windows-xp/Source/XPSP1/NT/base/busdrv/pccard/inc/exca.h

/*++

Copyright (c) 1994 Microsoft Corporation

Module Name:

    exca.h

Abstract:

    This module defines the 82365SL chip, and subsequent chips based on it.

Author(s):

    Jeff McLeman ([email protected])

Revisions:
    Added misc stuff
         Ravisankar Pudipeddi (ravisp) 1 Dec 1996

--*/

#ifndef _PCMCIA_EXCA_H_
#define _PCMCIA_EXCA_H_
//
// For initial debug
//

#define PCMCIA_PROTO 1

//
// Memory window sizes that will be allocated
// for this controller - to map card memory
//
#define PCIC_WINDOW_SIZE                 0x1000  //(4K)
#define PCIC_WINDOW_ALIGNMENT            0x1000  //(4K)

//
// Define on chip registers
//

#define PCIC_IDENT             0x00
#define PCIC_STATUS            0x01
#define PCIC_PWR_RST           0x02
#define PCIC_INTERRUPT         0x03
#define PCIC_CARD_CHANGE       0x04
#define PCIC_CARD_INT_CONFIG   0x05
#define PCIC_ADD_WIN_ENA       0x06

#define PCIC_IO_CONTROL        0x07
#define PCIC_IO_ADD0_STRT_L    0x08
#define PCIC_IO_ADD0_STRT_H    0x09
#define PCIC_IO_ADD0_STOP_L    0x0a
#define PCIC_IO_ADD0_STOP_H    0x0b
#define PCIC_IO_ADD1_STRT_L    0x0c
#define PCIC_IO_ADD1_STRT_H    0x0d
#define PCIC_IO_ADD1_STOP_L    0x0e
#define PCIC_IO_ADD1_STOP_H    0x0f

#define PCIC_MEM_ADD0_STRT_L   0x10
#define PCIC_MEM_ADD0_STRT_H   0x11
#define PCIC_MEM_ADD0_STOP_L   0x12
#define PCIC_MEM_ADD0_STOP_H   0x13
#define PCIC_CRDMEM_OFF_ADD0_L 0x14
#define PCIC_CRDMEM_OFF_ADD0_H 0x15

#define PCIC_MEM_ADD1_STRT_L   0x18
#define PCIC_MEM_ADD1_STRT_H   0x19
#define PCIC_MEM_ADD1_STOP_L   0x1a
#define PCIC_MEM_ADD1_STOP_H   0x1b
#define PCIC_CRDMEM_OFF_ADD1_L 0x1c
#define PCIC_CRDMEM_OFF_ADD1_H 0x1d


#define PCIC_MEM_ADD2_STRT_L   0x20
#define PCIC_MEM_ADD2_STRT_H   0x21
#define PCIC_MEM_ADD2_STOP_L   0x22
#define PCIC_MEM_ADD2_STOP_H   0x23
#define PCIC_CRDMEM_OFF_ADD2_L 0x24
#define PCIC_CRDMEM_OFF_ADD2_H 0x25

#define PCIC_MEM_ADD3_STRT_L   0x28
#define PCIC_MEM_ADD3_STRT_H   0x29
#define PCIC_MEM_ADD3_STOP_L   0x2a
#define PCIC_MEM_ADD3_STOP_H   0x2b
#define PCIC_CRDMEM_OFF_ADD3_L 0x2c
#define PCIC_CRDMEM_OFF_ADD3_H 0x2d

#define PCIC_MEM_ADD4_STRT_L   0x30
#define PCIC_MEM_ADD4_STRT_H   0x31
#define PCIC_MEM_ADD4_STOP_L   0x32
#define PCIC_MEM_ADD4_STOP_H   0x33
#define PCIC_CRDMEM_OFF_ADD4_L 0x34
#define PCIC_CRDMEM_OFF_ADD4_H 0x35


#define PCIC_IO_WIN0_OFFSET_L  0x36
#define PCIC_IO_WIN0_OFFSET_H  0x37
#define PCIC_IO_WIN1_OFFSET_L  0x38
#define PCIC_IO_WIN1_OFFSET_H  0x39

//
// TI registers
//

#define PCIC_TI_CARD_DETECT        0x16
#define PCIC_TI_GLOBAL_CONTROL     0x1e

//
// Topic registers
//
#define PCIC_TO_ADDITIONAL_GENCTRL 0x16
#define PCIC_TO_MMI_CTRL           0x3c
#define PCIC_TO_FUNC_CTRL          0x3e

//
// RICOH registers
//

#define PCIC_RICOH_MISC_CTRL1      0x2f
//
// Other Cirrus Logic registers
//
#define PCIC_CL_MISC_CTRL1      0x16
#define PCIC_CL_MISC_CTRL2      0x1e
#define PCIC_CL_CHIP_INFO      0x1f
#define PCIC_CL_MISC_CTRL3       0x125
#define PCIC_CL_MASK_REV       0x134
#define PCIC_CL_PRODUCT_ID     0x135
#define PCIC_CL_DEV_CAP_A      0x136
#define PCIC_CL_DEV_CAP_B      0x137
#define PCIC_CL_DEV_IMP_A      0x138
#define PCIC_CL_DEV_IMP_B      0x139
#define PCIC_CL_DEV_IMP_C      0x13a
#define PCIC_CL_DEV_IMP_D      0x13b

//Cirrus Logic Miscellaneous Control 1 Register bits
#define CL_MC1_5V_DETECT            0x01
#define CL_MC1_MM_ENABLE            0x01
#define CL_MC1_VCC_33V              0x02
#define CL_MC1_PULSE_MGMT_INT       0x04
#define CL_MC1_PULSE_SYSTEM_IRQ     0x08
#define CL_MC1_SPKR_ENABLE          0x10
#define CL_MC1_INPACK_ENABLE        0x80

//Cirrus Logic Miscellaneous Control 2 Register bits
#define CL_MC2_BFS                  0x01
#define CL_MC2_LPDYNAMIC_MODE       0x02
#define CL_MC2_SUSPEND              0x04
#define CL_MC2_5VCORE               0x08
#define CL_MC2_DRIVELED_ENABLE      0x10
#define CL_MC2_TIMERCLK_DIVIDE      0x10
#define CL_MC2_3STATE_BIT7          0x20
#define CL_MC2_DMA_SYSTEM           0x40
#define CL_MC2_IRQ15_RIOUT          0x80

//Cirrus Logic Miscellaneous Control 3 Register bits
#define CL_MC3_INTMODE_MASK             0x03
#define CL_MC3_INTMODE_SERIAL           0x00
#define CL_MC3_INTMODE_EXTHW            0x01
#define CL_MC3_INTMODE_PCIWAY           0x02
#define CL_MC3_INTMODE_PCI              0x03    //default
#define CL_MC3_PWRMODE_MASK             0x0c
#define CL_MC3_HWSUSPEND_ENABLE         0x10

//
// Cirrus Logic extension register 1
//
#define PCIC_CIRRUS_EXTENDED_INDEX   0x2E
#define PCIC_CIRRUS_INDEX_REG        0x2F
#define PCIC_CIRRUS_EXTENSION_CTRL_1 0x03



//                
// Databook registers
//
#define PCIC_DBK_ZV_ENABLE    0x3b

//
// Opti registers
//
#define PCIC_OPTI_GLOBAL_CTRL 0x1e


//
// This is only for cardbus controllers
//
#define PCIC_PAGE_REG         0x40

//
//
// Define offset to socket A and B
//

#define PCIC_SOCKETA_OFFSET    0x00
#define PCIC_SOCKETB_OFFSET    0x40


#define PCIC_REVISION         0x82
#define PCIC_REVISION2        0x83
#define PCIC_REVISION3        0x84
#define PCIC_SCM_REVISION     0xAB

#define SOCKET1               PCIC_SOCKETA_OFFSET
#define SOCKET2               PCIC_SOCKETB_OFFSET

#define CARD_DETECT_1         0x4
#define CARD_DETECT_2         0x8

#define CARD_IN_SOCKET_A      0x1
#define CARD_IN_SOCKET_B      0x2

#define CARD_TYPE_MODEM       0x1
#define CARD_TYPE_ENET        0x2
#define CARD_TYPE_DISK        0x3

//
// For Cirrus Logic PCI controllers
//
#define PCIC_CIRRUS_INTA      0x3
#define PCIC_CIRRUS_INTB      0x4
#define PCIC_CIRRUS_INTC      0x5
#define PCIC_CIRRUS_INTD      0x7

//
// Support IRQs:
// 15,14, , ,  11,10, 9, ,  7, ,5,4,  3, , ,
// 1  1  0  0   1  1  1 0   1 0 1 1   1 0 0 0
//
#define PCIC_SUPPORTED_INTERRUPTS 0xCEB8

//
// Support IRQs:
// 15,14, , ,  11,10, 9, ,  7, ,5,4,  3, , ,
// 0  1  0  0   0  1  0 0   1 0 1 1   1 0 0 0
//
#define CL_SUPPORTED_INTERRUPTS 0x44B8

//
// Support IRQs for NEC_98:
//   ,  ,  ,12,   ,10,  ,  ,    ,6 ,5 ,  ,  3 ,  ,  ,
// 0  0  0  1   0  1  0  0    0  1  1  0    1  0  0  0
//
#define PCIC_SUPPORTED_INTERRUPTS_NEC_98 0x1468



/*** 16-Bit Socket Constants
 */

//Device IDs for various controllers
#define DEVID_VALID_LO        0x82
#define DEVID_CL        0x82
#define DEVID_VADEM        0x83
#define DEVID_RICOH        0x83
#define DEVID_GEN_PCIC        0x84
#define DEVID_IBM_KING        0x8a
#define DEVID_OPTI_82C824     0x87
#define DEVID_OPTI_82C852     0x8f

//TI PCI-1130 specific registers
#define PCIC_TI_MEMWIN_PAGE      0x40

//ID and Revision Register bits
#define IDREV_REV_MASK                  0x0f
#define IDREV_IFID_MASK                 0xc0
#define IDREV_IFID_IO                   0x00
#define IDREV_IFID_MEM                  0x40
#define IDREV_IFID_IOMEM                0x80

//Interface Status Register bits
#define IFS_BVD_MASK                    0x03
#define IFS_BVD1                        0x01
#define IFS_BVD2                        0x02
#define IFS_CD_MASK                     0x0c
#define IFS_CD1                         0x04
#define IFS_CD2                         0x08
#define IFS_WP                          0x10
#define IFS_RDYBSY                      0x20
#define IFS_CARDPWR_ACTIVE              0x40
#define IFS_VPP_VALID                   0x80

//Power and RESETDRV Control Register bits

#define PC_VPP1_MASK                    0x03
#define PC_VPP2_MASK                    0x0c
#define PC_CARDPWR_ENABLE               0x10
#define PC_AUTOPWR_ENABLE               0x20
#define PC_RESETDRV_DISABLE             0x40
#define PC_OUTPUT_ENABLE                0x80

#define PC_PWRON_BITS                   (PC_OUTPUT_ENABLE | PC_AUTOPWR_ENABLE)

#define PC_VPP_NO_CONNECT     0x00
#define PC_VPP_SETTO_VCC      0x01
#define PC_VPP_SETTO_VPP      0x02
#define PC_VPP_RESERVED       0x03

#define PC_VPP_VLSI_MASK      0x03
#define PC_VPP_VLSI_NO_CONNECT      0x00
#define PC_VPP_VLSI_050V      0x01
#define PC_VPP_VLSI_120V      0x02
#define PC_VPP_VLSI_RESERVED     0x03

#define PC_VCC_TOPIC_033V     0x08

#define PC_VCC_VLSI_MASK      0x18
#define PC_VCC_VLSI_NO_CONNECT      0x00
#define PC_VCC_VLSI_RESERVED     0x08
#define PC_VCC_VLSI_050V      0x10
#define PC_VCC_VLSI_033V      0x18

#define PC_VPP_KING_MASK      0x03
#define PC_VPP_KING_NO_CONNECT      0x00
#define PC_VPP_KING_050V      0x01
#define PC_VPP_KING_120V      0x02
#define PC_VPP_KING_SETTO_VCC    0x03

#define PC_VCC_KING_MASK      0x0c
#define PC_VCC_KING_NO_CONNECT      0x00
#define PC_VCC_KING_050V      0x04
#define PC_VCC_KING_RESERVED     0x08
#define PC_VCC_KING_033V      0x0c

#define PC_VPP_OPTI_MASK      0x03
#define PC_VPP_OPTI_NO_CONNECT      0x00
#define PC_VPP_OPTI_SETTO_VCC    0x01
#define PC_VPP_OPTI_120V      0x02
#define PC_VPP_OPTI_0V        0x03

#define PC_VCC_OPTI_MASK      0x18
#define PC_VCC_OPTI_NO_CONNECT      0x00
#define PC_VCC_OPTI_033V      0x08
#define PC_VCC_OPTI_050V      0x10
#define PC_VCC_OPTI_0XXV      0x18

//Interrupt and General Control Register bits
#define IGC_IRQ_MASK                    0x0f
#define IGC_INTR_ENABLE                 0x10
#define IGC_PCCARD_IO                   0x20
#define IGC_PCCARD_RESETLO              0x40
#define IGC_RINGIND_ENABLE              0x80

//Card Status Change Register bits
#define CSC_CHANGE_MASK                 0x0f
#define CSC_BATT_DEAD                   0x01
#define CSC_BATT_WARNING                0x02
#define CSC_BATT_MASK         (CSC_BATT_DEAD | CSC_BATT_WARNING)
#define CSC_READY_CHANGE                0x04
#define CSC_CD_CHANGE                   0x08

//Card Status Change Interrupt Configuration Register bits
#define CSCFG_ENABLE_MASK               0x0f
#define CSCFG_BATT_DEAD                 0x01
#define CSCFG_BATT_WARNING              0x02
#define CSCFG_BATT_MASK       (CSCFG_BATT_DEAD | CSCFG_BATT_WARNING)
#define CSCFG_READY_ENABLE              0x04
#define CSCFG_CD_ENABLE                 0x08
#define CSCFG_IRQ_MASK                  0xf0

//Address Window Enable Register bits
#define WE_MEM0_ENABLE                  0x01
#define WE_MEM1_ENABLE                  0x02
#define WE_MEM2_ENABLE                  0x04
#define WE_MEM3_ENABLE                  0x08
#define WE_MEM4_ENABLE                  0x10
#define WE_MEMWIN_MASK        (WE_MEM0_ENABLE | WE_MEM1_ENABLE | \
                WE_MEM2_ENABLE | WE_MEM3_ENABLE | \
                WE_MEM4_ENABLE)
#define WE_MEMCS16_DECODE               0x20
#define WE_IO0_ENABLE                   0x40
#define WE_IO1_ENABLE                   0x80
#define WE_IOWIN_MASK         (WE_IO0_ENABLE | WE_IO1_ENABLE)

//I/O Control Register bits
#define IOC_IO0_MASK                    0x0f
#define IOC_IO0_DATASIZE                0x01
#define IOC_IO0_IOCS16                  0x02
#define IOC_IO0_ZEROWS                  0x04
#define IOC_IO0_WAITSTATE               0x08
#define IOC_IO1_MASK                    0xf0
#define IOC_IO1_DATASIZE                0x10
#define IOC_IO1_IOCS16                  0x20
#define IOC_IO1_ZEROWS                  0x40
#define IOC_IO1_WAITSTATE               0x80

//Card Detection and General Control Register
#define CDGC_SW_DET_INT       0x20

//Memory Window Start Register bits
#define MEMBASE_ADDR_MASK               0x0fff
#define MEMBASE_ZEROWS                  0x4000
#define MEMBASE_16BIT                   0x8000

//Memory Window Stop Register bits
#define MEMEND_ADDR_MASK                0x0fff
#define MEMEND_WS_MASK                  0xc000

//Memory Window Offset Register bits
#define MEMOFF_ADDR_MASK                0x3fff
#define MEMOFF_REG_ACTIVE               0x4000
#define MEMOFF_WP                       0x8000

//
//Masks used to calculate 2's-complement based offset
#define OFFSETCALC_BASE_MASK            0x00FFFFFF
#define OFFSETCALC_OFFSET_MASK          0x03FFFFFF

//Cirrus Logic Miscellaneous Control 1 Register bits
#define CL_MC1_5V_DETECT      0x01
#define CL_MC1_MM_ENABLE      0x01
#define CL_MC1_VCC_33V        0x02
#define CL_MC1_PULSE_MGMT_INT    0x04
#define CL_MC1_PULSE_SYSTEM_IRQ     0x08
#define CL_MC1_SPKR_ENABLE    0x10
#define CL_MC1_INPACK_ENABLE     0x80

//Cirrus Logic Miscellaneous Control 2 Register bits
#define CL_MC2_BFS         0x01
#define CL_MC2_LPDYNAMIC_MODE    0x02
#define CL_MC2_SUSPEND        0x04
#define CL_MC2_5VCORE         0x08
#define CL_MC2_DRIVELED_ENABLE      0x10
#define CL_MC2_TIMERCLK_DIVIDE      0x10
#define CL_MC2_3STATE_BIT7    0x20
#define CL_MC2_DMA_SYSTEM     0x40
#define CL_MC2_IRQ15_RIOUT    0x80

//Cirrus Logic Miscellaneous Control 3 Register bits
#define CL_MC3_INTMODE_MASK             0x03
#define CL_MC3_INTMODE_SERIAL           0x00
#define CL_MC3_INTMODE_EXTHW            0x01
#define CL_MC3_INTMODE_PCIWAY           0x02
#define CL_MC3_INTMODE_PCI              0x03    //default
#define CL_MC3_PWRMODE_MASK             0x0c
#define CL_MC3_HWSUSPEND_ENABLE         0x10
#define CL_MC3_MM_ARM         0x80

//Cirrus Logic Chip Info Register bits
#define CL_CI_REV_MASK        0x1e
#define CL_CI_DUAL_SOCKET     0x20
#define CL_CI_CHIP_ID         0xc0

//Cirrus Logic Mask Revision Register bits
#define CL_MSKREV_MASK        0x0f

//Cirrus Logic Product ID Register bits
#define CL_PID_PRODUCT_CODE_MASK 0x0f
#define CL_PID_FAMILY_CODE_MASK     0xf0

//Cirrus Logic Device Capability Register A bits
#define CL_CAPA_NUMSKT_MASK      0x03
#define CL_CAPA_IDE_INTERFACE    0x04
#define CL_CAPA_SLAVE_DMA     0x08
#define CL_CAPA_CPSTB_CAPABLE    0x20
#define CL_CAPA_PER_SKT_LED      0x80

//Cirrus Logic Device Capability Register B bits
#define CL_CAPB_CARDBUS_CAPABLE     0x01
#define CL_CAPB_LOCK_SUPPORT     0x02
#define CL_CAPB_CLKRUN_SUPPORT      0x04
#define CL_CAPB_EXT_DEF       0x80

//Cirrus Logic Device Implementation Register A bits
#define CL_IMPA_NUMSKT_MASK      0x03
#define CL_IMPA_SLAVE_DMA     0x04
#define CL_IMPA_VS1_VS2       0x08
#define CL_IMPA_GPSTB_A       0x10
#define CL_IMPA_GPSTB_B       0x20
#define CL_IMPA_HW_SUSPEND    0x40
#define CL_IMPA_RI_OUT        0x80

//Cirrus Logic Device Implementation Register B bits
#define CL_IMPB_033_VCC       0x01
#define CL_IMPB_050_VCC       0x02
#define CL_IMPB_0YY_VCC       0x04
#define CL_IMPB_0XX_VCC       0x08
#define CL_IMPB_120_VPP       0x10
#define CL_IMPB_VPP_VCC_1A    0x20
#define CL_IMPB_RFRATED_SKT      0x40

//Cirrus Logic Device Implementation Register C bits
#define CL_IMPC_LED        0x01
#define CL_IMPC_PER_SKT_LED      0x02
#define CL_IMPC_SPK        0x04
#define CL_IMPC_ZVP_A         0x08
#define CL_IMPC_ZVP_B         0x10

//Cirrus Logic Device Implementation Register D bits
#define CL_IMPD_CLKRUN        0x01
#define CL_IMPD_LOCK       0x02
#define CL_IMPD_EXT_CLK       0x40

//Cirrus Logic Extension Registers
#define CLEXTREG_EXTCTRL_1    0x03
#define CLEXTREG_MEMWIN0_HIADDR     0x05
#define CLEXTREG_MEMWIN1_HIADDR     0x06
#define CLEXTREG_MEMWIN2_HIADDR     0x07
#define CLEXTREG_MEMWIN3_HIADDR     0x08
#define CLEXTREG_MEMWIN4_HIADDR     0x09
#define CLEXTREG_EXT_DATA     0x0a
#define CLEXTREG_EXTCTRL_2    0x0b

//TI Global Control Register bits
#define TI_GCTRL_PWRDOWN_MODE_ENABLE    0x01
#define TI_GCTRL_CSC_LEVEL_MODE         0x02
#define TI_GCTRL_INTFLAG_CLEAR_MODE     0x04
#define TI_GCTRL_CARDA_LEVEL_MODE       0x08
#define TI_GCTRL_CARDB_LEVEL_MODE       0x10

//Cirrus Logic External Data Register bits (Index=0x6f,ExtIndex=0x0a)
#define CL_EDATA_A_VS1        0x01
#define CL_EDATA_A_VS2        0x02
#define CL_EDATA_A_5V         (CL_EDATA_A_VS1 | CL_EDATA_A_VS2)
#define CL_EDATA_B_VS1        0x04
#define CL_EDATA_B_VS2        0x08
#define CL_EDATA_B_5V         (CL_EDATA_B_VS1 | CL_EDATA_B_VS2)

//Toshiba TOPIC95 Function Control Register bits
#define TO_FCTRL_CARDPWR_ENABLE     0x01
#define TO_FCTRL_VSSTATUS_ENABLE 0x02
#define TO_FCTRL_PPEC_TIMING_ENABLE 0x04
#define TO_FCTRL_CARD_TIMING_ENABLE 0x08
#define TO_FCTRL_CARD_MEMPAGE_ENABLE   0x10
#define TO_FCTRL_DMA_ENABLE      0x20
#define TO_FCTRL_PWRCTRL_BUFFER_ENABLE 0x40

//Toshiba TOPIC95 Multimedia Interface Control Register bits
#define TO_MMI_VIDEO_CTRL     0x01
#define TO_MMI_AUDIO_CTRL     0x02
#define TO_MMI_REV_BIT        0x80

//Toshiba TOPIC95 Addition General Control Register bits
#define TO_GCTRL_CARDREMOVAL_RESET  0x02
#define TO_GCTRL_SWCD_INT     0x20

//Databook DB87144 Zoom Video Port Enable Register
#define DBK_ZVE_MODE_MASK     0x03
#define DBK_ZVE_STANDARD_MODE    0x00
#define DBK_ZVE_MM_MODE       0x03

//OPTi Global Control Register bits
#define OPTI_ZV_ENABLE                  0x20

//VLSI ELC Constants
#define VLSI_ELC_ALIAS        0x8000
#define VLSI_EA2_EA_ENABLE    0x10
#define VLSI_CC_VS1        0x04

//VADEM Constants
#define VADEM_UNLOCK_SEQ1     0x0e
#define VADEM_UNLOCK_SEQ2     0x37
#define VADEM_MISC_UNLOCK_VADEMREV  0xc0
#define VADEM_IDREV_VG469_REV    0x0c
#define VADEM_VSEL_VCC_MASK      0x03
#define VADEM_VSEL_VCC_050V      0x00
#define VADEM_VSEL_VCC_033V      0x01
#define VADEM_VSEL_VCC_XXXV      0x02
#define VADEM_VSEL_VCC_033VB     0x03
#define VADEM_VSEL_SKT_MIXEDVOLT 0x40
#define VADEM_VSENSE_A_VS1    0x01
#define VADEM_VSENSE_A_VS2    0x02
#define VADEM_VSENSE_B_VS1    0x04
#define VADEM_VSENSE_B_VS2    0x08
#define VADEM_VSENSE_050V_ONLY      0x03

//IBM King Constants
#define KING_CVS_VS1       0x01
#define KING_CVS_VS2       0x02
#define KING_CVS_VS_MASK      (KING_CVS_VS1 | KING_CVS_VS2)
#define KING_CVS_5V        (KING_CVS_VS1 | KING_CVS_VS2)
#define KING_CVS_GPI       0x80

//Ricoh RL5C466 Miscellaneous Control 1 Register bits
#define RICOH_MC1_VS                    0x01
#define RICOH_MC1_IREQ_SENSE_SEL        0x02
#define RICOH_MC1_INPACK_ENABLE         0x04
#define RICOH_MC1_ZV_ENABLE             0x08
#define RICOH_MC1_DMA_ENABLE_MASK       0x30
#define RICOH_MC1_DMA_DISABLE           0x00
#define RICOH_MC1_DMA_INPACK            0x10
#define RICOH_MC1_DMA_IOIS16            0x20
#define RICOH_MC1_DMA_SPKR              0x30

//Misc. Constants
#define EXCAREGBASE_SPACE     0x40
#define NUMWIN_PCCARD16                 7       //5 mem + 2 io per socket
#define NUMWIN_PC16_MEM                 5
#define NUMWIN_PC16_IO                  2
#define PCCARD_IOWIN_START              5

//These are default values for the slowest and fastest memory speeds supported.
//It may be necessary to change the actual values with arguments, if the bus
//speed is not the default 8MHz/8.33MHz, which gives 120ns-125ns per cycle.
//Note that the SLOW_MEM_SPEED should be the same as the default
//WaitToSpeed[3], and FAST_MEM_SPEED might as well be 1ns, since the socket
//will support arbitrarily fast memory.
#define SLOW_MEM_SPEED                  0x72    //700ns
#define FAST_MEM_SPEED                  0x08    //1ns

//
// Values for various delays for R2 cards
//
#define PWRON_DELAY                     400000  //400ms

#define  PCMCIA_DEFAULT_READY_DELAY_ITER       850
#define  PCMCIA_DEFAULT_READY_STALL            10000     // 10 millesec

#define PCMCIA_DEFAULT_PCIC_MEMORY_WINDOW_DELAY  3000    // 3 msec
#define PCMCIA_DEFAULT_PCIC_RESET_WIDTH_DELAY    100     // 100 usec
#define PCMCIA_DEFAULT_PCIC_RESET_SETUP_DELAY    70000   // 70 msec

#define PCMCIA_DEFAULT_ATTRIBUTE_MEMORY_LOW      0xD0000
#define PCMCIA_DEFAULT_ATTRIBUTE_MEMORY_HIGH     0xE0000
#define PCMCIA_DEFAULT_IO_LOW                    0x0
#define PCMCIA_DEFAULT_IO_HIGH                   0xFFFF

//I/O Control Register default nibble values
//The Xircom net PC cards fails with a 16-bit wait on the AcerNote which
//has a Cirrus Logic controller.  Why the addition of a wait state causes
//this to fail is a mystery.  The Socket EA PC card fails on the IBM ThinkPad
//755 if the 16-bit wait state is not set.
#define DEF_IOC_8BIT                     0x00
#define DEF_IOC_16BIT                   (IOC_IO0_DATASIZE | IOC_IO0_IOCS16 | \
                                         IOC_IO0_WAITSTATE)
#endif  // _PCMCIA_EXCA_H_