-- Wellfleet-Series7-MIB -- Creation date : Tue Feb 21 11:03:44 EST 1995 -- Series 7 Software Release: -- Copyright 1994 Wellfleet Communications, Inc. All Rights -- Reserved. Reproduction of this document is authorized on -- condition that the foregoing copyright notice is included. -- This Wellfleet SNMP Management Information Base Specification -- (Specification) embodies Wellfleet's confidential and -- proprietary intellectual property. Wellfleet retains all -- title and ownership in the Specification, including any -- revisions. -- -- It is Wellfleet's intent to encourage the widespread use of -- this Specification in connection with the management of -- Wellfleet products. Wellfleet grants vendors, end-users, -- and other interested parties a non-exclusive license to -- use this Specification in connection with the management -- of Wellfleet products utilizing series 7.xx system software. -- -- This Specification is supplied "AS IS", and Wellfleet makes -- no warranty, either expressed or implied, as to the use, -- operation, condition, or performance of the Specification. -- Copyright text courtesy of D. Perkins. RFC7777-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, Counter, Gauge, TimeTicks, Opaque, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB; wellfleet OBJECT IDENTIFIER ::= { enterprises 18 } wfOspfGeneralGroup OBJECT IDENTIFIER ::= { wellfleet 3 5 3 2 3 1 } wfOspfGeneralDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'This value determines whether OSPF is configured' " DEFVAL { created } ::= { wfOspfGeneralGroup 1 } wfOspfGeneralDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it on all interfaces.' " DEFVAL { enabled } ::= { wfOspfGeneralGroup 2 } wfOspfGeneralState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), init(3), notpresent(4) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The state of OSPF' " DEFVAL { down } ::= { wfOspfGeneralGroup 3 } wfOspfRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " 'A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.' REFERENCE 'OSPF Version 2, C.1 Global parameters' " ::= { wfOspfGeneralGroup 4 } wfOspfVersionNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'The current version number of the OSPF protocol is 2.' REFERENCE 'OSPF Version 2, Title' " ::= { wfOspfGeneralGroup 5 } wfOspfAreaBdrRtrStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION " 'A flag to note whether this router is an area border router.' REFERENCE 'OSPF Version 2, Section 3 Splitting the AS into Areas' " DEFVAL { false } ::= { wfOspfGeneralGroup 6 } wfOspfASBdrRtrStatus OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'A flag to note whether this router is an Autonomous System border router.' REFERENCE 'OSPF Version 2, Section 3.3 Classification of routers' " DEFVAL { false } ::= { wfOspfGeneralGroup 7 } wfOspfTOSSupport OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The router's support for type-of-service routing.' REFERENCE 'OSPF Version 2, Appendix F.1.2 Optional TOS support' " DEFVAL { false } ::= { wfOspfGeneralGroup 8 } wfOspfSpfHoldDown OBJECT-TYPE SYNTAX INTEGER { defval(1), maximum(10) } ACCESS read-write STATUS mandatory DESCRIPTION " Hold Down Timer for the SPF. The SPF will run at most once per hold down timer value. A value of 0 means no hold down. " DEFVAL { defval } ::= { wfOspfGeneralGroup 9 } wfOspfSlotMask OBJECT-TYPE SYNTAX INTEGER { slotmask(4261150720) } ACCESS read-write STATUS mandatory DESCRIPTION " Slot mask for which slots OSPF is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN. " DEFVAL { slotmask } ::= { wfOspfGeneralGroup 10 } wfOspfAreaTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- The OSPF Area Data Structure contains information -- regarding the various areas. The interfaces and -- virtual links are configured as part of these areas. -- Area 0.0.0.0, by definition, is the Backbone Area 'Information describing the configured parameters and cumulative statistics of the router's attached areas.' REFERENCE 'OSPF Version 2, Section 6 The Area Data Structure' " ::= { wellfleet 3 5 3 2 3 2 } wfOspfAreaEntry OBJECT-TYPE SYNTAX WfOspfAreaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'Information describing the configured parameters and cumulative statistics of one of the router's attached areas.' " INDEX { wfOspfAreaId } ::= { wfOspfAreaTable 1 } WfOspfAreaEntry ::= SEQUENCE { wfOspfAreaDelete INTEGER, wfOspfAreaDisable INTEGER, wfOspfAreaState INTEGER, wfOspfAreaId IpAddress, wfOspfAuthType INTEGER, wfOspfImportASExtern INTEGER, wfOspfStubMetric INTEGER, wfOspfImportSum INTEGER, wfOspfSpfCnt Counter } wfOspfAreaDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value determines if the OSPF router is configured with this area. " DEFVAL { created } ::= { wfOspfAreaEntry 1 } wfOspfAreaDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value indicates the state of this area on the OSPF router. " DEFVAL { enabled } ::= { wfOspfAreaEntry 2 } wfOspfAreaState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION " This value indicates the state of the OSPF Area. " DEFVAL { down } ::= { wfOspfAreaEntry 3 } wfOspfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " ::= { wfOspfAreaEntry 4 } wfOspfAuthType OBJECT-TYPE SYNTAX INTEGER { nopassword(1), simplepassword(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.' REFERENCE 'OSPF Version 2, Appendix E Authentication' -- none (0), -- simplePassword (1) -- reserved for future specification (2..255) -- reserved for AS specific values (> 255) " DEFVAL { nopassword } ::= { wfOspfAreaEntry 5 } wfOspfImportASExtern OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The area's support for importing AS external link- state advertisements.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " DEFVAL { true } ::= { wfOspfAreaEntry 6 } wfOspfStubMetric OBJECT-TYPE SYNTAX INTEGER { minimum(1), maximum(16777215) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas.' " DEFVAL { minimum } ::= { wfOspfAreaEntry 7 } wfOspfImportSum OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The area's support for importing Summary advertisements into a stub area. This variable should not be set unless wfOspfImportASExtern is set to FALSE' " DEFVAL { true } ::= { wfOspfAreaEntry 8 } wfOspfSpfCnt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The number of times the OSPF SPF algorithm has been run for this area. " ::= { wfOspfAreaEntry 9 } wfOspfLsdbTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- OSPF Link State Database -- The Link State Database contains the Link State -- Advertisements from throughout the areas that the -- device is attached to. 'The OSPF Process's Links State Database.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' " ::= { wellfleet 3 5 3 2 3 3 } wfOspfLsdbEntry OBJECT-TYPE SYNTAX WfOspfLsdbEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'A single Link State Advertisement.' " INDEX { wfOspfLsdbAreaId, wfOspfLsdbType, wfOspfLsdbLSID, wfOspfLsdbRouterId } ::= { wfOspfLsdbTable 1 } WfOspfLsdbEntry ::= SEQUENCE { wfOspfLsdbAreaId IpAddress, wfOspfLsdbType INTEGER, wfOspfLsdbLSID IpAddress, wfOspfLsdbRouterId IpAddress, wfOspfLsdbSequence INTEGER, wfOspfLsdbAge INTEGER, wfOspfLsdbChecksum INTEGER, wfOspfLsdbAdvLen INTEGER } wfOspfLsdbAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The 32 bit identifier of the Area from which the LSA was received.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " ::= { wfOspfLsdbEntry 1 } wfOspfLsdbType OBJECT-TYPE SYNTAX INTEGER { routerlink(1), networklink(2), summarylink(3), assummarylink(4), asexternallink(5) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The type of the link state advertisement. Each link state type has a separate advertisement format.' REFERENCE 'OSPF Version 2, Appendix A.4.1 The Link State Advertisement header' stubLink (0), routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5) " ::= { wfOspfLsdbEntry 2 } wfOspfLsdbLSID OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.' REFERENCE 'OSPF Version 2, Section 12.1.4 Link State ID' " ::= { wfOspfLsdbEntry 3 } wfOspfLsdbRouterId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The 32 bit number that uniquely identifies the originating router in the Autonomous System.' REFERENCE 'OSPF Version 2, Appendix C.1 Global parameters' " ::= { wfOspfLsdbEntry 4 } wfOspfLsdbSequence OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " -- Note that the OSPF Sequence Number is a 32 bit signed -- integer. It starts with the value '80000001'h, -- or -'7FFFFFFF'h, and increments until '7FFFFFFF'h -- Thus, a typical sequence number will be very negative. 'The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.' REFERENCE 'OSPF Version 2, Section 12.1.6 LS sequence number' " ::= { wfOspfLsdbEntry 5 } wfOspfLsdbAge OBJECT-TYPE SYNTAX INTEGER { lsdbmaxage(3600) } ACCESS read-only STATUS mandatory DESCRIPTION " 'This field is the age of the link state advertisement in seconds.' (OSPF_LSDBMINAGE = 0) REFERENCE 'OSPF Version 2, Section 12.1.1 LS age' " ::= { wfOspfLsdbEntry 6 } wfOspfLsdbChecksum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.' REFERENCE 'OSPF Version 2, Section 12.1.7 LS checksum' " ::= { wfOspfLsdbEntry 7 } wfOspfLsdbAdvLen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'The length of entire Link State Advertisement, including its header.' REFERENCE 'OSPF Version 2, Section 12 Link State Advertisements' " ::= { wfOspfLsdbEntry 8 } wfOspfAreaRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfAreaRangeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " ::= { wellfleet 3 5 3 2 3 4 } wfOspfAreaRangeEntry OBJECT-TYPE SYNTAX WfOspfAreaRangeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " " INDEX { wfOspfAreaRangeAreaID, wfOspfAreaRangeNet } ::= { wfOspfAreaRangeTable 1 } WfOspfAreaRangeEntry ::= SEQUENCE { wfOspfAreaRangeDelete INTEGER, wfOspfAreaRangeDisable INTEGER, wfOspfAreaRangeState INTEGER, wfOspfAreaRangeAreaID IpAddress, wfOspfAreaRangeNet IpAddress, wfOspfAreaRangeMask IpAddress } wfOspfAreaRangeDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value determines if an Area Range has been configured for the OSPF router. " DEFVAL { created } ::= { wfOspfAreaRangeEntry 1 } wfOspfAreaRangeDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'This variable displays the status of the entry. Setting it to 'DISBALED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.' " DEFVAL { enabled } ::= { wfOspfAreaRangeEntry 2 } wfOspfAreaRangeState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-only STATUS mandatory DESCRIPTION " The state of the OSPF Area Range. " DEFVAL { down } ::= { wfOspfAreaRangeEntry 3 } wfOspfAreaRangeAreaID OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The Area the Address Range is to be found within.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " ::= { wfOspfAreaRangeEntry 4 } wfOspfAreaRangeNet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP Address of the Net or Subnet indicated by the range.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " ::= { wfOspfAreaRangeEntry 5 } wfOspfAreaRangeMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " 'The Subnet Mask that pertains to the Net or Subnet.' REFERENCE 'OSPF Version 2, Appendix C.2 Area parameters' " ::= { wfOspfAreaRangeEntry 6 } wfOspfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- OSPF Interface Table -- The OSPF Interface Table augments the ifTable with OSPF -- specific information. 'The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.' REFERENCE 'OSPF Version 2, Appendix C.3 Router interface parameters' " ::= { wellfleet 3 5 3 2 3 5 } wfOspfIfEntry OBJECT-TYPE SYNTAX WfOspfIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'The OSPF Interface Entry describes one interface from the viewpoint of OSPF.' " INDEX { wfOspfIfIpAddress, wfOspfAddressLessIf } ::= { wfOspfIfTable 1 } WfOspfIfEntry ::= SEQUENCE { wfOspfIfDelete INTEGER, wfOspfIfDisable INTEGER, wfOspfIfState INTEGER, wfOspfIfIpAddress IpAddress, wfOspfAddressLessIf INTEGER, wfOspfIfAreaId IpAddress, wfOspfIfType INTEGER, wfOspfIfRtrPriority INTEGER, wfOspfIfTransitDelay INTEGER, wfOspfIfRetransInterval INTEGER, wfOspfIfHelloInterval INTEGER, wfOspfIfRtrDeadInterval INTEGER, wfOspfIfPollInterval INTEGER, wfOspfIfDesignatedRouter IpAddress, wfOspfIfBackupDesignatedRouter IpAddress, wfOspfIfMetricCost INTEGER, wfOspfIfAuthKey OCTET STRING, wfOspfIfTxHellos Counter, wfOspfIfTxDBDescripts Counter, wfOspfIfTxLinkStateReqs Counter, wfOspfIfTxLinkStateUpds Counter, wfOspfIfTxLinkStateAcks Counter, wfOspfIfRxHellos Counter, wfOspfIfRxDBDescripts Counter, wfOspfIfRxLinkStateReqs Counter, wfOspfIfRxLinkStateUpds Counter, wfOspfIfRxLinkStateAcks Counter, wfOspfIfDrops Counter, wfOspfMtuSize INTEGER } wfOspfIfDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This variable determines in an OSPF Interface has been configured on the router. " DEFVAL { created } ::= { wfOspfIfEntry 1 } wfOspfIfDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.' " DEFVAL { enabled } ::= { wfOspfIfEntry 2 } wfOspfIfState OBJECT-TYPE SYNTAX INTEGER { down(1), loopback(2), waiting(3), pointtopoint(4), designatedrouter(5), backupdesignatedrouter(6), otherdesignatedrouter(7) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The OSPF Interface State.' down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) " DEFVAL { down } ::= { wfOspfIfEntry 3 } wfOspfIfIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP address of this OSPF interface.' " ::= { wfOspfIfEntry 4 } wfOspfAddressLessIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.' " ::= { wfOspfIfEntry 5 } wfOspfIfAreaId OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " 'A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.' default { '00000000'H } -- 0.0.0.0 " ::= { wfOspfIfEntry 6 } wfOspfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast(1), nbma(2), pointtopoint(3) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame Relay, and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.' broadcast (1), nbma (2), pointToPoint (3) " ::= { wfOspfIfEntry 7 } wfOspfIfRtrPriority OBJECT-TYPE SYNTAX INTEGER { defval(1), maximum(255) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their router id as a tie breaker.' " DEFVAL { defval } ::= { wfOspfIfEntry 8 } wfOspfIfTransitDelay OBJECT-TYPE SYNTAX INTEGER { minimum(1), maximum(3600) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.' " DEFVAL { minimum } ::= { wfOspfIfEntry 9 } wfOspfIfRetransInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(5), maximum(3600) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets.' " DEFVAL { defval } ::= { wfOspfIfEntry 10 } wfOspfIfHelloInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(10), maximum(65535) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.' " DEFVAL { defval } ::= { wfOspfIfEntry 11 } wfOspfIfRtrDeadInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(40), maximum(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.' " DEFVAL { defval } ::= { wfOspfIfEntry 12 } wfOspfIfPollInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(120), maximum(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor.' " DEFVAL { defval } ::= { wfOspfIfEntry 13 } wfOspfIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP Address of the Designated Router.' default { '00000000'H } -- 0.0.0.0 " ::= { wfOspfIfEntry 14 } wfOspfIfBackupDesignatedRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP Address of the Backup Designated Router.' default { '00000000'H } -- 0.0.0.0 " ::= { wfOspfIfEntry 15 } wfOspfIfMetricCost OBJECT-TYPE SYNTAX INTEGER { minimum(1), maximum(65535) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The cost of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'no route via this TOS'.' " DEFVAL { minimum } ::= { wfOspfIfEntry 16 } wfOspfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " 'The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero.' default { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 REFERENCE 'OSPF Version 2, Section 9 The Interface Data Structure' " ::= { wfOspfIfEntry 17 } wfOspfIfTxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Hello packets transmitted. " ::= { wfOspfIfEntry 18 } wfOspfIfTxDBDescripts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF DataBase Description packets transmitted. " ::= { wfOspfIfEntry 19 } wfOspfIfTxLinkStateReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Request packets transmitted. " ::= { wfOspfIfEntry 20 } wfOspfIfTxLinkStateUpds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Update packets transmitted. " ::= { wfOspfIfEntry 21 } wfOspfIfTxLinkStateAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link States Acknowledgements transmitted. " ::= { wfOspfIfEntry 22 } wfOspfIfRxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Hello packets received. " ::= { wfOspfIfEntry 23 } wfOspfIfRxDBDescripts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF DataBase Description packets received. " ::= { wfOspfIfEntry 24 } wfOspfIfRxLinkStateReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Requests received. " ::= { wfOspfIfEntry 25 } wfOspfIfRxLinkStateUpds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Updates received. " ::= { wfOspfIfEntry 26 } wfOspfIfRxLinkStateAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Acknowledgements received. " ::= { wfOspfIfEntry 27 } wfOspfIfDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF packets dropped because of invalid information in the packet. " ::= { wfOspfIfEntry 28 } wfOspfMtuSize OBJECT-TYPE SYNTAX INTEGER { defval(1), min(2), maximum(10000) } ACCESS read-write STATUS mandatory DESCRIPTION " Configure MTU size per OSPF inreface " DEFVAL { defval } ::= { wfOspfIfEntry 29 } wfOspfVirtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfVirtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- OSPF Virtual Interface Table -- The Virtual Interface Table describes the virtual -- links that the OSPF Process is configured to -- carry on. 'Information about this router's virtual interfaces.' REFERENCE 'OSPF Version 2, Appendix C.4 Virtual link parameters' " ::= { wellfleet 3 5 3 2 3 6 } wfOspfVirtIfEntry OBJECT-TYPE SYNTAX WfOspfVirtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'Information about a single Virtual Interface.' " INDEX { wfOspfVirtIfAreaID, wfOspfVirtIfNeighbor } ::= { wfOspfVirtIfTable 1 } WfOspfVirtIfEntry ::= SEQUENCE { wfOspfVirtIfDelete INTEGER, wfOspfVirtIfDisable INTEGER, wfOspfVirtIfState INTEGER, wfOspfVirtIfAreaID IpAddress, wfOspfVirtIfNeighbor IpAddress, wfOspfVirtIfTransitDelay INTEGER, wfOspfVirtIfRetransInterval INTEGER, wfOspfVirtIfHelloInterval INTEGER, wfOspfVirtIfRtrDeadInterval INTEGER, wfOspfVirtIfAuthKey OCTET STRING, wfOspfVirtIfTxHellos Counter, wfOspfVirtIfTxDBDescripts Counter, wfOspfVirtIfTxLinkStateReqs Counter, wfOspfVirtIfTxLinkStateUpds Counter, wfOspfVirtIfTxLinkStateAcks Counter, wfOspfVirtIfRxHellos Counter, wfOspfVirtIfRxDBDescripts Counter, wfOspfVirtIfRxLinkStateReqs Counter, wfOspfVirtIfRxLinkStateUpds Counter, wfOspfVirtIfRxLinkStateAcks Counter, wfOspfVirtIfDrops Counter } wfOspfVirtIfDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " " DEFVAL { created } ::= { wfOspfVirtIfEntry 1 } wfOspfVirtIfDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.' " DEFVAL { enabled } ::= { wfOspfVirtIfEntry 2 } wfOspfVirtIfState OBJECT-TYPE SYNTAX INTEGER { down(1), pointtopoint(4) } ACCESS read-only STATUS mandatory DESCRIPTION " 'OSPF virtual interface states.' down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable " DEFVAL { down } ::= { wfOspfVirtIfEntry 3 } wfOspfVirtIfAreaID OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0' " ::= { wfOspfVirtIfEntry 4 } wfOspfVirtIfNeighbor OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The Router ID of the Virtual Neighbor.' " ::= { wfOspfVirtIfEntry 5 } wfOspfVirtIfTransitDelay OBJECT-TYPE SYNTAX INTEGER { minimum(1), maximum(3600) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The estimated number of seconds it takes to transmit a link- state update packet over this interface.' " DEFVAL { minimum } ::= { wfOspfVirtIfEntry 6 } wfOspfVirtIfRetransInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(5), maximum(3600) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time.' " DEFVAL { defval } ::= { wfOspfVirtIfEntry 7 } wfOspfVirtIfHelloInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(15), maximum(65535) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.' " DEFVAL { defval } ::= { wfOspfVirtIfEntry 8 } wfOspfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX INTEGER { minimum(1), defval(60), maximum(2147483647) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.' " DEFVAL { defval } ::= { wfOspfVirtIfEntry 9 } wfOspfVirtIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION " 'If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, ospfVifAuthKey always returns a string of length zero.' REFERENCE 'OSPF Version 2, Section 9 The Interface Data Structure' " ::= { wfOspfVirtIfEntry 10 } wfOspfVirtIfTxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Hello packets transmitted on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 11 } wfOspfVirtIfTxDBDescripts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF DataBase Description packets transmitted on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 12 } wfOspfVirtIfTxLinkStateReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Request packets transmitted on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 13 } wfOspfVirtIfTxLinkStateUpds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Update packets transmitted on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 14 } wfOspfVirtIfTxLinkStateAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Acknowledgement packets transmitted on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 15 } wfOspfVirtIfRxHellos OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Hello packets received on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 16 } wfOspfVirtIfRxDBDescripts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF DataBase Description packets received on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 17 } wfOspfVirtIfRxLinkStateReqs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Request packets recieved on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 18 } wfOspfVirtIfRxLinkStateUpds OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Update packets received on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 19 } wfOspfVirtIfRxLinkStateAcks OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF Link State Acknowledgement packets received on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 20 } wfOspfVirtIfDrops OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " Number of OSPF packets dropped on Virtual Interfaces. " ::= { wfOspfVirtIfEntry 21 } wfOspfNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- OSPF Neighbor Table -- The OSPF Neighbor Table describes all neighbors in -- the locality of the subject router. 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' " ::= { wellfleet 3 5 3 2 3 7 } wfOspfNbrEntry OBJECT-TYPE SYNTAX WfOspfNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' " INDEX { wfOspfNbrIpAddr, wfOspfNbrAddressLessIndex } ::= { wfOspfNbrTable 1 } WfOspfNbrEntry ::= SEQUENCE { wfOspfNbrDelete INTEGER, wfOspfNbrDisable INTEGER, wfOspfNbrState INTEGER, wfOspfNbrIpAddr IpAddress, wfOspfNbrIfAddr IpAddress, wfOspfNbrAddressLessIndex INTEGER, wfOspfNbrRtrId IpAddress, wfOspfNbrOptions INTEGER, wfOspfNbrPriority INTEGER, wfOspfNbrEvents Counter, wfOspfNbrLSRetransQLen Gauge } wfOspfNbrDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This variable indicates the existence of a static OSPF neighbor. " DEFVAL { created } ::= { wfOspfNbrEntry 1 } wfOspfNbrDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION " 'This variable displays the status of the entry. Setting it to 'DISABLED' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.' " DEFVAL { enabled } ::= { wfOspfNbrEntry 2 } wfOspfNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) " DEFVAL { down } ::= { wfOspfNbrEntry 3 } wfOspfNbrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP address of this neighbor.' " ::= { wfOspfNbrEntry 4 } wfOspfNbrIfAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION " 'The Interface IP address for this neighbor.' " ::= { wfOspfNbrEntry 5 } wfOspfNbrAddressLessIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.' " ::= { wfOspfNbrEntry 6 } wfOspfNbrRtrId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0 " ::= { wfOspfNbrEntry 7 } wfOspfNbrOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.' REFERENCE 'OSPF Version 2, Section 12.1.2 Options' " ::= { wfOspfNbrEntry 8 } wfOspfNbrPriority OBJECT-TYPE SYNTAX INTEGER { defval(1), maximum(255) } ACCESS read-write STATUS mandatory DESCRIPTION " 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.' " DEFVAL { defval } ::= { wfOspfNbrEntry 9 } wfOspfNbrEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " 'The number of times this neighbor relationship has changed state, or an error has occurred.' " ::= { wfOspfNbrEntry 10 } wfOspfNbrLSRetransQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " 'The current length of the retransmission queue.' " ::= { wfOspfNbrEntry 11 } wfOspfVirtNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfVirtNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- WFOSPF Virtual Neighbor Table -- This table describes all virtual neighbors. -- Since Virtual Links are configured in the -- virtual interface table, this table is read-only. 'A table of virtual neighbor information.' REFERENCE 'OSPF Version 2, ' " ::= { wellfleet 3 5 3 2 3 8 } wfOspfVirtNbrEntry OBJECT-TYPE SYNTAX WfOspfVirtNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'Virtual neighbor information.' REFERENCE 'OSPF Version 2, ' " INDEX { wfOspfVirtNbrArea, wfOspfVirtNbrRtrId } ::= { wfOspfVirtNbrTable 1 } WfOspfVirtNbrEntry ::= SEQUENCE { wfOspfVirtNbrArea IpAddress, wfOspfVirtNbrRtrId IpAddress, wfOspfVirtNbrIpAddr IpAddress, wfOspfVirtNbrOptions INTEGER, wfOspfVirtNbrState INTEGER, wfOspfVirtNbrEvents Counter, wfOspfVirtNbrLSRetransQLen Gauge } wfOspfVirtNbrArea OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The Transit Area Identifier.' " ::= { wfOspfVirtNbrEntry 1 } wfOspfVirtNbrRtrId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.' " ::= { wfOspfVirtNbrEntry 2 } wfOspfVirtNbrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP address this Virtual Neighbor is using.' " ::= { wfOspfVirtNbrEntry 3 } wfOspfVirtNbrOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'A bit map corresponding to the neighbor's options field. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor.' " ::= { wfOspfVirtNbrEntry 4 } wfOspfVirtNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The state of the Virtual Neighbor Relationship.' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) " DEFVAL { down } ::= { wfOspfVirtNbrEntry 5 } wfOspfVirtNbrEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " 'The number of times this virtual link has changed its state, or an error has occurred.' " ::= { wfOspfVirtNbrEntry 6 } wfOspfVirtNbrLSRetransQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " 'The current length of the retransmission queue.' " ::= { wfOspfVirtNbrEntry 7 } wfOspfDynNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF WfOspfDynNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " -- OSPF Dynamic Neighbor Table -- The OSPF Dynamic Neighbor Table describes all neighbors in -- the locality of the subject router learned during operation. 'A table of non-virtual neighbor information.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' " ::= { wellfleet 3 5 3 2 3 9 } wfOspfDynNbrEntry OBJECT-TYPE SYNTAX WfOspfDynNbrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " 'The information regarding a single neighbor.' REFERENCE 'OSPF Version 2, Section 10 The Neighbor Data Structure' " INDEX { wfOspfDynNbrIpAddr, wfOspfDynNbrAddressLessIndex } ::= { wfOspfDynNbrTable 1 } WfOspfDynNbrEntry ::= SEQUENCE { wfOspfDynNbrState INTEGER, wfOspfDynNbrIpAddr IpAddress, wfOspfDynNbrIfAddr IpAddress, wfOspfDynNbrAddressLessIndex INTEGER, wfOspfDynNbrRtrId IpAddress, wfOspfDynNbrOptions INTEGER, wfOspfDynNbrPriority INTEGER, wfOspfDynNbrEvents Counter, wfOspfDynNbrLSRetransQLen Gauge } wfOspfDynNbrState OBJECT-TYPE SYNTAX INTEGER { down(1), attempt(2), init(3), twoway(4), exchangstart(5), exchange(6), loading(7), full(8) } ACCESS read-only STATUS mandatory DESCRIPTION " 'The State of the relationship with this Neighbor.' REFERENCE 'OSPF Version 2, Section 10.1 Neighbor States' down (1), attempt (2), init (3), twoWay (4), exchangeStart (5), exchange (6), loading (7), full (8) " DEFVAL { down } ::= { wfOspfDynNbrEntry 1 } wfOspfDynNbrIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The IP address of this neighbor.' " ::= { wfOspfDynNbrEntry 2 } wfOspfDynNbrIfAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'The Interface IP address for this neighbor.' " ::= { wfOspfDynNbrEntry 3 } wfOspfDynNbrAddressLessIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " ' On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.' " ::= { wfOspfDynNbrEntry 4 } wfOspfDynNbrRtrId OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION " 'A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System.' default { '00000000'H } -- 0.0.0.0 " ::= { wfOspfDynNbrEntry 5 } wfOspfDynNbrOptions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a stub area. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.' REFERENCE 'OSPF Version 2, Section 12.1.2 Options' " ::= { wfOspfDynNbrEntry 6 } wfOspfDynNbrPriority OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION " 'The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.' " ::= { wfOspfDynNbrEntry 7 } wfOspfDynNbrEvents OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " 'The number of times this neighbor relationship has changed state, or an error has occurred.' " ::= { wfOspfDynNbrEntry 8 } wfOspfDynNbrLSRetransQLen OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION " 'The current length of the retransmission queue.' " ::= { wfOspfDynNbrEntry 9 } END