mirror of https://github.com/tongzx/nt5src
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
552 lines
24 KiB
552 lines
24 KiB
**********************************************************************
|
|
|
|
Running Setup for Microsoft Whistler Datacenter Server
|
|
Release Notes, Part 3 of 4
|
|
Beta 2
|
|
|
|
**********************************************************************
|
|
|
|
(c) 2001 Microsoft Corporation. All rights reserved.
|
|
|
|
|
|
These notes support a preliminary release of a software program that
|
|
bears the project code name Whistler.
|
|
|
|
This part of the text file series explains how to set up Whistler
|
|
Datacenter Server. For background information that will help you make
|
|
appropriate choices during Setup, see the earlier sections of the text
|
|
file series.
|
|
|
|
In this section of the text file series:
|
|
1.0 Preparing Your System for Installation
|
|
2.0 Starting Setup on an x86-based Computer
|
|
3.0 Starting Setup on an Itanium-based Computer
|
|
4.0 Planning for Unattended Setup
|
|
5.0 Entering Server Settings During Installation
|
|
6.0 Configuring Your Server
|
|
|
|
|
|
======================================================================
|
|
1.0 Preparing Your System for Installation
|
|
======================================================================
|
|
|
|
This topic describes the basic steps to take to prepare your server
|
|
for a new installation.
|
|
|
|
If you are installing Datacenter Server on server cluster nodes, be
|
|
sure to read Datactr4.txt, "Upgrading and Installing on Cluster
|
|
Nodes."
|
|
|
|
1.1 Checking the System Log for Errors
|
|
======================================================================
|
|
|
|
If the computer already has a working operating system, review the
|
|
system log for recent or recurring errors (especially hardware errors)
|
|
that could cause problems during the installation. For information
|
|
about viewing event logs, see Whistler Help and Support Services for
|
|
the operating system on your computer.
|
|
|
|
1.2 Backing Up Files
|
|
======================================================================
|
|
|
|
Before you install Whistler Datacenter Server, you should back up your
|
|
current files, unless the computer has no files or the current
|
|
operating system files have been damaged. You can back up files to a
|
|
variety of different media, such as tape drives or the hard disks of
|
|
other computers on the network.
|
|
|
|
1.3 Disconnecting UPS Devices
|
|
======================================================================
|
|
|
|
If you have an uninterruptible power supply (UPS) connected to your
|
|
target computer, disconnect the connecting serial cable before running
|
|
Setup. Whistler Setup attempts to automatically detect devices
|
|
connected to serial ports, and UPS equipment can cause problems with
|
|
the detection process.
|
|
|
|
|
|
======================================================================
|
|
2.0 Starting Setup on an x86-based Computer
|
|
======================================================================
|
|
|
|
This section explains how to start Setup on an x86-based computer.
|
|
For an explanation of how to start Setup on an Itanium-based computer,
|
|
see "Starting Setup on an Itanium-based Computer," later in this text
|
|
file series.
|
|
|
|
After you start Setup, it works in several stages, prompting you for
|
|
information, copying files, and restarting. Setup concludes with the
|
|
Configure Your Server Wizard, which you can use to adjust the server
|
|
configuration for your specific needs. Full online help (called Help
|
|
and Support Services) is available when the Configure Your Server
|
|
Wizard appears. To open Help and Support Services, click Start,
|
|
and then click Help and Support.
|
|
|
|
2.1 Providing a Mass Storage Driver or a HAL File
|
|
======================================================================
|
|
|
|
If you have a mass storage controller that requires a driver supplied
|
|
by the manufacturer, or if you have a custom Hardware Abstraction
|
|
Layer (HAL) file supplied by the manufacturer, you will need to
|
|
provide the appropriate driver file or HAL file during Setup.
|
|
|
|
2.1.1 Mass Storage Drivers and the Setup Process
|
|
----------------------------------------------------------------------
|
|
|
|
If you have a mass storage controller (such as a SCSI, RAID, or Fibre
|
|
Channel adapter) for your hard disk, see if the controller is on the
|
|
Hardware Compatibility List (HCL) that was released with the software,
|
|
that is, Hcl.txt in the Support folder on the Whistler Datacenter
|
|
Server CD. This file (as contrasted with the updated HCL at
|
|
http://www.microsoft.com) lists only the devices for which drivers are
|
|
included on the Whistler Datacenter Server CD. If your controller is
|
|
not listed in the HCL on the CD, but the manufacturer has supplied a
|
|
separate driver file for use with Whistler, locate the CD or other
|
|
medium containing the file before beginning Setup. During the early
|
|
part of Setup, a line at the bottom of the screen will prompt you to
|
|
press F6. Further prompts will guide you in supplying the driver file
|
|
to Setup so that it can gain access to the mass storage controller.
|
|
|
|
If you are not sure if your mass storage controller is supported, you
|
|
can try running Setup. If the controller is not supported, an error
|
|
message will indicate a problem with an inaccessible boot device.
|
|
|
|
2.1.2 Using a Custom Hardware Abstraction Layer (HAL) File
|
|
----------------------------------------------------------------------
|
|
|
|
If you have a custom Hardware Abstraction Layer (HAL) file supplied
|
|
by your computer manufacturer, before beginning Setup, locate the
|
|
CD or other medium containing the file. During the early part of
|
|
Setup, a line at the bottom of the screen will prompt you to press F6.
|
|
At this time, do not press F6. Press F5 instead. After you press F5,
|
|
follow the instructions that appear. In this way, you can include your
|
|
HAL file in the Setup process.
|
|
|
|
2.2 Starting Setup on an x86-based Computer
|
|
======================================================================
|
|
|
|
You can start Setup from a CD or from a network.
|
|
|
|
For information about unattended Setup and other options available
|
|
when starting Setup, see "Planning for Unattended Setup" later in this
|
|
text file series.
|
|
|
|
2.2.1 Starting from a CD
|
|
----------------------------------------------------------------------
|
|
|
|
If you use the Microsoft Whistler CD for running Setup, you have
|
|
several options for starting Setup.
|
|
|
|
>>> To start setup from the CD:
|
|
|
|
1. Insert the CD in the drive, and wait for Setup to start.
|
|
|
|
2. Follow the instructions that appear.
|
|
|
|
Another way of using the Setup CD is to start the computer from the
|
|
CD-ROM drive. Using this method, you can perform a new installation on
|
|
A computer that does not have an operating system, although you can
|
|
Also use this method on computers that have operating systems.
|
|
|
|
>>> To start Setup for a new installation by starting an x86-based
|
|
computer from the CD:
|
|
|
|
1. With the computer turned off, insert the CD in the CD-ROM drive.
|
|
|
|
2. Start the computer and wait for Setup to start.
|
|
|
|
3. Follow the instructions that appear.
|
|
|
|
2.2.2 Starting Setup from a Network
|
|
----------------------------------------------------------------------
|
|
|
|
To install Whistler from a network, you share the files either
|
|
directly from the CD or copy them to a shared folder. Then, you
|
|
start the appropriate program to run Setup.
|
|
|
|
>>> To install Whistler from a network (x86-based computers only):
|
|
|
|
1. On a network server, share the installation files, either by
|
|
inserting the CD and sharing the CD-ROM drive or by copying
|
|
the files from the I386 folder on the CD to a shared folder.
|
|
|
|
2. On the computer on which you want to install Whistler, connect to
|
|
the shared Setup files:
|
|
|
|
* If you are sharing the CD-ROM drive, connect to the shared drive
|
|
and change to the I386 folder.
|
|
|
|
* If you are sharing a folder, connect to that folder.
|
|
|
|
3. Run Winnt32.exe.
|
|
|
|
4. Follow the instructions that appear.
|
|
|
|
|
|
======================================================================
|
|
3.0 Starting Setup on an Itanium-based Computer
|
|
======================================================================
|
|
|
|
This section explains how to start Setup on an Itanium-based
|
|
computer. For an explanation of how to start Setup on an x86-based
|
|
computer, see "Starting Setup on an x86-based Computer" earlier in
|
|
this text file series.
|
|
|
|
Important: Itanium-based computers require a minimum 100-MB FAT
|
|
Partition for the operation of the Extensible Firmware Interface
|
|
(EFI). This EFI system partition stores programs and information files
|
|
that EFI uses to start the operating system. Do not delete or reformat
|
|
this partition. Whistler supports a new partition style called GUID
|
|
partition table (GPT), which is available only in the Itanium-based
|
|
editions of Whistler. The installation partition on an Itanium-based
|
|
computer must be GPT. You can still read and write to Master Boot
|
|
Record (MBR) volumes, which are common to most computers, but you
|
|
cannot install on one. Dynamic MBR disks can be accessed by x86-based
|
|
computers and Itanium-based computers running Windows 2000 or Whistler
|
|
only. Dynamic GPT disks can be accessed only by Itanium-based
|
|
computers running the Itanium editions of Whistler.
|
|
|
|
>>> To start Setup on an Itanium-based computer:
|
|
|
|
1. With the computer turned off, insert the Setup CD in the CD-ROM
|
|
drive.
|
|
|
|
2. Start the computer, and then press any key.
|
|
|
|
3. Follow the instructions that appear.
|
|
|
|
|
|
======================================================================
|
|
4.0 Planning for Unattended Setup
|
|
======================================================================
|
|
|
|
This section provides general information about unattended Setup. For
|
|
detailed instructions about running unattended Setup (also called
|
|
automated installation), see the "Microsoft Windows 2000 Resource Kit,
|
|
Deployment Planning Guide."
|
|
|
|
To simplify the process of setting up Whistler on multiple computers,
|
|
you can run Setup unattended. To do this, create and use an answer
|
|
file, a customized script that answers the Setup questions
|
|
automatically. Then, run Setup from the command line; that is, run
|
|
Winnt32.exe or Winnt.exe with the appropriate options for unattended
|
|
Setup. Choose the command according to the operating system that is
|
|
running when you start unattended Setup:
|
|
|
|
* To start unattended Setup on a computer running MS-DOS or
|
|
Windows 3.x, run Winnt.exe (with the appropriate options selected).
|
|
|
|
* To start unattended Setup on a computer running Windows NT,
|
|
Windows 95, Windows 98, Windows Millennium Edition, or Windows
|
|
2000, run Winnt32.exe (with the appropriate options selected).
|
|
|
|
To learn about unattended Setup, see the following sources:
|
|
|
|
* For detailed instructions on running unattended Setup (also called
|
|
automated installation), see the "Microsoft Windows 2000 Resource
|
|
Kit, Deployment Planning Guide."
|
|
|
|
* To view the command options available for Winnt.exe, on a computer
|
|
running Windows 3.x or MS-DOS, insert the Whistler Setup CD in
|
|
the CD-ROM drive and display the command prompt. Then, change to
|
|
the CD-ROM drive, change to the I386 directory, and type
|
|
|
|
winnt /?
|
|
|
|
* To view the command options available for Winnt32.exe, on a
|
|
computer running Windows 95, Windows 98, Windows Millennium
|
|
Edition, Windows NT, Windows 2000, or Whistler, insert the
|
|
Whistler Setup CD in the CD-ROM drive and display the command
|
|
prompt (click Start, click Run, and then type cmd). Then, change to
|
|
the CD drive, change to the I386 directory, and type
|
|
|
|
winnt32 /?
|
|
|
|
|
|
======================================================================
|
|
5.0 Entering Server Settings During Installation
|
|
======================================================================
|
|
|
|
After you start Setup, a process begins in which necessary Setup
|
|
files are copied to the disk. During this process, Setup displays
|
|
dialog boxes you can use to select various options.
|
|
|
|
The following sections outline the items you will be specifying as
|
|
you run Setup. Before working with these sections, see earlier
|
|
sections in this text file series for important background information
|
|
about issues such as partitions, file system choices, and the handling
|
|
of TCP/IP name resolution. You can modify settings after running Setup
|
|
by using the Configure Your Server Wizard or other configuration
|
|
tools.
|
|
|
|
Note: If you have a mass storage controller (such as a SCSI, RAID, or
|
|
Fibre Channel adapter) for your hard disk, see "Providing a Mass
|
|
Storage Driver or a HAL File" earlier in this text file. If you have
|
|
specialized hardware requiring a custom Hardware Abstraction Layer
|
|
(HAL) file supplied by your computer manufacturer, see "Using a Custom
|
|
Hardware Abstraction Layer (HAL) File" earlier in this text file.
|
|
|
|
5.1 Choosing or Creating a Partition for Whistler
|
|
======================================================================
|
|
|
|
During installation, you can create or specify a partition on which
|
|
you want to install Whistler. You can create a partition from the
|
|
unpartitioned space available, specify an existing partition, or
|
|
delete an existing partition to create more unpartitioned disk space
|
|
for the Whistler partition. If you specify any action that will cause
|
|
information to be erased, you will be prompted to confirm your choice.
|
|
|
|
For more information, see "Planning Disk Partitions" earlier in this
|
|
text file series.
|
|
|
|
Important: If you delete an existing partition, you will cause any
|
|
data on that partition to be erased. Installing Whistler on a
|
|
partition that contains another operating system will cause that
|
|
operating system to be overwritten.
|
|
|
|
5.2 Selecting Regional Settings
|
|
======================================================================
|
|
|
|
Use this screen to customize language and locale settings. You can
|
|
set up Whistler to use multiple languages and regional settings.
|
|
|
|
5.3 Personalizing Whistler Datacenter Server
|
|
======================================================================
|
|
|
|
Enter your name and, optionally, your organization.
|
|
|
|
5.4 Specifying a Licensing Mode
|
|
======================================================================
|
|
|
|
Select your client licensing mode. For information about licensing
|
|
modes, see "Choosing a Licensing Mode" in Datactr1.txt. If you are
|
|
unsure which mode to use, choose Per Server because you can change
|
|
once from Per Server to Per Seat at no cost.
|
|
|
|
5.5 Entering Your Computer Name
|
|
======================================================================
|
|
|
|
Enter a computer name. The recommended length for most languages is
|
|
15 characters or less. For languages that require more storage space
|
|
per character, such as Chinese, Japanese, and Korean, the recommended
|
|
length is 7 characters or fewer.
|
|
|
|
You should use only Internet-standard characters in the computer name.
|
|
The standard characters are the numbers 0 to 9, uppercase and
|
|
lowercase letters from A to Z, and the hyphen (-) character.
|
|
|
|
If you are using the Microsoft DNS Service on your network, you
|
|
can use a wider variety of characters, including Unicode characters
|
|
and other nonstandard characters such as the ampersand (&). Using
|
|
nonstandard characters might impact the interoperability of
|
|
network software from other companies. For more information about
|
|
DNS, see "Name Resolution for TCP/IP" earlier in this text file
|
|
series.
|
|
|
|
The maximum length for a computer name is 63 bytes. If the name is
|
|
longer than 15 bytes (15 characters in most languages, 7 characters in
|
|
some), computers running operating systems developed before Windows
|
|
2000 will recognize this computer by the first 15 bytes of the name
|
|
only.
|
|
|
|
If this computer will be part of a domain, you must choose a computer
|
|
name different from any other computer in the domain. If this computer
|
|
will contain multiple Whistler Datacenter Server installations, each
|
|
installation must be on a separate partition and must have a unique
|
|
computer name.
|
|
|
|
5.5.1 Setting the Administrator Account Password
|
|
----------------------------------------------------------------------
|
|
|
|
Setup creates a user account on your computer called Administrator
|
|
that has administrative privileges for managing your computer's
|
|
overall configuration. The Administrator account is intended for the
|
|
person who manages this computer. For security reasons, you should
|
|
specify a password for the Administrator account. Leaving the
|
|
Administrator password box empty indicates no password for the
|
|
account.
|
|
|
|
The password can have up to 127 characters. For the strongest system
|
|
security, use a password of at least 7 characters and use a mixture
|
|
of uppercase and lowercase letters, numbers, and other characters such
|
|
as *, ?, or $.
|
|
|
|
Important: For security reasons, you should assign a strong password
|
|
to the Administrator account.
|
|
|
|
The password you type in the Confirm password box must exactly match
|
|
The password you type in Administrator password box. Take special care
|
|
To remember and protect your password. After Setup is completed, for
|
|
the highest security, change the name of the Administrator account (it
|
|
cannot be deleted) and keep a strong password on the account at all
|
|
times. For more information about security and the privileges held by
|
|
the Administrator account and the Administrators group, see Whistler
|
|
Help and Support Services. To open Help and Support Services, after
|
|
completing Setup, click Start, and then click Help and Support.
|
|
|
|
5.5.2 Choosing Server Components
|
|
----------------------------------------------------------------------
|
|
|
|
You can choose among certain components that will make up your server
|
|
installation. For information about determining which components you
|
|
need, see "Choosing Components to Install" earlier in this text file
|
|
series. Components often needed on networks using TCP/IP include DHCP,
|
|
DNS, and WINS. To install these components, during Setup, in the
|
|
Windows Components dialog box, select Networking Services, click
|
|
Details, and then select the component or components you need.
|
|
|
|
If you complete Setup and then decide you need other components, you
|
|
can add the necessary components later. There are two ways to do this:
|
|
|
|
* Use the Configure Your Server Wizard. This wizard appears
|
|
automatically when Setup is complete. You can also start this
|
|
wizard at any time by using the following steps: click Start,
|
|
point to Programs, point to Administrative Tools, and then click
|
|
Configure Your Server.
|
|
|
|
With this wizard, you can install appropriate sets of components
|
|
for domain controllers or member servers, including file
|
|
servers, print servers, Web and streaming media servers,
|
|
application servers, Microsoft SharePoint servers, and networking
|
|
and communications servers.
|
|
|
|
* Use the Windows Components Wizard. To use this wizard, after
|
|
running Setup, click Start, point to Settings, and then click
|
|
Control Panel. In Control Panel, double-click Add or Remove
|
|
Programs, and then click Add/Remove Windows Components (on the
|
|
left).
|
|
|
|
With this wizard, you can choose and install individual
|
|
components.
|
|
|
|
5.5.3 Setting the Date and Time
|
|
----------------------------------------------------------------------
|
|
|
|
Set the date, time, and time zone, and choose whether the system
|
|
should automatically adjust for daylight saving time.
|
|
|
|
5.5.4 Specifying Networking Settings
|
|
----------------------------------------------------------------------
|
|
|
|
You can specify networking information (for TCP/IP or other
|
|
protocols) during Setup, or you can use the Typical settings option
|
|
and then make any necessary changes to your networking configuration
|
|
after installation by using the Configure Your Server Wizard or other
|
|
management tools. (For information about using protocols other than
|
|
TCP/IP, read the documentation for your network adapter.)
|
|
|
|
In Setup, you have three choices regarding IP addresses. For important
|
|
background information about these choices, see "IP Addresses"
|
|
earlier in this text file series. To assign IP addresses, you can:
|
|
|
|
* Use the Whistler Datacenter Server feature called Automatic
|
|
Private IP Addressing (APIPA) to automatically assign IP
|
|
addresses. You can allow Whistler to provide IP addresses
|
|
automatically during Setup and then, after Setup, change your
|
|
configuration to use DHCP, static addressing, or both. To open
|
|
Whistler Help and Support Services (which includes information
|
|
about DHCP and static IP addresses), after completing Setup, click
|
|
Start, and then click Help and Support.
|
|
|
|
* Provide for IP addresses to be dynamically assigned in your
|
|
domain by installing and configuring DHCP on a server to which
|
|
you assign a static IP address. If you are not familiar with
|
|
DHCP or the possible choices for a static IP address and its
|
|
associated subnet mask, you should use APIPA, at least initially,
|
|
as described in the previous paragraph.
|
|
|
|
* Assign a static IP address to one or more servers. You must assign
|
|
a server a static IP address if it will provide access to users
|
|
on the Internet. For important information about obtaining an IP
|
|
address, see "IP Addresses" earlier in this text file series.
|
|
|
|
In addition, during Setup, you can provide the local server with the
|
|
IP addresses of any DNS or WINS servers on your network.
|
|
|
|
>>> To allow Setup to assign or obtain an IP address:
|
|
|
|
* In Setup, in the Networking Settings dialog box, click Typical
|
|
settings.
|
|
|
|
Whistler Setup checks to see if there is a DHCP server in your
|
|
domain. If there is a DHCP server in your domain, the server
|
|
provides the IP address. If there is no DHCP server in your
|
|
domain, Automatic Private IP Addressing (APIPA) assigns an IP
|
|
address.
|
|
|
|
>>> To specify a static local IP address and settings needed for DNS
|
|
and WINS:
|
|
|
|
1. In Setup, in the Networking Settings dialog box, click Custom
|
|
settings.
|
|
|
|
2. In the Networking Components dialog box, click Internet Protocol
|
|
(TCP/IP).
|
|
|
|
3. Click Properties.
|
|
|
|
4. In the Internet Protocol (TCP/IP) Properties dialog box, click Use
|
|
the following IP address.
|
|
|
|
5. In IP address and Subnet mask, type the appropriate numbers (if
|
|
appropriate, specify the Default gateway as well).
|
|
|
|
6. Under Use the following DNS server addresses, type the address of
|
|
a preferred DNS server and, optionally, an alternate DNS server.
|
|
|
|
If the local server is the preferred or alternate DNS server, type
|
|
the same IP address as assigned in the previous step.
|
|
|
|
7. If you will use a WINS server, click Advanced, and then click the
|
|
WINS tab of the Advanced TCP/IP Settings dialog box to add the
|
|
IP address of one or more WINS servers.
|
|
|
|
If the local server is a WINS server, type the IP address assigned
|
|
in step 5.
|
|
|
|
8. Click OK in each dialog box, and continue through Setup.
|
|
|
|
5.5.5 Specifying the Workgroup or Domain Name
|
|
----------------------------------------------------------------------
|
|
|
|
A domain is a grouping of accounts and network resources under a
|
|
single domain name and security boundary. A workgroup is a more basic
|
|
grouping, intended only to help users find such things as printers and
|
|
shared folders within that group. You will need to choose between
|
|
workgroup and domain, and then specify a name for your workgroup or
|
|
domain. For more information, see "Deciding Between Workgroups and
|
|
Domains" earlier in this text file series.
|
|
|
|
|
|
======================================================================
|
|
6.0 Configuring Your Server
|
|
======================================================================
|
|
|
|
When Setup completes the installation of Whistler, the computer
|
|
restarts. Setup has now performed the basic installation. The
|
|
Configure Your Server Wizard, which will appear on the screen if you
|
|
log on as the Administrator, makes further configuration easy. At this
|
|
point, you can register your copy of Whistler Datacenter Server and
|
|
use Configure Your Server.
|
|
|
|
Also at this point, you can open Whistler Help and Support Services
|
|
by clicking Start, and then clicking Help and Support. If you have
|
|
used Windows NT in the past, one of the features you might find useful
|
|
in Whistler Help and Support is New ways to do familiar tasks,
|
|
available in the Help topics or by using Search in Help and Support
|
|
Services.
|
|
|
|
You can use the Configure Your Server Wizard to finish installing
|
|
optional components that you choose during Setup. With this
|
|
wizard, you can configure domain controllers or member servers,
|
|
including file servers, print servers, Web and streaming media
|
|
servers, application servers, Microsoft SharePoint servers, and
|
|
networking and communications servers.
|
|
|
|
You can start the Configure Your Server Wizard at any time by
|
|
clicking Start, pointing to Programs, pointing to Administrative
|
|
Tools, and then clicking Configure Your Server. Other configuration
|
|
tools are also available from Administrative Tools.
|
|
|
|
(continued in Datactr4.txt)
|
|
|