Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

745 lines
17 KiB

;/*++
;
;Copyright (c) 1991 Microsoft Corporation
;
;Module Name:
;
; msg.h
;
;Abstract:
;
; This file contains the message definitions for osloader
;
;Author:
;
; John Vert (jvert) 12-Nov-1993
;
;Revision History:
;
;Notes:
;
; This file is generated from msg.mc
;
;--*/
;
;#ifndef _BLDR_MSG_
;#define _BLDR_MSG_
;
;
MessageID=9000 SymbolicName=BL_MSG_FIRST
Language=English
.
MessageID=9001 SymbolicName=LOAD_SW_INT_ERR_CLASS
Language=English
Windows yaz�l�mdaki bir hata nedeniyle baŸlat�lamad�.
Bu sorunu bildirin :
.
MessageID=9002 SymbolicName=LOAD_SW_MISRQD_FILE_CLASS
Language=English
Windows aŸa§�daki dosya bulunamad�§� ve gerekli oldu§u
i‡in baŸlat�lamad�:
.
MessageID=9003 SymbolicName=LOAD_SW_BAD_FILE_CLASS
Language=English
Windows aŸa§�daki dosyan�n bozuk bir kopyas� nedeniyle
baŸlat�lamad� :
.
MessageID=9004 SymbolicName=LOAD_SW_MIS_FILE_CLASS
Language=English
Windows aŸa§�daki dosya eksik veya bozuk oldu§u i‡in
baŸlat�lamad�:
.
MessageID=9005 SymbolicName=LOAD_HW_MEM_CLASS
Language=English
Windows bir donan�m bellek yap�land�rmas� sorunu
nedeniyle baŸlat�lamad�.
.
MessageID=9006 SymbolicName=LOAD_HW_DISK_CLASS
Language=English
Windows bir bilgisayar disk donan�m yap�land�rmas� sorunu nedeniyle
baŸlat�lamad�.
.
MessageID=9007 SymbolicName=LOAD_HW_GEN_ERR_CLASS
Language=English
Windows bir genel bilgisayar donan�m yap�land�rmas� sorunu nedeniyle
baŸlat�lamad�.
.
MessageID=9008 SymbolicName=LOAD_HW_FW_CFG_CLASS
Language=English
Windows aŸa§�daki ARC �retim bilgisi ”ny�kleme yap�land�rma sorunu
nedeniyle baŸlat�lamad� :
.
MessageID=9009 SymbolicName=DIAG_BL_MEMORY_INIT
Language=English
Donan�m bellek yap�land�rmas�n� ve RAM miktar�n� g”zden ge‡irin.
.
MessageID=9010 SymbolicName=DIAG_BL_CONFIG_INIT
Language=English
€ok fazla yap�land�rma girdisi.
.
MessageID=9011 SymbolicName=DIAG_BL_IO_INIT
Language=English
Disk b”l�m tablolar�na eriŸilemedi
.
MessageID=9012 SymbolicName=DIAG_BL_FW_GET_BOOT_DEVICE
Language=English
'osloadpartition' parametresi ayar� ge‡ersiz.
.
MessageID=9013 SymbolicName=DIAG_BL_OPEN_BOOT_DEVICE
Language=English
Se‡ili ”ny�kleme disketinden okunamad�. ™ny�kleme yolunu ve disk donan�m�n�
g”zden ge‡irin.
.
MessageID=9014 SymbolicName=DIAG_BL_FW_GET_SYSTEM_DEVICE
Language=English
'systempartition' parametresi ayar� ge‡ersiz.
.
MessageID=9015 SymbolicName=DIAG_BL_FW_OPEN_SYSTEM_DEVICE
Language=English
Se‡ili sistem ”ny�kleme disketinden okunamad�.
'systempartition' yolunu denetleyin.
.
MessageID=9016 SymbolicName=DIAG_BL_GET_SYSTEM_PATH
Language=English
'osloadfilename' parametresi ge‡erli bir dosyay� g”stermiyor.
.
MessageID=9017 SymbolicName=DIAG_BL_LOAD_SYSTEM_IMAGE
Language=English
<Windows root>\system32\ntoskrnl.exe.
.
MessageID=9018 SymbolicName=DIAG_BL_FIND_HAL_IMAGE
Language=English
'osloader' parametresi ge‡erli bir dosyay� g”stermiyor.
.
MessageID=9019 SymbolicName=DIAG_BL_LOAD_HAL_IMAGE_X86
Language=English
<Windows root>\system32\hal.dll.
.
MessageID=9020 SymbolicName=DIAG_BL_LOAD_HAL_IMAGE_ARC
Language=English
'osloader'\hal.dll
.
;#ifdef _X86_
;#define DIAG_BL_LOAD_HAL_IMAGE DIAG_BL_LOAD_HAL_IMAGE_X86
;#else
;#define DIAG_BL_LOAD_HAL_IMAGE DIAG_BL_LOAD_HAL_IMAGE_ARC
;#endif
MessageID=9021 SymbolicName=DIAG_BL_LOAD_SYSTEM_IMAGE_DATA
Language=English
Y�kleyici hatas� 1.
.
MessageID=9022 SymbolicName=DIAG_BL_LOAD_HAL_IMAGE_DATA
Language=English
Y�kleyici hatas� 2.
.
MessageID=9023 SymbolicName=DIAG_BL_LOAD_SYSTEM_DLLS
Language=English
Y�kleme i‡in ‡ekirdek DLLleri gerekli.
.
MessageID=9024 SymbolicName=DIAG_BL_LOAD_HAL_DLLS
Language=English
y�kleme i‡in HAL DLLleri gerekli.
.
MessageID=9026 SymbolicName=DIAG_BL_FIND_SYSTEM_DRIVERS
Language=English
sistem s�r�c�lerini bul.
.
MessageID=9027 SymbolicName=DIAG_BL_READ_SYSTEM_DRIVERS
Language=English
sistem s�r�c�lerini oku.
.
MessageID=9028 SymbolicName=DIAG_BL_LOAD_DEVICE_DRIVER
Language=English
sistem ”ny�kleme ayg�t s�r�c�s�n� y�klemedi.
.
MessageID=9029 SymbolicName=DIAG_BL_LOAD_SYSTEM_HIVE
Language=English
donan�m yap�land�rma dosyas�n� y�kle.
.
MessageID=9030 SymbolicName=DIAG_BL_SYSTEM_PART_DEV_NAME
Language=English
sistem b”l�m� ad�n� ayg�t ad�n� bul.
.
MessageID=9031 SymbolicName=DIAG_BL_BOOT_PART_DEV_NAME
Language=English
”ny�kleme b”l�m ad�n� bul.
.
MessageID=9032 SymbolicName=DIAG_BL_ARC_BOOT_DEV_NAME
Language=English
HAL ve sistem yollar� i‡in ARC ad�n� d�zg�n oluŸturmad�.
.
MessageID=9034 SymbolicName=DIAG_BL_SETUP_FOR_NT
Language=English
Y�kleyici hatas� 3.
.
MessageID=9035 SymbolicName=DIAG_BL_KERNEL_INIT_XFER
Language=English
<windows root>\system32\ntoskrnl.exe
.
MessageID=9036 SymbolicName=LOAD_SW_INT_ERR_ACT
Language=English
Bu sorunu destek g”revlisine bildirin.
.
MessageID=9037 SymbolicName=LOAD_SW_FILE_REST_ACT
Language=English
™zg�n Kur disketini veya CD-ROM kullan�p Windows Kuru baŸlatarak bu
dosyay� onarmay� deneyebilirsiniz.
Onar�m� baŸlatmak i‡in ilk ekranda 'r'yi se‡in.
.
MessageID=9038 SymbolicName=LOAD_SW_FILE_REINST_ACT
Language=English
Yukar�daki dosyan�n bir kopyas�n� yeniden y�kleyin.
.
MessageID=9039 SymbolicName=LOAD_HW_MEM_ACT
Language=English
Ek bilgi i‡in donan�m gereksinimleri hakk�ndaki Windows
belgelerine ve donan�m elkitaplar�n�za bak�n.
.
MessageID=9040 SymbolicName=LOAD_HW_DISK_ACT
Language=English
Ek bilgi i‡in donan�m disk yap�land�rmas� hakk�ndaki Windows
belgelerine ve donan�m elkitaplar�n�za bak�n.
.
MessageID=9041 SymbolicName=LOAD_HW_GEN_ACT
Language=English
Ek bilgi i‡in donan�m yap�land�rmas� hakk�ndaki Windows
belgelerine ve donan�m elkitaplar�n�za bak�n.
.
MessageID=9042 SymbolicName=LOAD_HW_FW_CFG_ACT
Language=English
Ek bilgi i‡in ARC yap�land�rma se‡enekleri hakk�ndaki Windows
belgelerine ve donan�m elkitaplar�n�za bak�n.
.
MessageID=9043 SymbolicName=BL_LKG_MENU_HEADER
Language=English
Donan�m Profili/Yap�land�rma Kurtarma Men�s�
Bu men� Windows baŸlat�ld�§�nda kullan�lacak bir donan�m profili
se‡menize olanak sa§lar.
Sisteminiz do§ru baŸlam�yorsa, baŸlang�‡ sorunlar�n� aŸabilen
”nceki bir sistem yap�land�rmas�na ge‡iŸ yapabilirsiniz.
™NEML˜: Son baŸar�l� baŸlang�‡tan sonra yap�lan sistem yap�land�rma
de§iŸiklikleri g”z ard� edilir.
.
MessageID=9044 SymbolicName=BL_LKG_MENU_TRAILER
Language=English
Vurgulamay� istedi§iniz se‡ime taŸ�mak i‡in yukar� ve aŸa§� ok tuŸlar�n�
kullan�n. Ard�ndan ENTER'e bas�n.
.
MessageID=9045 SymbolicName=BL_LKG_MENU_TRAILER_NO_PROFILES
Language=English
�u anda tan�ml� donan�m profilleri yok. Donan�m profilleri denetim masas�n�n
Sistem uygulamas�ndan oluŸturulabilir.
.
MessageID=9046 SymbolicName=BL_SWITCH_LKG_TRAILER
Language=English
En Son ˜yi yap�land�rmaya ge‡iŸ yapmak i‡in 'L'ye bas�n.
Bu men�den ‡�kmak ve bilgisayar�n�z� yeniden baŸlatmak i‡in F3'e bas�n.
.
MessageID=9047 SymbolicName=BL_SWITCH_DEFAULT_TRAILER
Language=English
Varsay�lan yap�land�rmaya ge‡iŸ yapmak i‡in 'D'ye bas�n.
Bu men�den ‡�kmak ve bilgisayar�n�z� yeniden baŸlatmak i‡in F3'e bas�n.
.
;//
;// The following two messages are used to provide the mnemonic keypress
;// that toggles between the Last Known Good control set and the default
;// control set. (see BL_SWITCH_LKG_TRAILER and BL_SWITCH_DEFAULT_TRAILER)
;//
MessageID=9048 SymbolicName=BL_LKG_SELECT_MNEMONIC
Language=English
L
.
MessageID=9049 SymbolicName=BL_DEFAULT_SELECT_MNEMONIC
Language=English
D
.
MessageID=9050 SymbolicName=BL_LKG_TIMEOUT
Language=English
Vurgulanan se‡imin otomatik olarak baŸlat�lmas� i‡in kalan saniye: %d
.
MessageID=9051 SymbolicName=BL_LKG_MENU_PROMPT
Language=English
Donan�m Profili/En Son ˜yi Yap�land�rma men�s�n� ‡a§�rmak i‡in �˜MD˜ ara
‡ubu§una bas�n
.
MessageID=9052 SymbolicName=BL_BOOT_DEFAULT_PROMPT
Language=English
Varsay�lan donan�m yap�land�rmas�n�n ”ny�klemesini yap
.
;//
;// The following messages are used during hibernation restoration
;//
MessageID=9053 SymbolicName=HIBER_BEING_RESTARTED
Language=English
Sistem ”nceki konumundan baŸlat�l�yor.
Kesmek i‡in ara ‡ubu§una bas�n.
.
MessageID=9054 SymbolicName=HIBER_ERROR
Language=English
Sistem ”nceki konumundan baŸlat�lamad�
.
MessageID=9055 SymbolicName=HIBER_ERROR_NO_MEMORY
Language=English
‡�nk� bellek yok.
.
MessageID=9056 SymbolicName=HIBER_ERROR_BAD_IMAGE
Language=English
‡�nk� geri y�kleme resmi bozuk.
.
MessageID=9057 SymbolicName=HIBER_IMAGE_INCOMPATIBLE
Language=English
‡�nk� geri y�kleme resmi ge‡erli yap�land�rmayla uyumlu de§il.
.
MessageID=9058 SymbolicName=HIBER_ERROR_OUT_OF_REMAP
Language=English
‡�nk� bir i‡ hata oluŸtu.
.
MessageID=9059 SymbolicName=HIBER_INTERNAL_ERROR
Language=English
‡�nk� bir i‡ hata oluŸtu.
.
MessageID=9060 SymbolicName=HIBER_READ_ERROR
Language=English
€�nk� bir okuma hatas� oluŸtu.
.
MessageID=9061 SymbolicName=HIBER_PAUSE
Language=English
Sistemin yeniden baŸlat�lmas� duraklat�ld�:
.
MessageID=9062 SymbolicName=HIBER_CANCEL
Language=English
Geri y�kleme verisini sil ve sistem ”ny�kleme men�s�ne devam et
.
MessageID=9063 SymbolicName=HIBER_CONTINUE
Language=English
Sistemin yeniden baŸlat�lmas�na devam et
.
MessageID=9064 SymbolicName=HIBER_RESTART_AGAIN
Language=English
Sistemi ”nceki konumundan yeniden baŸlatma giriŸimi baŸar�s�z oldu. Yeniden
baŸlatma yine denensin mi?
.
MessageID=9065 SymbolicName=HIBER_DEBUG_BREAK_ON_WAKE
Language=English
Sistem uyanmas� �zerindeki hata ay�klama kesme noktas�yla devam et
.
MessageID=9066 SymbolicName=LOAD_SW_MISMATCHED_KERNEL
Language=English
Belirtilen ‡ekirde§in olmamas� ya da bu iŸlemciyle uyum olmamas�
y�z�nden Windows baŸlat�lam�yor.
.
MessageID=9067 SymbolicName=BL_MSG_STARTING_WINDOWS
Language=English
Windows BaŸlat�l�yor...
.
MessageID=9068 SymbolicName=BL_MSG_RESUMING_WINDOWS
Language=English
Windows S�rd�r�l�yor...
.
MessageID=9069 SymbolicName=BL_EFI_OPTION_FAILURE
Language=English
Windows could not start because there was an error reading
the boot settings from NVRAM.
Please check your firmware settings. You may need to restore your
NVRAM settings from a backup.
.
;
; //
; // Following messages are for the x86-specific
; // boot menu.
; //
;
MessageID=10001 SymbolicName=BL_ENABLED_KD_TITLE
Language=English
[hata ay�klay�c� etkin]
.
MessageID=10002 SymbolicName=BL_DEFAULT_TITLE
Language=English
Windows (varsay�lan)
.
MessageID=10003 SymbolicName=BL_MISSING_BOOT_INI
Language=English
NTLDR: BOOT.INI dosyas� bulunamad�.
.
MessageID=10004 SymbolicName=BL_MISSING_OS_SECTION
Language=English
NTLDR: boot.txt dosyas�nda [operating systems] b”l�m� yok.
.
MessageID=10005 SymbolicName=BL_BOOTING_DEFAULT
Language=English
%s ”§esinden varsay�lan ‡ekirdek ”ny�klemesi yap�l�yor.
.
MessageID=10006 SymbolicName=BL_SELECT_OS
Language=English
BaŸlat�lacak iŸletim sistemini se‡in:
.
MessageID=10007 SymbolicName=BL_MOVE_HIGHLIGHT
Language=English
Vurgulamay� se‡iminize taŸ�mak i‡in aŸa§� ve yukar� ok tuŸlar�n� kullan�n.
Se‡mek i‡in ENTER'e bas�n.
.
MessageID=10008 SymbolicName=BL_TIMEOUT_COUNTDOWN
Language=English
Vurgulanan se‡imin otomatik olarak baŸlat�lmas� i‡in kalan saniye:
.
MessageID=10009 SymbolicName=BL_INVALID_BOOT_INI
Language=English
Ge‡ersiz BOOT.INI dosyas�
%s ”§esinden ”ny�kleniyor
.
MessageID=10010 SymbolicName=BL_REBOOT_IO_ERROR
Language=English
™ny�kleme kesimi dosyas�na eriŸilirken G/€ Hatas�
%s\BOOTSECT.DOS
.
MessageID=10011 SymbolicName=BL_DRIVE_ERROR
Language=English
NTLDR: %s s�r�c�s� a‡�lamad�
.
MessageID=10012 SymbolicName=BL_READ_ERROR
Language=English
NTLDR: BOOT.INI okunurken ™nemli Hata %d
.
MessageID=10013 SymbolicName=BL_NTDETECT_MSG
Language=English
NTDETECT V5.0 Donan�m Denetleniyor ...
.
MessageID=10014 SymbolicName=BL_NTDETECT_FAILURE
Language=English
NTDETECT baŸar�s�z oldu
.
MessageID=10015 SymbolicName=BL_DEBUG_SELECT_OS
Language=English
Ge‡erli Se‡im:
BaŸl�k....: %s
Yol.......: %s
Se‡enekler: %s
.
MessageID=10016 SymbolicName=BL_DEBUG_NEW_OPTIONS
Language=English
Yeni y�kleme se‡eneklerini girin:
.
MessageID=10017 SymbolicName=BL_HEADLESS_REDIRECT_TITLE
Language=English
[EMS etkin]
.
MessageID=10018 SymbolicName=BL_INVALID_BOOT_INI_FATAL
Language=English
Ge‡ersiz BOOT.INI dosyas�
.
;
; //
; // Following messages are for the advanced boot menu
; //
;
MessageID=11001 SymbolicName=BL_ADVANCEDBOOT_TITLE
Language=English
Windows GeliŸmiŸ Se‡enekler Men�s�
Bir se‡enek belirleyin:
.
MessageID=11002 SymbolicName=BL_SAFEBOOT_OPTION1
Language=English
G�venli Mod
.
MessageID=11003 SymbolicName=BL_SAFEBOOT_OPTION2
Language=English
A§ Deste§i ile G�venli Mod
.
MessageID=11004 SymbolicName=BL_SAFEBOOT_OPTION3
Language=English
Ad�m Ad�m Onaylama Modu
.
MessageID=11005 SymbolicName=BL_SAFEBOOT_OPTION4
Language=English
Komut ˜stemiyle G�venli Mod
.
MessageID=11006 SymbolicName=BL_SAFEBOOT_OPTION5
Language=English
VGA Modu
.
MessageID=11007 SymbolicName=BL_SAFEBOOT_OPTION6
Language=English
Dizin Hizmetleri Geri Y�kleme Modu (Windows etki alan� denetleyicileri)
.
MessageID=11008 SymbolicName=BL_LASTKNOWNGOOD_OPTION
Language=English
En Son ˜yi Yap�land�rma (‡al�Ÿan en son ayarlar�n�z)
.
MessageID=11009 SymbolicName=BL_DEBUG_OPTION
Language=English
Hata Ay�klama Modu
.
;#if defined(REMOTE_BOOT)
;MessageID=11010 SymbolicName=BL_REMOTEBOOT_OPTION1
;Language=English
;Uzaktan ™ny�kleme Bak�m ve Sorun Giderme
;.
;
;MessageID=11011 SymbolicName=BL_REMOTEBOOT_OPTION2
;Language=English
;€evrimd�Ÿ� ™nbelle§i Temizle
;.
;
;MessageID=11012 SymbolicName=BL_REMOTEBOOT_OPTION3
;Language=English
;Yaln�zca sunucudan gelen dosyalar� kullanarak y�kle
;.
;#endif // defined(REMOTE_BOOT)
MessageID=11013 SymbolicName=BL_BOOTLOG
Language=English
™ny�kleme G�nl�§�n� EtkinleŸtir
.
MessageID=11014 SymbolicName=BL_ADVANCED_BOOT_MESSAGE
Language=English
Windows Sorun giderme ve ileri baŸlang�‡ se‡enekleri i‡in F8'e bas�n.
.
MessageID=11015 SymbolicName=BL_BASEVIDEO
Language=English
VGA Modunu EtkinleŸtir
.
MessageID=11016 SymbolicName=BL_DISABLE_SAFEBOOT
Language=English
G�venli ”ny�klemeyi devred�Ÿ� b�rak�p normal ”ny�kleme i‡in ESCAPE'e
bas�n.
.
MessageID=11017 SymbolicName=BL_MSG_BOOT_NORMALLY
Language=English
Windows Ola§an �ekilde BaŸlas�n
.
MessageID=11018 SymbolicName=BL_MSG_OSCHOICES_MENU
Language=English
˜Ÿletim Sistemi Se‡enekleri Men�s�ne D”n
.
MessageID=11019 SymbolicName=BL_MSG_REBOOT
Language=English
Yeniden BaŸlat
.
MessageID=11020 SymbolicName=BL_ADVANCEDBOOT_AUTOLKG_TITLE
Language=English
Windows baŸlamad�. Bunun nedeni en son yapt�§�n�z yaz�l�m veya donan�m
de§iŸikli§i olabilir.
Bilgisayar�n�z yan�t vermiyorsa, beklenmedik bir Ÿekilde yeniden
baŸlad�ysa veya dosya ve klas”rlerinizi korumak i‡in otomatik olarak
kapand�ysa, en son ‡al�Ÿan do§ru ayarlara geri d”nmek i‡in En Son ˜yi
Yap�land�rma'y� se‡in.
™nceki baŸlatma giriŸimi g�‡ kayb� veya g�‡ veya s�f�rlama d�§mesine
bas�l� olmas�ndan veya kesin bilmedi§iniz bir sebepten ise Windows'u
.
MessageID=11021 SymbolicName=BL_ADVANCEDBOOT_AUTOSAFE_TITLE
Language=English
Windows baŸar�yla kapat�lamad�. Bu yan�t vermeyen bir sistem y�z�nden
olduysa ya da sistem veriyi korumak i‡in kapand�ysa, aŸa§�daki men�den
G�venli Mod yap�land�rmalar�ndan birisini se‡erek kurtarabilirsiniz:
.
MessageID=11022 SymbolicName=BL_ADVANCEDBOOT_TIMEOUT
Language=English
Windows'un baŸlamas�na kalan saniye:
.
;
;//
;// Following messages are the symbols used
;// in the Hibernation Restore percent completed UI.
;//
;// These symbols are here because they employ high-ASCII
;// line drawing characters, which need to be localized
;// for fonts that may not have such characters (or have
;// them in a different ASCII location).
;//
;// This primarily affects FE character sets.
;//
;// Note that only the FIRST character of any of these
;// messages is ever looked at by the code.
;//
;
; // Just a base message, contains nothing.
;
;
; //
; // NOTE : donot change the Message ID values for HIBER_UI_BAR_ELEMENT
; // and BLDR_UI_BAR_BACKGROUND from 11513 & 11514
;
;
; // The character used to draw the percent-complete bar
;
;
MessageID=11513 SymbolicName=HIBER_UI_BAR_ELEMENT
Language=English
Û
.
;
; // The character used to draw the percent-complete bar
;
;
MessageID=11514 SymbolicName=BLDR_UI_BAR_BACKGROUND
Language=English
±
.
;#if defined(REMOTE_BOOT)
;;
;; //
;; // Following messages are for warning the user about
;; // an impending autoformat of the hard disk.
;; //
;;
;
;MessageID=12002 SymbolicName=BL_WARNFORMAT_TRAILER
;Language=English
;Press ENTER to continue booting Windows, otherwise turn off
;your remote boot machine.
;.
;
;MessageID=12003 SymbolicName=BL_WARNFORMAT_CONTINUE
;Language=English
;Continue
;.
;MessageID=12004 SymbolicName=BL_FORCELOGON_HEADER
;Language=English
; Auto-Format
;
;Windows has detected a new hard disk in your remote boot
;machine. Before Windows can use this disk, you must logon and
;validate that you have access to this disk.
;
;WARNING: Windows will automatically repartition and format
;this disk to accept the new operating system. All data on the
;hard disk will be lost if you choose to continue. If you do
;not want to continue, power off the computer now and contact
;your administrator.
;.
;#endif // defined(REMOTE_BOOT)
;
; //
; // Ramdisk related messages. DO NOT CHANGE the message numbers
; // as they are kept in sync with \base\boot\inc\ramdisk.h.
; //
; // Note that some message numbers are skipped in order to retain
; // consistency with the .NET source base.
; //
;
MessageID=15000 SymbolicName=BL_RAMDISK_GENERAL_FAILURE
Language=English
Windows, bir RAMDISK'ten a‡�l�rken bir hata y�z�nden baŸlat�lamad�.
.
MessageID=15003 SymbolicName=BL_RAMDISK_BOOT_FAILURE
Language=English
Windows, RAMDISK yans�mas�n� a‡amad�.
.
MessageID=15010 SymbolicName=BL_RAMDISK_DOWNLOAD
Language=English
RAMDISK yans�mas� y�kleniyor...
.
;#endif // _BLDR_MSG_