mirror of https://github.com/tongzx/nt5src
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1947 lines
50 KiB
1947 lines
50 KiB
page,132
|
|
;---------------------------Module-Header-------------------------------;
|
|
; Module Name: IBMCOM.ASM
|
|
;
|
|
; !!!
|
|
;
|
|
; Created: Fri 06-Feb-1987 10:45:12
|
|
; Author: Walt Moore [waltm]
|
|
;
|
|
; Copyright (c) Microsoft Corporation 1985-1990. All Rights Reserved.
|
|
;
|
|
; General Description:
|
|
;
|
|
; History:
|
|
;
|
|
; ***************************************************************
|
|
; Tue Dec 19 1989 09:32:15 -by- Amit Chatterjee [amitc]
|
|
; ---------------------------------------------------------------
|
|
; Modified the 'InitAPort' routine called from 'ReactivateOpenCommPort'.
|
|
; If the out queue for a port has characters to send out then we must
|
|
; restart the trasmission process by faking a comm interrupt on that
|
|
; port.
|
|
; ***************************************************************
|
|
; Tue Nov 21 1989 09:46:50 -by- Amit Chatterjee [amitc]
|
|
; ---------------------------------------------------------------
|
|
; The base port addresses in the COMM1,COMM2,COMM3,COMM4 structures
|
|
; are being zeroed out when the corresponding comm port is closed.
|
|
; This is because the 'ReactivateOpenCommPort' function looks at it
|
|
; and if the port address is not zero decides that comm ports are
|
|
; open.
|
|
; ***************************************************************
|
|
; Tue Nov 14 1989 18:42:00 ADDED TWO EXPORTED FUNCTIONS
|
|
; ---------------------------------------------------------------
|
|
; Added two exported functions 'SuspendOpenCommPorts' and
|
|
; 'ReactivateOpenCommPorts' for 286 winoldap support. The first one simply
|
|
; releases the comm int vects and installs the originall one, the second one
|
|
; hooks back the comm driver comm vectors and then reads the receive buffer,
|
|
; the status and the IIR registers of all the available comm ports to
|
|
; remove pending interrupts. It also reprograms the PIC to enable interrupts
|
|
; on all open comm channels.
|
|
; ---------------------------------------------------------------
|
|
; -by- Amit Chatterjee [amitc]
|
|
; ***************************************************************
|
|
; Tue Aug 30 198? 12:52:00 MAJOR FIX TO HANDLE 8250B
|
|
; ---------------------------------------------------------------
|
|
;
|
|
; 8250B has the following peculiar charactersistic
|
|
; . The very first time (after reset) the Tx Holding Empty
|
|
; interrupt is enabled, an immediate interrupt is generated
|
|
;
|
|
; . After the first time, switching the Tx Holding Empty
|
|
; interrupt enable bit from disabled to enabled will NOT
|
|
; generate an immediate interrupt (unlike in 8250)
|
|
; Because of this the KICKTX routine fails to set the transmit cycle
|
|
; on if the machine has a 8250B
|
|
;
|
|
; This has been taken care as follows:
|
|
; . For the very first byte that is being transmitted, KICKTX
|
|
; is used to generate the first Tx Holding Empty interrupt
|
|
; . Subsequently, whenever we find that the transmit buffer
|
|
; is empty, we use a SOFTWARE INT (either INT 0Bh, or INT 0Ch)
|
|
; to force the first character out, once this is done the
|
|
; Tx Holding Empty interrupt will be generated once the buffer
|
|
; really is empty
|
|
; . Now we no longer disable the Tx Holding Empty interrupt
|
|
; in the Xmit ISR to ensure that even m/cs with 8250, use
|
|
; the software int to kick the tx interrupt on after the
|
|
; first time.
|
|
; . The software interrupt is also forced whenever an X-ON
|
|
; character is received.
|
|
;
|
|
; The code that implements the above logic is marked out with a line
|
|
; asterixes.
|
|
; ------------------------------------------------------------------
|
|
; -by- Amit Chatterjee [amitc]
|
|
; ******************************************************************
|
|
;
|
|
; 062587 HSFlag and Evtmask in DoLPT. These fields do not exist
|
|
; for LPT type devices. The code which manipulated them
|
|
; was removed
|
|
;
|
|
; KickTx from $SndCom - interrupts were not disabled when
|
|
; calling KickTx.
|
|
;
|
|
; $SetCom - added CLD at the start
|
|
;
|
|
; $SetQue - movsw ==> stosw
|
|
;
|
|
; 111285 Changed the Timeout from 7 to 30 seconds.
|
|
;
|
|
; 110885 Forgot to set EV_RxChar event when a character
|
|
; was received.
|
|
;
|
|
; 102985 INS8250, INS8250B bug with enabling interrupts.
|
|
; Setting ACE_ETBEI in the Interrupt Enable Register
|
|
; will cause an immediate interrupt regardless of
|
|
; whether the transmitter register is empty or not.
|
|
; The first interrupt MAY also be missed.
|
|
;
|
|
; The first case is not a problem since we only enable
|
|
; interrupts if the transmitter register is empty. The
|
|
; second problem was showing up on Microsoft System Cards
|
|
; in PC-XTs. The first interrupt was missed after a cold
|
|
; boot. National claims the fix is to write the register
|
|
; twice, which SEEMS to work...
|
|
;
|
|
; Added timeout code to $TRMCOM. If the number of
|
|
; characters in the output queue doesn't decrease
|
|
; in "Timeout" seconds, then the port will be closed
|
|
; anyway. Also flushed the input queue and added a
|
|
; discard-input flag for the data available interrupt
|
|
; code to discard any input received while terminating
|
|
; a port. $TRMCOM will return an error code if it
|
|
; discarded any output data.
|
|
;
|
|
; Removed infinite timeout test in MSRWait routine.
|
|
; Still bad, but it will timeout around 65 seconds
|
|
; instead of never.
|
|
;
|
|
; 102785 LPT initialization code was jumping to InitCom90,
|
|
; which was setting EFlags[si] to null. Well, LPTs
|
|
; don't have an EFlags field, so the null was getting
|
|
; stuffed over the LSB of BIOSPortLoc of the next LPT
|
|
; device.
|
|
;
|
|
; 101185 Save interrupt vector when opening a comm port
|
|
; and restore it when closing. Would you believe
|
|
; there are actually programs that assume the
|
|
; vector points to a non-specific 8259 ACK and
|
|
; an IRET!
|
|
;
|
|
; 100985 Added MS-NET support to gain exclusive control
|
|
; of an LPT port if DOS 3.x and not running in as
|
|
; a server, receiver, or messenger. Required to
|
|
; keep another application, such as command.com
|
|
; from closing the stream or mixing their output
|
|
; with ours.
|
|
; sudeepb 10-Jan-1993 changed the costly cli/sti with non-trapping
|
|
; FCLI/FSTI macros
|
|
;-----------------------------------------------------------------------;
|
|
|
|
title IBMCom - IBM PC, PC-XT, PC-AT, PS/2 Communications Interface
|
|
|
|
.xlist
|
|
include cmacros.inc
|
|
include comdev.inc
|
|
include ins8250.inc
|
|
include ibmcom.inc
|
|
include vint.inc
|
|
.list
|
|
|
|
externNP GetDEB
|
|
externNP DoLPT
|
|
externNP StringToLPT
|
|
externNP FindCOMPort
|
|
externNP StealPort
|
|
|
|
|
|
sBegin Data
|
|
|
|
externB $MachineID
|
|
|
|
sEnd Data
|
|
|
|
sBegin Code
|
|
assumes cs,Code
|
|
assumes ds,Data
|
|
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $RECCOM - Receive Characters From Device
|
|
;
|
|
; Read Byte From RS232 Input Queue If Data Is Ready
|
|
;
|
|
; LPT ports will return with an indication that no characters are
|
|
; available.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; Returns:
|
|
; 'Z' clear if data available
|
|
; AL = byte
|
|
; Error Returns:
|
|
; 'Z' Set if error or no data
|
|
; AX = error code
|
|
; AX = 0 if no data
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $RECCOM
|
|
$RECCOM proc near
|
|
|
|
push si ;Once again, save some registers
|
|
push di
|
|
call GetDEB ;Get DEB pointer in SI
|
|
jc RecCom10 ;Invalid Port [rkh] ...
|
|
jns RecCom20 ;COM port
|
|
jmp RecCom95 ;LPT port, return no characters
|
|
|
|
RecCom10:
|
|
jmp RecCom100 ; Invalid Port
|
|
|
|
; Before removing any charcters from the input queue, check to see
|
|
; if XON needs to be issued. If it needs to be issued, set the
|
|
; flag that will force it and arm transmit interrupts.
|
|
|
|
RecCom20:
|
|
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
|
|
jz RecCom32 ; No
|
|
test HSFlag[si],EnqReceived+HHSDropped ;Enq recvd or lines dropped?
|
|
jnz RecCom21 ; No Enq recvd & no lines dropped
|
|
jmp RecCom60 ; No Enq recvd & no lines dropped
|
|
RecCom21:
|
|
jmp short RecCom34
|
|
|
|
RecCom32:
|
|
test HSFlag[si],HSSent ;Handshake sent?
|
|
jnz RecCom33 ; No XOFF sent & no lines dropped
|
|
jmp RecCom60 ; No XOFF sent & no lines dropped
|
|
RecCom33:
|
|
|
|
RecCom34:
|
|
mov ax,QInCount[si] ;Get current count of input chars
|
|
cmp ax,[si.DCB_XonLim] ;See if at XOn limit
|
|
ja RecCom60 ;Not at XOn limit yet
|
|
|
|
; If any hardware lines are down, then raise them. Then see
|
|
; about sending XON.
|
|
|
|
mov dx,Port[si] ;Get the port
|
|
mov ah,HHSLines[si] ;Get hardware lines mask
|
|
call DOCLI ;Handle this as a critical section
|
|
mov cl,HSFlag[si] ;Get handshaking flags
|
|
or ah,ah ;Any hardware lines to play with?
|
|
jz RecCom40 ; No
|
|
add dl,ACE_MCR ;--> Modem control register
|
|
in al,dx
|
|
or al,ah ;Turn on the hardware bits
|
|
iodelay
|
|
out dx,al
|
|
and cl,NOT HHSDropped ;Show hardware lines back up
|
|
|
|
RecCom40:
|
|
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
|
|
jz RecCom47 ; No
|
|
test cl,EnqReceived ;Did we receive Enq?
|
|
jz RecCom55 ; No
|
|
and cl,NOT EnqReceived
|
|
jmp short RecCom50
|
|
|
|
RecCom47:
|
|
test cl,XOffSent ;Did we send XOFF?
|
|
jz RecCom55 ; No
|
|
and cl,NOT XOffSent ;Remove XOFF sent flag
|
|
|
|
RecCom50:
|
|
or cl,XOnPending ;Show XON or ACK must be sent
|
|
call KickTx ;Kick xmit if needed
|
|
|
|
RecCom55:
|
|
mov HSFlag[si],cl ;Store handshake flag
|
|
call DOSTI ;Can allow interrupts now
|
|
|
|
; Now we can get down to the business at hand, and remove a character
|
|
; from the receive queue. If a communications error exists, we return
|
|
; that, and nothing else.
|
|
|
|
RecCom60:
|
|
xor ax,ax
|
|
or ax,ComErr[si] ;Any Errors?
|
|
jnz RecCom100 ; Yes, return the error code
|
|
or ax,QInCount[si] ;Get current input char count
|
|
jz RecCom90 ;No characters in the queue
|
|
les di,QInAddr[si] ;Get queue pointer
|
|
assumes es,nothing
|
|
|
|
mov bx,QInGet[si] ;Also get the index to head
|
|
mov al,es:[bx][di] ;Finally, get byte from queue
|
|
inc bx ;Update queue index
|
|
cmp bx,QInSize[si] ;See if time for wrap-around
|
|
jc RecCom70 ;Jump if no wrap
|
|
xor bx,bx ;wrap by zeroing the index
|
|
|
|
RecCom70:
|
|
mov QInGet[si],bx ;Save new head pointer
|
|
dec QInCount[si] ;Dec # of bytes in queue
|
|
|
|
mov cx, [si.QinCount]
|
|
cmp cx, [si.RecvTrigger] ;Q: have we read below trigger?
|
|
jae RecCom80 ; N:
|
|
and [si.NotifyFlagsHI], NOT CN_RECEIVE ; allow timeout notify again
|
|
RecCom80:
|
|
or sp,sp ;Reset PSW.Z
|
|
pop di
|
|
pop si
|
|
ret
|
|
|
|
; No characters in the input queue. Check to see if EOF
|
|
; was received, and return it if it was. Otherwise show
|
|
; no characters.
|
|
|
|
RecCom90:
|
|
test [si.DCB_Flags],fBinary ;Are we doing binary stuff?
|
|
jnz RecCom95 ; Yes, show no characters
|
|
mov al,[si.DCB_EofChar] ;Assume EOF
|
|
test EFlags[si],fEOF ;Has end of file char been received?
|
|
jnz RecCom80 ; Yes, show end of file
|
|
|
|
RecCom95:
|
|
xor ax,ax ;Show no more characters
|
|
|
|
; Return with 'Z' to show error or no characters
|
|
|
|
RecCom100:
|
|
xor cx,cx ;Set PSW.Z
|
|
pop di
|
|
pop si
|
|
ret
|
|
|
|
$RECCOM endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $RECSTR - Receive Characters From Device
|
|
;
|
|
; Read Byte From RS232 Input Queue If Data Is Ready
|
|
;
|
|
; LPT ports will return with an indication that no characters are
|
|
; available.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; ES:DI -> receive buffer
|
|
; CX max bytes to read
|
|
; Returns:
|
|
; 'Z' clear if data available
|
|
; AX = # of bytes read
|
|
; Error Returns:
|
|
; 'Z' Set if error or no data
|
|
; AX = error code
|
|
; AX = 0 if no data
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $RECSTR
|
|
$RECSTR proc near
|
|
|
|
push si ;Once again, save some registers
|
|
push di
|
|
call GetDEB ;Get DEB pointer in SI
|
|
jc RecStr10 ;Invalid Port [rkh] ...
|
|
jns RecStr20 ;COM port
|
|
jmp RecStr95 ;LPT port, return no characters
|
|
|
|
RecStr10:
|
|
jmp RecStr100 ; Invalid Port
|
|
RecStr15:
|
|
jmp RecStr90
|
|
|
|
RecStr20:
|
|
xor ax,ax
|
|
or ax,ComErr[si] ;Any Errors?
|
|
jnz RecStr10 ; Yes, return the error code
|
|
or ax,QInCount[si] ;Get current input char count
|
|
jz RecStr15 ;No characters in the queue
|
|
|
|
cmp cx, ax ;Q: more chars available than can read?
|
|
jbe short RecStr30 ; N:
|
|
mov cx, ax ; Y: adjust # of chars to read
|
|
RecStr30:
|
|
push cx
|
|
mov dx, QInSize[si]
|
|
mov ax, QInGet[si]
|
|
sub dx, ax ; dx = # of bytes before end of buf
|
|
cmp dx, cx ;Q: more avail than can read?
|
|
jbe short RecStr40 ; N:
|
|
mov dx, cx ; Y: adjust avail count
|
|
RecStr40:
|
|
xchg cx, dx ; cx = # of bytes for 1st copy
|
|
sub dx, cx ; dx = # of bytes for 2nd copy
|
|
|
|
push ds
|
|
push si
|
|
lds bx, QInAddr[si]
|
|
mov si, bx
|
|
add si, ax ; ds:si -> first char in buffer
|
|
cld
|
|
rep movsb ; do first copy
|
|
mov cx, dx
|
|
jcxz short RecStr50 ; jump if no 2nd copy needed
|
|
mov si, bx ; ds:si -> start of buffer
|
|
rep movsb ; do 2nd copy
|
|
RecStr50:
|
|
sub si, bx ; si = new QInGet
|
|
mov bx, si
|
|
pop si
|
|
pop ds
|
|
pop cx
|
|
call DOCLI
|
|
mov QInGet[si], bx ; update QInGet
|
|
sub QInCount[si], cx ; update count
|
|
mov ax, QInCount[si]
|
|
call DOSTI
|
|
|
|
cmp ax, [si.RecvTrigger] ;Q: have we read below trigger?
|
|
jae @F ; N:
|
|
and [si.NotifyFlagsHI], NOT CN_RECEIVE ; allow timeout notify again
|
|
@@:
|
|
|
|
; Check to see if XON needs to be issued. If it needs to be issued, set the
|
|
; flag that will force it and arm transmit interrupts.
|
|
|
|
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
|
|
jz @F ; No
|
|
test HSFlag[si],EnqReceived+HHSDropped ;Enq recvd or lines dropped?
|
|
jnz RecStr58 ; No Enq recvd & no lines dropped
|
|
jmp RecStr80 ; No Enq recvd & no lines dropped
|
|
RecStr58:
|
|
jmp short RecStr60
|
|
|
|
@@:
|
|
test HSFlag[si],HSSent ;Handshake sent?
|
|
jnz RecStr59 ; No XOFF sent & no lines dropped
|
|
jmp RecStr80 ; No XOFF sent & no lines dropped
|
|
RecStr59:
|
|
|
|
RecStr60:
|
|
;ax = current count of input chars
|
|
cmp ax,[si.DCB_XonLim] ;See if at XOn limit
|
|
ja RecStr80 ;Not at XOn limit yet
|
|
|
|
;; int 1
|
|
; If any hardware lines are down, then raise them. Then see
|
|
; about sending XON.
|
|
|
|
mov dx,Port[si] ;Get the port
|
|
mov ah,HHSLines[si] ;Get hardware lines mask
|
|
push cx
|
|
call DOCLI ;Handle this as a critical section
|
|
mov cl,HSFlag[si] ;Get handshaking flags
|
|
or ah,ah ;Any hardware lines to play with?
|
|
jz @F ; No
|
|
add dl,ACE_MCR ;--> Modem control register
|
|
in al,dx
|
|
or al,ah ;Turn on the hardware bits
|
|
iodelay
|
|
out dx,al
|
|
and cl,NOT HHSDropped ;Show hardware lines back up
|
|
|
|
@@:
|
|
test [si.DCB_Flags],fEnqAck+fEtxAck ;Enq or Etx Ack?
|
|
jz @F ; No
|
|
test cl,EnqReceived ;Did we receive Enq?
|
|
jz RecStr70 ; No
|
|
and cl,NOT EnqReceived
|
|
jmp short RecStr65
|
|
|
|
@@:
|
|
test cl,XOffSent ;Did we send XOFF?
|
|
jz RecStr70 ; No
|
|
and cl,NOT XOffSent ;Remove XOFF sent flag
|
|
|
|
RecStr65:
|
|
or cl,XOnPending ;Show XON or ACK must be sent
|
|
call KickTx ;Kick xmit if needed
|
|
|
|
RecStr70:
|
|
mov HSFlag[si],cl ;Store handshake flag
|
|
call DOSTI ;Can allow interrupts now
|
|
pop cx
|
|
|
|
RecStr80:
|
|
mov ax, cx
|
|
or sp,sp ;Reset PSW.Z
|
|
pop di
|
|
pop si
|
|
ret
|
|
|
|
; No characters in the input queue. Check to see if EOF
|
|
; was received, and return it if it was. Otherwise show
|
|
; no characters.
|
|
|
|
RecStr90:
|
|
test [si.DCB_Flags],fBinary ;Are we doing binary stuff?
|
|
jnz RecStr95 ; Yes, show no characters
|
|
mov al,[si.DCB_EofChar] ;Assume EOF
|
|
test EFlags[si],fEOF ;Has end of file char been received?
|
|
jnz RecStr80 ; Yes, show end of file
|
|
|
|
RecStr95:
|
|
xor ax,ax ;Show no more characters
|
|
|
|
; Return with 'Z' to show error or no characters
|
|
|
|
RecStr100:
|
|
xor cx,cx ;Set PSW.Z
|
|
pop di
|
|
pop si
|
|
ret
|
|
|
|
$RECSTR endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $SNDIMM - Send A Character Immediately
|
|
;
|
|
; This routine either sends a character to the port immediately,
|
|
; or places the character in a special location which is used by
|
|
; the next transmit interrupt to transmit the character prior to
|
|
; those in the normal transmit queue.
|
|
;
|
|
; For LPT ports, the character is always sent immediately.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; AL = Character
|
|
; Returns:
|
|
; AX = 0
|
|
; Error Returns:
|
|
; AX = 8000H if Bad ID
|
|
; AX = 4000H if couldn't send because another character
|
|
; transmitted "immediately" is waiting to be sent
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $SNDIMM
|
|
$SNDIMM proc near
|
|
|
|
push si
|
|
call GetDEB ;Get pointer to the DEB
|
|
jc SendImm20 ;Bad ID, return an error
|
|
jns SendImm10 ;Its a COM port
|
|
|
|
|
|
; For LPT ports, call DoLPT to do the dirty work. If DoLPT
|
|
; returns an error code, map it to 4000h.
|
|
|
|
xor ch,ch ;Show xmit character
|
|
call DoLPT ;Do the work here
|
|
or ax,ax ;Error occur?
|
|
jz SendImm20 ; No, show all is OK
|
|
mov ax,4000h ; Yes, return 4000h
|
|
jmp short SendImm20
|
|
|
|
SendImm10:
|
|
mov dl, al
|
|
mov ax,4000h ;In case we cannot send
|
|
test EFlags[si],fTxImmed ;Another char waiting "immediately"?
|
|
jnz SendImm20 ; Yes, return error
|
|
mov ah,dl ;Set char for TXI
|
|
call DOCLI ;TXI is critical section code
|
|
call TXI ;Set character to tx immediately
|
|
call DOSTI
|
|
xor ax,ax ;Show all is OK
|
|
|
|
SendImm20:
|
|
pop si
|
|
ret
|
|
|
|
$SNDIMM endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $SNDCOM - Send Byte To Port
|
|
;
|
|
; The given byte is sent to the passed port if possible.
|
|
; If the output queue is full, an error will be returned.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; AL = Character
|
|
; Returns:
|
|
; AX = 0
|
|
; Error Returns:
|
|
; AX = error code
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $SNDCOM
|
|
$SNDCOM proc near
|
|
|
|
push si
|
|
push di
|
|
call GetDEB ;--> DEB
|
|
jc SendCom40 ;Invalid ID
|
|
jns SendCom20 ;Its a COM port
|
|
|
|
; Handle the transmission of a LPT character. The ROM BIOS int 17
|
|
; call will be made to do the transmission. The port address will
|
|
; be restored during the call, then zeroed out upon return.
|
|
|
|
SendCom10:
|
|
xor ch,ch ;Show xmit character
|
|
call DoLPT ;Do the work here
|
|
jmp short SendCom40 ;Return the status to caller
|
|
|
|
; Send a character to a COM port. Return an error if control
|
|
; line timeout occurs or there is no room in the output queue.
|
|
|
|
SendCom20:
|
|
push ax ;Save character
|
|
|
|
call MSRWait ;See if lines are correct for output
|
|
pop ax ;Restore char
|
|
jnz SendCom60 ;Timeout occured, return error
|
|
mov cx,QOutSize[si] ;See if queue is full
|
|
cmp cx,QOutCount[si]
|
|
jle SendCom50 ;There is no room in the queue
|
|
les di,QOutAddr[si] ;--> output queue
|
|
assumes es,nothing
|
|
|
|
mov bx,QOutPut[si] ;Get index into queue
|
|
mov es:[bx][di],al ;Store the byte
|
|
inc bx ;Update index
|
|
cmp bx,cx ;Wrap time?
|
|
jc SendCom30 ; No
|
|
xor bx,bx ;Wrap-around is a new zero pointer
|
|
|
|
SendCom30:
|
|
|
|
call DOCLI
|
|
mov QOutPut[si],bx ;Store updated pointer
|
|
mov ax,QOutCount[si] ; get the count
|
|
inc ax ; have the updated value in AX for test later
|
|
mov QOutCount[si],ax ;Update queue population
|
|
call KickTx ;Make sure xmit interrupt is armed
|
|
call DOSTI
|
|
|
|
xor ax,ax ;Show no error (that we know of)
|
|
|
|
;****************************************************************************
|
|
|
|
SendCom40:
|
|
pop di
|
|
pop si
|
|
ret
|
|
|
|
SendCom50:
|
|
or by ComErr+1[si],HIGH CE_TXFULL
|
|
.errnz LOW CE_TXFULL
|
|
|
|
SendCom60:
|
|
mov ax,ComErr[si] ;Return error code to caller
|
|
jmp short SendCom40
|
|
|
|
$SNDCOM endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $SNDCOMSTR - Send buffer To Port
|
|
;
|
|
; The given buffer is sent to the passed port if possible.
|
|
; Once the output queue is detected as being full, a CE_TXFULL error
|
|
; will be indicated and AX will be returned as the # of chars actually
|
|
; queued.
|
|
;
|
|
; Entry:
|
|
; DS:SI --> DEB
|
|
; ES:DI --> buffer
|
|
; Returns:
|
|
; AX = # of bytes queued
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,DI,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $SNDCOMSTR
|
|
$SNDCOMSTR proc near
|
|
|
|
push cx ; save count
|
|
call GetDEB
|
|
jc cws_error ; jump if id invalid
|
|
jns cws_comm ; jump if COM port
|
|
|
|
call StringToLPT
|
|
pop cx ; discard saved count, ax = # transfered
|
|
jmp short cws_exit
|
|
|
|
cws_error:
|
|
pop ax
|
|
sub ax, cx ; ax = # transfered
|
|
cws_exit:
|
|
ret
|
|
|
|
cws_comm:
|
|
call MSRWait ;See if lines are correct for output
|
|
pop cx
|
|
push cx
|
|
jnz cws_error ;Timeout occured, return error
|
|
|
|
mov dx, QOutSize[si] ;See if queue is full
|
|
sub dx, QOutCount[si] ; dx = # of chars free in queue
|
|
jg scs_loop
|
|
jmp scs_full ;There is no room in the queue
|
|
|
|
scs_loop:
|
|
push cx ; save count left to send
|
|
cmp cx, dx ;Q: room for buffer in queue?
|
|
jbe @f ; Y:
|
|
mov cx, dx ; N: adjust size to send
|
|
@@:
|
|
push cx ; save # of chars which will be copied
|
|
push si
|
|
push ds
|
|
push di
|
|
push es
|
|
les bx,QOutAddr[si] ;--> output queue
|
|
assumes es,nothing
|
|
|
|
mov dx, QOutSize[si]
|
|
mov di, QOutPut[si] ;Get index into queue
|
|
sub dx, di ; dx = # of free chars before end of queue
|
|
cmp dx, cx
|
|
jbe @f
|
|
mov dx, cx
|
|
@@:
|
|
xchg cx, dx ; cx = # of chars for 1st copy
|
|
sub dx, cx ; dx = # of chars for 2nd copy
|
|
pop ds
|
|
pop si ; ds:si -> src buffer
|
|
assumes ds,nothing
|
|
add di, bx ; es:di -> current pos in queue
|
|
cld
|
|
rep movsb ; copy first section
|
|
mov cx, dx
|
|
jcxz @F
|
|
mov di, bx ; circle back to start of queue
|
|
rep movsb ; copy 2nd section
|
|
@@:
|
|
sub di, bx ; di last index into queue
|
|
mov dx, di
|
|
mov di, si ; last location in src buffer
|
|
mov si, ds
|
|
mov es, si ; es:di -> last loc in src buf
|
|
pop ds
|
|
pop si ; ds:si -> ComDEB
|
|
assumes ds,data
|
|
pop bx ; # of chars copied
|
|
call DOCLI
|
|
mov QOutPut[si], dx ;new index into queue
|
|
add QOutCount[si], bx
|
|
call KickTx
|
|
call DOSTI
|
|
pop cx
|
|
sub cx, bx ; # of chars left to send
|
|
jnz scs_full_2 ; jump if none
|
|
scs_exit:
|
|
pop ax
|
|
sub ax, cx ; ax = # transfered
|
|
ret
|
|
|
|
scs_full:
|
|
call DOCLI
|
|
call KickTx
|
|
call DOSTI
|
|
scs_full_2:
|
|
or by ComErr+1[si],HIGH CE_TXFULL
|
|
.errnz LOW CE_TXFULL
|
|
jmp scs_exit
|
|
|
|
$SNDCOMSTR endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $FLUSH - Flush The Input and Output Queues
|
|
;
|
|
; This is a hard initialization of the transmit and receive queue's,
|
|
; which immediately empties the given queue.
|
|
;
|
|
; LPT ports will just return the device error word
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; BH = Queue # to clear (0=Tx, 1=Rx)
|
|
; Returns:
|
|
; AX = Device Error Word. (Not reset)
|
|
; Error Returns:
|
|
; AX = error code
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $FLUSH
|
|
$FLUSH proc near
|
|
|
|
push si
|
|
push di
|
|
call GetDEB ;si --> DEB
|
|
jc Flush40 ;Invalid ID
|
|
js Flush30 ;LPT port, return any error
|
|
|
|
mov cx,QOutCount-QInCount ;# of bytes to zero
|
|
lea di,QInCount[si] ;--> receive queue data
|
|
or bh,bh ;Transmit queue?
|
|
jnz Flush10 ; No, input queue
|
|
add di,cx ; Yes, --> xmit queue data
|
|
|
|
Flush10:
|
|
cld
|
|
push ds
|
|
pop es
|
|
assumes es,nothing
|
|
|
|
xor al,al
|
|
call DOCLI ;Time to worry about critical sections
|
|
rep stosb
|
|
call DOSTI
|
|
.errnz QInGet-QInCount-2
|
|
.errnz QInPut-QInGet-2
|
|
.errnz QOutCount-QInPut-2
|
|
.errnz QOutGet-QOutCount-2
|
|
.errnz QOutPut-QOutGet-2
|
|
|
|
or bh,bh ;Rx queue?
|
|
jz Flush30 ; No, xmit queue
|
|
|
|
|
|
; If the queue to be cleared is the receive queue, any
|
|
; hardware handshake must be cleared to prevent a possible
|
|
; deadlock situation. Since we just zeroed the queue count,
|
|
; a quick call to $RecCom should do wonders to clear any
|
|
; receive handshake (i.e. send XON if needed).
|
|
|
|
Flush20:
|
|
call $RECCOM ;Take care of handshakes here
|
|
|
|
Flush30:
|
|
mov ax,ComErr[si] ;And return the error word.
|
|
|
|
Flush40:
|
|
pop di
|
|
pop si
|
|
ret
|
|
|
|
$FLUSH endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; TXI - Transmit A Character Immediately
|
|
;
|
|
; Set up a character to be transmitted "immediately".
|
|
; by placing the character in a location that guarantees
|
|
; it to be the next character transmitted.
|
|
;
|
|
; The check to see if the immediate character can be placed has
|
|
; already been made prior to entry.
|
|
;
|
|
; Interrupts must be disabled before entering this code
|
|
;
|
|
; Entry:
|
|
; AH = Character
|
|
; DS:SI --> DEB
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; BX,CX,SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; L,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public TXI ;Public for debugging
|
|
TXI proc near
|
|
|
|
; call DOCLI ;Must be done by caller!
|
|
or EFlags[si],fTxImmed ;Show char to xmit
|
|
mov ImmedChar[si],ah ;Set character to transmit next
|
|
; jmp short KickTx ;Kick Xmit just in case
|
|
errn$ KickTx
|
|
|
|
TXI endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; KickTx - Kick Transmitter
|
|
;
|
|
; "Kick" the transmitter interrupt routine into operation.
|
|
; If the Transmitter Holding Register isn't empty, then
|
|
; nothing needs to be done. If it is empty, then the xmit
|
|
; interrupt needs to enabled in the IER.
|
|
;
|
|
; Entry:
|
|
; DS:SI --> DEB
|
|
; INTERRUPTS DISABLED!
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; BX,CX,SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; AX,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public KickTx ;Public for debugging
|
|
KickTx proc near
|
|
|
|
; call DOCLI ;Done by caller
|
|
test [si.VCDflags], 1 ;Q: we still own port?
|
|
jnz can_we_steal ; N:
|
|
|
|
enable_int:
|
|
mov dx,Port[si] ;Get device I/O address
|
|
add dl,ACE_IER ;--> Interrupt enable register
|
|
in al,dx ;Get current IER state
|
|
test al,ACE_ETBEI ;Interrupt already enabled?
|
|
jnz KickTx10 ; Yes, don't reenable it
|
|
or al,ACE_ETBEI ; No, enable it
|
|
out dx,al
|
|
iodelay ;8250, 8250-B bug requires
|
|
out dx,al ; writting register twice
|
|
|
|
KickTx10:
|
|
; call DOSTI ;Done by caller
|
|
ret
|
|
|
|
can_we_steal:
|
|
call StealPort ; call VCD to see if we can steal
|
|
; the port back
|
|
jnc short enable_int ; jump, if we got it
|
|
;
|
|
; flush out queue
|
|
;
|
|
xor ax, ax
|
|
mov [si.QOutCount], ax
|
|
mov [si.QOutMod], ax
|
|
mov ax, [si.QOutGet]
|
|
mov [si.QOutPut], ax
|
|
jmp short KickTx10 ; N:
|
|
|
|
KickTx endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; MSRWait - Modem Status Register Wait
|
|
;
|
|
; This routine checks the modem status register for CTS, DSR,
|
|
; and/or RLSD signals. If a timeout occurs while checking,
|
|
; the appropriate error code will be returned.
|
|
;
|
|
; This routine will not check for any signal with a corresponding
|
|
; time out value of 0 (ignore line).
|
|
;
|
|
; Entry:
|
|
; SI --> DEB
|
|
; Returns:
|
|
; AL = error code
|
|
; ComErr[si] updated
|
|
; 'Z' set if no timeout
|
|
; Error Returns:
|
|
; None
|
|
; Registers Destroyed:
|
|
; AX,CX,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public MSRWait ;Public for debugging
|
|
|
|
MSRWait proc near
|
|
|
|
push di
|
|
|
|
MSRRestart:
|
|
xor di,di ;Init Timer
|
|
|
|
MSRWait10:
|
|
mov cx,11 ;Init Delay counter (used on non-ATs)
|
|
|
|
MSRWait20:
|
|
xor dh,dh ;Init error accumulator
|
|
mov al,MSRShadow[si] ;Get Modem Status
|
|
and al,MSRMask[si] ;Only leave bits of interest
|
|
xor al,MSRMask[si] ;0 = line high
|
|
jz MSRWait90 ;All lines of interest are high
|
|
mov ah,al ;ah has 1 bits for down lines
|
|
|
|
shl ah,1 ;Line Signal Detect low?
|
|
jnc MSRWait30 ; No, it's high
|
|
.errnz ACE_RLSD-10000000b
|
|
cmp di,[si.DCB_RlsTimeout] ;RLSD timeout yet?
|
|
jb MSRWait30 ; No
|
|
or dh,CE_RLSDTO ;Show modem status timeout
|
|
|
|
MSRWait30:
|
|
shl ah,1 ;Data Set Ready low?
|
|
shl ah,1
|
|
.errnz ACE_DSR-00100000b
|
|
jnc MSRWait40 ; No, it's high
|
|
cmp di,[si.DCB_DsrTimeout] ;DSR timeout yet?
|
|
jb MSRWait40 ; No
|
|
or dh,CE_DSRTO ;Show data set ready timeout
|
|
|
|
MSRWait40:
|
|
shl ah,1 ;CTS low?
|
|
jnc MSRWait50 ; No, it's high
|
|
.errnz ACE_CTS-00010000b
|
|
cmp di,[si.DCB_CtsTimeout] ;CTS timeout yet?
|
|
jb MSRWait50 ; No
|
|
or dh,CE_CTSTO ;Show clear to send timeout
|
|
|
|
MSRWait50:
|
|
or dh,dh ;Any timeout occur?
|
|
jnz MSRWait80 ; Yes
|
|
|
|
cmp [$MachineID],0FCh ;Is this a PC-AT? [rkh debug for PS/2]
|
|
je MSRWait60 ; Yes, use ROM function
|
|
loop MSRWait20 ; No, continue until timeout
|
|
jmp short MSRWait70 ;Should have taken about a millisecond
|
|
|
|
MSRWait60:
|
|
push bx ;Special SALMON ROM routine to delay
|
|
push di
|
|
xor cx,cx ;Number of Microseconds to delay
|
|
mov dx,1000 ; in CX:DX
|
|
mov ah,86h
|
|
int 15h ;Wait 1 millisecond
|
|
pop di
|
|
pop bx
|
|
|
|
MSRWait70:
|
|
inc di ;Timer +1
|
|
jmp short MSRWait10 ;Until Timeout or Good status
|
|
|
|
MSRWait80:
|
|
xor ah,ah
|
|
mov al,dh
|
|
or by ComErr[si],al ;Return updated status
|
|
.errnz HIGH CE_CTSTO
|
|
.errnz HIGH CE_DSRTO
|
|
.errnz HIGH CE_RLSDTO
|
|
|
|
MSRWait90:
|
|
or al,al ;Set 'Z' if no timeout
|
|
pop di
|
|
ret
|
|
|
|
MSRWait endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $EVT - Set Event Mask
|
|
;
|
|
; Set up event word and mask. Returns a pointer to a word in which
|
|
; certain bits, as enabled by the mask, will be set when certain
|
|
; events occur.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; BX = Event enable mask
|
|
; Returns:
|
|
; DX:AX --> event word.
|
|
; Error Returns:
|
|
; AX = 0 if error
|
|
; Registers Preserved:
|
|
; BX,CX,SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; AX,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $EVT
|
|
$EVT proc near
|
|
|
|
push si
|
|
xor dx,dx ;In case of error
|
|
call GetDEB ;Get pointer to DEB
|
|
mov ax,dx ;Finish setting error return value
|
|
jc Evt10 ;Illegal id, return error
|
|
js Evt10 ;LPTx, return error
|
|
mov EvtMask[si],bx ;Save the new event mask
|
|
lea ax,EvtWord[si] ;Get address of event word
|
|
mov dx,ds ; into dx:ax
|
|
|
|
Evt10:
|
|
pop si
|
|
ret
|
|
|
|
$EVT endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $EVTGET - Get Event Word
|
|
;
|
|
; Return and clear fields in the event word. This routine MUST be used
|
|
; by applications to read the event word, as it is the ONLY way they
|
|
; can be assured that an event is not lost between reading the flags
|
|
; and resetting some.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; BX = Event clear mask
|
|
; Returns:
|
|
; AX = event word
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; AX,CX,SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; BX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $EVTGET
|
|
$EVTGET proc near
|
|
|
|
push si
|
|
call GetDEB
|
|
mov ah,0 ;In case of error (AL already 0)
|
|
jc EvtGet10 ;Illegal ID
|
|
js EvtGet10 ;Illegal ID
|
|
call DOCLI ;No interrupts allowed
|
|
mov ax,EvtWord[si] ;Get the current event word
|
|
not bx ;Convert mask for our purposes
|
|
and bx,ax ;Clear events that user wants us to
|
|
mov EvtWord[si],bx ;And save those results
|
|
call DOSTI ;Magic over
|
|
|
|
EvtGet10:
|
|
pop si
|
|
ret
|
|
|
|
$EVTGET endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $STACOM - Return Status Information
|
|
;
|
|
; Returns the number of bytes in both queues.
|
|
;
|
|
; LPT ports will show both queues empty.
|
|
; and resetting some.
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; ES:BX = Pointer to status structure to be updated.
|
|
; = Null if not to update
|
|
; Returns:
|
|
; AX = comm error word
|
|
; Status Structure Updated.
|
|
; Error Returns:
|
|
; AX = error code
|
|
; Registers Preserved:
|
|
; SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $STACOM
|
|
$STACOM proc near
|
|
|
|
push si
|
|
call GetDEB ;Get DEB pointer in SI
|
|
jc StaCom30 ;Invalid ID
|
|
mov cx,es ;Is the pointer NULL?
|
|
or cx,bx
|
|
jz StaCom25 ; Yes, just return error code
|
|
xor cx,cx
|
|
xor dx,dx
|
|
or ah,ah ;Set 'S' if LPT port
|
|
mov ax,cx ;For LPTs, everything is zero
|
|
js StaCom20 ;LPT port
|
|
|
|
; Need to get the status for a com port. Since not all the
|
|
; status is contained within EFlags, it has to be assembled.
|
|
; Also note that currently there is no way to specify RLSD
|
|
; as a handshaking line, so fRLSDHold is always returned false.
|
|
|
|
mov al,MSRShadow[si] ;Get state of hardware lines
|
|
and al,OutHHSLines[si] ;Mask off required bits
|
|
xor al,OutHHSLines[si] ;1 = line low
|
|
mov cl,4 ;Align bits
|
|
shr al,cl ;al = fCTSHold + fDSRHold
|
|
.errnz ACE_CTS-00010000b
|
|
.errnz ACE_DSR-00100000b
|
|
.errnz fCTSHold-00000001b
|
|
.errnz fDSRHold-00000010b
|
|
|
|
mov ah,HSFlag[si] ;Get fXOffHold+fXOffSent
|
|
and ah,XOffReceived+XOffSent
|
|
or al,ah
|
|
|
|
.errnz XOffReceived-fXOFFHold
|
|
.errnz XOffSent-fXOFFSent
|
|
|
|
mov ah,EFlags[si] ;Get fEOF+fTxImmed
|
|
and ah,fEOF+fTxImmed
|
|
or al,ah
|
|
|
|
mov cx,QInCount[si] ;Get input queue count
|
|
mov dx,QOutCount[si] ;Get tx queue count
|
|
|
|
StaCom20:
|
|
mov es:[bx.COMS_BitMask1],al
|
|
mov es:[bx.COMS_cbInQue],cx
|
|
mov es:[bx.COMS_cbOutQue],dx
|
|
|
|
StaCom25:
|
|
xor ax,ax ;Return old com error
|
|
xchg ax,ComErr[si] ; and clear it out
|
|
|
|
StaCom30:
|
|
pop si
|
|
ret
|
|
|
|
$STACOM endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $SetBrk - Set Break
|
|
;
|
|
; Clamp the Tx data line low. Does not wait for the
|
|
; transmitter holding register and shift registers to empty.
|
|
;
|
|
; LPT ports will just return the comm error word
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; Returns:
|
|
; AX = comm error word
|
|
; Error Returns:
|
|
; AX = error code
|
|
; Registers Preserved:
|
|
; SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $SETBRK
|
|
$SETBRK proc near
|
|
|
|
mov cx,0FF00h+ACE_SB ;Will be setting break
|
|
jmp short ClrBrk10
|
|
.errnz BreakSet-ACE_SB ;Must be same bits
|
|
|
|
$SETBRK endp
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $CLRBRK - Clear Break
|
|
;
|
|
; Release any BREAK clamp on the Tx data line.
|
|
;
|
|
; LPT ports will just return the comm error word
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; Returns:
|
|
; AX = comm error word
|
|
; Error Returns:
|
|
; AX = error code
|
|
; Registers Preserved:
|
|
; SI,DI,DS,ES
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $CLRBRK
|
|
$CLRBRK proc near
|
|
|
|
mov cx,(NOT ACE_SB) SHL 8
|
|
.errnz BreakSet-ACE_SB ;Must be same bits
|
|
|
|
ClrBrk10:
|
|
push si
|
|
call GetDEB ;Get DEB address
|
|
jc ClrBrk30 ;Invalid ID
|
|
js ClrBrk20 ;Ignored for LPT ports
|
|
call DOCLI
|
|
and HSFlag[si],ch ;Set or clear the BreakSet bit
|
|
or HSFlag[si],cl
|
|
|
|
; ch = mask to remove bits in the Line Control Register
|
|
; cl = mask to turn bits on in the Line Control Register
|
|
|
|
mov dx,Port[si] ;Get comm device base I/O port
|
|
add dl,ACE_LCR ;Point at the Line Control Regieter
|
|
in al,dx ;Get old line control value
|
|
and al,ch ;Turn off desired bits
|
|
or al,cl ;Turn on desired bits
|
|
iodelay
|
|
out dx,al ;Output New LCR.
|
|
call DOSTI
|
|
|
|
ClrBrk20:
|
|
mov ax,ComErr[si] ;Return Status Word
|
|
|
|
ClrBrk30:
|
|
pop si
|
|
ret
|
|
|
|
$CLRBRK endp
|
|
|
|
page
|
|
|
|
;----------------------------Public Routine-----------------------------;
|
|
;
|
|
; $EXTCOM - Extended Comm Functions
|
|
;
|
|
; A number of extended functions are routed through this entry point.
|
|
;
|
|
; Functions currently implemented:
|
|
;
|
|
; 0: Ignored
|
|
; 1: SETXOFF - Exactly as if X-OFF character has been received.
|
|
; 2: SETXON - Exactly as if X-ON character has been received.
|
|
; 3: SETRTS - Set the RTS signal
|
|
; 4: CLRRTS - Clear the RTS signal
|
|
; 5: SETDTR - Set the DTR signal
|
|
; 6: CLRDTR - Clear the DTR signal
|
|
; 7: RESET - Yank on reset line if available (LPT devices)
|
|
;
|
|
; Entry:
|
|
; AH = Device ID
|
|
; BL = Function Code
|
|
; (0-127 are MS-defined, 128-255 are OEM defined)
|
|
; Returns:
|
|
; AX = comm error word
|
|
; Error Returns:
|
|
; AX = error code
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
|
|
; Dispatch table for the extended functions
|
|
|
|
ExtTab dw ExtComDummy ;Function 0: Never Mind
|
|
dw ExtCom_FN1 ;1: Set X-Off
|
|
dw ExtCom_FN2 ;2: Clear X-Off
|
|
dw ExtCom_FN3 ;3: Set RTS
|
|
dw ExtCom_FN4 ;4: Clear RTS
|
|
dw ExtCom_FN5 ;5: Set DSR
|
|
dw ExtCom_FN6 ;6: Clear DSR
|
|
dw ExtCom_FN7 ;7: Reset printer
|
|
dw ExtCom_FN8 ;8: Get Max LPT Port
|
|
dw ExtCom_FN9 ;9: Get Max COM Port
|
|
dw ExtCom_FN10 ;10: Get COM Port Base & IRQ
|
|
dw ExtCom_FN10 ;11: Get COM Port Base & IRQ
|
|
%OUT fix this for bld 32 -- GetBaseIRQ is now 10
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public $EXTCOM
|
|
$EXTCOM proc near
|
|
|
|
push si
|
|
push di
|
|
call GetDEB ;Get DEB pointer
|
|
jc ExtCom40 ;Invalid ID, return error
|
|
mov dx,Port[si] ; get port address
|
|
jns ExtCom10 ;Its a COM port
|
|
cmp bl,7 ;RESET extended function?
|
|
jne ExtCom30 ; No, return error word
|
|
jmp short ExtCom20 ; Yes, invoke the function
|
|
|
|
ExtCom10:
|
|
cmp bl,11 ;Last fcn supported
|
|
ja ExtCom30 ;Not an implemented function.
|
|
|
|
ExtCom20:
|
|
xor bh,bh
|
|
add bx,bx ;Shift for the call
|
|
call DOCLI ;Consider as critical sections
|
|
call ExtTab[bx] ; and perform the function
|
|
call DOSTI
|
|
jc ExtCom40 ; jump if sub returns data in DX:AX
|
|
|
|
ExtCom30:
|
|
mov ax,ComErr[si] ;Return standard error word
|
|
xor dx, dx
|
|
|
|
ExtCom40:
|
|
pop di
|
|
pop si
|
|
|
|
ret
|
|
|
|
$EXTCOM endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN1 - Extended Function Set X-Off
|
|
;
|
|
; Analagous to receiving an X-OFF character. Bufferred transmision of
|
|
; characters is halted until an X-ON character is received, or until
|
|
; we fake that with a Clear X-Off call.
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN1
|
|
ExtCom_FN1 proc near
|
|
|
|
or HSFlag[si],XOffReceived
|
|
ExtComDummy:
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN1 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN2 - Extended Function Clear X-Off
|
|
;
|
|
; Analagous to receiving an X-ON character. Buffered
|
|
; transmission of characters is restarted.
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN2
|
|
ExtCom_FN2 proc near
|
|
|
|
and HSFlag[si],NOT XOffReceived
|
|
call KickTx ;Kick transmitter interrupts on
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN2 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN3 - Extended Function Set RTS
|
|
;
|
|
; Set the RTS signal active.
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN3
|
|
ExtCom_FN3 proc near
|
|
|
|
add dl,ACE_MCR ;Point at Modem Control Register
|
|
in al,dx ;Get current settings
|
|
or al,ACE_RTS ;Set RTS
|
|
iodelay
|
|
out dx,al ;And update
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN3 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN4 - Extended Function Clear RTS
|
|
;
|
|
; Set the RTS signal inactive.
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN4
|
|
ExtCom_FN4 proc near
|
|
|
|
add dl,ACE_MCR ;Point at Modem Control Register
|
|
in al,dx ;Get current settings
|
|
and al,NOT ACE_RTS ;Clear RTS
|
|
iodelay
|
|
out dx,al ;And update
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN4 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN5 - Extended Function Set DTR
|
|
;
|
|
; Set the DTR signal active.
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN5
|
|
ExtCom_FN5 proc near
|
|
|
|
add dl,ACE_MCR ;Point at Modem Control Register
|
|
in al,dx ;Get current settings
|
|
or al,ACE_DTR ;Set DTR
|
|
iodelay
|
|
out dx,al ;And update
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN5 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN6 - Extended Function Clear DTR
|
|
;
|
|
; Set the DTR signal inactive.
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN6
|
|
ExtCom_FN6 proc near
|
|
|
|
add dl,ACE_MCR ;Point at Modem Control Register
|
|
in al,dx ;Get current settings
|
|
and al,NOT ACE_DTR ;Clear DTR
|
|
iodelay
|
|
out dx,al ;And update
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN6 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN7 - Extended Function Reset Printer
|
|
;
|
|
; Assert the RESET line on an LPT port
|
|
;
|
|
; Entry:
|
|
; interrupts disabled
|
|
; dx = port base address
|
|
; Returns:
|
|
; None
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN7
|
|
ExtCom_FN7 proc near
|
|
|
|
call DOSTI ;Not called at interrupt time
|
|
mov ch,1 ;ROM BIOS Reset Port
|
|
call DoLPT ;Perform the function
|
|
clc
|
|
ret
|
|
|
|
ExtCom_FN7 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN8 - Get Num Ports
|
|
;
|
|
; Entry:
|
|
; Returns:
|
|
; AX = Max LPT port id
|
|
; DX = 0
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN8
|
|
ExtCom_FN8 proc near
|
|
|
|
mov ax, MAXLPT + LPTx
|
|
xor dx, dx
|
|
stc
|
|
ret
|
|
|
|
ExtCom_FN8 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN9 - Get Max COM Port
|
|
;
|
|
; Entry:
|
|
; Returns:
|
|
; AX = Max COM port id
|
|
; DX = 0
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; SI,DI,DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN9
|
|
ExtCom_FN9 proc near
|
|
|
|
mov ax, MAXCOM
|
|
xor dx, dx
|
|
stc
|
|
ret
|
|
|
|
ExtCom_FN9 endp
|
|
page
|
|
|
|
;----------------------------Private-Routine----------------------------;
|
|
;
|
|
; ExtCom_FN10 - Get COM Port Bas & IRQ
|
|
;
|
|
; Entry:
|
|
; AH = com id
|
|
; DS:SI -> DEB
|
|
; Returns:
|
|
; AX = base
|
|
; DX = irq
|
|
; Error Returns:
|
|
; None
|
|
; Registers Preserved:
|
|
; DS
|
|
; Registers Destroyed:
|
|
; AX,BX,CX,DX,DI,ES,FLAGS
|
|
; History:
|
|
;-----------------------------------------------------------------------;
|
|
|
|
;------------------------------Pseudo-Code------------------------------;
|
|
; {
|
|
; }
|
|
;-----------------------------------------------------------------------;
|
|
|
|
assumes ds,Data
|
|
assumes es,nothing
|
|
|
|
public ExtCom_FN10
|
|
ExtCom_FN10 proc near
|
|
|
|
call FindCOMPort
|
|
stc
|
|
ret
|
|
|
|
ExtCom_FN10 endp
|
|
page
|
|
|
|
|
|
ifdef DEBUG
|
|
public RecCom40, RecCom50, RecCom60, RecCom70, RecCom80
|
|
public RecCom90, RecCom95, RecCom100
|
|
public SendImm10, SendImm20,
|
|
public SendCom10, SendCom20, SendCom30, SendCom40, SendCom50, SendCom60
|
|
public Flush10, Flush20, Flush30, Flush40
|
|
public KickTx10
|
|
public Evt10
|
|
public EvtGet10
|
|
public StaCom20, StaCom25, StaCom30
|
|
public ClrBrk10, ClrBrk20, ClrBrk30
|
|
public ExtCom10, ExtCom20, ExtCom30, ExtCom40, ExtComDummy
|
|
public MSRRestart, MSRWait10, MSRWait20, MSRWait30, MSRWait40
|
|
public MSRWait50, MSRWait60, MSRWait70, MSRWait80, MSRWait90
|
|
endif
|
|
|
|
|
|
DOSTI proc near
|
|
FSTI
|
|
ret
|
|
DOSTI endp
|
|
|
|
DOCLI proc near
|
|
FCLI
|
|
ret
|
|
DOCLI endp
|
|
|
|
|
|
sEnd code
|
|
End
|