Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

420 lines
11 KiB

/* Copyright (c) 1993, Microsoft Corporation, all rights reserved
**
** raschap.h
** Remote Access PPP Challenge Handshake Authentication Protocol
**
** 11/05/93 Steve Cobb
*/
#ifndef _RASCHAP_H_
#define _RASCHAP_H_
#include "md5.h"
#include <ntsamp.h>
#define TRACE_RASCHAP (0x00010000|TRACE_USE_MASK|TRACE_USE_MSEC|TRACE_USE_DATE)
#define TRACE(a) TracePrintfExA(g_dwTraceIdChap,TRACE_RASCHAP,a )
#define TRACE1(a,b) TracePrintfExA(g_dwTraceIdChap,TRACE_RASCHAP,a,b )
#define TRACE2(a,b,c) TracePrintfExA(g_dwTraceIdChap,TRACE_RASCHAP,a,b,c )
#define TRACE3(a,b,c,d) TracePrintfExA(g_dwTraceIdChap,TRACE_RASCHAP,a,b,c,d )
#define DUMPW(X,Y) TraceDumpExA(g_dwTraceIdChap,1,(LPBYTE)X,Y,4,1,NULL)
#define DUMPB(X,Y) TraceDumpExA(g_dwTraceIdChap,1,(LPBYTE)X,Y,1,1,NULL)
//General macros
#define GEN_RAND_ENCODE_SEED ((CHAR) ( 1 + rand() % 250 ))
/* CHAP packet codes from CHAP spec except ChangePw.
*/
#define CHAPCODE_Challenge 1
#define CHAPCODE_Response 2
#define CHAPCODE_Success 3
#define CHAPCODE_Failure 4
#define CHAPCODE_ChangePw1 5
#define CHAPCODE_ChangePw2 6
#define CHAPCODE_ChangePw3 7
#define MAXCHAPCODE 7
/* Returned by receive buffer parsing routines that discover the packet is
** corrupt, usually because the length fields don't make sense.
*/
#define ERRORBADPACKET (DWORD )-1
/* Maximum challenge and response lengths.
*/
#define MAXCHALLENGELEN 255
#define MSRESPONSELEN (LM_RESPONSE_LENGTH + NT_RESPONSE_LENGTH + 1)
#define MD5RESPONSELEN MD5_LEN
#define MAXRESPONSELEN max( MSRESPONSELEN, MD5RESPONSELEN )
#define MAXINFOLEN 1500
/* Defines states within the CHAP protocol.
*/
#define CHAPSTATE enum tagCHAPSTATE
CHAPSTATE
{
CS_Initial,
CS_WaitForChallenge,
CS_ChallengeSent,
CS_ResponseSent,
CS_Retry,
CS_ChangePw,
CS_ChangePw1,
CS_ChangePw2,
CS_ChangePw1Sent,
CS_ChangePw2Sent,
CS_WaitForAuthenticationToComplete1,
CS_WaitForAuthenticationToComplete2,
CS_Done
};
/* Defines the change password version 1 (NT 3.5) response data buffer.
*/
#define CHANGEPW1 struct tagCHANGEPW1
CHANGEPW1
{
BYTE abEncryptedLmOwfOldPw[ ENCRYPTED_LM_OWF_PASSWORD_LENGTH ];
BYTE abEncryptedLmOwfNewPw[ ENCRYPTED_LM_OWF_PASSWORD_LENGTH ];
BYTE abEncryptedNtOwfOldPw[ ENCRYPTED_NT_OWF_PASSWORD_LENGTH ];
BYTE abEncryptedNtOwfNewPw[ ENCRYPTED_NT_OWF_PASSWORD_LENGTH ];
BYTE abPasswordLength[ 2 ];
BYTE abFlags[ 2 ];
};
/* CHANGEPW1.abFlags bit definitions.
*/
#define CPW1F_UseNtResponse 0x00000001
/* Define the change password version 2 (NT 3.51) response data buffer.
*/
#define CHANGEPW2 struct tagCHANGEPW2
CHANGEPW2
{
BYTE abNewEncryptedWithOldNtOwf[ sizeof(SAMPR_ENCRYPTED_USER_PASSWORD) ];
BYTE abOldNtOwfEncryptedWithNewNtOwf[ ENCRYPTED_NT_OWF_PASSWORD_LENGTH ];
BYTE abNewEncryptedWithOldLmOwf[ sizeof(SAMPR_ENCRYPTED_USER_PASSWORD) ];
BYTE abOldLmOwfEncryptedWithNewNtOwf[ ENCRYPTED_NT_OWF_PASSWORD_LENGTH ];
BYTE abLmResponse[ LM_RESPONSE_LENGTH ];
BYTE abNtResponse[ NT_RESPONSE_LENGTH ];
BYTE abFlags[ 2 ];
};
/* CHANGEPW2.abFlags bit definitions.
*/
#define CPW2F_UseNtResponse 0x00000001
#define CPW2F_LmPasswordPresent 0x00000002
/* Define the change password for new MS-CHAP
*/
#define CHANGEPW3 struct tagCHANGEPW3
CHANGEPW3
{
BYTE abEncryptedPassword[ 516 ];
BYTE abEncryptedHash[ 16 ];
BYTE abPeerChallenge[ 24 ];
BYTE abNTResponse[ 24 ];
BYTE abFlags[ 2 ];
};
/* Union for storage effieciency (never need both formats at same time).
*/
#define CHANGEPW union tagCHANGEPW
CHANGEPW
{
/* This dummy field is included so the MIPS compiler will align the
** structure on a DWORD boundary. Normally, MIPS does not force alignment
** if the structure contains only BYTEs or BYTE arrays. This protects us
** from alignment faults should SAM or LSA interpret the byte arrays as
** containing some necessarily aligned type, though currently they do not.
*/
DWORD dwAlign;
CHANGEPW1 v1;
CHANGEPW2 v2;
CHANGEPW3 v3;
};
/* Defines the WorkBuf stored for us by the PPP engine.
*/
#define CHAPWB struct tagCHAPWB
CHAPWB
{
/* CHAP encryption method negotiated (MD5 or Microsoft extended). Note
** that server does not support MD5.
*/
BYTE bAlgorithm;
/* True if role is server, false if client.
*/
BOOL fServer;
/* The port handle on which the protocol is active.
*/
HPORT hport;
/* Number of authentication attempts left before we shut down. (Microsoft
** extended CHAP only)
*/
DWORD dwTriesLeft;
/* Client's credentials.
*/
CHAR szUserName[ UNLEN + DNLEN + 2 ];
CHAR szOldPassword[ PWLEN + 1 ];
CHAR szPassword[ PWLEN + 1 ];
CHAR szDomain[ DNLEN + 1 ];
/* The LUID is a logon ID required by LSA to determine the response. It
** must be determined in calling app's context and is therefore passed
** down. (client only)
*/
LUID Luid;
/* The challenge sent or received in the Challenge Packet and the length
** in bytes of same. Note that LUID above keeps this DWORD aligned.
*/
BYTE abChallenge[ MAXCHALLENGELEN ];
BYTE cbChallenge;
BYTE abComputedChallenge[ MAXCHALLENGELEN ];
/* Indicates whether a new challenge was provided in the last Failure
** packet. (client only)
*/
BOOL fNewChallengeProvided;
/* The response sent or received in the Response packet and the length in
** bytes of same. Note the BOOL above keeps this DWORD aligned.
*/
BYTE abResponse[ MAXRESPONSELEN ];
BYTE cbResponse;
/* The change password response sent or received in the ChangePw or
** ChangePw2 packets.
*/
CHANGEPW changepw;
/* The LM and user session keys retrieved when credentials are successfully
** authenticated.
*/
LM_SESSION_KEY keyLm;
USER_SESSION_KEY keyUser;
/* This flag indicates that the session key has been calculated
** from the password or retrieved from LSA.
*/
BOOL fSessionKeysObtained;
/* On the client, this contains the pointer to the MPPE keys. On the server
** this field is not used.
*/
RAS_AUTH_ATTRIBUTE * pMPPEKeys;
/* The current state in the CHAP protocol.
*/
CHAPSTATE state;
/* Sequencing ID expected on next packet received on this port and the
** value to send on the next outgoing packet.
*/
BYTE bIdExpected;
BYTE bIdToSend;
/* The final result, used to duplicate the original response in subsequent
** response packets. This is per CHAP spec to cover lost Success/Failure
** case without allowing malicious client to discover alternative
** identities under the covers during a connection. (applies to server
** only)
*/
PPPAP_RESULT result;
HPORT hPort;
DWORD dwInitialPacketId;
DWORD fConfigInfo;
RAS_AUTH_ATTRIBUTE * pAttributesFromAuthenticator;
//
// Used to send authentication request to backend server
//
RAS_AUTH_ATTRIBUTE * pUserAttributes;
CHAR chSeed; //Seed for encoding password.
};
/* Prototypes.
*/
DWORD
ChapInit(
IN BOOL fInitialize
);
DWORD ChapSMakeMessage( CHAPWB*, PPP_CONFIG*, PPP_CONFIG*, DWORD, PPPAP_RESULT*,
PPPAP_INPUT* );
DWORD
MakeAuthenticationRequestAttributes(
IN CHAPWB* pwb,
IN BOOL fMSChap,
IN BYTE bAlgorithm,
IN CHAR* szUserName,
IN BYTE* pbChallenge,
IN DWORD cbChallenge,
IN BYTE* pbResponse,
IN DWORD cbResponse,
IN BYTE bId
);
DWORD
GetErrorCodeFromAttributes(
IN CHAPWB* pwb
);
DWORD
LoadChapHelperFunctions(
VOID
);
DWORD ChapCMakeMessage( CHAPWB*, PPP_CONFIG*, PPP_CONFIG*, DWORD, PPPAP_RESULT*,
PPPAP_INPUT* );
DWORD ChapBegin( VOID**, VOID* );
DWORD ChapEnd( VOID* );
DWORD ChapMakeMessage( VOID*, PPP_CONFIG*, PPP_CONFIG*, DWORD, PPPAP_RESULT*,
PPPAP_INPUT* );
DWORD GetChallengeFromChallenge( CHAPWB*, PPP_CONFIG* );
DWORD MakeChangePw1Message( CHAPWB*, PPP_CONFIG*, DWORD );
DWORD MakeChangePw2Message( CHAPWB*, PPP_CONFIG*, DWORD );
DWORD MakeChangePw3Message( CHAPWB*, PPP_CONFIG*, DWORD, BOOL );
DWORD GetCredentialsFromResponse( PPP_CONFIG*, BYTE, CHAR*, BYTE* );
DWORD GetInfoFromChangePw1( PPP_CONFIG*, CHANGEPW1* );
DWORD GetInfoFromChangePw2( PPP_CONFIG*, CHANGEPW2*, BYTE* );
DWORD GetInfoFromChangePw3( PPP_CONFIG*, CHANGEPW3*, BYTE* );
VOID GetInfoFromFailure( CHAPWB*, PPP_CONFIG*, DWORD*, BOOL*, DWORD* );
BYTE HexCharValue( CHAR );
DWORD MakeChallengeMessage( CHAPWB*, PPP_CONFIG*, DWORD );
DWORD MakeResponseMessage( CHAPWB*, PPP_CONFIG*, DWORD, BOOL );
VOID ChapMakeResultMessage( CHAPWB*, DWORD, BOOL, PPP_CONFIG*, DWORD );
DWORD StoreCredentials( CHAPWB*, PPPAP_INPUT* );
DWORD
ChapChangeNotification(
VOID
);
DWORD
GetChallenge(
OUT PBYTE pChallenge
);
VOID
EndLSA(
VOID
);
DWORD
InitLSA(
VOID
);
DWORD
MakeChangePasswordV1RequestAttributes(
IN CHAPWB* pwb,
IN BYTE bId,
IN PCHAR pchIdentity,
IN PBYTE Challenge,
IN PENCRYPTED_LM_OWF_PASSWORD pEncryptedLmOwfOldPassword,
IN PENCRYPTED_LM_OWF_PASSWORD pEncryptedLmOwfNewPassword,
IN PENCRYPTED_NT_OWF_PASSWORD pEncryptedNtOwfOldPassword,
IN PENCRYPTED_NT_OWF_PASSWORD pEncryptedNtOwfNewPassword,
IN WORD LenPassword,
IN WORD wFlags,
IN DWORD cbChallenge,
IN BYTE * pbChallenge
);
DWORD
MakeChangePasswordV2RequestAttributes(
IN CHAPWB* pwb,
IN BYTE bId,
IN CHAR* pchIdentity,
IN SAMPR_ENCRYPTED_USER_PASSWORD* pNewEncryptedWithOldNtOwf,
IN ENCRYPTED_NT_OWF_PASSWORD* pOldNtOwfEncryptedWithNewNtOwf,
IN SAMPR_ENCRYPTED_USER_PASSWORD* pNewEncryptedWithOldLmOwf,
IN ENCRYPTED_NT_OWF_PASSWORD* pOldLmOwfEncryptedWithNewNtOwf,
IN DWORD cbChallenge,
IN BYTE * pbChallenge,
IN BYTE * pbResponse,
IN WORD wFlags
);
DWORD
MakeChangePasswordV3RequestAttributes(
IN CHAPWB* pwb,
IN BYTE bId,
IN CHAR* pchIdentity,
IN CHANGEPW3* pchangepw3,
IN DWORD cbChallenge,
IN BYTE * pbChallenge
);
DWORD
GetEncryptedPasswordsForChangePassword2(
IN CHAR* pszOldPassword,
IN CHAR* pszNewPassword,
OUT SAMPR_ENCRYPTED_USER_PASSWORD* pNewEncryptedWithOldNtOwf,
OUT ENCRYPTED_NT_OWF_PASSWORD* pOldNtOwfEncryptedWithNewNtOwf,
OUT SAMPR_ENCRYPTED_USER_PASSWORD* pNewEncryptedWithOldLmOwf,
OUT ENCRYPTED_NT_OWF_PASSWORD* pOldLmOwfEncryptedWithNewNtOwf,
OUT BOOLEAN* pfLmPresent
);
/* Globals.
*/
#ifdef RASCHAPGLOBALS
#define GLOBALS
#define EXTERN
#else
#define EXTERN extern
#endif
EXTERN DWORD g_dwTraceIdChap
#ifdef GLOBALS
= INVALID_TRACEID;
#endif
;
EXTERN DWORD g_dwRefCount
#ifdef GLOBALS
= 0;
#endif
;
EXTERN HANDLE g_hLsa
#ifdef GLOBALS
= INVALID_HANDLE_VALUE;
#endif
;
EXTERN
CHAR
szComputerName[CNLEN+1];
#undef EXTERN
#undef GLOBALS
#endif // _RASCHAP_H_