#ifndef _AWG3FILE_ #define _AWG3FILE_ /******************************************************************** @doc EXTERNAL SRVRDLL LINEARIZER @type VOID | AWG3 File Format | An AWG3 file can be used to describe any multi page image encoded using a CCITT G3 standard like MH, MR, or MMR. The file format is a special case of the Microsoft Fax Linearized format. It consists of a LINHEADER structure, followed by an extended linearized header, followed by the image data. The image data is specified as one or more headers, each followed by a page of encoded image data. Each header starts a new page. The file is terminated with a header containing a special end-of-file signature marker. Linearizer helper function CreateSimpleHeader should be used to write the LINHEADER and extended linearized header when creating an AWG3 file. Linearizer helper function DiscardLinHeader should be used to skip past the LINHEADER and extended linearized header when reading the AWG3 file. The page header format is defined by the structure . The data for each page consists of one or more frames. A frame consists of a DWORD indicating the length of data in the frame followed by that many bytes of data. The last frame of each page must be of zero length and indicates the end of the page data. The data consists of raw MH, MR, or MMR, encoded so that the least significant bit of each byte should be sent first over the wire. @xref ********************************************************************/ /******** @doc EXTERNAL SRVRDLL LINEARIZER @types AWG3HEADER | Describes the Header Structure for an AWG3 File. @field WORD | wSig | Must be SIG_G3 for the page headers, and SIG_ENDFILE for the end of file header. @field WORD | wHeaderSize | Must be set to the size of the header structure. Used for version control. @field WORD | wTotalHeaders | If non-zero, this indicates the total number of and headers (including the end-of-file header) in this file. This need only be set in the first header. If zero, the total number of headers is not specified directly and can be obtained by traversing the headers in the file (until the end-of-file header). @field WORD | wHeaderNum | Gives the ordinal number for this header. Must be set for all headers. Numbering starts at 1. @field DWORD | lDataOffset | Gives the offset from the beginning of the current header to the start of the first frame of the data for this page. Must always be set. @field DWORD | lNextHeaderOffset | Gives the offset from the start of the current header to where the header for the next page can be found. If this is set to 0, the next header starts at the end of the last frame (which will be a null frame) for this page. @field DWORD | AwRes | One of the standard resolution defines specified in . @field DWORD | Encoding | One of the G3 Fax types from the standard types defined in . Basically one of MH_DATA, MR_DATA, or MMR_DATA. @field DWORD | PageWidth | One of the standard page widths as defined in . @field DWORD | PageLength | One of the standard page lengths as defined in . @xref ********/ #define SIG_G3 0x3347 #define SIG_ENDFILE 0x4067 #ifndef WIN16 // remove WIN16 irritation #pragma pack(push) #endif #pragma pack(1) typedef struct { WORD wSig; // always set to one of the above SIG_ #defines WORD wHeaderSize; // always set WORD wTotalHeaders; // can be 0 WORD wHeaderNum; // starts from 1 // 8 bytes // all offsets from start of _this_header_ DWORD lDataOffset; // always set. points to the first frame-size DWORD DWORD lNextHeaderOffset; // may be NULL--then next header follows end of data // 16 bytes DWORD AwRes; // as per AWRES_ defines below. DIFFERENT from Snowball DWORD Encoding; // as per _DATA defines below. Same as Snowball DWORD PageWidth; // as per WIDTH_ defines below. Same as Snowball DWORD PageLength; // as per LENGTH_ defines below. Same as SNowball // 32 bytes BYTE Reserved1[32]; // pad out to 64 bytes for future expansion } AWG3HEADER, far* LPAWG3HEADER; #ifdef WIN16 // remove WIN16 irritation #pragma pack() #else #pragma pack(pop) #endif // Standard Bit Valued MetaData values #define MH_DATA 0x00000001L #define MR_DATA 0x00000002L #define MMR_DATA 0x00000004L // Standard Resolutions #define AWRES_UNKNOWN 0x00000000L #define AWRES_CUSTOM 0x00000001L #define AWRES_mm080_038 0x00000002L #define AWRES_mm080_077 0x00000004L #define AWRES_mm080_154 0x00000008L #define AWRES_mm160_154 0x00000010L #define AWRES_200_100 0x00000020L #define AWRES_200_200 0x00000040L #define AWRES_200_400 0x00000080L #define AWRES_300_300 0x00000100L #define AWRES_400_400 0x00000200L #define AWRES_600_600 0x00000400L #define AWRES_75_75 0x00000800L #define AWRES_100_100 0x00001000L /******** @doc EXTERNAL DATATYPES SRVRDLL @type WORD | STD_PAGE_LENGTHS | Standard Page Lengths @emem LENGTH_A4 | Std A4 paper length, Value: 0 @emem LENGTH_B4 | Std B4 paper length, Value: 1 @emem LENGTH_UNLIMITED | Unknown length, Value: 2 @comm These lengths are compatible with those defined by the CCITT for G3 machines. They are used in fax format headers, and in structures dealing with fax machine capabilities. ********/ // Length defines #define LENGTH_A4 0 #define LENGTH_B4 1 #define LENGTH_UNLIMITED 2 /******** @doc EXTERNAL DATATYPES SRVRDLL @type WORD | STD_PAGE_WIDTHS | Standard Page Widths @emem WIDTH_A4 |1728 pixels, Value: 0 @emem WIDTH_B4 |2048 pixels, Value: 1 @emem WIDTH_A3 |2432 pixels, Value: 2 @emem WIDTH_A5 |1216 pixels, Value: 16 @emem WIDTH_A6 |864 pixels, Value: 32 @comm These widths are compatible with those defined by the CCITT for G3 machines. They are used in fax format headers, and in structures dealing with fax machine capabilities. ********/ //Width defines #define WIDTH_A4 0 /* 1728 pixels */ #define WIDTH_B4 1 /* 2048 pixels */ #define WIDTH_A3 2 /* 2432 pixels */ #define WIDTH_MAX WIDTH_A3 #define WIDTH_A5 16 /* 1216 pixels */ #define WIDTH_A6 32 /* 864 pixels */ #define WIDTH_A5_1728 64 /* 1216 pixels */ #define WIDTH_A6_1728 128 /* 864 pixels */ #endif // _AWG3FILE_