Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

724 lines
20 KiB

/*++
Module Name:
pci.h
Abstract:
This is the PCI bus specific header file used by device drivers.
Author:
Revision History:
--*/
#ifndef _PCI_
#define _PCI_
//
// A PCI driver can read the complete 256 bytes of configuration
// information for any PCI device by calling:
//
// ULONG
// HalGetBusData (
// IN BUS_DATA_TYPE PCIConfiguration,
// IN ULONG PciBusNumber,
// IN PCI_SLOT_NUMBER VirtualSlotNumber,
// IN PPCI_COMMON_CONFIG &PCIDeviceConfig,
// IN ULONG sizeof (PCIDeviceConfig)
// );
//
// A return value of 0 means that the specified PCI bus does not exist.
//
// A return value of 2, with a VendorID of PCI_INVALID_VENDORID means
// that the PCI bus does exist, but there is no device at the specified
// VirtualSlotNumber (PCI Device/Function number).
//
//
// begin_wdm begin_ntminiport begin_ntndis
typedef struct _PCI_SLOT_NUMBER {
union {
struct {
ULONG DeviceNumber:5;
ULONG FunctionNumber:3;
ULONG Reserved:24;
} bits;
ULONG AsULONG;
} u;
} PCI_SLOT_NUMBER, *PPCI_SLOT_NUMBER;
#define PCI_TYPE0_ADDRESSES 6
#define PCI_TYPE1_ADDRESSES 2
#define PCI_TYPE2_ADDRESSES 5
typedef struct _PCI_COMMON_CONFIG {
USHORT VendorID; // (ro)
USHORT DeviceID; // (ro)
USHORT Command; // Device control
USHORT Status;
UCHAR RevisionID; // (ro)
UCHAR ProgIf; // (ro)
UCHAR SubClass; // (ro)
UCHAR BaseClass; // (ro)
UCHAR CacheLineSize; // (ro+)
UCHAR LatencyTimer; // (ro+)
UCHAR HeaderType; // (ro)
UCHAR BIST; // Built in self test
union {
struct _PCI_HEADER_TYPE_0 {
ULONG BaseAddresses[PCI_TYPE0_ADDRESSES];
ULONG CIS;
USHORT SubVendorID;
USHORT SubSystemID;
ULONG ROMBaseAddress;
UCHAR CapabilitiesPtr;
UCHAR Reserved1[3];
ULONG Reserved2;
UCHAR InterruptLine; //
UCHAR InterruptPin; // (ro)
UCHAR MinimumGrant; // (ro)
UCHAR MaximumLatency; // (ro)
} type0;
// end_wdm end_ntminiport end_ntndis
//
// PCI to PCI Bridge
//
struct _PCI_HEADER_TYPE_1 {
ULONG BaseAddresses[PCI_TYPE1_ADDRESSES];
UCHAR PrimaryBus;
UCHAR SecondaryBus;
UCHAR SubordinateBus;
UCHAR SecondaryLatency;
UCHAR IOBase;
UCHAR IOLimit;
USHORT SecondaryStatus;
USHORT MemoryBase;
USHORT MemoryLimit;
USHORT PrefetchBase;
USHORT PrefetchLimit;
ULONG PrefetchBaseUpper32;
ULONG PrefetchLimitUpper32;
USHORT IOBaseUpper16;
USHORT IOLimitUpper16;
UCHAR CapabilitiesPtr;
UCHAR Reserved1[3];
ULONG ROMBaseAddress;
UCHAR InterruptLine;
UCHAR InterruptPin;
USHORT BridgeControl;
} type1;
//
// PCI to CARDBUS Bridge
//
struct _PCI_HEADER_TYPE_2 {
ULONG SocketRegistersBaseAddress;
UCHAR CapabilitiesPtr;
UCHAR Reserved;
USHORT SecondaryStatus;
UCHAR PrimaryBus;
UCHAR SecondaryBus;
UCHAR SubordinateBus;
UCHAR SecondaryLatency;
struct {
ULONG Base;
ULONG Limit;
} Range[PCI_TYPE2_ADDRESSES-1];
UCHAR InterruptLine;
UCHAR InterruptPin;
USHORT BridgeControl;
} type2;
// begin_wdm begin_ntminiport begin_ntndis
} u;
UCHAR DeviceSpecific[192];
} PCI_COMMON_CONFIG, *PPCI_COMMON_CONFIG;
#define PCI_COMMON_HDR_LENGTH (FIELD_OFFSET (PCI_COMMON_CONFIG, DeviceSpecific))
#define PCI_MAX_DEVICES 32
#define PCI_MAX_FUNCTION 8
#define PCI_MAX_BRIDGE_NUMBER 0xFF
#define PCI_INVALID_VENDORID 0xFFFF
//
// Bit encodings for PCI_COMMON_CONFIG.HeaderType
//
#define PCI_MULTIFUNCTION 0x80
#define PCI_DEVICE_TYPE 0x00
#define PCI_BRIDGE_TYPE 0x01
#define PCI_CARDBUS_BRIDGE_TYPE 0x02
#define PCI_CONFIGURATION_TYPE(PciData) \
(((PPCI_COMMON_CONFIG)(PciData))->HeaderType & ~PCI_MULTIFUNCTION)
#define PCI_MULTIFUNCTION_DEVICE(PciData) \
((((PPCI_COMMON_CONFIG)(PciData))->HeaderType & PCI_MULTIFUNCTION) != 0)
//
// Bit encodings for PCI_COMMON_CONFIG.Command
//
#define PCI_ENABLE_IO_SPACE 0x0001
#define PCI_ENABLE_MEMORY_SPACE 0x0002
#define PCI_ENABLE_BUS_MASTER 0x0004
#define PCI_ENABLE_SPECIAL_CYCLES 0x0008
#define PCI_ENABLE_WRITE_AND_INVALIDATE 0x0010
#define PCI_ENABLE_VGA_COMPATIBLE_PALETTE 0x0020
#define PCI_ENABLE_PARITY 0x0040 // (ro+)
#define PCI_ENABLE_WAIT_CYCLE 0x0080 // (ro+)
#define PCI_ENABLE_SERR 0x0100 // (ro+)
#define PCI_ENABLE_FAST_BACK_TO_BACK 0x0200 // (ro)
//
// Bit encodings for PCI_COMMON_CONFIG.Status
//
#define PCI_STATUS_CAPABILITIES_LIST 0x0010 // (ro)
#define PCI_STATUS_66MHZ_CAPABLE 0x0020 // (ro)
#define PCI_STATUS_UDF_SUPPORTED 0x0040 // (ro)
#define PCI_STATUS_FAST_BACK_TO_BACK 0x0080 // (ro)
#define PCI_STATUS_DATA_PARITY_DETECTED 0x0100
#define PCI_STATUS_DEVSEL 0x0600 // 2 bits wide
#define PCI_STATUS_SIGNALED_TARGET_ABORT 0x0800
#define PCI_STATUS_RECEIVED_TARGET_ABORT 0x1000
#define PCI_STATUS_RECEIVED_MASTER_ABORT 0x2000
#define PCI_STATUS_SIGNALED_SYSTEM_ERROR 0x4000
#define PCI_STATUS_DETECTED_PARITY_ERROR 0x8000
//
// The NT PCI Driver uses a WhichSpace parameter on its CONFIG_READ/WRITE
// routines. The following values are defined-
//
#define PCI_WHICHSPACE_CONFIG 0x0
#define PCI_WHICHSPACE_ROM 0x52696350
// end_wdm
//
// PCI Capability IDs
//
#define PCI_CAPABILITY_ID_POWER_MANAGEMENT 0x01
#define PCI_CAPABILITY_ID_AGP 0x02
#define PCI_CAPABILITY_ID_MSI 0x05
//
// All PCI Capability structures have the following header.
//
// CapabilityID is used to identify the type of the structure (is
// one of the PCI_CAPABILITY_ID values above.
//
// Next is the offset in PCI Configuration space (0x40 - 0xfc) of the
// next capability structure in the list, or 0x00 if there are no more
// entries.
//
typedef struct _PCI_CAPABILITIES_HEADER {
UCHAR CapabilityID;
UCHAR Next;
} PCI_CAPABILITIES_HEADER, *PPCI_CAPABILITIES_HEADER;
//
// Power Management Capability
//
typedef struct _PCI_PMC {
UCHAR Version:3;
UCHAR PMEClock:1;
UCHAR Rsvd1:1;
UCHAR DeviceSpecificInitialization:1;
UCHAR Rsvd2:2;
struct _PM_SUPPORT {
UCHAR Rsvd2:1;
UCHAR D1:1;
UCHAR D2:1;
UCHAR PMED0:1;
UCHAR PMED1:1;
UCHAR PMED2:1;
UCHAR PMED3Hot:1;
UCHAR PMED3Cold:1;
} Support;
} PCI_PMC, *PPCI_PMC;
typedef struct _PCI_PMCSR {
USHORT PowerState:2;
USHORT Rsvd1:6;
USHORT PMEEnable:1;
USHORT DataSelect:4;
USHORT DataScale:2;
USHORT PMEStatus:1;
} PCI_PMCSR, *PPCI_PMCSR;
typedef struct _PCI_PMCSR_BSE {
UCHAR Rsvd1:6;
UCHAR D3HotSupportsStopClock:1; // B2_B3#
UCHAR BusPowerClockControlEnabled:1; // BPCC_EN
} PCI_PMCSR_BSE, *PPCI_PMCSR_BSE;
typedef struct _PCI_PM_CAPABILITY {
PCI_CAPABILITIES_HEADER Header;
//
// Power Management Capabilities (Offset = 2)
//
union {
PCI_PMC Capabilities;
USHORT AsUSHORT;
} PMC;
//
// Power Management Control/Status (Offset = 4)
//
union {
PCI_PMCSR ControlStatus;
USHORT AsUSHORT;
} PMCSR;
//
// PMCSR PCI-PCI Bridge Support Extensions
//
union {
PCI_PMCSR_BSE BridgeSupport;
UCHAR AsUCHAR;
} PMCSR_BSE;
//
// Optional read only 8 bit Data register. Contents controlled by
// DataSelect and DataScale in ControlStatus.
//
UCHAR Data;
} PCI_PM_CAPABILITY, *PPCI_PM_CAPABILITY;
//
// AGP Capability
//
typedef struct _PCI_AGP_CAPABILITY {
PCI_CAPABILITIES_HEADER Header;
USHORT Minor:4;
USHORT Major:4;
USHORT Rsvd1:8;
struct _PCI_AGP_STATUS {
ULONG Rate:3;
ULONG Rsvd1:1;
ULONG FastWrite:1;
ULONG FourGB:1;
ULONG Rsvd2:3;
ULONG SideBandAddressing:1; // SBA
ULONG Rsvd3:14;
ULONG RequestQueueDepthMaximum:8; // RQ
} AGPStatus;
struct _PCI_AGP_COMMAND {
ULONG Rate:3;
ULONG Rsvd1:1;
ULONG FastWriteEnable:1;
ULONG FourGBEnable:1;
ULONG Rsvd2:2;
ULONG AGPEnable:1;
ULONG SBAEnable:1;
ULONG Rsvd3:14;
ULONG RequestQueueDepth:8;
} AGPCommand;
} PCI_AGP_CAPABILITY, *PPCI_AGP_CAPABILITY;
#define PCI_AGP_RATE_1X 0x1
#define PCI_AGP_RATE_2X 0x2
#define PCI_AGP_RATE_4X 0x4
//
// MSI (Message Signalled Interrupts) Capability
//
typedef struct _PCI_MSI_CAPABILITY {
PCI_CAPABILITIES_HEADER Header;
struct _PCI_MSI_MESSAGE_CONTROL {
USHORT MSIEnable:1;
USHORT MultipleMessageCapable:3;
USHORT MultipleMessageEnable:3;
USHORT CapableOf64Bits:1;
USHORT Reserved:8;
} MessageControl;
union {
struct _PCI_MSI_MESSAGE_ADDRESS {
ULONG Reserved:2; // always zero, DWORD aligned address
ULONG Address:30;
} Register;
ULONG Raw;
} MessageAddress; // was ULONG_PTR
//
// The rest of the Capability structure differs depending on whether
// 32bit or 64bit addressing is being used.
//
// (The CapableOf64Bits bit above determines this)
//
union {
// For 64 bit devices
struct _PCI_MSI_64BIT_DATA {
ULONG MessageUpperAddress;
USHORT MessageData;
} Bit64;
// For 32 bit devices
struct _PCI_MSI_32BIT_DATA {
USHORT MessageData;
ULONG Unused;
} Bit32;
} Data;
} PCI_MSI_CAPABILITY, *PPCI_PCI_CAPABILITY;
// begin_wdm
//
// Base Class Code encodings for Base Class (from PCI spec rev 2.1).
//
#define PCI_CLASS_PRE_20 0x00
#define PCI_CLASS_MASS_STORAGE_CTLR 0x01
#define PCI_CLASS_NETWORK_CTLR 0x02
#define PCI_CLASS_DISPLAY_CTLR 0x03
#define PCI_CLASS_MULTIMEDIA_DEV 0x04
#define PCI_CLASS_MEMORY_CTLR 0x05
#define PCI_CLASS_BRIDGE_DEV 0x06
#define PCI_CLASS_SIMPLE_COMMS_CTLR 0x07
#define PCI_CLASS_BASE_SYSTEM_DEV 0x08
#define PCI_CLASS_INPUT_DEV 0x09
#define PCI_CLASS_DOCKING_STATION 0x0a
#define PCI_CLASS_PROCESSOR 0x0b
#define PCI_CLASS_SERIAL_BUS_CTLR 0x0c
// 0d thru fe reserved
#define PCI_CLASS_NOT_DEFINED 0xff
//
// Sub Class Code encodings (PCI rev 2.1).
//
// Class 00 - PCI_CLASS_PRE_20
#define PCI_SUBCLASS_PRE_20_NON_VGA 0x00
#define PCI_SUBCLASS_PRE_20_VGA 0x01
// Class 01 - PCI_CLASS_MASS_STORAGE_CTLR
#define PCI_SUBCLASS_MSC_SCSI_BUS_CTLR 0x00
#define PCI_SUBCLASS_MSC_IDE_CTLR 0x01
#define PCI_SUBCLASS_MSC_FLOPPY_CTLR 0x02
#define PCI_SUBCLASS_MSC_IPI_CTLR 0x03
#define PCI_SUBCLASS_MSC_RAID_CTLR 0x04
#define PCI_SUBCLASS_MSC_OTHER 0x80
// Class 02 - PCI_CLASS_NETWORK_CTLR
#define PCI_SUBCLASS_NET_ETHERNET_CTLR 0x00
#define PCI_SUBCLASS_NET_TOKEN_RING_CTLR 0x01
#define PCI_SUBCLASS_NET_FDDI_CTLR 0x02
#define PCI_SUBCLASS_NET_ATM_CTLR 0x03
#define PCI_SUBCLASS_NET_OTHER 0x80
// Class 03 - PCI_CLASS_DISPLAY_CTLR
// N.B. Sub Class 00 could be VGA or 8514 depending on Interface byte
#define PCI_SUBCLASS_VID_VGA_CTLR 0x00
#define PCI_SUBCLASS_VID_XGA_CTLR 0x01
#define PCI_SUBCLASS_VID_OTHER 0x80
// Class 04 - PCI_CLASS_MULTIMEDIA_DEV
#define PCI_SUBCLASS_MM_VIDEO_DEV 0x00
#define PCI_SUBCLASS_MM_AUDIO_DEV 0x01
#define PCI_SUBCLASS_MM_OTHER 0x80
// Class 05 - PCI_CLASS_MEMORY_CTLR
#define PCI_SUBCLASS_MEM_RAM 0x00
#define PCI_SUBCLASS_MEM_FLASH 0x01
#define PCI_SUBCLASS_MEM_OTHER 0x80
// Class 06 - PCI_CLASS_BRIDGE_DEV
#define PCI_SUBCLASS_BR_HOST 0x00
#define PCI_SUBCLASS_BR_ISA 0x01
#define PCI_SUBCLASS_BR_EISA 0x02
#define PCI_SUBCLASS_BR_MCA 0x03
#define PCI_SUBCLASS_BR_PCI_TO_PCI 0x04
#define PCI_SUBCLASS_BR_PCMCIA 0x05
#define PCI_SUBCLASS_BR_NUBUS 0x06
#define PCI_SUBCLASS_BR_CARDBUS 0x07
#define PCI_SUBCLASS_BR_OTHER 0x80
// Class 07 - PCI_CLASS_SIMPLE_COMMS_CTLR
// N.B. Sub Class 00 and 01 additional info in Interface byte
#define PCI_SUBCLASS_COM_SERIAL 0x00
#define PCI_SUBCLASS_COM_PARALLEL 0x01
#define PCI_SUBCLASS_COM_OTHER 0x80
// Class 08 - PCI_CLASS_BASE_SYSTEM_DEV
// N.B. See Interface byte for additional info.
#define PCI_SUBCLASS_SYS_INTERRUPT_CTLR 0x00
#define PCI_SUBCLASS_SYS_DMA_CTLR 0x01
#define PCI_SUBCLASS_SYS_SYSTEM_TIMER 0x02
#define PCI_SUBCLASS_SYS_REAL_TIME_CLOCK 0x03
#define PCI_SUBCLASS_SYS_OTHER 0x80
// Class 09 - PCI_CLASS_INPUT_DEV
#define PCI_SUBCLASS_INP_KEYBOARD 0x00
#define PCI_SUBCLASS_INP_DIGITIZER 0x01
#define PCI_SUBCLASS_INP_MOUSE 0x02
#define PCI_SUBCLASS_INP_OTHER 0x80
// Class 0a - PCI_CLASS_DOCKING_STATION
#define PCI_SUBCLASS_DOC_GENERIC 0x00
#define PCI_SUBCLASS_DOC_OTHER 0x80
// Class 0b - PCI_CLASS_PROCESSOR
#define PCI_SUBCLASS_PROC_386 0x00
#define PCI_SUBCLASS_PROC_486 0x01
#define PCI_SUBCLASS_PROC_PENTIUM 0x02
#define PCI_SUBCLASS_PROC_ALPHA 0x10
#define PCI_SUBCLASS_PROC_POWERPC 0x20
#define PCI_SUBCLASS_PROC_COPROCESSOR 0x40
// Class 0c - PCI_CLASS_SERIAL_BUS_CTLR
#define PCI_SUBCLASS_SB_IEEE1394 0x00
#define PCI_SUBCLASS_SB_ACCESS 0x01
#define PCI_SUBCLASS_SB_SSA 0x02
#define PCI_SUBCLASS_SB_USB 0x03
#define PCI_SUBCLASS_SB_FIBRE_CHANNEL 0x04
// end_ntndis
//
// Bit encodes for PCI_COMMON_CONFIG.u.type0.BaseAddresses
//
#define PCI_ADDRESS_IO_SPACE 0x00000001 // (ro)
#define PCI_ADDRESS_MEMORY_TYPE_MASK 0x00000006 // (ro)
#define PCI_ADDRESS_MEMORY_PREFETCHABLE 0x00000008 // (ro)
#define PCI_ADDRESS_IO_ADDRESS_MASK 0xfffffffc
#define PCI_ADDRESS_MEMORY_ADDRESS_MASK 0xfffffff0
#define PCI_ADDRESS_ROM_ADDRESS_MASK 0xfffff800
#define PCI_TYPE_32BIT 0
#define PCI_TYPE_20BIT 2
#define PCI_TYPE_64BIT 4
//
// Bit encodes for PCI_COMMON_CONFIG.u.type0.ROMBaseAddresses
//
#define PCI_ROMADDRESS_ENABLED 0x00000001
//
// Reference notes for PCI configuration fields:
//
// ro these field are read only. changes to these fields are ignored
//
// ro+ these field are intended to be read only and should be initialized
// by the system to their proper values. However, driver may change
// these settings.
//
// ---
//
// All resources comsumed by a PCI device start as unitialized
// under NT. An uninitialized memory or I/O base address can be
// determined by checking it's corrisponding enabled bit in the
// PCI_COMMON_CONFIG.Command value. An InterruptLine is unitialized
// if it contains the value of -1.
//
// end_wdm end_ntminiport
// end_ntddk end_ntosp
//
// PCI_REGISTRY_INFO - this structure is passed into the HAL from
// the firmware. It signifies how many PCI bus(es) are present and
// what style of access the PCI bus(es) support.
//
typedef struct _PCI_REGISTRY_INFO {
UCHAR MajorRevision;
UCHAR MinorRevision;
UCHAR NoBuses;
UCHAR HardwareMechanism;
} PCI_REGISTRY_INFO, *PPCI_REGISTRY_INFO;
//
// PCI definitions for IOBase & IOLimit
// PCIBridgeIO2Base(a,b) - convert IOBase & IOBaseUpper16 to ULONG IOBase
// PCIBridgeIO2Limit(a,b) - convert IOLimit & IOLimitUpper6 to ULONG IOLimit
//
#define PciBridgeIO2Base(a,b) \
( ((a >> 4) << 12) + (((a & 0xf) == 1) ? (b << 16) : 0) )
#define PciBridgeIO2Limit(a,b) (PciBridgeIO2Base(a,b) | 0xfff)
#define PciBridgeMemory2Base(a) (ULONG) ((a & 0xfff0) << 16)
#define PciBridgeMemory2Limit(a) (PciBridgeMemory2Base(a) | 0xfffff)
//
// Bit encodes for PCI_COMMON_CONFIG.u.type1/2.BridgeControl
//
#define PCI_ENABLE_BRIDGE_PARITY_ERROR 0x0001
#define PCI_ENABLE_BRIDGE_SERR 0x0002
#define PCI_ENABLE_BRIDGE_ISA 0x0004
#define PCI_ENABLE_BRIDGE_VGA 0x0008
#define PCI_ENABLE_BRIDGE_MASTER_ABORT_SERR 0x0020
#define PCI_ASSERT_BRIDGE_RESET 0x0040
//
// Bit encodes for PCI_COMMON_CONFIG.u.type1.BridgeControl
//
#define PCI_ENABLE_BRIDGE_FAST_BACK_TO_BACK 0x0080
//
// Bit encodes for PCI_COMMON_CONFIG.u.type2.BridgeControl
//
#define PCI_ENABLE_CARDBUS_IRQ_ROUTING 0x0080
#define PCI_ENABLE_CARDBUS_MEM0_PREFETCH 0x0100
#define PCI_ENABLE_CARDBUS_MEM1_PREFETCH 0x0200
#define PCI_ENABLE_CARDBUS_WRITE_POSTING 0x0400
//
// Definitions needed for Access to Hardware Type 1
//
#define PCI_TYPE1_ADDR_PORT (0xCF8)
#define PCI_TYPE1_DATA_PORT 0xCFC
typedef struct _PCI_TYPE1_CFG_BITS {
union {
struct {
ULONG Reserved1:2;
ULONG RegisterNumber:6;
ULONG FunctionNumber:3;
ULONG DeviceNumber:5;
ULONG BusNumber:8;
ULONG Reserved2:7;
ULONG Enable:1;
} bits;
ULONG AsULONG;
} u;
} PCI_TYPE1_CFG_BITS, *PPCI_TYPE1_CFG_BITS;
//
// Definitions needed for Access to Hardware Type 2
//
#define PCI_TYPE2_CSE_PORT ((PUCHAR) 0xCF8)
#define PCI_TYPE2_FORWARD_PORT ((PUCHAR) 0xCFA)
#define PCI_TYPE2_ADDRESS_BASE 0xC
typedef struct _PCI_TYPE2_CSE_BITS {
union {
struct {
UCHAR Enable:1;
UCHAR FunctionNumber:3;
UCHAR Key:4;
} bits;
UCHAR AsUCHAR;
} u;
} PCI_TYPE2_CSE_BITS, PPCI_TYPE2_CSE_BITS;
typedef struct _PCI_TYPE2_ADDRESS_BITS {
union {
struct {
USHORT RegisterNumber:8;
USHORT Agent:4;
USHORT AddressBase:4;
} bits;
USHORT AsUSHORT;
} u;
} PCI_TYPE2_ADDRESS_BITS, *PPCI_TYPE2_ADDRESS_BITS;
//
// Definitions for the config cycle format on the PCI bus.
//
typedef struct _PCI_TYPE0_CFG_CYCLE_BITS {
union {
struct {
ULONG Reserved1:2;
ULONG RegisterNumber:6;
ULONG FunctionNumber:3;
ULONG Reserved2:21;
} bits;
ULONG AsULONG;
} u;
} PCI_TYPE0_CFG_CYCLE_BITS, *PPCI_TYPE0_CFG_CYCLE_BITS;
typedef struct _PCI_TYPE1_CFG_CYCLE_BITS {
union {
struct {
ULONG Reserved1:2;
ULONG RegisterNumber:6;
ULONG FunctionNumber:3;
ULONG DeviceNumber:5;
ULONG BusNumber:8;
ULONG Reserved2:8;
} bits;
ULONG AsULONG;
} u;
} PCI_TYPE1_CFG_CYCLE_BITS, *PPCI_TYPE1_CFG_CYCLE_BITS;
#endif