc.y = prcl->top + dy; // 'pfnPutBits' takes only absolute coordinates, so add in the // off-screen bitmap offset here: rclDst.left = prcl->left + xOffset; rclDst.right = prcl->right + xOffset; rclDst.top = prcl->top + yOffset; rclDst.bottom = prcl->bottom + yOffset; ppdev->pfnPutBits(ppdev, psoSrc, &rclDst, &ptlSrc); if (--c == 0) return; prcl++; } } /******************************Public*Routine******************************\ * VOID vXferScreenTo1bpp * * Performs a SRCCOPY transfer from the screen (when it's 8bpp) to a 1bpp * bitmap. * \**************************************************************************/ #if defined(_X86_) VOID vXferScreenTo1bpp( // Type FNXFER PDEV* ppdev, LONG c, // Count of rectangles, can't be zero RECTL* prcl, // List of destination rectangles, in relative // coordinates ULONG ulHwMix, // Not used SURFOBJ* psoDst, // Destination surface POINTL* pptlSrc, // Original unclipped source point RECTL* prclDst, // Original unclipped destination rectangle XLATEOBJ* pxlo) // Provides colour-compressions information { LONG cjPelSize; VOID* pfnCompute; SURFOBJ soTmp; ULONG* pulXlate; ULONG ulForeColor; POINTL ptlSrc; RECTL rclTmp; BYTE* pjDst; BYTE jLeftMask; BYTE jRightMask; BYTE jNotLeftMask; BYTE jNotRightMask; LONG cjMiddle; LONG lDstDelta; LONG lSrcDelta; LONG cyTmpScans; LONG cyThis; LONG cyToGo; ASSERTDD(c > 0, "Can't handle zero rectangles"); ASSERTDD(psoDst->iBitmapFormat == BMF_1BPP, "Only 1bpp destinations"); ASSERTDD(TMP_BUFFER_SIZE >= (ppdev->cxMemory * ppdev->cjPelSize), "Temp buffer has to be larger than widest possible scan"); // When the destination is a 1bpp bitmap, the foreground colour // maps to '1', and any other colour maps to '0'. if (ppdev->iBitmapFormat == BMF_8BPP) { // When the source is 8bpp or less, we find the forground colour // by searching the translate table for the only '1': pulXlate = pxlo->pulXlate; while (*pulXlate != 1) pulXlate++; ulForeColor = pulXlate - pxlo->pulXlate; } else { ASSERTDD((ppdev->iBitmapFormat == BMF_16BPP) || (ppdev->iBitmapFormat == BMF_32BPP), "This routine only supports 8, 16 or 32bpp"); // When the source has a depth greater than 8bpp, the foreground // colour will be the first entry in the translate table we get // from calling 'piVector': pulXlate = XLATEOBJ_piVector(pxlo); ulForeColor = 0; if (pulXlate != NULL) // This check isn't really needed... ulForeColor = pulXlate[0]; } // We use the temporary buffer to keep a copy of the source // rectangle: soTmp.pvScan0 = ppdev->pvTmpBuffer; do { // ptlSrc points to the upper-left corner of the screen rectangle // for the current batch: ptlSrc.x = prcl->left + (pptlSrc->x - prclDst->left); ptlSrc.y = prcl->top + (pptlSrc->y - prclDst->top); // pfnGetBits takes absolute coordinates for the source point: ptlSrc.x += ppdev->xOffset; ptlSrc.y += ppdev->yOffset; pjDst = (BYTE*) psoDst->pvScan0 + (prcl->top * psoDst->lDelta) + (prcl->left >> 3); cjPelSize = ppdev->cjPelSize; soTmp.lDelta = (((prcl->right + 7L) & ~7L) - (prcl->left & ~7L)) * cjPelSize; // Our temporary buffer, into which we read a copy of the source, // may be smaller than the source rectangle. In that case, we // process the source rectangle in batches. // // cyTmpScans is the number of scans we can do in each batch. // cyToGo is the total number of scans we have to do for this // rectangle. // // We take the buffer size less four so that the right edge case // can safely read one dword past the end: cyTmpScans = (TMP_BUFFER_SIZE - 4) / soTmp.lDelta; cyToGo = prcl->bottom - prcl->top; ASSERTDD(cyTmpScans > 0, "Buffer too small for largest possible scan"); // Initialize variables that don't change within the batch loop: rclTmp.top = 0; rclTmp.left = prcl->left & 7L; rclTmp.right = (prcl->right - prcl->left) + rclTmp.left; // Note that we have to be careful with the right mask so that it // isn't zero. A right mask of zero would mean that we'd always be // touching one byte past the end of the scan (even though we // wouldn't actually be modifying that byte), and we must never // access memory past the end of the bitmap (because we can access // violate if the bitmap end is exactly page-aligned). jLeftMask = gajLeftMask[rclTmp.left & 7]; jRightMask = gajRightMask[rclTmp.right & 7]; cjMiddle = ((rclTmp.right - 1) >> 3) - (rclTmp.left >> 3) - 1; if (cjMiddle < 0) { // The blt starts and ends in the same byte: jLeftMask &= jRightMask; jRightMask = 0; cjMiddle = 0; } jNotLeftMask = ~jLeftMask; jNotRightMask = ~jRightMask; lDstDelta = psoDst->lDelta - cjMiddle - 2; // Delta from the end of the destination // to the start on the next scan, accounting // for 'left' and 'right' bytes lSrcDelta = soTmp.lDelta - ((8 * (cjMiddle + 2)) * cjPelSize); // Compute source delta for special cases // like when cjMiddle gets bumped up to '0', // and to correct aligned cases do { // This is the loop that breaks the source rectangle into // manageable batches. cyThis = cyTmpScans; cyToGo -= cyThis; if (cyToGo < 0) cyThis += cyToGo; rclTmp.bottom = cyThis; ppdev->pfnGetBits(ppdev, &soTmp, &rclTmp, &ptlSrc); ptlSrc.y += cyThis; // Get ready for next batch loop _asm { mov eax,ulForeColor ;eax = foreground colour ;ebx = temporary storage ;ecx = count of middle dst bytes ;dl = destination byte accumulator ;dh = temporary storage mov esi,soTmp.pvScan0 ;esi = source pointer mov edi,pjDst ;edi = destination pointer ; Figure out the appropriate compute routine: mov ebx,cjPelSize mov pfnCompute,offset Compute_Destination_Byte_From_8bpp dec ebx jz short Do_Left_Byte mov pfnCompute,offset Compute_Destination_Byte_From_16bpp dec ebx jz short Do_Left_Byte mov pfnCompute,offset Compute_Destination_Byte_From_32bpp Do_Left_Byte: call pfnCompute and dl,jLeftMask mov dh,jNotLeftMask and dh,[edi] or dh,dl mov [edi],dh inc edi mov ecx,cjMiddle dec ecx jl short Do_Right_Byte Do_Middle_Bytes: call pfnCompute mov [edi],dl inc edi dec ecx jge short Do_Middle_Bytes Do_Right_Byte: call pfnCompute and dl,jRightMask mov dh,jNotRightMask and dh,[edi] or dh,dl mov [edi],dh inc edi add edi,lDstDelta add esi,lSrcDelta dec cyThis jnz short Do_Left_Byte mov pjDst,edi ;save for next batch jmp All_Done Compute_Destination_Byte_From_8bpp: mov bl,[esi] sub bl,al cmp bl,1 adc dl,dl ;bit 0 mov bl,[esi+1] sub bl,al cmp bl,1 adc dl,dl ;bit 1 mov bl,[esi+2] sub bl,al cmp bl,1 adc dl,dl ;bit 2 mov bl,[esi+3] sub bl,al cmp bl,1 adc dl,dl ;bit 3 mov bl,[esi+4] sub bl,al cmp bl,1 adc dl,dl ;bit 4 mov bl,[esi+5] sub bl,al cmp bl,1 adc dl,dl ;bit 5 mov bl,[esi+6] sub bl,al cmp bl,1 adc dl,dl ;bit 6 mov bl,[esi+7] sub bl,al cmp bl,1 adc dl,dl ;bit 7 add esi,8 ;advance the source ret Compute_Destination_Byte_From_16bpp: mov bx,[esi] sub bx,ax cmp bx,1 adc dl,dl ;bit 0 mov bx,[esi+2] sub bx,ax cmp bx,1 adc dl,dl ;bit 1 mov bx,[esi+4] sub bx,ax cmp bx,1 adc dl,dl ;bit 2 mov bx,[esi+6] sub bx,ax cmp bx,1 adc dl,dl ;bit 3 mov bx,[esi+8] sub bx,ax cmp bx,1 adc dl,dl ;bit 4 mov bx,[esi+10] sub bx,ax cmp bx,1 adc dl,dl ;bit 5 mov bx,[esi+12] sub bx,ax cmp bx,1 adc dl,dl ;bit 6 mov bx,[esi+14] sub bx,ax cmp bx,1 adc dl,dl ;bit 7 add esi,16 ;advance the source ret Compute_Destination_Byte_From_32bpp: mov ebx,[esi] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 0 mov ebx,[esi+4] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 1 mov ebx,[esi+8] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 2 mov ebx,[esi+12] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 3 mov ebx,[esi+16] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 4 mov ebx,[esi+20] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 5 mov ebx,[esi+24] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 6 mov ebx,[esi+28] sub ebx,eax cmp ebx,1 adc dl,dl ;bit 7 add esi,32 ;advance the source ret All_Done: } } while (cyToGo > 0); prcl++; } while (--c != 0); } #endif // i386 /******************************Public*Routine******************************\ * BOOL bPuntBlt * * Has GDI do any drawing operations that we don't specifically handle * in the driver. * \**************************************************************************/ BOOL bPuntBlt( SURFOBJ* psoDst, SURFOBJ* psoSrc, SURFOBJ* psoMsk, CLIPOBJ* pco, XLATEOBJ* pxlo, RECTL* prclDst, POINTL* pptlSrc, POINTL* pptlMsk, BRUSHOBJ* pbo, POINTL* pptlBrush, ROP4 rop4) { PDEV* ppdev; if (psoDst->iType != STYPE_BITMAP) ppdev = (PDEV*) psoDst->dhpdev; else ppdev = (PDEV*) psoSrc->dhpdev; #if DBG { ////////////////////////////////////////////////////////////////////// // Diagnostics // // Since calling the engine to do any drawing can be rather painful, // particularly when the source is an off-screen DFB (since GDI will // have to allocate a DIB and call us to make a temporary copy before // it can even start drawing), we'll try to avoid it as much as // possible. // // Here we simply spew out information describing the blt whenever // this routine gets called (checked builds only, of course): ULONG ulClip; PDEV* ppdev; if (psoDst->dhpdev != NULL) ppdev = (PDEV*) psoDst->dhpdev; else ppdev = (PDEV*) psoSrc->dhpdev; ulClip = (pco == NULL) ? DC_TRIVIAL : pco->iDComplexity; DISPDBG((15, ">> Punt << Dst format: %li Dst type: %li Clip: %li Rop: %lx", psoDst->iBitmapFormat, psoDst->iType, ulClip, rop4)); if (psoSrc != NULL) { DISPDBG((15, " << Src format: %li Src type: %li", psoSrc->iBitmapFormat, psoSrc->iType)); if (psoSrc->iBitmapFormat == BMF_1BPP) { DISPDBG((15, " << Foreground: %lx Background: %lx", pxlo->pulXlate[1], pxlo->pulXlate[0])); } } if ((pxlo != NULL) && !(pxlo->flXlate & XO_TRIVIAL) && (psoSrc != NULL)) { if (((psoSrc->dhsurf == NULL) && (psoSrc->iBitmapFormat != ppdev->iBitmapFormat)) || ((psoDst->dhsurf == NULL) && (psoDst->iBitmapFormat != ppdev->iBitmapFormat))) { // Don't bother printing the 'xlate' message when the source // is a different bitmap format from the destination -- in // those cases we know there always has to be a translate. } else { DISPDBG((15, " << With xlate")); } } // If the rop4 requires a pattern, and it's a non-solid brush... if (((((rop4 >> 4) ^ (rop4)) & 0x0f0f) != 0) && (pbo->iSolidColor == -1)) { if (pbo->pvRbrush == NULL) DISPDBG((15, " << With brush -- Not created")); else DISPDBG((15, " << With brush -- Created Ok")); } } #endif if (DIRECT_ACCESS(ppdev)) { ////////////////////////////////////////////////////////////////////// // Banked Framebuffer bPuntBlt // // This section of code handles a PuntBlt when GDI can directly draw // on the framebuffer, but the drawing has to be done in banks: BANK bnk; BOOL b; HSURF hsurfTmp; SURFOBJ* psoTmp; SIZEL sizl; POINTL ptlSrc; RECTL rclTmp; RECTL rclDst; // We copy the original destination rectangle, and use that in every // GDI call-back instead of the original because sometimes GDI is // sneaky and points 'prclDst' to '&pco->rclBounds'. Because we // modify 'rclBounds', that would affect 'prclDst', which we don't // want to happen: rclDst = *prclDst; if ((psoSrc == NULL) || (psoSrc->iType == STYPE_BITMAP)) { ASSERTDD(psoDst->iType != STYPE_BITMAP, "Dest should be the screen when given a DIB source"); // Do a memory-to-screen blt: vBankStart(ppdev, &rclDst, pco, &bnk); b = TRUE; do { b &= EngBitBlt(bnk.pso, psoSrc, psoMsk, bnk.pco, pxlo, &rclDst, pptlSrc, pptlMsk, pbo, pptlBrush, rop4); } while (bBankEnum(&bnk)); } else { b = FALSE; // Assume failure // The screen is the source (it may be the destination too...) ptlSrc.x = pptlSrc->x + ppdev->xOffset; ptlSrc.y = pptlSrc->y + ppdev->yOffset; if ((pco != NULL) && (pco->iDComplexity != DC_TRIVIAL)) { // We have to intersect the destination rectangle with // the clip bounds if there is one (consider the case // where the app asked to blt a really, really big // rectangle from the screen -- prclDst would be really, // really big but pco->rclBounds would be the actual // area of interest): rclDst.left = max(rclDst.left, pco->rclBounds.left); rclDst.top = max(rclDst.top, pco->rclBounds.top); rclDst.right = min(rclDst.right, pco->rclBounds.right); rclDst.bottom = min(rclDst.bottom, pco->rclBounds.bottom); // Correspondingly, we have to offset the source point: ptlSrc.x += (rclDst.left - prclDst->left); ptlSrc.y += (rclDst.top - prclDst->top); } // We're now either going to do a screen-to-screen or screen-to-DIB // blt. In either case, we're going to create a temporary copy of // the source. (Why do we do this when GDI could do it for us? // GDI would create a temporary copy of the DIB for every bank // call-back!) sizl.cx = rclDst.right - rclDst.left; sizl.cy = rclDst.bottom - rclDst.top; // Don't forget to convert from relative to absolute coordinates // on the source! (vBankStart takes care of that for the // destination.) rclTmp.right = sizl.cx; rclTmp.bottom = sizl.cy; rclTmp.left = 0; rclTmp.top = 0; // GDI does guarantee us that the blt extents have already been // clipped to the surface boundaries (we don't have to worry // here about trying to read where there isn't video memory). // Let's just assert to make sure: ASSERTDD((ptlSrc.x >= 0) && (ptlSrc.y >= 0) && (ptlSrc.x + sizl.cx <= ppdev->cxMemory) && (ptlSrc.y + sizl.cy <= ppdev->cyMemory), "Source rectangle out of bounds!"); hsurfTmp = (HSURF) EngCreateBitmap(sizl, 0, // Let GDI choose ulWidth ppdev->iBitmapFormat, 0, // Don't need any options NULL);// Let GDI allocate if (hsurfTmp != 0) { psoTmp = EngLockSurface(hsurfTmp); if (psoTmp != NULL) { ppdev->pfnGetBits(ppdev, psoTmp, &rclTmp, &ptlSrc); if (psoDst->iType == STYPE_BITMAP) { // It was a Screen-to-DIB blt; now it's a DIB-to-DIB // blt. Note that the source point is (0, 0) in our // temporary surface: b = EngBitBlt(psoDst, psoTmp, psoMsk, pco, pxlo, &rclDst, (POINTL*) &rclTmp, pptlMsk, pbo, pptlBrush, rop4); } else { // It was a Screen-to-Screen blt; now it's a DIB-to- // screen blt. Note that the source point is (0, 0) // in our temporary surface: vBankStart(ppdev, &rclDst, pco, &bnk); b = TRUE; do { b &= EngBitBlt(bnk.pso, psoTmp, psoMsk, bnk.pco, pxlo, &rclDst, (POINTL*) &rclTmp, pptlMsk, pbo, pptlBrush, rop4); } while (bBankEnum(&bnk)); } EngUnlockSurface(psoTmp); } EngDeleteSurface(hsurfTmp); } } return(b); } else { ////////////////////////////////////////////////////////////////////// // Really Slow bPuntBlt // // Here we handle a PuntBlt when GDI can't draw directly on the // framebuffer (as on the Alpha, which can't do it because of its // 32 bit bus). If you thought the banked version was slow, just // look at this one. Guaranteed, there will be at least one bitmap // allocation and extra copy involved; there could be two if it's a // screen-to-screen operation. POINTL ptlSrc; RECTL rclDst; SIZEL sizl; BOOL bSrcIsScreen; HSURF hsurfSrc; RECTL rclTmp; BOOL b; LONG lDelta; BYTE* pjBits; BYTE* pjScan0; HSURF hsurfDst; RECTL rclScreen; b = FALSE; // For error cases, assume we'll fail rclDst = *prclDst; if (pptlSrc != NULL) ptlSrc = *pptlSrc; if ((pco != NULL) && (pco->iDComplexity != DC_TRIVIAL)) { // We have to intersect the destination rectangle with // the clip bounds if there is one (consider the case // where the app asked to blt a really, really big // rectangle from the screen -- prclDst would be really, // really big but pco->rclBounds would be the actual // area of interest): rclDst.left = max(rclDst.left, pco->rclBounds.left); rclDst.top = max(rclDst.top, pco->rclBounds.top); rclDst.right = min(rclDst.right, pco->rclBounds.right); rclDst.bottom = min(rclDst.bottom, pco->rclBounds.bottom); ptlSrc.x += (rclDst.left - prclDst->left); ptlSrc.y += (rclDst.top - prclDst->top); } sizl.cx = rclDst.right - rclDst.left; sizl.cy = rclDst.bottom - rclDst.top; // We only need to make a copy from the screen if the source is // the screen, and the source is involved in the rop. Note that // we have to check the rop before dereferencing 'psoSrc' // (because 'psoSrc' may be NULL if the source isn't involved): bSrcIsScreen = (((((rop4 >> 2) ^ (rop4)) & 0x3333) != 0) && (psoSrc->iType != STYPE_BITMAP)); if (bSrcIsScreen) { // We need to create a copy of the source rectangle: hsurfSrc = (HSURF) EngCreateBitmap(sizl, 0, ppdev->iBitmapFormat, 0, NULL); if (hsurfSrc == 0) goto Error_0; psoSrc = EngLockSurface(hsurfSrc); if (psoSrc == NULL) goto Error_1; rclTmp.left = 0; rclTmp.top = 0; rclTmp.right = sizl.cx; rclTmp.bottom = sizl.cy; // pfnGetBits takes absolute coordinates for the source point: ptlSrc.x += ppdev->xOffset; ptlSrc.y += ppdev->yOffset; ppdev->pfnGetBits(ppdev, psoSrc, &rclTmp, &ptlSrc); // The source will now come from (0, 0) of our temporary source // surface: ptlSrc.x = 0; ptlSrc.y = 0; } if (psoDst->iType == STYPE_BITMAP) { b = EngBitBlt(psoDst, psoSrc, psoMsk, pco, pxlo, &rclDst, &ptlSrc, pptlMsk, pbo, pptlBrush, rop4); } else { // We need to create a temporary work buffer. We have to do // some fudging with the offsets so that the upper-left corner // of the (relative coordinates) clip object bounds passed to // GDI will be transformed to the upper-left corner of our // temporary bitmap. // The alignment doesn't have to be as tight as this at 16bpp // and 32bpp, but it won't hurt: lDelta = (((rclDst.right + 3) & ~3L) - (rclDst.left & ~3L)) * ppdev->cjPelSize; // We're actually only allocating a bitmap that is 'sizl.cx' x // 'sizl.cy' in size: pjBits = AtiAllocMem(LMEM_FIXED, 0, lDelta * sizl.cy); if (pjBits == NULL) goto Error_2; // We now adjust the surface's 'pvScan0' so that when GDI thinks // it's writing to pixel (rclDst.top, rclDst.left), it will // actually be writing to the upper-left pixel of our temporary // bitmap: pjScan0 = pjBits - (rclDst.top * lDelta) - ((rclDst.left & ~3L) * ppdev->cjPelSize); ASSERTDD((((ULONG_PTR) pjScan0) & 3) == 0, "pvScan0 must be dword aligned!"); // The checked build of GDI sometimes checks on blts that // prclDst->right <= pso->sizl.cx, so we lie to it about // the size of our bitmap: sizl.cx = rclDst.right; sizl.cy = rclDst.bottom; hsurfDst = (HSURF) EngCreateBitmap( sizl, // Bitmap covers rectangle lDelta, // Use this delta ppdev->iBitmapFormat, // Same colour depth BMF_TOPDOWN, // Must have a positive delta pjScan0); // Where (0, 0) would be if ((hsurfDst == 0) || (!EngAssociateSurface(hsurfDst, ppdev->hdevEng, 0))) goto Error_3; psoDst = EngLockSurface(hsurfDst); if (psoDst == NULL) goto Error_4; // Make sure that the rectangle we Get/Put from/to the screen // is in absolute coordinates: rclScreen.left = rclDst.left + ppdev->xOffset; rclScreen.right = rclDst.right + ppdev->xOffset; rclScreen.top = rclDst.top + ppdev->yOffset; rclScreen.bottom = rclDst.bottom + ppdev->yOffset; // It would be nice to get a copy of the destination rectangle // only when the ROP involves the destination (or when the source // is an RLE), but we can't do that. If the brush is truly NULL, // GDI will immediately return TRUE from EngBitBlt, without // modifying the temporary bitmap -- and we would proceed to // copy the uninitialized temporary bitmap back to the screen. ppdev->pfnGetBits(ppdev, psoDst, &rclDst, (POINTL*) &rclScreen); b = EngBitBlt(psoDst, psoSrc, psoMsk, pco, pxlo, &rclDst, &ptlSrc, pptlMsk, pbo, pptlBrush, rop4); ppdev->pfnPutBits(ppdev, psoDst, &rclScreen, (POINTL*) &rclDst); EngUnlockSurface(psoDst); Error_4: EngDeleteSurface(hsurfDst); Error_3: AtiFreeMem(pjBits); } Error_2: if (bSrcIsScreen) { EngUnlockSurface(psoSrc); Error_1: EngDeleteSurface(hsurfSrc); } Error_0: return(b); } } /******************************Public*Routine******************************\ * BOOL DrvBitBlt * * Implements the workhorse routine of a display driver. * \**************************************************************************/ BOOL DrvBitBlt( SURFOBJ* psoDst, SURFOBJ* psoSrc, SURFOBJ* psoMsk, CLIPOBJ* pco, XLATEOBJ* pxlo, RECTL* prclDst, POINTL* pptlSrc, POINTL* pptlMsk, BRUSHOBJ* pbo, POINTL* pptlBrush, ROP4 rop4) { PDEV* ppdev; DSURF* pdsurfDst; DSURF* pdsurfSrc; POINTL ptlSrc; BYTE jClip; OH* poh; BOOL bMore; CLIPENUM ce; LONG c; RECTL rcl; BYTE rop3; FNFILL* pfnFill; RBRUSH_COLOR rbc; // Realized brush or solid colour FNXFER* pfnXfer; ULONG iSrcBitmapFormat; ULONG iDir; BOOL bRet; bRet = TRUE; // Assume success pdsurfDst = (DSURF*) psoDst->dhsurf; // May be NULL if ((psoSrc == NULL) && (gbdPunt == FALSE)) { /////////////////////////////////////////////////////////////////// // Fills /////////////////////////////////////////////////////////////////// // Fills are this function's "raison d'etre", so we handle them // as quickly as possible: ASSERTDD(pdsurfDst != NULL, "Expect only device destinations when no source"); if (pdsurfDst->dt == DT_SCREEN) { ppdev = (PDEV*) psoDst->dhpdev; poh = pdsurfDst->poh; ppdev->xOffset = poh->x; ppdev->yOffset = poh->y; // Make sure it doesn't involve a mask (i.e., it's really a // Rop3): rop3 = (BYTE) rop4; if ((BYTE) (rop4 >> 8) == rop3) { // Since 'psoSrc' is NULL, the rop3 had better not indicate // that we need a source. ASSERTDD((((rop4 >> 2) ^ (rop4)) & 0x33) == 0, "Need source but GDI gave us a NULL 'psoSrc'"); Fill_It: pfnFill = ppdev->pfnFillSolid; // Default to solid fill if ((((rop3 >> 4) ^ (rop3)) & 0xf) != 0) { // The rop says that a pattern is truly required // (blackness, for instance, doesn't need one): rbc.iSolidColor = pbo->iSolidColor; if (rbc.iSolidColor == -1) { // Try and realize the pattern brush; by doing // this call-back, GDI will eventually call us // again through DrvRealizeBrush: rbc.prb = pbo->pvRbrush; if (rbc.prb == NULL) { rbc.prb = BRUSHOBJ_pvGetRbrush(pbo); if (rbc.prb == NULL) { // If we couldn't realize the brush, punt // the call (it may have been a non 8x8 // brush or something, which we can't be // bothered to handle, so let GDI do the // drawing): goto Punt_It; } } pfnFill = rbc.prb->pfnFillPat; if ((ppdev->FeatureFlags & EVN_SDRAM_1M) && (pfnFill == vM64FillPatColor || pfnFill == vM64FillPatColor24)) { // The VTA4 can't handle color patterns correctly!! goto Punt_It; } } } // Note that these 2 'if's are more efficient than // a switch statement: if ((pco == NULL) || (pco->iDComplexity == DC_TRIVIAL)) { pfnFill(ppdev, 1, prclDst, rop4, rbc, pptlBrush); goto All_Done; } else if (pco->iDComplexity == DC_RECT) { if (bIntersect(prclDst, &pco->rclBounds, &rcl)) pfnFill(ppdev, 1, &rcl, rop4, rbc, pptlBrush); goto All_Done; } else { CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, CD_ANY, 0); do { bMore = CLIPOBJ_bEnum(pco, sizeof(ce), (ULONG*) &ce); c = cIntersect(prclDst, ce.arcl, ce.c); if (c != 0) pfnFill(ppdev, c, ce.arcl, rop4, rbc, pptlBrush); } while (bMore); goto All_Done; } } } } jClip = (pco == NULL) ? DC_TRIVIAL : pco->iDComplexity; if ((psoSrc != NULL) && (psoSrc->dhsurf != NULL)) { pdsurfSrc = (DSURF*) psoSrc->dhsurf; if (pdsurfSrc->dt == DT_DIB) { // Here we consider putting a DIB DFB back into off-screen // memory. If there's a translate, it's probably not worth // moving since we won't be able to use the hardware to do // the blt (a similar argument could be made for weird rops // and stuff that we'll only end up having GDI simulate, but // those should happen infrequently enough that I don't care). if ((pxlo == NULL) || (pxlo->flXlate & XO_TRIVIAL)) { ppdev = (PDEV*) psoSrc->dhpdev; // See 'DrvCopyBits' for some more comments on how this // moving-it-back-into-off-screen-memory thing works: if (pdsurfSrc->iUniq == ppdev->iHeapUniq) { if (--pdsurfSrc->cBlt == 0) { if (bMoveDibToOffscreenDfbIfRoom(ppdev, pdsurfSrc)) goto Continue_It; } } else { // Some space was freed up in off-screen memory, // so reset the counter for this DFB: pdsurfSrc->iUniq = ppdev->iHeapUniq; pdsurfSrc->cBlt = HEAP_COUNT_DOWN; } } psoSrc = pdsurfSrc->pso; // Handle the case where the source is a DIB DFB and the // destination is a regular bitmap: if (psoDst->dhsurf == NULL) goto EngBitBlt_It; } } Continue_It: if (pdsurfDst != NULL) { if (pdsurfDst->dt == DT_DIB) { psoDst = pdsurfDst->pso; // If the destination is a DIB, we can only handle this // call if the source is not a DIB: if ((psoSrc == NULL) || (psoSrc->dhsurf == NULL)) goto EngBitBlt_It; } } // At this point, we know that either the source or the destination is // not a DIB. Check for a DFB to screen, DFB to DFB, or screen to DFB // case: if ((psoSrc != NULL) && (psoDst->dhsurf != NULL) && (psoSrc->dhsurf != NULL)) { pdsurfSrc = (DSURF*) psoSrc->dhsurf; pdsurfDst = (DSURF*) psoDst->dhsurf; ASSERTDD(pdsurfSrc->dt == DT_SCREEN, "Expected screen source"); ASSERTDD(pdsurfDst->dt == DT_SCREEN, "Expected screen destination"); ptlSrc.x = pptlSrc->x - (pdsurfDst->poh->x - pdsurfSrc->poh->x); ptlSrc.y = pptlSrc->y - (pdsurfDst->poh->y - pdsurfSrc->poh->y); pptlSrc = &ptlSrc; } if (psoDst->dhsurf != NULL) { pdsurfDst = (DSURF*) psoDst->dhsurf; ppdev = (PDEV*) psoDst->dhpdev; ppdev->xOffset = pdsurfDst->poh->x; ppdev->yOffset = pdsurfDst->poh->y; } else { DSURF * pTmpdsurfSrc = (DSURF*) psoSrc->dhsurf; ppdev = (PDEV*) psoSrc->dhpdev; if (!pTmpdsurfSrc) { DISPDBG((0, "bad surf in psoSrc:%x, from %x\n", psoSrc, pdsurfSrc)); } ppdev->xOffset = pTmpdsurfSrc->poh->x; ppdev->yOffset = pTmpdsurfSrc->poh->y; } if (gbdPunt) { goto Punt_It; } if (((rop4 >> 8) & 0xff) == (rop4 & 0xff)) { // Since we've already handled the cases where the ROP4 is really // a ROP3 and no source is required, we can assert... ASSERTDD((psoSrc != NULL) && (pptlSrc != NULL), "Expected no-source case to already have been handled"); /////////////////////////////////////////////////////////////////// // Bitmap transfers /////////////////////////////////////////////////////////////////// // Since the foreground and background ROPs are the same, we // don't have to worry about no stinking masks (it's a simple // Rop3). rop3 = (BYTE) rop4; // Make it into a Rop3 (we keep the rop4 // around in case we decide to punt) if (psoDst->dhsurf != NULL) { // The destination is the screen: if ((rop3 >> 4) == (rop3 & 0xf)) { // The ROP3 doesn't require a pattern: if (psoSrc->dhsurf == NULL) { ////////////////////////////////////////////////// // DIB-to-screen blt iSrcBitmapFormat = psoSrc->iBitmapFormat; if (iSrcBitmapFormat == BMF_1BPP) { //RKE: do this when we have time if (ppdev->iBitmapFormat == BMF_24BPP) goto Punt_It; pfnXfer = ppdev->pfnXfer1bpp; goto Xfer_It; } else if ((iSrcBitmapFormat == ppdev->iBitmapFormat) && ((pxlo == NULL) || (pxlo->flXlate & XO_TRIVIAL))) { if ((rop3 & 0xf) != 0xc) { pfnXfer = ppdev->pfnXferNative; } else { // Plain SRCCOPY blts will be somewhat faster on // the ATI if we go through the memory aperture: pfnXfer = vXferNativeSrccopy; } goto Xfer_It; } else if (ppdev->iBitmapFormat != BMF_24BPP) { // I can't be bothered to write 4bpp or 8bpp // expansion code when running at 24bpp: if (iSrcBitmapFormat == BMF_4BPP) { pfnXfer = ppdev->pfnXfer4bpp; goto Xfer_It; } else if (iSrcBitmapFormat == BMF_8BPP) { pfnXfer = ppdev->pfnXfer8bpp; goto Xfer_It; } } } else // psoSrc->dhsurf != NULL { if ((pxlo == NULL) || (pxlo->flXlate & XO_TRIVIAL)) { ////////////////////////////////////////////////// // Screen-to-screen blt with no translate if (jClip == DC_TRIVIAL) { (ppdev->pfnCopyBlt)(ppdev, 1, prclDst, rop4, pptlSrc, prclDst); goto All_Done; } else if (jClip == DC_RECT) { if (bIntersect(prclDst, &pco->rclBounds, &rcl)) { (ppdev->pfnCopyBlt)(ppdev, 1, &rcl, rop4, pptlSrc, prclDst); } goto All_Done; } else { // Don't forget that we'll have to draw the // rectangles in the correct direction: if (pptlSrc->y >= prclDst->top) { if (pptlSrc->x >= prclDst->left) iDir = CD_RIGHTDOWN; else iDir = CD_LEFTDOWN; } else { if (pptlSrc->x >= prclDst->left) iDir = CD_RIGHTUP; else iDir = CD_LEFTUP; } CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, iDir, 0); do { bMore = CLIPOBJ_bEnum(pco, sizeof(ce), (ULONG*) &ce); c = cIntersect(prclDst, ce.arcl, ce.c); if (c != 0) { (ppdev->pfnCopyBlt)(ppdev, c, ce.arcl, rop4, pptlSrc, prclDst); } } while (bMore); goto All_Done; } } } } } else { #if defined(_X86_) { // We special case screen to monochrome blts because they // happen fairly often. We only handle SRCCOPY rops and // monochrome destinations (to handle a true 1bpp DIB // destination, we would have to do near-colour searches // on every colour; as it is, the foreground colour gets // mapped to '1', and everything else gets mapped to '0'): if ((psoDst->iBitmapFormat == BMF_1BPP) && (rop3 == 0xcc) && (pxlo->flXlate & XO_TO_MONO) && (ppdev->iBitmapFormat != BMF_24BPP)) { pfnXfer = vXferScreenTo1bpp; psoSrc = psoDst; // A misnomer, I admit goto Xfer_It; } } #endif // i386 } } else if ((psoMsk == NULL) && (rop4 == 0xaacc)) { // The only time GDI will ask us to do a true rop4 using the brush // mask is when the brush is 1bpp, and the background rop is AA // (meaning it's a NOP): if (ppdev->flCaps & CAPS_MONOCHROME_PATTERNS) { // We only handle these if our ATI has hardware monochrome // pattern capabilities: rop3 = (BYTE) rop4; goto Fill_It; } } // Just fall through to Punt_It... Punt_It: bRet = bPuntBlt(psoDst, psoSrc, psoMsk, pco, pxlo, prclDst, pptlSrc, pptlMsk, pbo, pptlBrush, rop4); goto All_Done; ////////////////////////////////////////////////////////////////////// // Common bitmap transfer Xfer_It: if (jClip == DC_TRIVIAL) { pfnXfer(ppdev, 1, prclDst, rop4, psoSrc, pptlSrc, prclDst, pxlo); goto All_Done; } else if (jClip == DC_RECT) { if (bIntersect(prclDst, &pco->rclBounds, &rcl)) pfnXfer(ppdev, 1, &rcl, rop4, psoSrc, pptlSrc, prclDst, pxlo); goto All_Done; } else { CLIPOBJ_cEnumStart(pco, FALSE, CT_RECTANGLES, CD_ANY, 0); do { bMore = CLIPOBJ_bEnum(pco, sizeof(ce), (ULONG*) &ce); c = cIntersect(prclDst, ce.arcl, ce.c); if (c != 0) { pfnXfer(ppdev, c, ce.arcl, rop4, psoSrc, pptlSrc, prclDst, pxlo); } } while (bMore); goto All_Done; } //////////////////////////////////////////////////////////////////////// // Common DIB blt EngBitBlt_It: // Our driver doesn't handle any blt's between two DIBs. Normally // a driver doesn't have to worry about this, but we do because // we have DFBs that may get moved from off-screen memory to a DIB, // where we have GDI do all the drawing. GDI does DIB drawing at // a reasonable speed (unless one of the surfaces is a device- // managed surface...) // // If either the source or destination surface in an EngBitBlt // call-back is a device-managed surface (meaning it's not a DIB // that GDI can draw with), GDI will automatically allocate memory // and call the driver's DrvCopyBits routine to create a DIB copy // that it can use. So this means that this could handle all 'punts', // and we could conceivably get rid of bPuntBlt. But this would have // a bad performance impact because of the extra memory allocations // and bitmap copies -- you really don't want to do this unless you // have to (or your surface was created such that GDI can draw // directly onto it) -- I've been burned by this because it's not // obvious that the performance impact is so bad. // // That being said, we only call EngBitBlt when all the surfaces // are DIBs: bRet = EngBitBlt(psoDst, psoSrc, psoMsk, pco, pxlo, prclDst, pptlSrc, pptlMsk, pbo, pptlBrush, rop4); All_Done: return(bRet); } /******************************Public*Routine******************************\ * BOOL DrvCopyBits * * Do fast bitmap copies. * * Note that GDI will (usually) automatically adjust the blt extents to * adjust for any rectangular clipping, so we'll rarely see DC_RECT * clipping in this routine (and as such, we don't bother special casing * it). * * I'm not sure if the performance benefit from this routine is actually * worth the increase in code size, since SRCCOPY BitBlts are hardly the * most common drawing operation we'll get. But what the heck. * * On the ATI it's faster to do straight SRCCOPY bitblt's through the * memory aperture than to use the data transfer register; as such, this * routine is the logical place to put this special case. * \**************************************************************************/ BOOL DrvCopyBits( SURFOBJ* psoDst, SURFOBJ* psoSrc, CLIPOBJ* pco, XLATEOBJ* pxlo, RECTL* prclDst, POINTL* pptlSrc) { return(DrvBitBlt(psoDst, psoSrc, NULL, pco, pxlo, prclDst, pptlSrc, NULL, NULL, NULL, 0xcccc)); }