Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1302 lines
36 KiB

IPX DEFINITIONS ::= BEGIN
-- This MIB defines the management information for a system using the IPX
-- protocol. The MIB consists of four groups:
--
-- 1. System Group - contains general information about all instances
-- of IPX on the system
--
-- 2. Circuit Group - contains information about all circuits used by
-- IPX on the system
--
-- 3. Forwarding Group - contains generic routing information that
-- must be provided by any IPX routing protocol.
--
-- 4. Services Group - contains information about all known services.
--
-- The MIB is designed to support multiple instances of the IPX
-- protocol on one system via a system instance identifier which is the
-- primary index for every table in this MIB.
--
-- This MIB is designed to provide a basic framework for the management
-- of systems implementing the IPX protocol. Additional MIBs may be
-- created (especially in the area of IPX routing protocols) to contain
-- more specific information. Whenever possible, these additional MIBs
-- should follow the format of this IPX MIB. Information in these MIBs
-- should be linked to this MIB via the use of the system instance
-- identifier mentioned above.
--
--
-- Changes:
--
-- 4/15/94: Cleanup of some typographical errors
--
-- 4/21/94: Change ipxCircNetNumber acces to read-write
--
-- Limitations in NT Router implementation
-- ipxBasicSysEntry:
-- ipxBasicSysInstance - always 0 (only one instance of IPX can run)
-- ipxBasicSysExistSate - always ON (deletions or additions of system
-- instances are no supported)
-- ipxBasicSysInReceives - always 0 (system-wide statistics are not kept)
-- ipxBasicSysInHdrErrors - always 0 (system-wide statistics are not kept)
-- ipxBasicSysUnknownSockets - always 0 (system-wide statistics are not kept)
-- ipxBasicSysInDiscards - always 0 (system-wide statistics are not kept)
-- ipxBasicSysInBadChecksums - always 0 (system-wide statistics are not kept)
-- ipxBasicSysInDelivers - always 0 (system-wide statistics are not kept)
-- ipxBasicSysNoRoutes - always 0 (system-wide statistics are not kept)
-- ipxBasicSysOutRequests - always 0 (system-wide statistics are not kept)
-- ipxBasicSysOutMalformedRequests - always 0 (not supported)
-- ipxBasicSysOpenSocketFails - always 0 (not supported)
-- ipxAdvSysEntry:
-- ipxAdvSysInstance - always 0 (only one instance of IPX can run)
-- ipxAdvSysMaxPathSplits - supported as read-only
-- ipxAdvSysMaxHops - supported as read-only
-- ipxAdvSysInTooManyHops - always 0 (not supported)
-- ipxAdvSysInFiltered - always 0 (system-wide statistics are not kept)
-- ipxAdvSysInCompressDiscards - always 0 (not supported)
-- ipxAdvSysNETBIOSPackets - always 0 (system-wide statistics are not kept)
-- ipxAdvSysForwPackets - always 0 (system-wide statistics are not kept)
-- ipxAdvSysOutFiltered - always 0 (system-wide statistics are not kept)
-- ipxAdvSysOutComplressDiscards - always 0 (not supported)
-- ipxAdvSysCircCount - count of interfaces with IPX routing installed
-- ipxCircEntry:
-- ipxCircSysInstance - always 0 (only one instance of IPX can run)
-- ipxCircExistState - always ON (deletions or additions of circuits
-- are no supported)
-- ipxCircIfIndex - this index does not neccessarily correspond
-- to interface indeces in interface table
-- (mib-2.2)
-- ipxCircName - supported as read-only
-- ipxCircType - supported as read-only
-- ipxCircLocalMaxPacketSize - supported as read-only
-- ipxCircStaticStatus - supported as read-only
-- ipxCircStateChanges - always 0 (not supported)
-- ipxCircInitFails - always 0 (not supported)
-- ipxCircNeighInternalNetNum - always 0 (not supported)
-- ipxDestEntry:
-- ipxDestSysInstance - always 0 (only one instance of IPX can run)
-- ipxDestNextHopNetNum - always zero (not supported)
-- ipxStaticRouteEntry:
-- ipxStaticRouteSysInstance - always 0 (only one instance of IPX can run)
-- ipxServEntry:
-- ipxServSysInstance - always 0 (only one instance of IPX can run)
-- ipxDestServEntry: - not supported, always empty
-- ipxStaticServEntry:
-- ipxStaticServSysInstance - always 0 (only one instance of IPX can run)
--
IMPORTS
enterprises, Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212;
-- TRAP-TYPE
-- FROM RFC-1215
-- PhysAddress
-- FROM RFC1213-MIB;
novell OBJECT IDENTIFIER ::= { enterprises 23 }
mibDoc OBJECT IDENTIFIER ::= { novell 2 }
ipx OBJECT IDENTIFIER ::= { mibDoc 5 }
-- Groups
ipxSystem OBJECT IDENTIFIER ::= {ipx 1}
ipxCircuit OBJECT IDENTIFIER ::= {ipx 2}
ipxForwarding OBJECT IDENTIFIER ::= {ipx 3}
ipxServices OBJECT IDENTIFIER ::= {ipx 4}
ipxTraps OBJECT IDENTIFIER ::= {ipx 5}
-- Types
NetNumber ::= OCTET STRING (SIZE(4))
PhysAddress ::= OCTET STRING (SIZE(6))
-- System Group
-- This group contains global information about each instance of IPX
-- running on one system.
-- Basic System Table
-- This table contains one entry for each instance of IPX running on
-- the system. It contains the management information that should
-- be made available by all implementations of the IPX protocol.
ipxBasicSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXBasicSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The IPX System table - basic information."
::= {ipxSystem 1}
ipxBasicSysEntry OBJECT-TYPE
SYNTAX IPXBasicSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one instance of IPX running
on the system."
INDEX {ipxBasicSysInstance}
::= {ipxBasicSysTable 1}
IPXBasicSysEntry ::= SEQUENCE {
ipxBasicSysInstance INTEGER,
ipxBasicSysExistState INTEGER,
ipxBasicSysNetNumber NetNumber,
ipxBasicSysNode OCTET STRING,
ipxBasicSysName OCTET STRING,
ipxBasicSysInReceives Counter,
ipxBasicSysInHdrErrors Counter,
ipxBasicSysInUnknownSockets Counter,
ipxBasicSysInDiscards Counter,
ipxBasicSysInBadChecksums Counter,
ipxBasicSysInDelivers Counter,
ipxBasicSysNoRoutes Counter,
ipxBasicSysOutRequests Counter,
ipxBasicSysOutMalformedRequests Counter,
ipxBasicSysOutDiscards Counter,
ipxBasicSysOutPackets Counter,
ipxBasicSysConfigSockets INTEGER,
ipxBasicSysOpenSocketFails Counter
}
ipxBasicSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX to which this
row corresponds. This value may be written only when
creating a new entry in the table."
::= {ipxBasicSysEntry 1}
ipxBasicSysExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this entry in the IPX system table.
Setting this field to off indicates that this entry may be
deleted from the system table at the IPX implementation's
discretion."
::= {ipxBasicSysEntry 2}
ipxBasicSysNetNumber OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The network number portion of the IPX address of this
system."
::= {ipxBasicSysEntry 3}
ipxBasicSysNode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The node number portion of the IPX address of this
system."
::= {ipxBasicSysEntry 4}
ipxBasicSysName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The readable name for this system."
::= {ipxBasicSysEntry 5}
ipxBasicSysInReceives OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The total number of IPX packets received, including
those received in error."
::= {ipxBasicSysEntry 6}
ipxBasicSysInHdrErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets discarded due to errors in
their headers, including any IPX packet with a size less
than the minimum of 30 bytes."
::= {ipxBasicSysEntry 7}
ipxBasicSysInUnknownSockets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets discarded because the
destination socket was not open."
::= {ipxBasicSysEntry 8}
ipxBasicSysInDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets received but discarded due to
reasons other than those accounted for by
ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets,
ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards."
::= {ipxBasicSysEntry 9}
ipxBasicSysInBadChecksums OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets received with incorrect
checksums."
::= {ipxBasicSysEntry 10}
ipxBasicSysInDelivers OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The total number of IPX packets delivered locally,
including packets from local applications."
::= {ipxBasicSysEntry 11}
ipxBasicSysNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of times no route to a destination was
found."
::= {ipxBasicSysEntry 12}
ipxBasicSysOutRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets supplied locally for
transmission, not including any packets counted in
ipxAdvForwPackets."
::= {ipxBasicSysEntry 13}
ipxBasicSysOutMalformedRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets supplied locally that contained
errors in their structure."
::= {ipxBasicSysEntry 14}
ipxBasicSysOutDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of outgoing IPX packets discarded due to
reasons other than those accounted for in
ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered,
and ipxAdvSysOutCompressDiscards."
::= {ipxBasicSysEntry 15}
ipxBasicSysOutPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The total number of IPX packets transmitted."
::= {ipxBasicSysEntry 16}
ipxBasicSysConfigSockets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The configured maximum number of IPX sockets that may be
open at one time."
::= {ipxBasicSysEntry 17}
ipxBasicSysOpenSocketFails OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX socket open calls which failed."
::= {ipxBasicSysEntry 18}
-- Advanced System Table
-- This table contains one entry for each instance of IPX running on
-- the system. It contains the advanced management information that
-- may not be available from all implementations of the IPX protocol.
ipxAdvSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXAdvSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The IPX System table - advanced information."
::= {ipxSystem 2}
ipxAdvSysEntry OBJECT-TYPE
SYNTAX IPXAdvSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one instance of IPX running
on the system."
INDEX {ipxAdvSysInstance}
::= {ipxAdvSysTable 1}
IPXAdvSysEntry ::= SEQUENCE {
ipxAdvSysInstance INTEGER,
ipxAdvSysMaxPathSplits INTEGER,
ipxAdvSysMaxHops INTEGER,
ipxAdvSysInTooManyHops Counter,
ipxAdvSysInFiltered Counter,
ipxAdvSysInCompressDiscards Counter,
ipxAdvSysNETBIOSPackets Counter,
ipxAdvSysForwPackets Counter,
ipxAdvSysOutFiltered Counter,
ipxAdvSysOutCompressDiscards Counter,
ipxAdvSysCircCount INTEGER,
ipxAdvSysDestCount INTEGER,
ipxAdvSysServCount INTEGER
}
ipxAdvSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX to which this
row corresponds. This value may be written only when
creating a new entry in the table."
::= {ipxAdvSysEntry 1}
ipxAdvSysMaxPathSplits OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The maximum number of paths with equal routing metric
value which this instance of the IPX may split
between when forwarding packets."
DEFVAL { 1 }
::= {ipxAdvSysEntry 2}
ipxAdvSysMaxHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The maximum number of hops a packet may take."
DEFVAL { 64 }
::= {ipxAdvSysEntry 3}
ipxAdvSysInTooManyHops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets discarded due to exceeding the
maximum hop count."
::= {ipxAdvSysEntry 4}
ipxAdvSysInFiltered OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of incoming IPX packets discarded due to
filtering."
::= {ipxAdvSysEntry 5}
ipxAdvSysInCompressDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of incoming IPX packets discarded due to
decompression errors."
::= {ipxAdvSysEntry 6}
ipxAdvSysNETBIOSPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of NETBIOS packets received."
::= {ipxAdvSysEntry 7}
ipxAdvSysForwPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of IPX packets forwarded."
::= {ipxAdvSysEntry 8}
ipxAdvSysOutFiltered OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of outgoing IPX packets discarded due to
filtering."
::= {ipxAdvSysEntry 9}
ipxAdvSysOutCompressDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of outgoing IPX packets discarded due to
compression errors."
::= {ipxAdvSysEntry 10}
ipxAdvSysCircCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of circuits known to this instance of IPX."
::= {ipxAdvSysEntry 11}
ipxAdvSysDestCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of currently reachable destinations known to
this instance of IPX."
::= {ipxAdvSysEntry 12}
ipxAdvSysServCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of services known to this instance of IPX."
::= {ipxAdvSysEntry 13}
-- Circuit Group
-- This group contains management information for each circuit known
-- to this system.
-- Circuit Table
-- The Circuit table contains an entry for each circuit known to the
-- system.
ipxCircTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The Circuit table."
::= {ipxCircuit 1}
ipxCircEntry OBJECT-TYPE
SYNTAX IPXCircEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one circuit known to the
system."
INDEX {
ipxCircSysInstance,
ipxCircIndex
}
::= {ipxCircTable 1}
IPXCircEntry ::= SEQUENCE {
ipxCircSysInstance INTEGER,
ipxCircIndex INTEGER,
ipxCircExistState INTEGER,
ipxCircOperState INTEGER,
ipxCircIfIndex INTEGER,
ipxCircName OCTET STRING,
ipxCircType INTEGER,
ipxCircDialName OCTET STRING,
ipxCircLocalMaxPacketSize INTEGER,
ipxCircCompressState INTEGER,
ipxCircCompressSlots INTEGER,
ipxCircStaticStatus INTEGER,
ipxCircCompressedSent Counter,
ipxCircCompressedInitSent Counter,
ipxCircCompressedRejectsSent Counter,
ipxCircUncompressedSent Counter,
ipxCircCompressedReceived Counter,
ipxCircCompressedInitReceived Counter,
ipxCircCompressedRejectsReceived Counter,
ipxCircUncompressedReceived Counter,
ipxCircMediaType OCTET STRING,
ipxCircNetNumber NetNumber,
ipxCircStateChanges Counter,
ipxCircInitFails Counter,
ipxCircDelay INTEGER,
ipxCircThroughput INTEGER,
ipxCircNeighRouterName OCTET STRING,
ipxCircNeighInternalNetNum NetNumber
}
ipxCircSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this entry corresponds. This value may be
written only when creating a new entry in the table."
::= {ipxCircEntry 1}
ipxCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The identifier of this circuit, unique within the
instance of IPX. This value may be written
only when creating a new entry in the table."
::= {ipxCircEntry 2}
ipxCircExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this circuit entry. A circuit with this
value set to off may be deleted from the table at the
IPX implementation's discretion."
::= {ipxCircEntry 3}
ipxCircOperState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
up(2),
sleeping(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The operational state of the circuit."
::= {ipxCircEntry 4}
ipxCircIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The value of ifIndex for the interface used by this
circuit. This value may be written only when creating
a new entry in the table."
::= {ipxCircEntry 5}
ipxCircName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The readable name for the circuit."
::= {ipxCircEntry 6}
ipxCircType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
broadcast(2),
ptToPt(3),
wanRIP(4),
unnumberedRIP(5),
dynamic(6),
wanWS(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The type of the circuit."
::= {ipxCircEntry 7}
ipxCircDialName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The symbolic name used to refernce the dialing information
used to create this circuit. This value may be written
only when creating a new entry in the table."
::= {ipxCircEntry 8}
ipxCircLocalMaxPacketSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The maximum size (including header), in bytes, that the
system supports locally on this circuit."
::= {ipxCircEntry 9}
ipxCircCompressState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The compression state on this circuit. This value may
be written only when creating a new entry in the table."
DEFVAL { off }
::= {ipxCircEntry 10}
ipxCircCompressSlots OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The number of compression slots available on this
circuit. This value may be written only when creating a
new entry in the table."
DEFVAL { 16 }
::= {ipxCircEntry 11}
ipxCircStaticStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
current(2),
changed(3),
read(4),
reading(5),
write(6),
writing(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Indicates whether the information about static routes
and services reached via this circuit matches that
saved in permanent storage (current). Setting the
value to write when it had the value changed will write
the currently in use information to permanent storage,
if supported. Setting the value to read when it had
the value changed will replace any routes and services
currently defined for the circuit with those read from
permanent storage, if supported."
::= {ipxCircEntry 12}
ipxCircCompressedSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of compressed packets sent."
::= {ipxCircEntry 13}
ipxCircCompressedInitSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of compression initialization packets sent."
::= {ipxCircEntry 14}
ipxCircCompressedRejectsSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of compressed packet rejected packets sent."
::= {ipxCircEntry 15}
ipxCircUncompressedSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of packets sent without being compressed
even though compression was turned on for this circuit."
::= {ipxCircEntry 16}
ipxCircCompressedReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of compressed packets received."
::= {ipxCircEntry 17}
ipxCircCompressedInitReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of compression initialization packets received."
::= {ipxCircEntry 18}
ipxCircCompressedRejectsReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of compressed packet rejected packets received."
::= {ipxCircEntry 19}
ipxCircUncompressedReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of packets received without having been
compressed even though compression was turned on for
this circuit."
::= {ipxCircEntry 20}
ipxCircMediaType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The media type used on this circuit."
::= {ipxCircEntry 21}
ipxCircNetNumber OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IPX network number of this circuit. This value may
be written only when creating a new entry in the table."
::= {ipxCircEntry 22}
ipxCircStateChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of times the circuit has changed state."
::= {ipxCircEntry 23}
ipxCircInitFails OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of times that initialization of this
circuit has failed."
::= {ipxCircEntry 24}
ipxCircDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The period of time, in milliseconds, that it takes to
transmit one byte of data, excluding protocol headers,
to a destination on the other end of the circuit, if
the circuit is free of other traffic."
::= {ipxCircEntry 25}
ipxCircThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The amount of data, in bits per second, that may flow
through the circuit if there is no other traffic."
::= {ipxCircEntry 26}
ipxCircNeighRouterName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..48))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The name of the neighboring router on a WAN circuit."
::= {ipxCircEntry 27}
ipxCircNeighInternalNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "The internal network number of the neighboring router
on a WAN circuit."
::= {ipxCircEntry 28}
-- Forwarding Group
-- This group provides a representation of the forwarding database used
-- by all instances of IPX on the system.
-- Destination Table
-- The Destination table contains information about all known
-- destinations. The routing information shown in this table represents
-- the path currently being used to reach the destination.
ipxDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The Destination table contains information about all
known destinations."
::= {ipxForwarding 1}
ipxDestEntry OBJECT-TYPE
SYNTAX IPXDestEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one destination."
INDEX {
ipxDestSysInstance,
ipxDestNetNum
}
::= {ipxDestTable 1}
IPXDestEntry ::= SEQUENCE {
ipxDestSysInstance INTEGER,
ipxDestNetNum NetNumber,
ipxDestProtocol INTEGER,
ipxDestTicks INTEGER,
ipxDestHopCount INTEGER,
ipxDestNextHopCircIndex INTEGER,
ipxDestNextHopNICAddress PhysAddress,
ipxDestNextHopNetNum NetNumber
}
ipxDestSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this row corresponds."
::= {ipxDestEntry 1}
ipxDestNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "The IPX network number of the destination."
::= {ipxDestEntry 2}
ipxDestProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
rip(3),
nlsp(4),
static(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The routing protocol from which knowledge of this
destination was obtained."
::= {ipxDestEntry 3}
ipxDestTicks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The delay in ticks to reach this destination."
::= {ipxDestEntry 4}
ipxDestHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of hops necessary to reach the destination."
::= {ipxDestEntry 5}
ipxDestNextHopCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The unique identifier of the circuit used to reach the
next hop."
::= {ipxDestEntry 6}
ipxDestNextHopNICAddress OBJECT-TYPE
SYNTAX PhysAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION "The NIC address of the next hop."
::= {ipxDestEntry 7}
ipxDestNextHopNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "The IPX network number of the next hop."
::= {ipxDestEntry 8}
-- Static Routes Table
-- This table contains the information about all the static routes
-- defined. There may be more than one static route to any given
-- destination. Only the route currently being used will also be
-- present in the Destination Table defined above.
ipxStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The Static Routes table contains information about all
destinations reached via statically configured routes."
::= {ipxForwarding 2}
ipxStaticRouteEntry OBJECT-TYPE
SYNTAX IPXStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one static route."
INDEX {
ipxStaticRouteSysInstance,
ipxStaticRouteCircIndex,
ipxStaticRouteNetNum
}
::= {ipxStaticRouteTable 1}
IPXStaticRouteEntry ::= SEQUENCE {
ipxStaticRouteSysInstance INTEGER,
ipxStaticRouteCircIndex INTEGER,
ipxStaticRouteNetNum NetNumber,
ipxStaticRouteExistState INTEGER,
ipxStaticRouteTicks INTEGER,
ipxStaticRouteHopCount INTEGER
}
ipxStaticRouteSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX to
which this row corresponds."
::= {ipxStaticRouteEntry 1}
ipxStaticRouteCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the circuit used to
reach the first hop in the static route."
::= {ipxStaticRouteEntry 2}
ipxStaticRouteNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IPX network number of the route's destination."
::= {ipxStaticRouteEntry 3}
ipxStaticRouteExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this static route. Entries with the
value set to off may be deleted from the table at the
implementation's discretion."
::= {ipxStaticRouteEntry 4}
ipxStaticRouteTicks OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The delay, in ticks, to reach the route's destination."
::= {ipxStaticRouteEntry 5}
ipxStaticRouteHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The number of hops necessary to reach the destination."
::= {ipxStaticRouteEntry 6}
-- Services Group
-- The Services group contains management information for all known
-- services.
-- Services Table
-- This table contains the services information indexed by service
-- name and type.
ipxServTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The table of services, indexed by name and type."
::= {ipxServices 1}
ipxServEntry OBJECT-TYPE
SYNTAX IPXServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one service."
INDEX {
ipxServSysInstance,
ipxServType,
ipxServName
}
::= {ipxServTable 1}
IPXServEntry ::= SEQUENCE {
ipxServSysInstance INTEGER,
ipxServType OCTET STRING,
ipxServName OCTET STRING,
ipxServProtocol INTEGER,
ipxServNetNum NetNumber,
ipxServNode OCTET STRING,
ipxServSocket OCTET STRING,
ipxServHopCount INTEGER
}
ipxServSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this entry corresponds."
::= {ipxServEntry 1}
ipxServType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The service type."
::= {ipxServEntry 2}
ipxServName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..48))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The service name."
::= {ipxServEntry 3}
ipxServProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
nlsp(4),
static(5),
sap(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The protocol from which knowledge of this service was
obtained."
::= {ipxServEntry 4}
ipxServNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "The IPX network number portion of the IPX address of the
service."
::= {ipxServEntry 5}
ipxServNode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The node portion of the IPX address of the service."
::= {ipxServEntry 6}
ipxServSocket OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The socket portion of the IPX address of the service."
::= {ipxServEntry 7}
ipxServHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of hops to the service."
::= {ipxServEntry 8}
-- Destination Services Table
-- This table contains the services information indexed by address,
-- name, and type.
ipxDestServTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXDestServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The table of services, indexed by address, name,
and type."
::= {ipxServices 2}
ipxDestServEntry OBJECT-TYPE
SYNTAX IPXDestServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one service."
INDEX {
ipxDestServSysInstance,
ipxDestServNetNum,
ipxDestServNode,
ipxDestServSocket,
ipxDestServName,
ipxDestServType
}
::= {ipxDestServTable 1}
IPXDestServEntry ::= SEQUENCE {
ipxDestServSysInstance INTEGER,
ipxDestServNetNum NetNumber,
ipxDestServNode OCTET STRING,
ipxDestServSocket OCTET STRING,
ipxDestServName OCTET STRING,
ipxDestServType OCTET STRING,
ipxDestServProtocol INTEGER,
ipxDestServHopCount INTEGER
}
ipxDestServSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX
to which this entry corresponds."
::= {ipxDestServEntry 1}
ipxDestServNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-only
STATUS mandatory
DESCRIPTION "The IPX network number portion of the IPX address of the
service."
::= {ipxDestServEntry 2}
ipxDestServNode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The node portion of the IPX address of the service."
::= {ipxDestServEntry 3}
ipxDestServSocket OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The socket portion of the IPX address of the service."
::= {ipxDestServEntry 4}
ipxDestServName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..48))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The service name."
::= {ipxDestServEntry 5}
ipxDestServType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-only
STATUS mandatory
DESCRIPTION "The service type."
::= {ipxDestServEntry 6}
ipxDestServProtocol OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
nlsp(4),
static(5),
sap(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "The protocol from which knowledge of this service was
obtained."
::= {ipxDestServEntry 7}
ipxDestServHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "The number of hops to the service."
::= {ipxDestServEntry 8}
-- Static Services Table
-- This table contains information for all services reached via a
-- static route.
ipxStaticServTable OBJECT-TYPE
SYNTAX SEQUENCE OF IPXStaticServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "The Static Services table contains information about
all services reached via statically configured routes."
::= {ipxServices 3}
ipxStaticServEntry OBJECT-TYPE
SYNTAX IPXStaticServEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Each entry corresponds to one service."
INDEX {
ipxStaticServSysInstance,
ipxStaticServCircIndex,
ipxStaticServName,
ipxStaticServType
}
::= {ipxStaticServTable 1}
IPXStaticServEntry ::= SEQUENCE {
ipxStaticServSysInstance INTEGER,
ipxStaticServCircIndex INTEGER,
ipxStaticServName OCTET STRING,
ipxStaticServType OCTET STRING,
ipxStaticServExistState INTEGER,
ipxStaticServNetNum NetNumber,
ipxStaticServNode OCTET STRING,
ipxStaticServSocket OCTET STRING,
ipxStaticServHopCount INTEGER
}
ipxStaticServSysInstance OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The unique identifier of the instance of IPX to which
this entry corresponds."
::= {ipxStaticServEntry 1}
ipxStaticServCircIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The circuit used to reach this service."
::= {ipxStaticServEntry 2}
ipxStaticServName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..48))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The service name."
::= {ipxStaticServEntry 3}
ipxStaticServType OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The service type."
::= {ipxStaticServEntry 4}
ipxStaticServExistState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "The validity of this static service. Entries with the
value set to off may be deleted from the table at the
implementation's discretion."
::= {ipxStaticServEntry 5}
ipxStaticServNetNum OBJECT-TYPE
SYNTAX NetNumber
ACCESS read-write
STATUS mandatory
DESCRIPTION "The IPX network number portion of the IPX address of the
service."
::= {ipxStaticServEntry 6}
ipxStaticServNode OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The node portion of the IPX address of the service."
::= {ipxStaticServEntry 7}
ipxStaticServSocket OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION "The socket portion of the IPX address of the service."
::= {ipxStaticServEntry 8}
ipxStaticServHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION "The number of hops to the service."
::= {ipxStaticServEntry 9}
-- Traps
-- The section describes the traps defined for IPX.
ipxTrapCircuitDown TRAP-TYPE
ENTERPRISE ipxTraps
VARIABLES {
ipxCircSysInstance,
ipxCircIndex
}
DESCRIPTION "This trap signifies that the specified circuit has
gone down."
::= 1
ipxTrapCircuitUp TRAP-TYPE
ENTERPRISE ipxTraps
VARIABLES {
ipxCircSysInstance,
ipxCircIndex
}
DESCRIPTION "This trap signifies that the specified circuit has
come up."
::= 2
END