Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

393 lines
11 KiB

/*++
Copyright (c) 1998 Microsoft Corporation
Module Name:
nic1394.h
Abstract:
This module defines the structures, macros, and manifests available
to IEE1394-aware network components.
Revision History:
09/14/1998 JosephJ Created.
--*/
#ifndef _NIC1394_H_
#define _NIC1394_H_
///////////////////////////////////////////////////////////////////////////////////
// ADDRESS FAMILY VERSION INFORMATION
///////////////////////////////////////////////////////////////////////////////////
//
// The current major and minor version, respectively, of the NIC1394 address family.
//
#define NIC1394_AF_CURRENT_MAJOR_VERSION 5
#define NIC1394_AF_CURRENT_MINOR_VERSION 0
///////////////////////////////////////////////////////////////////////////////////
// MEDIA PARAMETERS //
///////////////////////////////////////////////////////////////////////////////////
//
// 1394 FIFO Address, consisting of the 64-bit UniqueID and the
// 48-bit address offset.
//
typedef struct _NIC1394_FIFO_ADDRESS
{
UINT64 UniqueID;
ULONG Off_Low;
USHORT Off_High;
} NIC1394_FIFO_ADDRESS, *PNIC1394_FIFO_ADDRESS;
// enum to identify which of the two modes of transmission on a 1394 is to be used
//
//
typedef enum _NIC1394_ADDRESS_TYPE
{
NIC1394AddressType_Channel, // Indicates this is a channel address
NIC1394AddressType_FIFO, // Indicates this is a FIFO address
} NIC1394_ADDRESS_TYPE, *PNIC1394_ADDRESS_TYPE;
//
// General form of a 1394 destination, which can specify either a 1394 channel or
// a FIFO address. This structure forms part of the 1394 media-specific
// parameters.
//
typedef struct _NIC1394_DESTINATION
{
union
{
UINT Channel; // IEEE1394 channel number.
NIC1394_FIFO_ADDRESS FifoAddress; // IEEE1394 NodeID and address offset.
};
NIC1394_ADDRESS_TYPE AddressType; // Address- asynch or isoch
} NIC1394_DESTINATION, *PNIC1394_DESTINATION;
//
// Special channels values
//
#define NIC1394_ANY_CHANNEL ((UINT)-1) // miniport should pick channel.
#define NIC1394_BROADCAST_CHANNEL ((UINT)-2) // special broadcast channel.
//
// This is the value of the ParamType field in the CO_SPECIFIC_PARAMETERS structure
// when the Parameters[] field contains IEEE1394 media specific values in the
// structure NIC1394_MEDIA_PARAMETERS.
//
#define NIC1394_MEDIA_SPECIFIC 0x13940000
//
// NOTE:
// The CO_MEDIA_PARAMETERS.Flags field for FIFO vcs must specify either TRANSMIT_VC
// or RECEIVE_VC, not both. If RECEIVE_VC is specified for a FIFO vc, this vc is
// used to receive on a local FIFO. In this case, the Destination.RecvFIFO field
// must be set to all-0s when creating the vc. On activation of the vc,
// this field of the updated media parameters will contain the local nodes unique ID
// and the allocated FIFO address.
//
//
// 1394 Specific Media parameters - this is the Media specific structure for 1394
// that goes into MediaParameters->MediaSpecific.Parameters.
//
typedef struct _NIC1394_MEDIA_PARAMETERS
{
//
// Identifies destination type (channel or FIFO) and type-specific address.
//
NIC1394_DESTINATION Destination;
//
// Bitmap encoding characteristics of the vc. One or more NIC1394_VCFLAG_*
// values.
//
ULONG Flags;
//
// Maximum size, in bytes, of blocks to be sent on this vc. Must be set to 0
// if this is a recv-only VCs. The miniport will choose a block size that is a
// minimum of this value and the value dictated by the bus speed map.
// Special value (ULONG -1) indicates "maximum possible block size."
UINT MaxSendBlockSize;
//
// One of the SCODE_* constants defined in 1394.h. Indicates
// the maximum speed to be used for blocks sent on this vc. Must be set to 0
// if this is a recv-only VC. The miniport will choose a speed that is a minimum
// of this value and the value dicated by the bus speed map.
// Special value (ULONG -1) indicates "maximum possible speed."
//
// TODO: change to ... MaxSendSpeedCode;
//
UINT MaxSendSpeed;
//
// Size, in bytes, of the largest packet that will be sent or received on
// this VC. The miniport may use this information to set up internal buffers
// for link-layer fragmentation and reassembly. The miniport will
// fail attempts to send packets and will discard received packets if the
// size of these packets is larger than the MTU.
//
UINT MTU;
//
// Amount of bandwidth to reserve, in units of bytes per isochronous frame.
// Applies only for isochronous transmission, and must be set to 0 for
// asynchronous transmission (i.e., if the NIC1394_VCFLAG_ISOCHRONOUS bit is 0).
//
UINT Bandwidth;
//
// One or more NIC1394_FRAMETYPE_* values. The miniport will attempt to send up
// only pkts with these protocols. However it may send other pkts.
// The client should be able to deal with this. Must be set to 0 if
// no framing is used (i.e., if the NIC1394_VCFLAG_FRAMED bit is 0).
//
ULONG RecvFrameTypes;
} NIC1394_MEDIA_PARAMETERS, *PNIC1394_MEDIA_PARAMETERS;
//
// NIC1394_MEDIA_PARAMETERS.Flags bitfield values
//
//
// Indicates VC will be used for isochronous transmission.
//
#define NIC1394_VCFLAG_ISOCHRONOUS (0x1 << 1)
//
// Indicates that the vc is used for framed data. If set, the miniport will
// implement link-level fragmentation and reassembly. If clear, the miniport
// will treat data sent and received on this vc as raw data.
//
#define NIC1394_VCFLAG_FRAMED (0x1 << 2)
//
// Indicates the miniport should allocate the necessary bus resources.
// Currently this only applies for non-broadcast channels, in which case
// the bus resources consist of the network channel number and (for isochronous
// vc's) the bandwidth specified in Bandwidth field.
// This bit does not apply (and should be 0) when creating the broadcast channel
// and either transmit or receive FIFO vcs.
//
#define NIC1394_VCFLAG_ALLOCATE (0x1 << 3)
//
// End of NIC1394_MEDIA_PARAMETERS.Flags bitfield values.
//
//
// NIC1394_MEDIA_PARAMETERS.FrameType bitfield values
//
#define NIC1394_FRAMETYPE_ARP (0x1<<0) // Ethertype 0x806
#define NIC1394_FRAMETYPE_IPV4 (0x1<<1) // Ethertype 0x800
#define NIC1394_FRAMETYPE_IPV4MCAP (0x1<<2) // Ethertype 0x8861
///////////////////////////////////////////////////////////////////////////////////
// INFORMATIONAL OIDs //
///////////////////////////////////////////////////////////////////////////////////
//
// the structure for returning basic information about the miniport
// returned in response to OID_NIC1394_LOCAL_NODE_INFO. Associated with
// the address family handle.
//
typedef struct _NIC1394_LOCAL_NODE_INFO
{
UINT64 UniqueID; // This node's 64-bit Unique ID.
ULONG BusGeneration; // 1394 Bus generation ID.
NODE_ADDRESS NodeAddress; // Local nodeID for the current bus
// generation.
USHORT Reserved; // Padding.
UINT MaxRecvBlockSize; // Maximum size, in bytes, of blocks
// that can be read.
UINT MaxRecvSpeed; // Max speed which can be accepted
// -- minimum
// of the max local link speed and
// the max local PHY speed.
} NIC1394_LOCAL_NODE_INFO, *PNIC1394_LOCAL_NODE_INFO;
//
// The structure for returning basic information about the specified vc
// returned in response to OID_NIC1394_VC_INFO. Associated with
// a vc handle
//
typedef struct _NIC1394_VC_INFO
{
//
// Channel or (unique-ID,offset). In the case of a recv (local) FIFO vc,
// this will be set to the local node's unique ID and address offset.
//
NIC1394_DESTINATION Destination;
} NIC1394_VC_INFO, *PNIC1394_VC_INFO;
///////////////////////////////////////////////////////////////////////////////////
// INDICATIONS //
///////////////////////////////////////////////////////////////////////////////////
// Bus Reset
// Params: NIC1394_LOCAL_NODE_INFO
///////////////////////////////////////////////////////////////////////////////////
// PACKET FORMATS //
///////////////////////////////////////////////////////////////////////////////////
//
// GASP Header, which prefixes all ip/1394 pkts sent over channels.
// TODO: move this withing NIC1394, because it is not exposed to protocols.
//
typedef struct _NIC1394_GASP_HEADER
{
USHORT source_ID;
USHORT specifier_ID_hi;
UCHAR specifier_ID_lo;
UCHAR version[3];
} NIC1394_GASP_HEADER;
//
// Unfragmented encapsulation header.
//
typedef struct _NIC1394_ENCAPSULATION_HEADER
{
// The Reserved field must be set to 0.
//
USHORT Reserved;
// The EtherType field is set to the byte-swapped version of one of the
// constants defined immediately below.
//
USHORT EtherType;
// Ethertypes in machine byte order. These values need to be byteswapped
// before they are sent on the wire.
//
#define NIC1394_ETHERTYPE_IP 0x800
#define NIC1394_ETHERTYPE_ARP 0x806
#define NIC1394_ETHERTYPE_MCAP 0x8861
} NIC1394_ENCAPSULATION_HEADER, *PNIC1394_ENCAPSULATION_HEADER;
//
// TODO: get rid of NIC1394_ENCAPSULATION_HEADER
//
typedef
NIC1394_ENCAPSULATION_HEADER
NIC1394_UNFRAGMENTED_HEADER, *PNIC1394_UNFRAGMENTED_HEADER;
//
// FRAGMENTED PACKET FORMATS
//
// TODO: move these to inside NIC1394, because they are only
// used within NIC1394.
//
//
// Fragmented Encapsulation header: first fragment
//
typedef struct _NIC1394_FIRST_FRAGMENT_HEADER
{
// Contains the 2-bit "lf" field and the 12-bit "buffer_size" field.
// Use the macros immediately below to extract the above fields from
// the lfbufsz. This field needs to be byteswapped before it is sent out
// on the wire.
//
USHORT lfbufsz;
#define NIC1394_LF_FROM_LFBUFSZ(_lfbufsz) \
((_lfbufz) >> 14)
#define NIC1394_BUFFER_SIZE_FROM_LFBUFSZ(_lfbufsz) \
((_lfbufz) & 0xfff)
#define NIC1394_MAX_FRAGMENT_BUFFER_SIZE 0xfff
//
// specifies what the packet is - an IPV4, ARP, or MCAP packet
//
USHORT EtherType;
// Opaque datagram label. There is no need to byteswap this field before it
// is sent out on the wire.
//
USHORT dgl;
// Must be set to 0
//
USHORT reserved;
} NIC1394_FIRST_FRAGMENT_HEADER, *PNIC1394_FIRST_FRAGMENT_HEADER;
//
// Fragmented Encapsulation header: second and subsequent fragments
//
typedef struct _NIC1394_FRAGMENT_HEADER
{
#if OBSOLETE
ULONG lf:2; // Bits 0-1
ULONG rsv0:2; // Bits 2-3
ULONG buffer_size:12; // Bits 4-15
ULONG rsv1:4; // Bits 16-19
ULONG fragment_offset:12; // Bits 20-31
ULONG dgl:16; // Bits 0-15
ULONG reserved:16; // Bits 16-32
#endif // OBSOLETE
// Contains the 2-bit "lf" field and the 12-bit "buffer_size" field.
// The format is the same as NIC1394_FIRST_FRAGMENT_HEADER.lfbufsz.
//
USHORT lfbufsz;
// Opaque datagram label. There is no need to byteswap this field before it
// is setn out on the wire.
//
USHORT dgl;
// Fragment offset. Must be less than or equal to NIC1394_MAX_FRAGMENT_OFFSET.
// This field needs to be byteswapped before it is sent out on the wire.
//
USHORT fragment_offset;
#define NIC1394_MAX_FRAGMENT_OFFSET 0xfff
} NIC1394_FRAGMENT_HEADER, *PNIC1394_FRAGMENT_HEADER;
#define OID_1394_ISSUE_BUS_RESET 0x0C010201
#endif // _NIC1394_H_