Leaked source code of windows server 2003
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

2490 lines
62 KiB

/*++
Copyright (c) 1996 Microsoft Corporation
Module Name:
usbhub.h
Abstract:
This header define structures and macros for USB Hub driver.
Author:
JohnLee
Environment:
Kernel mode
Revision History:
2-2-96 : created
11-18-96 : jdunn -- added composite device support
--*/
#include <wdmwarn4.h>
#include <usb.h> // usbdi.h has been replaced by usb.h
#include <usbdlib.h>
#include <msosdesc.h> // contains internal definitions for MS OS Desc.
#ifdef USB2
#include "hubbusif.h" // hub service bus interface
#include "usbbusif.h" // usb client service bus interface
#else
#include <hcdi.h>
#include <usbdlibi.h>
#endif
#include <usbioctl.h>
#include <wmidata.h>
#include <enumlog.h>
//enable pageable code
#ifndef PAGE_CODE
#define PAGE_CODE
#endif
#define MULTI_FUNCTION_SUPPORT
#define EARLY_RESOURCE_RELEASE
#define USBH_MAX_FUNCTION_INTERFACES 4
#define BcdNibbleToAscii( byte ) (byte)+ '0'
//
// fail reason codes
//
// "Device Failed Enumeration"
// indicates the device failed some part of the enumeration process
// when this happens we cannot tell enough about the device to load
// the appropriate driver.
#define USBH_FAILREASON_ENUM_FAILED 1
// "Device General Failure"
// this is our 'if it does not fit any other catagory' error
#define USBH_FAILREASON_GEN_DEVICE_FAILURE 2
// "Device Caused Overcurrent"
// if a hub supports per port power switching and the device
// causes an overcurrent condition (over-current is like blowing
// a fuse) the we report this error.
#define USBH_FAILREASON_PORT_OVERCURRENT 3
// "Not Enough Power"
// indicates that the device requested a configuration that requires
// more power than the hub can provide.
#define USBH_FAILREASON_NOT_ENOUGH_POWER 4
// "Hub General failure"
// if the hub starts failing transfer requests the driver will
// disable it and report this error.
#define USBH_FAILREASON_HUB_GENERAL_FAILURE 5
// "Cannot connect more than five hubs"
#define USBH_FAILREASON_MAXHUBS_CONNECTED 6
// "An overcurrent condition has disabled the hub"
// if a device generates overcurrent and the hub implements
// gang power switching the entire hub will be disabled and
// this error reported.
#define USBH_FAILREASON_HUB_OVERCURRENT 7
//
// Struc definitions
//
//
// Work item
//
#define USBH_WKFLAG_REQUEST_RESET 0x00000001
typedef struct _USBH_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
ULONG Flags;
PVOID Context;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
KDPC Dpc;
KTIMER Timer;
UCHAR Data[0];
} USBH_WORK_ITEM, *PUSBH_WORK_ITEM;
typedef struct _USBH_RESET_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort;
PIRP Irp;
} USBH_RESET_WORK_ITEM, *PUSBH_RESET_WORK_ITEM;
typedef struct _USBH_COMP_RESET_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_PARENT *DeviceExtensionParent;
} USBH_COMP_RESET_WORK_ITEM, *PUSBH_COMP_RESET_WORK_ITEM;
typedef struct _USBH_BANDWIDTH_TIMEOUT_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort;
} USBH_BANDWIDTH_TIMEOUT_WORK_ITEM, *PUSBH_BANDWIDTH_TIMEOUT_WORK_ITEM;
typedef struct _USBH_COMP_RESET_TIMEOUT_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_PARENT *DeviceExtensionParent;
} USBH_COMP_RESET_TIMEOUT_WORK_ITEM, *PUSBH_COMP_RESET_TIMEOUT_WORK_ITEM;
typedef struct _USBH_SET_POWER_D0_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
PIRP Irp;
} USBH_SET_POWER_D0_WORK_ITEM, *PUSBH_SET_POWER_D0_WORK_ITEM;
typedef struct _USBH_HUB_ESD_RECOVERY_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
} USBH_HUB_ESD_RECOVERY_WORK_ITEM, *PUSBH_HUB_ESD_RECOVERY_WORK_ITEM;
typedef struct _USBH_HUB_IDLE_POWER_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
NTSTATUS ntStatus;
} USBH_HUB_IDLE_POWER_WORK_ITEM, *PUSBH_HUB_IDLE_POWER_WORK_ITEM;
typedef struct _USBH_PORT_IDLE_POWER_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
PIRP Irp;
} USBH_PORT_IDLE_POWER_WORK_ITEM, *PUSBH_PORT_IDLE_POWER_WORK_ITEM;
typedef struct _USBH_COMPLETE_PORT_IRPS_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
LIST_ENTRY IrpsToComplete;
NTSTATUS ntStatus;
} USBH_COMPLETE_PORT_IRPS_WORK_ITEM, *PUSBH_COMPLETE_PORT_IRPS_WORK_ITEM;
typedef struct _USBH_HUB_ASYNC_POWER_WORK_ITEM {
WORK_QUEUE_ITEM WorkQueueItem;
struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort;
PIRP Irp;
UCHAR MinorFunction;
} USBH_HUB_ASYNC_POWER_WORK_ITEM, *PUSBH_HUB_ASYNC_POWER_WORK_ITEM;
typedef struct _HUB_TIMEOUT_CONTEXT {
PIRP Irp;
KEVENT Event;
KDPC TimeoutDpc;
KTIMER TimeoutTimer;
KSPIN_LOCK TimeoutSpin;
BOOLEAN Complete;
} HUB_TIMEOUT_CONTEXT, *PHUB_TIMEOUT_CONTEXT;
typedef struct _PORT_TIMEOUT_CONTEXT {
KDPC TimeoutDpc;
KTIMER TimeoutTimer;
struct _DEVICE_EXTENSION_PORT *DeviceExtensionPort;
BOOLEAN CancelFlag;
} PORT_TIMEOUT_CONTEXT, *PPORT_TIMEOUT_CONTEXT;
typedef struct _COMP_RESET_TIMEOUT_CONTEXT {
KDPC TimeoutDpc;
KTIMER TimeoutTimer;
struct _DEVICE_EXTENSION_PARENT *DeviceExtensionParent;
BOOLEAN CancelFlag;
} COMP_RESET_TIMEOUT_CONTEXT, *PCOMP_RESET_TIMEOUT_CONTEXT;
typedef struct _HUB_ESD_RECOVERY_CONTEXT {
KDPC TimeoutDpc;
KTIMER TimeoutTimer;
struct _DEVICE_EXTENSION_HUB *DeviceExtensionHub;
} HUB_ESD_RECOVERY_CONTEXT, *PHUB_ESD_RECOVERY_CONTEXT;
typedef struct _USB_DEVICE_UI_FIRMWARE_REVISION
{
USHORT Length;
WCHAR FirmwareRevisionString[1];
} USB_DEVICE_UI_FIRMWARE_REVISION, *PUSB_DEVICE_UI_FIRMWARE_REVISION;
typedef struct _HUB_STATE {
USHORT HubStatus;
USHORT HubChange;
} HUB_STATE, *PHUB_STATE;
typedef struct _PORT_STATE {
USHORT PortStatus;
USHORT PortChange;
} PORT_STATE, *PPORT_STATE;
//
// Hub and Port status defined below also apply to StatusChnage bits
//
#define HUB_STATUS_LOCAL_POWER 0x01
#define HUB_STATUS_OVER_CURRENT 0x02
#define PORT_STATUS_CONNECT 0x001
#define PORT_STATUS_ENABLE 0x002
#define PORT_STATUS_SUSPEND 0x004
#define PORT_STATUS_OVER_CURRENT 0x008
#define PORT_STATUS_RESET 0x010
#define PORT_STATUS_POWER 0x100
#define PORT_STATUS_LOW_SPEED 0x200
#define PORT_STATUS_HIGH_SPEED 0x400
//
// Port data to describe relevant info about a port
//
// values for PortFlags
// #define PORTFLAG_ 0x00000001
typedef struct _PORT_DATA {
PORT_STATE PortState; // the status & change bit mask of the port
PDEVICE_OBJECT DeviceObject; // the PDO
USB_CONNECTION_STATUS ConnectionStatus;
// extended port attributes as defined in USB.H
ULONG PortAttributes;
// revised port data structure
ULONG PortFlags;
} PORT_DATA, *PPORT_DATA;
//
// Define the various device type values. Note that values used by Microsoft
// Corporation are in the range 0-32767, and 32768-65535 are reserved for use
// by customers.
//
#define FILE_DEVICE_USB_HUB 0x00008600
#define USBH_MAX_ENUMERATION_ATTEMPTS 3
//
// Common fields for Pdo and Fdo extensions
//
#define EXTENSION_TYPE_PORT 0x54524f50 // "PORT"
#define EXTENSION_TYPE_HUB 0x20425548 // "HUB "
#define EXTENSION_TYPE_PARENT 0x50525400 // "PRT "
#define EXTENSION_TYPE_FUNCTION 0xfefefeff // ""
typedef struct _USBH_POWER_WORKER {
PIRP Irp;
WORK_QUEUE_ITEM WorkQueueItem;
} USBH_POWER_WORKER, *PUSBH_POWER_WORKER;
typedef struct _DEVICE_EXTENSION_HEADER {
ULONG ExtensionType;
} DEVICE_EXTENSION_HEADER, *PDEVICE_EXTENSION_HEADER;
typedef struct _DEVICE_EXTENSION_COMMON {
PDEVICE_OBJECT FunctionalDeviceObject; // points back to owner device object
PDEVICE_OBJECT PhysicalDeviceObject; // the PDO for this device
PDEVICE_OBJECT TopOfStackDeviceObject; // to of stack passed to adddevice
} DEVICE_EXTENSION_COMMON, *PDEVICE_EXTENSION_COMMON;
// common to FDO for hub and generic parent
typedef struct _DEVICE_EXTENSION_FDO {
DEVICE_EXTENSION_HEADER;
DEVICE_EXTENSION_COMMON;
KEVENT PnpStartEvent;
PIRP PowerIrp;
#ifdef WMI_SUPPORT
WMILIB_CONTEXT WmiLibInfo;
#endif /* WMI_SUPPORT */
} DEVICE_EXTENSION_FDO, *PDEVICE_EXTENSION_FDO;
//
// Device_Extension for HUB
//
typedef struct _DEVICE_EXTENSION_HUB {
//
// *** NOTE the first four fields must match
// DEVICE_EXTENSION_FDO
//
DEVICE_EXTENSION_HEADER;
DEVICE_EXTENSION_COMMON;
KEVENT PnpStartEvent;
PIRP PowerIrp;
#ifdef WMI_SUPPORT
WMILIB_CONTEXT WmiLibInfo;
#endif /* WMI_SUPPORT */
//
// Pdo created by HCD for the root hub
//
PDEVICE_OBJECT RootHubPdo;
//
// top of the host controller stack
// typically this is the FDO for the HCD
//
PDEVICE_OBJECT TopOfHcdStackDeviceObject;
ULONG HubFlags;
//
// we use the hub mutex to serialize access to the
// hub ports between ioctls and pnp events
//
ULONG PendingRequestCount;
ULONG ErrorCount;
HUB_STATE HubState;
PIRP Irp;
PIRP PendingWakeIrp;
LONG NumberPortWakeIrps;
PUCHAR TransferBuffer;
ULONG TransferBufferLength;
PKEVENT Event;
PUSB_HUB_DESCRIPTOR HubDescriptor;
PPORT_DATA PortData;
USBD_CONFIGURATION_HANDLE Configuration;
PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor;
DEVICE_POWER_STATE DeviceState[PowerSystemMaximum];
SYSTEM_POWER_STATE SystemWake;
DEVICE_POWER_STATE DeviceWake;
DEVICE_POWER_STATE CurrentPowerState;
LONG MaximumPowerPerPort;
PORT_STATE PortStateBuffer;
LONG ResetPortNumber;
PUSBH_WORK_ITEM WorkItemToQueue;
KEVENT AbortEvent;
KEVENT PendingRequestEvent;
//
// we use the hub mutex to serialize access to the
// hub ports between ioctls and pnp events
//
KSEMAPHORE HubMutex;
KSEMAPHORE HubPortResetMutex;
KSEMAPHORE ResetDeviceMutex;
USB_DEVICE_DESCRIPTOR DeviceDescriptor;
USBD_PIPE_INFORMATION PipeInformation;
URB Urb;
LONG InESDRecovery;
#ifdef USB2
USB_BUS_INTERFACE_HUB_V5 BusIf;
USB_BUS_INTERFACE_USBDI_V2 UsbdiBusIf;
#endif
PIRP PendingIdleIrp;
USB_IDLE_CALLBACK_INFO IdleCallbackInfo;
KEVENT SubmitIdleEvent;
LONG ChangeIndicationWorkitemPending;
LONG WaitWakeIrpCancelFlag;
LONG IdleIrpCancelFlag;
KEVENT CWKEvent;
// Only used for the Root Hub!
SYSTEM_POWER_STATE CurrentSystemPowerState;
KSPIN_LOCK CheckIdleSpinLock;
// revised extension
// deleted Pdo list, we use this list to handle
// async deletion of PDOs. Basically these are
// PDO we have not reported gone to PnP yet.
LIST_ENTRY DeletePdoList;
} DEVICE_EXTENSION_HUB, *PDEVICE_EXTENSION_HUB;
#define HUBFLAG_NEED_CLEANUP 0x00000001
#define HUBFLAG_ENABLED_FOR_WAKEUP 0x00000002
#define HUBFLAG_DEVICE_STOPPING 0x00000004
#define HUBFLAG_HUB_FAILURE 0x00000008
#define HUBFLAG_SUPPORT_WAKEUP 0x00000010
#define HUBFLAG_HUB_STOPPED 0x00000020
#define HUBFLAG_HUB_BUSY 0x00000040
#define HUBFLAG_PENDING_WAKE_IRP 0x00000080
#define HUBFLAG_PENDING_PORT_RESET 0x00000100
#define HUBFLAG_HUB_HAS_LOST_BRAINS 0x00000200
#define HUBFLAG_SET_D0_PENDING 0x00000400
#define HUBFLAG_DEVICE_LOW_POWER 0x00000800
#define HUBFLAG_PENDING_IDLE_IRP 0x00001000
#define HUBFLAG_CHILD_DELETES_PENDING 0x00002000
#define HUBFLAG_HUB_GONE 0x00004000
#define HUBFLAG_USB20_HUB 0x00008000
#define HUBFLAG_NEED_IDLE_CHECK 0x00010000
#define HUBFLAG_WW_SET_D0_PENDING 0x00020000
#define HUBFLAG_USB20_MULTI_TT 0x00040000
#define HUBFLAG_POST_ESD_ENUM_PENDING 0x00080000
#define HUBFLAG_OK_TO_ENUMERATE 0x00100000
#define HUBFLAG_IN_IDLE_CHECK 0x00200000
#define HUBFLAG_HIBER 0x00400000
typedef struct _DEVICE_EXTENSION_PARENT {
DEVICE_EXTENSION_HEADER;
DEVICE_EXTENSION_COMMON;
KEVENT PnpStartEvent;
PIRP PowerIrp;
#ifdef WMI_SUPPORT
WMILIB_CONTEXT WmiLibInfo;
#endif /* WMI_SUPPORT */
PIRP PendingWakeIrp;
LONG NumberFunctionWakeIrps;
ULONG FunctionCount;
PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor;
SINGLE_LIST_ENTRY FunctionList;
DEVICE_POWER_STATE DeviceState[PowerSystemMaximum];
SYSTEM_POWER_STATE SystemWake;
DEVICE_POWER_STATE DeviceWake;
DEVICE_POWER_STATE CurrentPowerState;
ULONG ParentFlags;
BOOLEAN NeedCleanup;
UCHAR CurrentConfig;
UCHAR Reserved[2];
USB_DEVICE_DESCRIPTOR DeviceDescriptor;
PCOMP_RESET_TIMEOUT_CONTEXT CompResetTimeoutContext;
KSEMAPHORE ParentMutex;
KSPIN_LOCK ParentSpinLock;
} DEVICE_EXTENSION_PARENT, *PDEVICE_EXTENSION_PARENT;
typedef struct _FUNCTION_INTERFACE {
PUSBD_INTERFACE_INFORMATION InterfaceInformation;
PUSB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
ULONG InterfaceDescriptorLength;
} FUNCTION_INTERFACE, *PFUNCTION_INTERFACE;
typedef struct _DEVICE_EXTENSION_FUNCTION {
DEVICE_EXTENSION_HEADER;
PDEVICE_EXTENSION_PARENT DeviceExtensionParent;
PDEVICE_OBJECT FunctionPhysicalDeviceObject;
PIRP WaitWakeIrp;
PIRP ResetIrp;
ULONG InterfaceCount;
ULONG FunctionPdoFlags;
SINGLE_LIST_ENTRY ListEntry;
USBD_CONFIGURATION_HANDLE ConfigurationHandle;
WCHAR UniqueIdString[4]; // room for three unicode digits plus
// NULL
FUNCTION_INTERFACE FunctionInterfaceList[USBH_MAX_FUNCTION_INTERFACES];
} DEVICE_EXTENSION_FUNCTION, *PDEVICE_EXTENSION_FUNCTION;
//
// Device Extension for Port
//
typedef struct _DEVICE_EXTENSION_PORT {
DEVICE_EXTENSION_HEADER;
PDEVICE_OBJECT PortPhysicalDeviceObject;
PDEVICE_EXTENSION_HUB DeviceExtensionHub;
USHORT PortNumber;
// port you are on on your parent hub.
USHORT SerialNumberBufferLength;
PVOID DeviceData;
DEVICE_POWER_STATE DeviceState;
PIRP WaitWakeIrp;
// these flags describe the state of the PDO and
// the capabilities of the device connected
ULONG PortPdoFlags;
ULONG DeviceHackFlags;
PWCHAR SerialNumberBuffer;
WCHAR UniqueIdString[4];
// room for three unicode digits plus NULL
UNICODE_STRING SymbolicLinkName;
USB_DEVICE_DESCRIPTOR DeviceDescriptor;
USB_DEVICE_DESCRIPTOR OldDeviceDescriptor;
USB_CONFIGURATION_DESCRIPTOR ConfigDescriptor;
USB_INTERFACE_DESCRIPTOR InterfaceDescriptor;
// information returned through WMI
//
ULONG FailReasonId;
ULONG PowerRequested;
ULONG RequestedBandwidth;
ULONG EnumerationFailReason;
PPORT_TIMEOUT_CONTEXT PortTimeoutContext;
UCHAR FeatureDescVendorCode;
PIRP IdleNotificationIrp;
KSPIN_LOCK PortSpinLock;
DEVICE_CAPABILITIES DevCaps;
PDEVICE_EXTENSION_HUB HubExtSave;
#ifdef WMI_SUPPORT
WMILIB_CONTEXT WmiLibInfo;
#endif /* WMI_SUPPORT */
// revised extension
// Storage for MS Extended Config Descriptor Compatible IDs
UCHAR CompatibleID[8];
UCHAR SubCompatibleID[8];
ULONG PnPFlags;
LIST_ENTRY DeletePdoLink;
} DEVICE_EXTENSION_PORT, *PDEVICE_EXTENSION_PORT;
// values for PNP flags
// #define PDO_PNPFLAG_
#define PDO_PNPFLAG_DEVICE_PRESENT 0x00000001
typedef struct _SERIAL_NUMBER_ENTRY {
ULONG Vid;
ULONG Pid;
PVOID Pdo;
} SERIAL_NUMBER_ENTRY, *PSERIAL_NUMBER_ENTRY;
typedef struct _SERIAL_NUMBER_TABLE {
ULONG NumEntries;
ULONG MaxEntries;
PSERIAL_NUMBER_ENTRY Entries;
FAST_MUTEX Mutex;
} SERIAL_NUMBER_TABLE, * PSERIAL_NUMBER_TABLE;
//
// values for PortPdoFlags
//
#define PORTPDO_DEVICE_IS_HUB 0x00000001
#define PORTPDO_DEVICE_IS_PARENT 0x00000002
#define PORTPDO_DEVICE_ENUM_ERROR 0x00000004
#define PORTPDO_LOW_SPEED_DEVICE 0x00000008
#define PORTPDO_REMOTE_WAKEUP_SUPPORTED 0x00000010
#define PORTPDO_REMOTE_WAKEUP_ENABLED 0x00000020
#define PORTPDO_DELETED_PDO 0x00000040
// revised
// set when the device for a PDO is removed from bus
// (physically detached from hub)
// PnP may or may not know the device is gone.
#define PORTPDO_DELETE_PENDING 0x00000080
#define PORTPDO_NEED_RESET 0x00000100
#define PORTPDO_STARTED 0x00000200
#define PORTPDO_USB20_DEVICE_IN_LEGACY_HUB 0x00000400
#define PORTPDO_SYM_LINK 0x00000800
#define PORTPDO_DEVICE_FAILED 0x00001000
#define PORTPDO_USB_SUSPEND 0x00002000
#define PORTPDO_OVERCURRENT 0x00004000
#define PORTPDO_DD_REMOVED 0x00008000
#define PORTPDO_NOT_ENOUGH_POWER 0x00010000
// revised not used
//#define PORTPDO_PDO_RETURNED 0x00020000
#define PORTPDO_NO_BANDWIDTH 0x00040000
#define PORTPDO_RESET_PENDING 0x00080000
#define PORTPDO_OS_STRING_DESC_REQUESTED 0x00100000
#define PORTPDO_MS_VENDOR_CODE_VALID 0x00200000
#define PORTPDO_IDLE_NOTIFIED 0x00400000
#define PORTPDO_HIGH_SPEED_DEVICE 0x00800000
#define PORTPDO_NEED_CLEAR_REMOTE_WAKEUP 0x01000000
#define PORTPDO_WMI_REGISTERED 0x02000000
#define PORTPDO_VALID_FOR_PNP_FUNCTION 0x04000000
#define PORTPDO_CYCLED 0x08000000
//
// NOTE: this macro will alway inavlidate the device state but
// never change the current "fail reason"
#define HUB_FAILURE(de) \
{ \
de->HubFlags |= HUBFLAG_HUB_FAILURE; \
USBH_KdPrint((1, "'hub failure, VID %x PID %x line %d file %s\n", \
de->DeviceDescriptor.idVendor, \
de->DeviceDescriptor.idProduct, __LINE__, __FILE__)); \
LOGENTRY(LOG_PNP, "HUB!", de, __LINE__, de->HubFlags); \
}
//#define DEVICE_FAILURE(dep) \
// { \
// dep->PortPdoFlags |= PORTPDO_DEVICE_FAILED; \
// USBH_KdPrint((1, "'device failure, VID %x PID %x line %d file %s\n", \
// dep->DeviceDescriptor.idVendor, \
// dep->DeviceDescriptor.idProduct,\
// __LINE__, __FILE__)); \
// LOGENTRY(LOG_PNP, "DEV!", dep, 0, 0); \
// }
#define IS_ROOT_HUB(de) (de->PhysicalDeviceObject == de->RootHubPdo)
#define USBH_IoInvalidateDeviceRelations(devobj, b) \
{ \
LOGENTRY(LOG_PNP, "HUBr", devobj, 0, 0); \
USBH_KdPrint((1, "'IoInvalidateDeviceRelations %x\n", devobj));\
IoInvalidateDeviceRelations(devobj, b); \
}
//
// Length of buffer for Hub and port status are both 4
//
#define STATUS_HUB_OR_PORT_LENGTH 4
//
// Hub Characterics
//
//
// Powere switch mode
//
#define HUB_CHARS_POWER_SWITCH_MODE_MASK 0x0003
#define HUB_CHARS_POWER_SWITCH_GANGED 0x0000 //00
#define HUB_CHARS_POWER_SWITCH_INDIVIDUAL 0x0001 //01
#define HUB_CHARS_POWER_SWITCH_NONE 0x0002 //1X
#define HUB_IS_GANG_POWER_SWITCHED(hc) \
(((hc) & HUB_CHARS_POWER_SWITCH_MODE_MASK) == HUB_CHARS_POWER_SWITCH_GANGED)
#define HUB_IS_NOT_POWER_SWITCHED(hc) \
(((hc) & HUB_CHARS_POWER_SWITCH_NONE) == HUB_CHARS_POWER_SWITCH_NONE)
#define HUB_IS_PORT_POWER_SWITCHED(hc) \
(((hc) & HUB_CHARS_POWER_SWITCH_MODE_MASK) == HUB_CHARS_POWER_SWITCH_INDIVIDUAL)
BOOLEAN
IsBitSet(
PVOID Bitmap,
ULONG PortNumber
);
#define PORT_ALWAYS_POWER_SWITCHED(hd, p) \
IsBitSet(&(hd)->bRemoveAndPowerMask[((hd)->bNumberOfPorts)/8 + 1], \
(p))
#define PORT_DEVICE_NOT_REMOVABLE(hd, p) \
IsBitSet(&(hd)->bRemoveAndPowerMask[0], \
(p))
//
// Compound Device
//
#define HUB_CHARS_COMPOUND_DEVICE 0x4
//
// Over Current Protection Mode
//
#define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_MASK 0x18
#define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_GLOBAL 0x0
#define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_INDIVIDUAL 0x8
#define HUB_CHARS_OVERCURRENT_PROTECTION_MODE_NONE 0x10
//
// Request codes, defined in Ch11
//
#define REQUEST_GET_STATUS 0
#define REQUEST_CLEAR_FEATURE 1
#define REQUEST_GET_STATE 2
#define REQUEST_SET_FEATURE 3
#define REQUEST_SET_ADDRESS 5
#define REQUEST_GET_DESCRIPTOR 6
#define REQUEST_SET_DESCRIPTOR 7
#define REQUEST_GET_CONFIGURATION 8
#define REQUEST_SET_CONFIGURATION 9
#define REQUEST_GET_INTERFACE 10
#define REQUEST_SET_INTERFACE 11
#define REQUEST_SYNCH_FRAME 12
//
// These request types can be composed.
// But it is just easy to define them.
//
#define REQUEST_TYPE_CLEAR_HUB_FEATURE 0x20
#define REQUEST_TYPE_CLEAR_PORT_FEATURE 0x23
#define REQUEST_TYPE_GET_BUS_STATE 0xa3
#define REQUEST_TYPE_GET_HUB_DESCRIPTOR 0xa0
#define REQUEST_TYPE_GET_HUB_STATUS 0xa0
#define REQUEST_TYPE_GET_PORT_STATUS 0xa3
#define REQUEST_TYPE_SET_HUB_DESCRIPTOR 0x20
#define REQUEST_TYPE_SET_HUB_FEATURE 0x20
#define REQUEST_TYPE_SET_PORT_FEATURE 0x23
//
// Feature selector, defined in Ch11
//
#define FEATURE_C_HUB_LOCAL_POWER 0
#define FEATURE_C_HUB_OVER_CURRENT 1
#define FEATURE_PORT_CONNECT 0
#define FEATURE_PORT_ENABLE 1
#define FEATURE_PORT_SUSPEND 2
#define FEATURE_PORT_OVER_CURRENT 3
#define FEATURE_PORT_RESET 4
#define FEATURE_PORT_POWER 8
#define FEATURE_PORT_LOW_SPEED 9
#define FEATURE_C_PORT_CONNECT 16
#define FEATURE_C_PORT_ENABLE 17
#define FEATURE_C_PORT_SUSPEND 18
#define FEATURE_C_PORT_OVER_CURRENT 19
#define FEATURE_C_PORT_RESET 20
//----------------------------------------------------------------------------------
// Utility Macros
#define UsbhBuildGetDescriptorUrb(\
pUrb, \
pDeviceData, \
bDescriptorType, \
bDescriptorIndex, \
wLanguageId, \
ulTransferLength, \
pTransferBuffer) \
{\
(pUrb)->UrbHeader.UsbdDeviceHandle = pDeviceData;\
(pUrb)->UrbHeader.Length = (USHORT) sizeof (struct _URB_CONTROL_DESCRIPTOR_REQUEST);\
(pUrb)->UrbHeader.Function = URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE;\
(pUrb)->UrbControlDescriptorRequest.DescriptorType = bDescriptorType;\
(pUrb)->UrbControlDescriptorRequest.Index = bDescriptorIndex;\
(pUrb)->UrbControlDescriptorRequest.LanguageId = wLanguageId;\
(pUrb)->UrbControlDescriptorRequest.TransferBufferLength = ulTransferLength;\
(pUrb)->UrbControlDescriptorRequest.TransferBuffer = pTransferBuffer;\
(pUrb)->UrbControlDescriptorRequest.TransferBufferMDL = NULL;\
(pUrb)->UrbControlVendorClassRequest.UrbLink = NULL;\
}
#define UsbhBuildVendorClassUrb(\
pUrb,\
pDeviceData,\
wFunction,\
ulTransferFlags,\
bRequestType,\
bRequest,\
wFeatureSelector,\
wPort,\
ulTransferBufferLength,\
pTransferBuffer)\
{\
(pUrb)->UrbHeader.Length = (USHORT) sizeof( struct _URB_CONTROL_VENDOR_OR_CLASS_REQUEST);\
(pUrb)->UrbHeader.Function = wFunction;\
(pUrb)->UrbHeader.UsbdDeviceHandle = pDeviceData;\
(pUrb)->UrbControlVendorClassRequest.TransferFlags = ulTransferFlags;\
(pUrb)->UrbControlVendorClassRequest.TransferBufferLength = ulTransferBufferLength;\
(pUrb)->UrbControlVendorClassRequest.TransferBuffer = pTransferBuffer;\
(pUrb)->UrbControlVendorClassRequest.TransferBufferMDL = NULL;\
(pUrb)->UrbControlVendorClassRequest.RequestTypeReservedBits = bRequestType;\
(pUrb)->UrbControlVendorClassRequest.Request = bRequest;\
(pUrb)->UrbControlVendorClassRequest.Value = wFeatureSelector;\
(pUrb)->UrbControlVendorClassRequest.Index = wPort;\
(pUrb)->UrbControlVendorClassRequest.UrbLink = NULL;\
}
//----------------------------------------------------------------------------------
//
// string macros. these work with char and wide char strings
//
// Counting the byte count of an ascii string or wide char string
//
#define STRLEN( Length, p )\
{\
int i;\
for ( i=0; (p)[i]; i++ );\
Length = i*sizeof(*p);\
}
//
// copy wide char string
//
#define STRCPY( pDst, pSrc )\
{\
int nLength, i;\
STRLEN( nLength, pSrc );\
nLength /= sizeof( *pSrc );\
for ( i=0; i < nLength; i++ ) pDst[i] = pSrc[i];\
pDst[i] = 0;\
}
//
// concat (wide) char strings
//
#define STRCAT( pFirst, pSecond )\
{\
int j, k;\
int nLength;\
STRLEN( j, pFirst );\
STRLEN( nLength, pSecond );\
j /= sizeof( *pFirst );\
nLength /= sizeof( *pSecond);\
for ( k=0; k < nLength; k++, j++ ) pFirst[j] = pSecond[k];\
pFirst[j] = 0;\
}
//
// append a (wide) char,
//
#define APPEND( pString, ch )\
{\
int nLength;\
STRLEN( nLength, pString );\
nLength /= sizeof( *pString );\
pString[nLength] = ch;\
pString[nLength+1] = 0;\
}
//----------------------------------------------------------------------------------
//
// Debug Macros
//
#ifdef NTKERN
// Win95 only
#define DBGBREAK() _asm {int 3}
#else
#define DBGBREAK() DbgBreakPoint()
#endif
#define USBHUB_HEAP_TAG 0x42554855 //"UHUB"
#define USBHUB_FREE_TAG 0x62756875 //"uhub"
#if DBG
PVOID
UsbhGetHeap(
IN POOL_TYPE PoolType,
IN ULONG NumberOfBytes,
IN ULONG Signature,
IN PLONG TotalAllocatedHeapSpace
);
VOID
UsbhRetHeap(
IN PVOID P,
IN ULONG Signature,
IN PLONG TotalAllocatedHeapSpace
);
// TEST_TRAP() is a code coverage trap these should be removed
// if you are able to 'g' past the OK
//
// KdTrap() breaks in the debugger on the debug build
// these indicate bugs in client drivers, kernel apis or fatal error
// conditions that should be debugged. also used to mark
// code for features not implemented yet.
//
// KdBreak() breaks in the debugger when in MAX_DEBUG mode
// ie debug trace info is turned on, these are intended to help
// debug drivers devices and special conditions on the
// bus.
ULONG
_cdecl
USBH_KdPrintX(
ULONG l,
PCH Format,
...
);
#define UsbhExAllocatePool(pt, l) UsbhGetHeap(pt, l, USBHUB_HEAP_TAG, \
&UsbhHeapCount)
#define UsbhExFreePool(p) UsbhRetHeap(p, USBHUB_HEAP_TAG, &UsbhHeapCount)
#define DBG_ONLY(s) s
#define USBH_KdPrint(_s_) USBH_KdPrintX _s_
//#define USBH_KdPrintAlways(s) { DbgPrint( "USBH: "); \
// DbgPrint s; \
// }
#ifdef MAX_DEBUG
#define USBH_KdBreak(s) if (USBH_Debug_Trace_Level) { \
DbgPrint( "USBH: "); \
DbgPrint s; \
} \
DBGBREAK();
#else
#define USBH_KdBreak(s)
#endif /* MAX_DEBUG */
#define USBH_KdTrap(s) { DbgPrint( "USBH: ");\
DbgPrint s; \
DBGBREAK(); }
#define TEST_TRAP() { DbgPrint( "USBH: Code coverage trap %s line: %d\n", __FILE__, __LINE__);\
DBGBREAK();}
#else // not debug
#define UsbhExAllocatePool(pt, l) ExAllocatePoolWithTag(pt, l, USBHUB_HEAP_TAG)
#define UsbhExFreePool(p) ExFreePool(p)
#define DBG_ONLY(s)
#define USBH_KdPrint(_s_)
#define USBH_KdBreak(s)
#define USBH_KdTrap(s)
//#define USBH_KdPrintAlways(s)
#define TEST_TRAP();
#endif
#ifdef HOST_GLOBALS
#define DECLARE(type, var, init_value ) type var = init_value;
#define DECLARE_NO_INIT(type, var) type var;
#else
#define DECLARE(type, var, init_value ) extern type var;
#define DECLARE_NO_INIT(type, var ) extern type var;
#endif
//----------------------------------------------------------------------------------
//
// Global Variables
//
//
// Remember our driver object
//
DECLARE( PDRIVER_OBJECT, UsbhDriverObject, NULL)
extern PWCHAR GenericUSBDeviceString;
#if DBG
//
// keep track of heap allocations
//
DECLARE( ULONG, UsbhHeapCount, 0)
#define PNP_TEST_FAIL_ENUM 0x00000001
#define PNP_TEST_FAIL_DEV_POWER 0x00000002
#define PNP_TEST_FAIL_HUB_COUNT 0x00000004
#define PNP_TEST_FAIL_HUB 0x00000008
#define PNP_TEST_FAIL_PORT_RESET 0x00000010
#define PNP_TEST_FAIL_WAKE_REQUEST 0x00000020
#define PNP_TEST_FAIL_RESTORE 0x00000040
DECLARE( ULONG, UsbhPnpTest, 0)
#endif
//
// The following strings are used to build HardwareId etc.
//
// USB string
//
DECLARE( PWCHAR, pwchUsbSlash, L"USB\\");
// Vendor ID string
//
DECLARE( PWCHAR, pwchVid, L"Vid_");
//
// Product Id string
//
DECLARE( PWCHAR, pwchPid, L"Pid_");
//
// Revision string
//
DECLARE( PWCHAR, pwchRev, L"Rev_");
//
// Device Class string
//
DECLARE( PWCHAR, pwchDevClass, L"DevClass_");
//
// Class string
//
DECLARE( PWCHAR, pwchClass, L"Class_");
//
// Composite
//
DECLARE( PWCHAR, pwchComposite, L"USB\\COMPOSITE");
//
// SubClass string
//
DECLARE( PWCHAR, pwchSubClass, L"SubClass_");
//
// MultiInterface string
//
DECLARE( PWCHAR, pwchMultiInterface, L"USB\\MI");
//
// Device Protocol string
//
DECLARE( PWCHAR, pwchProt, L"Prot_");
DECLARE_NO_INIT( UNICODE_STRING, UsbhRegistryPath);
//
// To set the verbose level of the debug print
//
#ifdef MAX_DEBUG
#define DEBUG3
#endif /* MAX_DEBUG */
#ifdef DEBUG3
DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 3))
#else
#ifdef DEBUG2
DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 2))
#else
#ifdef DEBUG1
DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 1))
#else
DBG_ONLY( DECLARE( ULONG, USBH_Debug_Trace_Level, 0))
#endif // DEBUG1
#endif // DEBUG2
#endif // DEBUG3
#define USBH_DEBUGFLAG_BREAK_PDO_START 0x00000001
DBG_ONLY( DECLARE( ULONG, USBH_Debug_Flags, 0))
#if DBG
VOID
UsbhWarning(
PDEVICE_EXTENSION_PORT DeviceExtensionPort,
PUCHAR Message,
BOOLEAN DebugBreak
);
#define ASSERT_HUB(de) USBH_ASSERT(EXTENSION_TYPE_HUB == ((PDEVICE_EXTENSION_HUB) de)->ExtensionType)
#define ASSERT_PORT(de) USBH_ASSERT(EXTENSION_TYPE_PORT == ((PDEVICE_EXTENSION_PORT) de)->ExtensionType)
#define ASSERT_FUNCTION(de) USBH_ASSERT(EXTENSION_TYPE_FUNCTION == ((PDEVICE_EXTENSION_FUNCTION) de)->ExtensionType)
#else
#define UsbhWarning(x, y, z)
#define ASSERT_HUB(de)
#define ASSERT_PORT(de)
#define ASSERT_FUNCTION(de)
#endif
#define TO_USB_DEVICE 0
#define TO_USB_INTERFACE 1
#define TO_USB_ENDPOINT 2
//
// maximum number of times we will attempt to reset
// the hub before giving up
//
#define USBH_MAX_ERRORS 3
//----------------------------------------------------------------------------------
//
// Function Prototypes
//
#ifdef USB2
VOID
USBH_InitializeUSB2Hub(
PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
// use version 5
#define PUSB_HUB_BUS_INTERFACE PUSB_BUS_INTERFACE_HUB_V5
#define HUB_BUSIF_VERSION USB_BUSIF_HUB_VERSION_5
NTSTATUS
USBHUB_GetBusInterface(
IN PDEVICE_OBJECT RootHubPdo,
IN PUSB_HUB_BUS_INTERFACE BusInterface
);
VOID
USBHUB_SetDeviceHandleData(
PDEVICE_EXTENSION_HUB DeviceExtensionHub,
PDEVICE_OBJECT PdoDeviceObject,
PVOID DeviceData
);
NTSTATUS
USBD_CreateDeviceEx(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN OUT PUSB_DEVICE_HANDLE *DeviceData,
IN PDEVICE_OBJECT PdoDeviceObject,
IN PDEVICE_OBJECT RootHubPdo,
IN ULONG MaxPacketSize_Endpoint0,
IN OUT PULONG DeviceHackFlags,
IN USHORT PortStatus,
IN USHORT PortNumber
);
VOID
USBHUB_FlushAllTransfers(
PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBD_InitializeDeviceEx(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_DEVICE_HANDLE DeviceData,
IN PDEVICE_OBJECT RootHubPdo,
IN OUT PUSB_DEVICE_DESCRIPTOR DeviceDescriptor,
IN ULONG DeviceDescriptorLength,
IN OUT PUSB_CONFIGURATION_DESCRIPTOR ConfigDescriptor,
IN ULONG ConfigDescriptorLength
);
NTSTATUS
USBD_RemoveDeviceEx(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_DEVICE_HANDLE DeviceData,
IN PDEVICE_OBJECT RootHubPdo,
IN ULONG Flags
);
NTSTATUS
USBD_GetDeviceInformationEx(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_NODE_CONNECTION_INFORMATION_EX DeviceInformation,
IN ULONG DeviceInformationLength,
IN PUSB_DEVICE_HANDLE DeviceData
);
NTSTATUS
USBD_MakePdoNameEx(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN OUT PUNICODE_STRING PdoNameUnicodeString,
IN ULONG Index
);
ULONG
USBD_CalculateUsbBandwidthEx(
IN ULONG MaxPacketSize,
IN UCHAR EndpointType,
IN BOOLEAN LowSpeed
);
NTSTATUS
USBD_RestoreDeviceEx(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN OUT PUSB_DEVICE_HANDLE OldDeviceData,
IN OUT PUSB_DEVICE_HANDLE NewDeviceData,
IN PDEVICE_OBJECT RootHubPdo
);
NTSTATUS
USBD_QuerySelectiveSuspendEnabled(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN OUT PBOOLEAN SelectiveSuspendEnabled
);
NTSTATUS
USBD_SetSelectiveSuspendEnabled(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN BOOLEAN SelectiveSuspendEnabled
);
NTSTATUS
USBHUB_GetRootHubName(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PVOID Buffer,
IN PULONG BufferLength
);
//ULONG
//USBD_GetHackFlags(
// IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
// );
#endif
NTSTATUS
USBH_SyncResetPort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber);
NTSTATUS
USBH_SyncResetDevice (
IN PDEVICE_OBJECT DeviceObject
);
NTSTATUS
USBH_SyncResumePort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber);
NTSTATUS
USBH_SyncSuspendPort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber);
VOID
USBH_ProcessHubStateChange(
IN PHUB_STATE CurrentHubState,
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub);
VOID
USBH_ProcessPortStateChange(
IN PPORT_STATE CurrentPortState,
IN USHORT PortNumber,
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub);
NTSTATUS
USBH_SyncGetPortStatus(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber,
OUT PUCHAR DataBuffer,
IN ULONG DataBufferLength);
NTSTATUS
USBH_SyncClearPortStatus(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber,
IN USHORT Feature);
NTSTATUS
USBH_SyncClearHubStatus(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT Feature);
NTSTATUS
USBH_SyncEnablePort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber);
NTSTATUS
USBH_SyncPowerOnPort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber,
IN BOOLEAN WaitForPowerGood);
NTSTATUS
USBH_SyncPowerOffPort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber);
NTSTATUS
USBH_SyncPowerOnPorts(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub);
NTSTATUS
DriverEntry(
IN PDRIVER_OBJECT DriverObject,
IN PUNICODE_STRING UniRegistryPath);
NTSTATUS
USBH_HubDispatch(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp);
VOID
USBH_DriverUnload(
IN PDRIVER_OBJECT DriverObject);
VOID
UsbhWait(
ULONG MiliSeconds);
NTSTATUS
USBH_PdoDispatch(
PDEVICE_EXTENSION_PORT pDeviceExtensionPort,
PIRP pIrp);
NTSTATUS
USBH_SyncGetHubDescriptor(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub);
NTSTATUS
USBH_SyncGetDeviceConfigurationDescriptor(
PDEVICE_OBJECT DeviceObject,
PUCHAR DataBuffer,
ULONG DataBufferLength,
OUT PULONG BytesReturned);
BOOLEAN
USBH_ValidateSerialNumberString(
PWCHAR DeviceId
);
NTSTATUS
USBH_CreateDevice(
PDEVICE_EXTENSION_HUB DeviceExtensionHub,
USHORT PortNumber,
USHORT PortStatus,
ULONG RetryIteration
);
NTSTATUS
USBH_FdoSyncSubmitUrb(
PDEVICE_OBJECT HubDeviceObject,
IN PURB Urb);
NTSTATUS
USBH_SyncGetRootHubPdo(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PDEVICE_OBJECT *RootHubPdo,
IN OUT PDEVICE_OBJECT *HcdDeviceObject,
IN OUT PULONG Count
);
NTSTATUS
USBH_AddDevice(
IN PDRIVER_OBJECT DriverObject,
IN PDEVICE_OBJECT PhysicalDeviceObject);
NTSTATUS
USBH_FdoPnP(
PDEVICE_EXTENSION_HUB DeviceExtensionHub,
PIRP Irp,
UCHAR MinorFunction);
NTSTATUS
USBH_FdoPower(
PDEVICE_EXTENSION_HUB DeviceExtensionHub,
PIRP Irp,
UCHAR MinorFunction);
NTSTATUS
USBH_ChangeIndication(
IN PDEVICE_OBJECT PNull,
IN PIRP Irp,
IN PVOID Context);
VOID
USBH_ChangeIndicationWorker(
PVOID Context);
NTSTATUS
USBH_PassIrp(
PIRP Irp,
PDEVICE_OBJECT NextDeviceObject);
VOID
USBH_CompleteIrp(
IN PIRP Irp,
IN NTSTATUS NtStatus);
NTSTATUS
USBH_SyncDisablePort(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber);
NTSTATUS
USBH_SyncGetHubStatus(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
OUT PUCHAR DataBuffer,
IN ULONG DataBufferLength);
NTSTATUS
USBH_FdoHubStartDevice(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp);
NTSTATUS
USBH_ParentFdoStartDevice(
IN OUT PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN PIRP Irp,
IN BOOLEAN NewList
);
NTSTATUS
USBH_ParentDispatch(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN PIRP Irp
);
NTSTATUS
USBH_GetConfigurationDescriptor(
IN PDEVICE_OBJECT DeviceObject,
IN OUT PUSB_CONFIGURATION_DESCRIPTOR *DataBuffer
);
PWCHAR
USBH_BuildDeviceID(
IN USHORT IdVendor,
IN USHORT IdProduct,
IN LONG MiId,
IN BOOLEAN IsHubClass
);
PWCHAR
USBH_BuildHardwareIDs(
IN USHORT IdVendor,
IN USHORT IdProduct,
IN USHORT BcdDevice,
IN LONG MiId,
IN BOOLEAN IsHubClass
);
PWCHAR
USBH_BuildCompatibleIDs(
IN PUCHAR CompatibleID,
IN PUCHAR SubCompatibleID,
IN UCHAR Class,
IN UCHAR SubClass,
IN UCHAR Protocol,
IN BOOLEAN DeviceClass,
IN BOOLEAN DeviceIsHighSpeed
);
PWCHAR
USBH_BuildInstanceID(
IN PWCHAR UniqueIdString,
IN ULONG Length
);
NTSTATUS
USBH_GetDeviceDescriptor(
IN PDEVICE_OBJECT HubFDO,
OUT PUSB_DEVICE_DESCRIPTOR DeviceDescriptor
);
NTSTATUS
USBH_GetDeviceQualifierDescriptor(
IN PDEVICE_OBJECT DevicePDO,
OUT PUSB_DEVICE_QUALIFIER_DESCRIPTOR DeviceQualifierDescriptor
);
NTSTATUS
USBH_FunctionPdoDispatch(
IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction,
IN PIRP Irp
);
NTSTATUS
USBH_CloseConfiguration(
IN PDEVICE_EXTENSION_FDO DeviceExtensionFdo
);
NTSTATUS
USBH_IoctlGetNodeInformation(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_IoctlGetHubCapabilities(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_IoctlGetNodeConnectionInformation(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp,
IN BOOLEAN ExApi
);
NTSTATUS
USBH_IoctlGetDescriptorForPDO(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_SyncSubmitUrb(
IN PDEVICE_OBJECT DeviceObject,
IN PURB Urb
);
NTSTATUS
USBH_Transact(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUCHAR DataBuffer,
IN ULONG DataBufferLength,
IN BOOLEAN DataOutput,
IN USHORT Function,
IN UCHAR RequestType,
IN UCHAR Request,
IN USHORT Feature,
IN USHORT Port,
OUT PULONG BytesTransferred
);
NTSTATUS
USBH_GetNameFromPdo(
IN PDEVICE_OBJECT PdoDeviceObject,
IN OUT PUNICODE_STRING DeviceNameUnicodeString
);
NTSTATUS
USBH_MakeName(
PDEVICE_OBJECT PdoDeviceObject,
ULONG NameLength,
PWCHAR Name,
PUNICODE_STRING UnicodeString
);
NTSTATUS
USBH_FdoStartDevice(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
VOID
USBH_QueryCapabilities(
IN PDEVICE_OBJECT PdoDeviceObject,
IN PDEVICE_CAPABILITIES DeviceCapabilities
);
NTSTATUS
USBH_FdoStopDevice(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_FdoRemoveDevice(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_FdoQueryBusRelations(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
VOID
UsbhFdoCleanup(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_ProcessDeviceInformation(
IN OUT PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_PdoQueryId(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_PdoPnP(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp,
IN UCHAR MinorFunction,
IN PBOOLEAN CompleteIrp
);
NTSTATUS
USBH_PdoRemoveDevice(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_PdoQueryCapabilities(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_PdoSetPower(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_ParentFdoStopDevice(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN PIRP Irp
);
NTSTATUS
USBH_ParentFdoRemoveDevice(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN PIRP Irp
);
VOID
UsbhParentFdoCleanup(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent
);
NTSTATUS
USBH_ParentQueryBusRelations(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN PIRP Irp
);
NTSTATUS
USBH_FunctionPdoQueryId(
IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction,
IN PIRP Irp
);
NTSTATUS
USBH_FunctionPdoQueryDeviceText(
IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction,
IN PIRP Irp
);
NTSTATUS
USBH_FunctionPdoPnP(
IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction,
IN PIRP Irp,
IN UCHAR MinorFunction,
IN OUT PBOOLEAN IrpNeedsCompletion
);
NTSTATUS
USBH_IoctlGetNodeName(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
BOOLEAN
USBH_HubIsBusPowered(
IN PDEVICE_OBJECT DeviceObject,
IN PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor
);
NTSTATUS
USBH_SyncGetStatus(
IN PDEVICE_OBJECT HubFDO,
IN OUT PUSHORT StatusBits,
IN USHORT function,
IN USHORT Index
);
NTSTATUS
USBH_GetSerialNumberString(
IN PDEVICE_OBJECT DevicePDO,
IN OUT PWCHAR *SerialNumberBuffer,
IN OUT PUSHORT SerialNumberBufferLength,
IN LANGID LanguageId,
IN UCHAR StringIndex
);
NTSTATUS
USBH_SyncGetStringDescriptor(
IN PDEVICE_OBJECT DevicePDO,
IN UCHAR Index,
IN USHORT LangId,
IN OUT PUSB_STRING_DESCRIPTOR Buffer,
IN ULONG BufferLength,
IN PULONG BytesReturned,
IN BOOLEAN ExpectHeader
);
NTSTATUS
USBH_SyncFeatureRequest(
IN PDEVICE_OBJECT DeviceObject,
IN USHORT FeatureSelector,
IN USHORT Index,
IN USHORT Target,
IN BOOLEAN ClearFeature
);
NTSTATUS
USBH_PdoIoctlGetPortStatus(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_PdoIoctlEnablePort(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_FdoDeferPoRequestCompletion(
IN PDEVICE_OBJECT DeviceObject,
IN UCHAR MinorFunction,
IN POWER_STATE PowerState,
IN PVOID Context,
IN PIO_STATUS_BLOCK IoStatus
);
NTSTATUS
USBH_DeferIrpCompletion(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN PVOID Context
);
NTSTATUS
USBH_BuildFunctionConfigurationDescriptor(
IN PDEVICE_EXTENSION_FUNCTION DeviceExtensionFunction,
IN OUT PUCHAR Buffer,
IN ULONG BufferLength,
OUT PULONG BytesReturned
);
NTSTATUS
USBH_ResetHub(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_ResetDevice(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber,
IN BOOLEAN KeepConfiguration,
IN ULONG RetryIteration
);
NTSTATUS
USBH_PdoIoctlResetPort(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_SetPowerD1orD2(
IN PIRP Irp,
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_SetPowerD0(
IN PIRP Irp,
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_SetPowerD3(
IN PIRP Irp,
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_PdoQueryDeviceText(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_CheckDeviceLanguage(
IN PDEVICE_OBJECT DevicePDO,
IN LANGID LanguageId
);
NTSTATUS
USBH_PdoPower(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp,
IN UCHAR MinorFunction
);
NTSTATUS
USBH_SubmitInterruptTransfer(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_SymbolicLink(
BOOLEAN CreateFlag,
PDEVICE_EXTENSION_PORT DeviceExtensionPort,
LPGUID lpGuid
);
NTSTATUS
USBH_SyncPowerOffPorts(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_RestoreDevice(
IN OUT PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN BOOLEAN KeepConfiguration
);
NTSTATUS
USBH_PnPIrp_Complete(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN PVOID Context
);
NTSTATUS
USBH_ParentCreateFunctionList(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN PUSBD_INTERFACE_LIST_ENTRY InterfaceList,
IN PURB Urb
);
NTSTATUS
USBH_PdoStopDevice(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_ChangeIndicationProcessChange(
IN PDEVICE_OBJECT PNull,
IN PIRP Irp,
IN PVOID Context
);
NTSTATUS
USBH_ChangeIndicationAckChangeComplete(
IN PDEVICE_OBJECT PNull,
IN PIRP Irp,
IN PVOID Context
);
NTSTATUS
USBH_ChangeIndicationAckChange(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp,
IN PURB Urb,
IN USHORT Port,
IN USHORT FeatureSelector
);
NTSTATUS
USBH_IoctlGetNodeConnectionDriverKeyName(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_FdoSubmitWaitWakeIrp(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_ChangeIndicationQueryChange(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp,
IN PURB Urb,
IN USHORT Port
);
NTSTATUS
USBH_InvalidatePortDeviceState(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USB_CONNECTION_STATUS ConnectStatus,
IN USHORT PortNumber
);
NTSTATUS
USBH_PdoEvent(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber
);
USB_CONNECTION_STATUS
UsbhGetConnectionStatus(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_ParentSubmitWaitWakeIrp(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent
);
NTSTATUS
USBH_WriteFailReason(
IN PDEVICE_OBJECT PhysicalDeviceObject,
IN ULONG FailReason
);
NTSTATUS
USBH_WriteRegistryKeyValue (
IN HANDLE Handle,
IN PWCHAR KeyNameString,
IN ULONG KeyNameStringLength,
IN ULONG Data
);
NTSTATUS
USBH_SystemControl (
IN PDEVICE_EXTENSION_FDO DeviceExtensionFdo,
IN PIRP Irp
);
NTSTATUS
USBH_PortSystemControl (
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_ExecuteWmiMethod(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN ULONG GuidIndex,
IN ULONG InstanceIndex,
IN ULONG MethodId,
IN ULONG InBufferSize,
IN ULONG OutBufferSize,
IN OUT PUCHAR Buffer
);
NTSTATUS
USBH_QueryWmiRegInfo(
IN PDEVICE_OBJECT DeviceObject,
OUT PULONG RegFlags,
OUT PUNICODE_STRING InstanceName,
OUT PUNICODE_STRING *RegistryPath,
OUT PUNICODE_STRING MofResourceName,
OUT PDEVICE_OBJECT *Pdo
);
NTSTATUS
USBH_PortQueryWmiRegInfo(
IN PDEVICE_OBJECT DeviceObject,
OUT PULONG RegFlags,
OUT PUNICODE_STRING InstanceName,
OUT PUNICODE_STRING *RegistryPath,
OUT PUNICODE_STRING MofResourceName,
OUT PDEVICE_OBJECT *Pdo
);
NTSTATUS
USBH_FlushPortChange(
IN OUT PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN OUT PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_PdoIoctlCyclePort(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_ResetPortOvercurrent(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber,
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_SyncGetControllerInfo(
IN PDEVICE_OBJECT DeviceObject,
IN PVOID Buffer,
IN ULONG BufferLength,
IN ULONG Ioctl
);
NTSTATUS
USBH_SyncGetHubName(
IN PDEVICE_OBJECT DeviceObject,
IN PVOID Buffer,
IN ULONG BufferLength
);
NTSTATUS
USBH_IoctlHubSymbolicName(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
NTSTATUS
USBH_SetWmiDataBlock(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN ULONG GuidIndex,
IN ULONG InstanceIndex,
IN ULONG BufferSize,
IN PUCHAR Buffer
);
NTSTATUS
USBH_QueryWmiDataBlock(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN ULONG GuidIndex,
IN ULONG InstanceIndex,
IN ULONG InstanceCount,
IN OUT PULONG InstanceLengthArray,
IN ULONG OutBufferSize,
OUT PUCHAR Buffer
);
NTSTATUS
USBH_PortQueryWmiDataBlock(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN ULONG GuidIndex,
IN ULONG InstanceIndex,
IN ULONG InstanceCount,
IN OUT PULONG InstanceLengthArray,
IN ULONG OutBufferSize,
OUT PUCHAR Buffer
);
NTSTATUS
USBH_SetRegistryKeyValue (
IN HANDLE Handle,
IN PUNICODE_STRING KeyNameUnicodeString,
IN PVOID Data,
IN ULONG DataLength,
IN ULONG KeyType
);
NTSTATUS
USBH_SetPdoRegistryParameter (
IN PDEVICE_OBJECT PhysicalDeviceObject,
IN PWCHAR KeyName,
IN ULONG KeyNameLength,
IN PVOID Data,
IN ULONG DataLength,
IN ULONG KeyType,
IN ULONG DevInstKeyType
);
NTSTATUS
USBH_GetPdoRegistryParameter(
IN PDEVICE_OBJECT PhysicalDeviceObject,
IN PWCHAR ValueName,
OUT PVOID Data,
IN ULONG DataLength,
OUT PULONG Type,
OUT PULONG ActualDataLength
);
NTSTATUS
USBH_OsVendorCodeQueryRoutine(
IN PWSTR ValueName,
IN ULONG ValueType,
IN PVOID ValueData,
IN ULONG ValueLength,
IN PVOID Context,
IN PVOID EntryContext
);
VOID
USBH_GetMsOsVendorCode(
IN PDEVICE_OBJECT DeviceObject
);
NTSTATUS
USBH_GetMsOsFeatureDescriptor(
IN PDEVICE_OBJECT DeviceObject,
IN UCHAR Recipient,
IN UCHAR Interface,
IN USHORT Index,
IN OUT PVOID DataBuffer,
IN ULONG DataBufferLength,
OUT PULONG BytesReturned
);
VOID
USBH_InstallExtPropDesc (
IN PDEVICE_OBJECT DeviceObject
);
VOID
USBH_InstallExtPropDescSections (
PDEVICE_OBJECT DeviceObject,
PMS_EXT_PROP_DESC pMsExtPropDesc
);
PMS_EXT_CONFIG_DESC
USBH_GetExtConfigDesc (
IN PDEVICE_OBJECT DeviceObject
);
BOOLEAN
USBH_ValidateExtConfigDesc (
IN PMS_EXT_CONFIG_DESC MsExtConfigDesc,
IN PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor
);
NTSTATUS
USBH_CalculateInterfaceBandwidth(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PUSBD_INTERFACE_INFORMATION Interface,
IN OUT PULONG Bandwidth // in kenr units?
);
NTSTATUS
USBH_RegQueryDeviceIgnoreHWSerNumFlag(
IN USHORT idVendor,
IN USHORT idProduct,
IN OUT PBOOLEAN IgnoreHWSerNumFlag
);
NTSTATUS
USBH_RegQueryGenericUSBDeviceString(
IN OUT PWCHAR *GenericUSBDeviceString
);
VOID
USBH_ParentCompleteFunctionWakeIrps(
IN PDEVICE_EXTENSION_PARENT DeviceExtensionParent,
IN NTSTATUS NtStatus
);
BOOLEAN
USBH_ValidateConfigurationDescriptor(
PUSB_CONFIGURATION_DESCRIPTOR ConfigurationDescriptor,
USBD_STATUS *UsbdSatus
);
VOID
USBH_HubCompletePortWakeIrps(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN NTSTATUS NtStatus
);
VOID
USBH_HubCompletePortIdleIrps(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN NTSTATUS NtStatus
);
PUSB_DEVICE_HANDLE
USBH_SyncGetDeviceHandle(
IN PDEVICE_OBJECT DeviceObject
);
VOID
USBH_CompletePowerIrp(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp,
IN NTSTATUS NtStatus
);
VOID
USBH_HubESDRecoveryWorker(
IN PVOID Context);
NTSTATUS
USBH_ScheduleESDRecovery(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
// these are for the USB2 'backport'
PWCHAR
USBH_BuildHubHardwareIDs(
IN USHORT IdVendor,
IN USHORT IdProduct,
IN USHORT BcdDevice,
IN LONG MiId
);
PWCHAR
USBH_BuildHubCompatibleIDs(
IN UCHAR Class,
IN UCHAR SubClass,
IN UCHAR Protocol,
IN BOOLEAN DeviceClass,
IN BOOLEAN DeviceIsHighSpeed
);
NTSTATUS
USBH_IoctlCycleHubPort(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
VOID
USBH_InternalCyclePort(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT PortNumber,
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
PWCHAR
USBH_BuildHubDeviceID(
IN USHORT IdVendor,
IN USHORT IdProduct,
IN LONG MiId
);
NTSTATUS
USBHUB_GetBusInfo(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_BUS_NOTIFICATION BusInfo,
IN PVOID BusContext
);
NTSTATUS
USBHUB_GetBusInfoDevice(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PUSB_BUS_NOTIFICATION BusInfo
);
NTSTATUS
USBHUB_GetBusInterfaceUSBDI(
IN PDEVICE_OBJECT HubPdo,
IN PUSB_BUS_INTERFACE_USBDI_V2 BusInterface
);
USB_DEVICE_TYPE
USBH_GetDeviceType(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_DEVICE_HANDLE DeviceData
);
VOID
USBH_CompletePortIdleNotification(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
VOID
USBH_PortIdleNotificationCancelRoutine(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp
);
NTSTATUS
USBH_FdoSubmitIdleRequestIrp(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_HubSetD0(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBHUB_GetControllerName(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_HUB_NAME Buffer,
IN ULONG BufferLength
);
NTSTATUS
USBHUB_GetExtendedHubInfo(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PUSB_EXTHUB_INFORMATION_0 ExtendedHubInfo
);
BOOLEAN
USBH_DoesHubNeedWaitWake(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
VOID
USBH_CheckHubIdle(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_PdoSetContentId(
IN PIRP irp,
IN PVOID pKsProperty,
IN PVOID pvData
);
BOOLEAN
USBH_CheckDeviceIDUnique(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN USHORT IDVendor,
IN USHORT IDProduct,
IN PWCHAR SerialNumberBuffer,
IN USHORT SerialNumberBufferLength
);
VOID
USBH_IdleCompletePowerHubWorker(
IN PVOID Context
);
BOOLEAN
USBH_DeviceIs2xDualMode(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
PDEVICE_EXTENSION_HUB
USBH_GetRootHubDevExt(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
VOID
USBH_CheckLeafHubsIdle(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
VOID
USBH_HubCancelWakeIrp(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
VOID
USBH_HubCancelIdleIrp(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
NTSTATUS
USBH_IoctlGetNodeConnectionAttributes(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub,
IN PIRP Irp
);
VOID
USBH_CompletePortIdleIrpsWorker(
IN PVOID Context);
VOID
USBH_CompletePortWakeIrpsWorker(
IN PVOID Context);
VOID
USBH_HubAsyncPowerWorker(
IN PVOID Context);
VOID
USBH_IdleCancelPowerHubWorker(
IN PVOID Context);
NTSTATUS
USBD_InitUsb2Hub(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
VOID
USBH_PdoSetCapabilities(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort
);
NTSTATUS
USBH_HubPnPIrp_Complete(
IN PDEVICE_OBJECT DeviceObject,
IN PIRP Irp,
IN PVOID Context
);
NTSTATUS
USBH_RegQueryUSBGlobalSelectiveSuspend(
IN OUT PBOOLEAN DisableSelectiveSuspend
);
VOID
USBH_SyncRefreshPortAttributes(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBD_RegisterRhHubCallBack(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBD_UnRegisterRhHubCallBack(
IN PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
NTSTATUS
USBH_PdoStartDevice(
IN PDEVICE_EXTENSION_PORT DeviceExtensionPort,
IN PIRP Irp
);
#define PDO_EXT(p) PdoExt((p))
PDEVICE_EXTENSION_PORT
PdoExt(
PDEVICE_OBJECT DeviceObject
);
#ifdef TEST_MS_DESC
#pragma message ("Warning! Compiling in non-retail test code!")
NTSTATUS
USBH_SyncGetMsOsDescriptor(
IN PDEVICE_OBJECT DeviceObject,
IN USHORT Index,
IN OUT PUCHAR DataBuffer,
IN ULONG DataBufferLength,
OUT PULONG BytesReturned);
NTSTATUS
USBH_TestGetMsOsDescriptor(
IN PDEVICE_OBJECT DeviceObject,
IN USHORT Index
);
#endif
#define LOG_PNP 0x00000001
#if DBG
NTSTATUS
USBH_GetClassGlobalDebugRegistryParameters(
);
VOID
UsbhInfo(
PDEVICE_EXTENSION_HUB DeviceExtensionHub
);
VOID
USBH_ShowPortState(
IN USHORT PortNumber,
IN PPORT_STATE PortState
);
#define DEBUG_LOG
#define USBH_ASSERT(exp) \
if (!(exp)) { \
USBH_Assert( #exp, __FILE__, __LINE__, NULL );\
}
VOID
USBH_Assert(
IN PVOID FailedAssertion,
IN PVOID FileName,
IN ULONG LineNumber,
IN PCHAR Message
);
#else
#define USBH_ASSERT(exp)
#define UsbhInfo(de)
#endif
#ifdef DEBUG_LOG
VOID
USBH_LogInit(
);
VOID
USBH_LogFree(
);
#define LOGENTRY(mask, sig, info1, info2, info3) \
USBH_Debug_LogEntry(mask, sig, \
(ULONG_PTR)info1, \
(ULONG_PTR)info2, \
(ULONG_PTR)info3)
VOID
USBH_Debug_LogEntry(
IN ULONG Mask,
IN CHAR *Name,
IN ULONG_PTR Info1,
IN ULONG_PTR Info2,
IN ULONG_PTR Info3
);
#else
#define LOGENTRY(mask, sig, info1, info2, info3)
#define USBH_LogInit()
#define USBH_LogFree()
#endif
// last workitem will let the shutdown code continue
// !! do not reference the devicExtension beyond this point
// if event is signaled
#define USBH_DEC_PENDING_IO_COUNT(de) \
LOGENTRY(LOG_PNP, "PEN-", de, &de->PendingRequestEvent, de->PendingRequestCount); \
if (InterlockedDecrement(&de->PendingRequestCount) == 0) {\
USBH_ASSERT(de->HubFlags & HUBFLAG_DEVICE_STOPPING); \
LOGENTRY(LOG_PNP, "hWAK", de, &de->PendingRequestEvent, de->PendingRequestCount); \
KeSetEvent(&de->PendingRequestEvent, 1, FALSE); \
}
#define USBH_INC_PENDING_IO_COUNT(de) \
{\
LOGENTRY(LOG_PNP, "PEN+", de, &de->PendingRequestEvent, de->PendingRequestCount); \
InterlockedIncrement(&de->PendingRequestCount);\
}
PPORT_DATA
USBH_PortDataDataFromPdo(
PDEVICE_EXTENSION_HUB HubDevExt,
PDEVICE_OBJECT Pdo
);