Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

177 lines
6.8 KiB

/*
*
* Modifications: $Header: J:/Archives/preboot/lsa2/inc/pxe_api.h_v 1.0 May 02 1997 17:01:00 MJOHNSOX $
*
* Copyright(c) 1997 by Intel Corporation. All Rights Reserved.
*
*/
#ifndef _PXENV_API_H
#define _PXENV_API_H
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
/* Parameter structure and type definitions for PXENV API version 2.x
*
* PXENV.H needs to be #included before this file.
*
* None of the PXENV API services are available after the stack
* has been unloaded.
*/
#include "bootp.h" /* Defines BOOTPLAYER */
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
/* Format of PXENV entry point structure.
*/
typedef struct s_PXENV_ENTRY {
UINT8 signature[6]; /* 'PXENV+' */
UINT16 version; /* MSB=major, LSB=minor */
UINT8 length; /* sizeof(struct s_PXENV_ENTRY) */
UINT8 checksum; /* 8-bit checksum off structure, */
/* including this bytes should */
/* be 0. */
UINT16 rm_entry_off; /* 16-bit real-mode offset and */
UINT16 rm_entry_seg; /* segment of the PXENV API entry */
/* point. */
UINT16 pm_entry_off; /* 16-bit protected-mode offset */
UINT32 pm_entry_seg; /* and segment base address of */
/* the PXENV API entry point. */
/* The PROM stack, base code and data segment selectors are only */
/* required until the base code (TFTP API) layer is removed from */
/* memory (this can only be done in real mode). */
UINT16 stack_sel; /* PROM stack segment. Will be set */
UINT16 stack_size; /* to 0 when removed from memory. */
UINT16 base_cs_sel; /* Base code segment. Will be set */
UINT16 base_cs_size; /* to 0 when removed from memory. */
UINT16 base_ds_sel; /* Base data segment. Will be set */
UINT16 base_ds_size; /* to 0 when removed from memory. */
UINT16 mlid_ds_sel; /* MLID data segment. Will be set */
UINT16 mlid_ds_size; /* to 0 when removed from memory. */
UINT16 mlid_cs_sel; /* MLID code segment. Will be set */
UINT16 mlid_cs_size; /* to 0 when removed from memory. */
#if 0
UINT16 unknown1; /* The V1.0 beta ROM added two extra unknown fields. */
UINT16 unknown2; /* They are not included in the definition here in */
/* order to allow startrom\main.c\PxenvVerifyEntry */
/* to work with older ROMs. */
#endif
} t_PXENV_ENTRY;
#define PXENV_ENTRY_SIG "PXENV+"
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
/* One of the following command op-codes needs to be loaded into the
* op-code register (BX) before making a call a PXENV API service.
*/
#define PXENV_UNLOAD_STACK 0x70
#define PXENV_GET_BINL_INFO 0x71
#define PXENV_RESTART_DHCP 0x72
#define PXENV_RESTART_TFTP 0x73
#define PXENV_GET_RAMD_INFO 0x74
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
/* PXENV API parameter structure typedefs.
*/
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
typedef struct s_PXENV_UNLOAD_STACK {
UINT16 status; /* Out: See PXENV_STATUS_xxx */
/* constants. */
UINT16 rm_entry_off; /* Out: 16-bit real-mode segment and */
UINT16 rm_entry_seg; /* offset of PXENV Entry Point */
/* structure. */
UINT16 pm_entry_off; /* Out: 16-bit protected-mode offset */
UINT32 pm_entry_base; /* and segment base address of */
/* PXENV Entry Point structure. */
} t_PXENV_UNLOAD_STACK;
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
/* Packet types that can be requested in the s_PXENV_GET_BINL_INFO structure. */
#define PXENV_PACKET_TYPE_DHCP_DISCOVER 1
#define PXENV_PACKET_TYPE_DHCP_ACK 2
#define PXENV_PACKET_TYPE_BINL_REPLY 3
/* Three packets are preserved and available through this interface: 1) The
* DHCP Discover packet sent by the client, 2) the DHCP acknowledgement
* packet returned by the DHCP server, and 3) the reply packet from the BINL
* server. If the DHCP server provided the image bootfile name, the
* DHCP_ACK and BINL_REPLY packets will identical.
*/
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
typedef struct s_PXENV_GET_BINL_INFO {
UINT16 status; /* Out: See PXENV_STATUS_xxx */
/* constants. */
UINT16 packet_type; /* In: See PXENV_PACKET_TYPE_xxx */
/* constants */
UINT16 buffer_size; /* In: Size of the buffer in */
/* bytes. Specifies the maximum */
/* amount of data that will be */
/* copied by the service. A size */
/* of zero is valid. */
/* Out: Amount of BINL data, in */
/* bytes, that was copied into */
/* the buffer. For an input */
/* size of zero, no data will be */
/* copied and buffer_size will */
/* be set to the maximum amount */
/* of data available to be */
/* copied. */
UINT16 buffer_offset; /* In: 16-bit offset and segment */
UINT16 buffer_segment; /* selector of a buffer where the */
/* requested packet will be */
/* copied. */
} t_PXENV_GET_BINL_INFO;
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
typedef struct s_PXENV_RESTART_DHCP {
UINT16 status; /* Out: See PXENV_STATUS_xxx */
/* constants. */
} t_PXENV_RESTART_DHCP;
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
#define s_PXENV_RESTART_TFTP s_PXENV_TFTP_READ_FILE
#define t_PXENV_RESTART_TFTP t_PXENV_TFTP_READ_FILE
/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
typedef struct s_PXENV_GET_RAMD_INFO {
UINT16 status; /* Out: See PXENV_STATUS_xxx */
/* constants. */
UINT32 ramd_info; /* Out: Far pointer to RAMDisk */
/* information structure. */
} t_PXENV_GET_RAMD_INFO;
typedef struct s_PXENV_RAMD_INFO {
UINT16 orig_fbms; /* Original free base memory size. */
UINT32 ramd_addr; /* RAMDisk physical address. */
UINT32 orig_int13; /* Original Int 13h ISR. */
UINT32 orig_int1A; /* Original Int 1Ah ISR. */
UINT32 orig_pxenv;
UINT16 dhcp_discover_seg; /* Segment address & length of */
UINT16 dhcp_discover_len; /* DHCP discover packet. */
UINT16 dhcp_ack_seg; /* Segment address & length of */
UINT16 dhcp_ack_len; /* DHCP ack packet. */
UINT16 binl_reply_seg; /* Segment address & length of */
UINT16 binl_reply_len; /* BINL reply packet. */
UINT16 flags; /* RAMDisk operation flags. */
UINT16 xms_page; /* XMS page number of relocated */
/* RAMDisk image. 0 == use Int 87h. */
UINT32 xms_entry; /* XMS API entry point. */
} t_PXENV_RAMD_INFO;
#define PXENV_RAMD_FLAG_DISABLE 0x0001
#define PXENV_RAMD_FLAG_PROTECTED 0x0002
#endif /* _PXENV_API_H */
/* EOF - $Workfile: pxe_api.h $ */