mirror of https://github.com/tongzx/nt5src
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
91 lines
2.8 KiB
91 lines
2.8 KiB
Configuring Power Paramters:
|
|
----------------------------
|
|
|
|
Scsiport allows adapters to configure some power settings.
|
|
|
|
NeedsSystemShutdownNotification: DWORD
|
|
If nonzero, this value tells scsiport that the adapter needs to
|
|
have its AdapterControl routine called when a system shutdown
|
|
occurs. See the section on request sense parameters below for the
|
|
location of this key.
|
|
|
|
|
|
Configuring Tunable Performance Parameters:
|
|
-------------------------------------------
|
|
|
|
Scsiport supports the following configurable perfomance parameters:
|
|
|
|
RemainInReducedMaxQueueState: DWORD
|
|
If set, this value indicates the number of seconds a logical unit will
|
|
remain in a degraded performance state in which its MaxQueueDepth has
|
|
been reduced due to one or more requests failed with QUEUE FULL status.
|
|
This value is read from ScsiPort's DeviceParameters key in the registry.
|
|
See the section on request sense parameters below for the location of
|
|
this key.
|
|
|
|
|
|
Configuring Request Sense Parameters:
|
|
-------------------------------------
|
|
|
|
Scsiport supports configurable request sense parameters on a per-adapter
|
|
basis. The following parameters may be configured under the HBA's device
|
|
entry:
|
|
|
|
TotalSenseDataBytes: DWORD [18..255]
|
|
If set, this value designates the size of the buffer Scsiport will allocate
|
|
for request sense data. If the value is not set, the default size of 18 (0x12)
|
|
bytes is used.
|
|
|
|
RequestSenseTimeout: DWORD
|
|
If set, this value designates the timeout period for REQUEST SENSE commands, in
|
|
seconds. If the value is not set, the default timeout value of 2 seconds
|
|
is used.
|
|
|
|
HKLM
|
|
System
|
|
CurrentControlSet
|
|
Enum
|
|
<bus>
|
|
<DeviceId>
|
|
<Device>
|
|
DeviceParameters
|
|
ScsiPort
|
|
DWORD TotalSenseDataBytes=<18..255>
|
|
DWORD RequestSenseTimeout=<timeout in seconds>
|
|
DWORD RemainInReducedMaxQueueState=<duration in seconds>
|
|
DWORD NeedsSystemShutdownNotification=<0|1>
|
|
|
|
Example:
|
|
HKLM
|
|
System
|
|
CurrentControlSet
|
|
Enum
|
|
PCI
|
|
VEN_9004&DEV_6178&SUBSYS_78619004&REV_03
|
|
3&1b3e6122&0&5070
|
|
DeviceParameters
|
|
ScsiPort
|
|
TotalSenseDataBytes=0xff
|
|
RequestSenseTimeout=0xa
|
|
RemainInMaxQueueState=0x1e
|
|
NeedsSystemShutdownNotification=1
|
|
|
|
|
|
Verifier:
|
|
--------
|
|
|
|
To enable the scsi verifier, add the following registry entry to the scsiport
|
|
control entry...
|
|
|
|
HKLM\system\currentcontrolset\control\scsiport
|
|
Verifier
|
|
VerifyLevel = <verifier level>
|
|
|
|
The following values control verifier behavior...
|
|
#define SP_DONT_CHK_HW_INITIALIZE_DURATION 0x80000000
|
|
#define SP_DONT_CHK_ACTIVE_UNTAGGED_REQUEST 0x40000000
|
|
#define SP_DONT_CHK_REQUESTS_ON_RESET 0x20000000
|
|
|
|
Also, from the debugger, setting SpVrfyLevel=0xffffffff will disable the
|
|
verifier.
|
|
|