Source code of Windows XP (NT5)
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

1816 lines
72 KiB

/********************************************************************************
** Copyright (c) 1998-2000 Microsoft Corporation. All Rights Reserved.
**
** Portions Copyright (c) 1998-1999 Intel Corporation
**
********************************************************************************/
// Every debug output has "Modulname text".
static char STR_MODULENAME[] = "prophnd: ";
#include <limits.h>
#include "mintopo.h"
// These are the values passed to the property handler in the instance
// parameter that normally represents the channel.
const LONG CHAN_LEFT = 0;
const LONG CHAN_RIGHT = 1;
const LONG CHAN_MASTER = -1;
// paged code goes here.
#pragma code_seg("PAGE")
/*****************************************************************************
* CMiniportTopologyICH::SetMultichannelMute
*****************************************************************************
* This function is used to set one of the multichannel mutes.
* It takes the master mono into account when calculating the mute.
* Make sure that you updated the stNodeCache before calling this function.
*/
NTSTATUS CMiniportTopologyICH::SetMultichannelMute
(
IN CMiniportTopologyICH *that,
IN TopoNodes Mute
)
{
NTSTATUS ntStatus = STATUS_SUCCESS;
BOOL bMute;
// The first calls to SetMultichannelMute could be without valid
// cache information because WDMAUD might currently query the nodes
// (this is at system startup). When WDMAUD queried all nodes then
// all cache information will be valid.
if (that->stNodeCache[NODE_VIRT_MASTERMONO_MUTE].bLeftValid &&
that->stNodeCache[Mute].bLeftValid)
{
// We get the master mono mute and the mute that is to change.
// Then we "or" them and write the value to the register.
bMute = that->stNodeCache[NODE_VIRT_MASTERMONO_MUTE].lLeft ||
that->stNodeCache[Mute].lLeft;
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (Mute),
bMute ? -1 : 0,
that->AdapterCommon->GetNodeMask (Mute));
DOUT (DBG_PROPERTY, ("SET: %s -> 0x%x", NodeStrings[Mute], (int)bMute));
}
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::SetMultichannelVolume
*****************************************************************************
* This function is used to set one of the multichannel volumes.
* It takes the master mono into account when calculating the volume.
* Make sure that you updated the stNodeCache before calling this function.
*/
NTSTATUS CMiniportTopologyICH::SetMultichannelVolume
(
IN CMiniportTopologyICH *that,
IN TopoNodes Volume
)
{
NTSTATUS ntStatus = STATUS_SUCCESS;
LONG lMinimum, lMaximum;
ULONG uStep;
LONG lLevel;
WORD wRegister;
// The first calls to SetMultichannelMute could be without valid
// cache information because WDMAUD might currently query the nodes
// (this is at system startup). When WDMAUD queried all nodes then
// all cache information will be valid.
if (that->stNodeCache[NODE_VIRT_MASTERMONO_VOLUME].bLeftValid &&
that->stNodeCache[NODE_VIRT_MASTERMONO_VOLUME].bRightValid &&
that->stNodeCache[Volume].bLeftValid &&
that->stNodeCache[Volume].bRightValid)
{
// We get the master mono volume and the volume that is to change.
// Then we substract master mono from it and write the value to the
// register.
lLevel = that->stNodeCache[Volume].lLeft +
that->stNodeCache[NODE_VIRT_MASTERMONO_VOLUME].lLeft;
// Translate the dB value into a register value.
// Get the registered DB values
ntStatus = GetDBValues (that->AdapterCommon, Volume,
&lMinimum, &lMaximum, &uStep);
if (!NT_SUCCESS(ntStatus))
return ntStatus;
// Check borders.
if (lLevel < lMinimum) lLevel = lMinimum;
if (lLevel > lMaximum) lLevel = lMaximum;
// Calculate the register value
wRegister = (WORD)(((lMaximum + uStep / 2) - lLevel) / uStep) << 8;
// Get the right value too.
lLevel = that->stNodeCache[Volume].lRight +
that->stNodeCache[NODE_VIRT_MASTERMONO_VOLUME].lRight;
// Check borders.
if (lLevel < lMinimum) lLevel = lMinimum;
if (lLevel > lMaximum) lLevel = lMaximum;
// Add it to the register value.
wRegister += (WORD)(((lMaximum + uStep / 2) - lLevel) / uStep);
// Write it.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (Volume),
wRegister,
that->AdapterCommon->GetNodeMask (Volume));
DOUT (DBG_PROPERTY, ("SET: %s -> 0x%x/0x%x", NodeStrings[Volume],
that->stNodeCache[Volume].lLeft +
that->stNodeCache[NODE_VIRT_MASTERMONO_VOLUME].lLeft,
lLevel));
}
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::GetDBValues
*****************************************************************************
* This function is used internally and does no parameter checking. The only
* parameter that could be invalid is the node.
* It returns the dB values (means minimum, maximum, step) of the node control,
* mainly for the property call "basic support". Sure, the node must be a
* volume or tone control node, not a mute or mux node.
*/
NTSTATUS CMiniportTopologyICH::GetDBValues
(
IN PADAPTERCOMMON AdapterCommon,
IN TopoNodes Node,
OUT LONG *plMinimum,
OUT LONG *plMaximum,
OUT ULONG *puStep
)
{
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::GetDBValues]"));
// This is going to be simple. Check the node and return the parameters.
switch (Node)
{
// These nodes could have 5bit or 6bit controls, so we first
// have to check this.
case NODE_MASTEROUT_VOLUME:
case NODE_FRONT_VOLUME:
case NODE_HPOUT_VOLUME:
case NODE_SURROUND_VOLUME:
case NODE_CENTER_VOLUME:
case NODE_LFE_VOLUME:
case NODE_VIRT_MONOOUT_VOLUME1:
case NODE_VIRT_MONOOUT_VOLUME2:
// needed for the config query
TopoNodeConfig config;
// which node to query?
config = NODEC_6BIT_MONOOUT_VOLUME;
if ((Node == NODE_MASTEROUT_VOLUME) || (Node == NODE_FRONT_VOLUME))
config = NODEC_6BIT_MASTER_VOLUME;
if (Node == NODE_HPOUT_VOLUME)
config = NODEC_6BIT_HPOUT_VOLUME;
if (Node == NODE_SURROUND_VOLUME)
config = NODEC_6BIT_SURROUND_VOLUME;
if ((Node == NODE_CENTER_VOLUME) || (Node == NODE_LFE_VOLUME))
config = NODEC_6BIT_CENTER_LFE_VOLUME;
// check if we have 6th bit support.
if (AdapterCommon->GetNodeConfig (config))
{
// 6bit control
*plMaximum = 0; // 0 dB
*plMinimum = 0xFFA18000; // -94.5 dB
*puStep = 0x00018000; // 1.5 dB
}
else
{
// 5bit control
*plMaximum = 0; // 0 dB
*plMinimum = 0xFFD18000; // -46.5 dB
*puStep = 0x00018000; // 1.5 dB
}
break;
case NODE_VIRT_MASTERMONO_VOLUME:
// This virtual control gets added to the speaker volumes.
// We assume 5-bit volumes.
*plMaximum = 0; // 0 dB
*plMinimum = 0xFFD18000; // -46.5 dB
*puStep = 0x00018000; // 1.5 dB
break;
case NODE_PCBEEP_VOLUME:
*plMaximum = 0; // 0 dB
*plMinimum = 0xFFD30000; // -45 dB
*puStep = 0x00030000; // 3 dB
break;
case NODE_PHONE_VOLUME:
case NODE_MICIN_VOLUME:
case NODE_LINEIN_VOLUME:
case NODE_CD_VOLUME:
case NODE_VIDEO_VOLUME:
case NODE_AUX_VOLUME:
case NODE_WAVEOUT_VOLUME:
*plMaximum = 0x000C0000; // 12 dB
*plMinimum = 0xFFDD8000; // -34.5 dB
*puStep = 0x00018000; // 1.5 dB
break;
case NODE_VIRT_MASTER_INPUT_VOLUME1:
case NODE_VIRT_MASTER_INPUT_VOLUME2:
case NODE_VIRT_MASTER_INPUT_VOLUME3:
case NODE_VIRT_MASTER_INPUT_VOLUME4:
case NODE_VIRT_MASTER_INPUT_VOLUME5:
case NODE_VIRT_MASTER_INPUT_VOLUME6:
case NODE_VIRT_MASTER_INPUT_VOLUME7:
case NODE_VIRT_MASTER_INPUT_VOLUME8:
case NODE_MIC_VOLUME:
*plMaximum = 0x00168000; // 22.5 dB
*plMinimum = 0; // 0 dB
*puStep = 0x00018000; // 1.5 dB
break;
case NODE_BASS:
case NODE_TREBLE:
*plMaximum = 0x000A8000; // 10.5 dB
*plMinimum = 0xFFF58000; // -10.5 dB
*puStep = 0x00018000; // 1.5 dB
break;
// These nodes can be fixed or variable.
// Normally we won't display a fixed volume slider, but if 3D is
// supported and both sliders are fixed, we have to display one fixed
// slider for the advanced control panel.
case NODE_VIRT_3D_CENTER:
case NODE_VIRT_3D_DEPTH:
if (AdapterCommon->GetNodeConfig (NODEC_3D_CENTER_ADJUSTABLE) &&
(Node == NODE_VIRT_3D_CENTER))
{
*plMaximum = 0x000F0000; // +15 dB
*plMinimum = 0x00000000; // 0 dB
*puStep = 0x00010000; // 1 dB
}
else
if (AdapterCommon->GetNodeConfig (NODEC_3D_DEPTH_ADJUSTABLE) &&
(Node == NODE_VIRT_3D_DEPTH))
{
*plMaximum = 0x000F0000; // +15 dB
*plMinimum = 0x00000000; // 0 dB
*puStep = 0x00010000; // 1 dB
}
else
{
// In case it is fixed, read the value and return it.
WORD wRegister;
// read the register
if (!NT_SUCCESS (AdapterCommon->ReadCodecRegister (
AdapterCommon->GetNodeReg (Node), &wRegister)))
wRegister = 0; // in case we fail.
// mask out the control
wRegister &= AdapterCommon->GetNodeMask (Node);
if (Node == NODE_VIRT_3D_CENTER)
{
wRegister >>= 8;
}
// calculate the dB value.
*plMaximum = (DWORD)(-wRegister) << 16; // fixed value
*plMinimum = (DWORD)(-wRegister) << 16; // fixed value
*puStep = 0x00010000; // 1 dB
}
break;
case NODE_INVALID:
default:
// poeser pupe, tu.
DOUT (DBG_ERROR, ("GetDBValues: Invalid node requested."));
return STATUS_INVALID_PARAMETER;
}
return STATUS_SUCCESS;
}
/*****************************************************************************
* CMiniportTopologyICH::PropertyHandler_OnOff
*****************************************************************************
* Accesses a KSAUDIO_ONOFF value property.
* This function (property handler) is called by portcls every time there is a
* get or a set request for the node. The connection between the node type and
* the property handler is made in the automation table which is referenced
* when you register the node.
* We use this property handler for all nodes that have a checkbox, means mute
* controls and the special checkbox controls under advanced properties, which
* are AGC and LOUDNESS.
*/
NTSTATUS CMiniportTopologyICH::PropertyHandler_OnOff
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
NTSTATUS ntStatus = STATUS_INVALID_PARAMETER;
LONG channel;
TopoNodes NodeDef;
// The major target is the object pointer to the topology miniport.
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
ASSERT (that);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::PropertyHandler_OnOff]"));
// validate node
if (PropertyRequest->Node == (ULONG)-1)
return ntStatus;
// do the appropriate action for the request.
// we should do a get or a set?
if ((PropertyRequest->Verb & KSPROPERTY_TYPE_GET) ||
(PropertyRequest->Verb & KSPROPERTY_TYPE_SET))
{
// validate parameters
if ((PropertyRequest->InstanceSize < sizeof(LONG)) ||
(PropertyRequest->ValueSize < sizeof(BOOL)))
return ntStatus;
// get channel
channel = *(PLONG)PropertyRequest->Instance;
// check channel types, return when unknown
// as you can see, we have no multichannel support.
if ((channel != CHAN_LEFT) &&
(channel != CHAN_RIGHT) &&
(channel != CHAN_MASTER))
return ntStatus;
// We have only mono mutes or On/Off checkboxes although they might control
// a stereo path. For example, we have a 1-bit mute for CD Volume. This
// mute controls both CD Volume channels.
if (channel == CHAN_RIGHT)
return ntStatus;
// get the buffer
PBOOL OnOff = (PBOOL)PropertyRequest->Value;
// Switch on the node id. This is just for parameter checking.
// If something goes wrong, we will immediately return with
// ntStatus, which is STATUS_INVALID_PARAMETER.
switch (NodeDef = that->TransNodeNrToNodeDef (PropertyRequest->Node))
{
// These are mutes for mono volumes.
case NODE_PCBEEP_MUTE:
case NODE_PHONE_MUTE:
case NODE_MIC_MUTE:
case NODE_MICIN_MUTE:
case NODE_CENTER_MUTE:
case NODE_LFE_MUTE:
case NODE_VIRT_MASTERMONO_MUTE:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_MUTE)
return ntStatus;
break;
// Well, this one is a AGC, although there is no _automatic_ gain
// control, but we have a mic boost (which is some kind of manual
// gain control).
// The 3D Bypass is a real fake, but that's how you get check boxes
// on the advanced control panel.
// Both controls are in a mono path.
case NODE_VIRT_WAVEOUT_3D_BYPASS:
case NODE_MIC_BOOST:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_AGC)
return ntStatus;
break;
// Simulated Stereo is a AGC control in a stereo path.
case NODE_SIMUL_STEREO:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_AGC)
return ntStatus;
break;
// This is a loudness control in a stereo path. We have to check the
// type.
case NODE_LOUDNESS:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_LOUDNESS)
return ntStatus;
break;
// For 3D Enable and Mic are exposed as loudness in a mono path.
case NODE_VIRT_3D_ENABLE:
case NODE_MIC_SELECT:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_LOUDNESS)
return ntStatus;
break;
// These are mutes in a stereo path.
// Because the HW has only one mute-bit for the stereo channel, we
// expose the mute as mono. this works in current OS and hopefully
// will work in future OS.
case NODE_WAVEOUT_MUTE:
case NODE_LINEIN_MUTE:
case NODE_CD_MUTE:
case NODE_VIDEO_MUTE:
case NODE_AUX_MUTE:
case NODE_MASTEROUT_MUTE:
case NODE_FRONT_MUTE:
case NODE_SURROUND_MUTE:
case NODE_HPOUT_MUTE:
// just check the type.
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_MUTE)
return ntStatus;
break;
case NODE_INVALID:
default:
// Ooops.
DOUT (DBG_ERROR, ("PropertyHandler_OnOff: Invalid node requested."));
return ntStatus;
}
// Now, do some action!
if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET)
{
WORD wRegister;
// Read the HW register for the node except NODE_VIRT_MASTERMONO_MUTE,
// since this is pure virtual.
if (NodeDef != NODE_VIRT_MASTERMONO_MUTE)
{
// get the register and read it.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef), &wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// Mask out every unused bit.
wRegister &= that->AdapterCommon->GetNodeMask (NodeDef);
// Store the value.
*OnOff = wRegister ? TRUE : FALSE;
}
else
{
// Assume no mute for master mono.
*OnOff = FALSE;
}
// When we have cache information then return this instead of the
// calculated value. If we don't, store the calculated value.
if (that->stNodeCache[NodeDef].bLeftValid)
*OnOff = that->stNodeCache[NodeDef].lLeft;
else
{
that->stNodeCache[NodeDef].lLeft = *OnOff;
that->stNodeCache[NodeDef].bLeftValid = -1;
}
PropertyRequest->ValueSize = sizeof(BOOL);
DOUT (DBG_PROPERTY, ("GET: %s = 0x%x", NodeStrings[NodeDef], *OnOff));
// Set the return code here.
ntStatus = STATUS_SUCCESS;
}
else // this must be a set.
{
// First update the node cache.
that->stNodeCache[NodeDef].bLeftValid = -1;
that->stNodeCache[NodeDef].lLeft = (*OnOff) ? TRUE : FALSE;
//
// If we have a master mono, then we have to program the speaker
// mutes a little different.
// Check for master mono (surround or headphone present) and
// if one of the speaker mutes is requested.
//
if ((that->AdapterCommon->GetPinConfig (PINC_SURROUND_PRESENT) ||
that->AdapterCommon->GetPinConfig (PINC_HPOUT_PRESENT)) &&
((NodeDef == NODE_VIRT_MASTERMONO_MUTE) || (NodeDef == NODE_LFE_MUTE) ||
(NodeDef == NODE_CENTER_MUTE) || (NodeDef == NODE_FRONT_MUTE) ||
(NodeDef == NODE_SURROUND_MUTE) || (NodeDef == NODE_HPOUT_MUTE)))
{
//
// For master mono we have to update all speakers.
//
if (NodeDef == NODE_VIRT_MASTERMONO_MUTE)
{
// Update all speaker mutes.
ntStatus = SetMultichannelMute (that, NODE_FRONT_MUTE);
if (that->AdapterCommon->GetPinConfig (PINC_HPOUT_PRESENT))
ntStatus = SetMultichannelMute (that, NODE_HPOUT_MUTE);
if (that->AdapterCommon->GetPinConfig (PINC_SURROUND_PRESENT))
ntStatus = SetMultichannelMute (that, NODE_SURROUND_MUTE);
if (that->AdapterCommon->GetPinConfig (PINC_CENTER_LFE_PRESENT))
{
ntStatus = SetMultichannelMute (that, NODE_CENTER_MUTE);
ntStatus = SetMultichannelMute (that, NODE_LFE_MUTE);
}
}
else // Update the individual speaker mute.
{
ntStatus = SetMultichannelMute (that, NodeDef);
}
}
else
{
//
// For all other mutes/checkboxes just write the value to the HW.
//
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
(*OnOff) ? -1 : 0,
that->AdapterCommon->GetNodeMask (NodeDef));
}
DOUT (DBG_PROPERTY, ("SET: %s -> 0x%x", NodeStrings[NodeDef], *OnOff));
// ntStatus was set with the write call! whatever this is, return it.
}
}
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::BasicSupportHandler
*****************************************************************************
* Assists in BASICSUPPORT accesses on level properties.
* This function is called internally every time there is a "basic support"
* request on a volume or tone control. The basic support is used to retrieve
* some information about the range of the control (from - to dB, steps) and
* which type of control (tone, volume).
* Basically, this function just calls GetDBValues to get the range information
* and fills the rest of the structure with some constants.
*/
NTSTATUS CMiniportTopologyICH::BasicSupportHandler
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::BasicSupportHandler]"));
NTSTATUS ntStatus = STATUS_INVALID_DEVICE_REQUEST;
// The major target is the object pointer to the topology miniport.
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
ASSERT (that);
// if there is enough space for a KSPROPERTY_DESCRIPTION information
if (PropertyRequest->ValueSize >= (sizeof(KSPROPERTY_DESCRIPTION)))
{
// we return a KSPROPERTY_DESCRIPTION structure.
PKSPROPERTY_DESCRIPTION PropDesc = (PKSPROPERTY_DESCRIPTION)PropertyRequest->Value;
PropDesc->AccessFlags = KSPROPERTY_TYPE_BASICSUPPORT |
KSPROPERTY_TYPE_GET |
KSPROPERTY_TYPE_SET;
PropDesc->DescriptionSize = sizeof(KSPROPERTY_DESCRIPTION) +
sizeof(KSPROPERTY_MEMBERSHEADER) +
sizeof(KSPROPERTY_STEPPING_LONG);
PropDesc->PropTypeSet.Set = KSPROPTYPESETID_General;
PropDesc->PropTypeSet.Id = VT_I4;
PropDesc->PropTypeSet.Flags = 0;
PropDesc->MembersListCount = 1;
PropDesc->Reserved = 0;
// if return buffer can also hold a range description, return it too
if (PropertyRequest->ValueSize >= (sizeof(KSPROPERTY_DESCRIPTION) +
sizeof(KSPROPERTY_MEMBERSHEADER) + sizeof(KSPROPERTY_STEPPING_LONG)))
{
// fill in the members header
PKSPROPERTY_MEMBERSHEADER Members = (PKSPROPERTY_MEMBERSHEADER)(PropDesc + 1);
Members->MembersFlags = KSPROPERTY_MEMBER_STEPPEDRANGES;
Members->MembersSize = sizeof(KSPROPERTY_STEPPING_LONG);
Members->MembersCount = 1;
Members->Flags = 0;
// fill in the stepped range
PKSPROPERTY_STEPPING_LONG Range = (PKSPROPERTY_STEPPING_LONG)(Members + 1);
ntStatus = GetDBValues (that->AdapterCommon,
that->TransNodeNrToNodeDef (PropertyRequest->Node),
&Range->Bounds.SignedMinimum,
&Range->Bounds.SignedMaximum,
&Range->SteppingDelta);
Range->Reserved = 0;
// set the return value size
PropertyRequest->ValueSize = sizeof(KSPROPERTY_DESCRIPTION) +
sizeof(KSPROPERTY_MEMBERSHEADER) +
sizeof(KSPROPERTY_STEPPING_LONG);
DOUT (DBG_PROPERTY, ("BASIC_SUPPORT: %s max=0x%x min=0x%x step=0x%x",
NodeStrings[that->TransNodeNrToNodeDef (PropertyRequest->Node)],
Range->Bounds.SignedMaximum, Range->Bounds.SignedMinimum,
Range->SteppingDelta));
} else
{
// we hadn't enough space for the range information;
// set the return value size
PropertyRequest->ValueSize = sizeof(KSPROPERTY_DESCRIPTION);
}
ntStatus = STATUS_SUCCESS;
}
else if (PropertyRequest->ValueSize >= sizeof(ULONG))
{
// if return buffer can hold a ULONG, return the access flags
PULONG AccessFlags = (PULONG)PropertyRequest->Value;
*AccessFlags = KSPROPERTY_TYPE_BASICSUPPORT |
KSPROPERTY_TYPE_GET |
KSPROPERTY_TYPE_SET;
// set the return value size
PropertyRequest->ValueSize = sizeof(ULONG);
ntStatus = STATUS_SUCCESS;
}
// In case there was not even enough space for a ULONG in the return buffer,
// we fail this request with STATUS_INVALID_DEVICE_REQUEST.
// Any other case will return STATUS_SUCCESS.
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::PropertyHandler_Level
*****************************************************************************
* Accesses a KSAUDIO_LEVEL property.
* This function (property handler) is called by portcls every time there is a
* get, set or basic support request for the node. The connection between the
* node type and the property handler is made in the automation table which is
* referenced when you register the node.
* We use this property handler for all volume controls (and virtual volume
* controls for recording).
*/
NTSTATUS CMiniportTopologyICH::PropertyHandler_Level
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::PropertyHandler_Level]"));
NTSTATUS ntStatus = STATUS_INVALID_PARAMETER;
TopoNodes NodeDef;
LONG channel;
LONG lMinimum, lMaximum;
ULONG uStep;
// The major target is the object pointer to the topology miniport.
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
ASSERT (that);
// validate node
if (PropertyRequest->Node == (ULONG)-1)
return ntStatus;
// do the appropriate action for the request.
// we should do a get or a set?
if ((PropertyRequest->Verb & KSPROPERTY_TYPE_GET) ||
(PropertyRequest->Verb & KSPROPERTY_TYPE_SET))
{
// validate parameters
if ((PropertyRequest->InstanceSize < sizeof(LONG)) ||
(PropertyRequest->ValueSize < sizeof(LONG)))
return ntStatus;
// get channel information
channel = *((PLONG)PropertyRequest->Instance);
// check channel types, return when unknown
// as you can see, we have no multichannel support.
if ((channel != CHAN_LEFT) &&
(channel != CHAN_RIGHT) &&
(channel != CHAN_MASTER))
return ntStatus;
// get the buffer
PLONG Level = (PLONG)PropertyRequest->Value;
// Switch on the node id. This is just for parameter checking.
// If something goes wrong, we will immideately return with
// ntStatus, which is STATUS_INVALID_PARAMETER.
switch(NodeDef = that->TransNodeNrToNodeDef (PropertyRequest->Node))
{
// these are mono channels, don't respond to a right channel
// request.
case NODE_PCBEEP_VOLUME:
case NODE_PHONE_VOLUME:
case NODE_MIC_VOLUME:
case NODE_VIRT_MONOOUT_VOLUME1:
case NODE_VIRT_MONOOUT_VOLUME2:
case NODE_VIRT_MASTER_INPUT_VOLUME1:
case NODE_VIRT_MASTER_INPUT_VOLUME7:
case NODE_VIRT_MASTER_INPUT_VOLUME8:
case NODE_MICIN_VOLUME:
case NODE_VIRT_MASTERMONO_VOLUME:
case NODE_CENTER_VOLUME:
case NODE_LFE_VOLUME:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_VOLUMELEVEL)
return ntStatus;
// check channel
if (channel == CHAN_RIGHT)
return ntStatus;
// Well, this is a fake for the routine below that should work
// for all nodes ... On AC97 the right channel are the LSBs and
// mono channels have only LSBs used. Windows however thinks that
// mono channels are left channels (only). So we could say here
// we have a right channel request (to prg. the LSBs) instead of
// a left channel request. But we have some controls that are HW-
// stereo, but exposed to the system as mono. These are the virtual
// volume controls in front of the wave-in muxer for the MIC, PHONE
// and MONO MIX signals (see to the switch:
// NODE_VIRT_MASTER_INPUT_VOLUME1, 7 and 8). Saying we have a MASTER
// request makes sure the value is prg. for left and right channel,
// but on HW-mono controls the right channel is prg. only, cause the
// mask in ac97reg.h leads to a 0-mask for left channel prg. which
// just does nothing ;)
channel = CHAN_MASTER;
break;
// These are stereo channels.
case NODE_MASTEROUT_VOLUME:
case NODE_FRONT_VOLUME:
case NODE_SURROUND_VOLUME:
case NODE_HPOUT_VOLUME:
case NODE_LINEIN_VOLUME:
case NODE_CD_VOLUME:
case NODE_VIDEO_VOLUME:
case NODE_AUX_VOLUME:
case NODE_WAVEOUT_VOLUME:
case NODE_VIRT_MASTER_INPUT_VOLUME2:
case NODE_VIRT_MASTER_INPUT_VOLUME3:
case NODE_VIRT_MASTER_INPUT_VOLUME4:
case NODE_VIRT_MASTER_INPUT_VOLUME5:
case NODE_VIRT_MASTER_INPUT_VOLUME6:
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_VOLUMELEVEL)
return ntStatus;
// check channel; we don't support a get with master
if ((channel == CHAN_MASTER) &&
(PropertyRequest->Verb & KSPROPERTY_TYPE_GET))
return ntStatus;
break;
case NODE_INVALID:
default:
// Ooops
DOUT (DBG_ERROR, ("PropertyHandler_Level: Invalid node requested."));
return ntStatus;
}
// Now, do some action!
// get the registered dB values.
ntStatus = GetDBValues (that->AdapterCommon, NodeDef, &lMinimum,
&lMaximum, &uStep);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// do a get
if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET)
{
WORD wRegister;
// Read the HW register for the node except NODE_VIRT_MASTERMONO_VOLUME
// since this is pure virtual.
if (NodeDef != NODE_VIRT_MASTERMONO_VOLUME)
{
// Get the register and read it.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef), &wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// mask out every unused bit and rotate.
if (channel == CHAN_LEFT)
{
wRegister = (wRegister & (that->AdapterCommon->GetNodeMask (NodeDef)
& AC97REG_MASK_LEFT)) >> 8;
}
else // here goes mono or stereo-right
{
wRegister &= (that->AdapterCommon->GetNodeMask (NodeDef) &
AC97REG_MASK_RIGHT);
}
// Oops - NODE_PCBEEP_VOLUME doesn't use bit0. We have to adjust.
if (NodeDef == NODE_PCBEEP_VOLUME)
wRegister >>= 1;
// we have to translate the reg to dB.dB value.
switch (NodeDef)
{
// for record, we calculate it reverse.
case NODE_VIRT_MASTER_INPUT_VOLUME1:
case NODE_VIRT_MASTER_INPUT_VOLUME2:
case NODE_VIRT_MASTER_INPUT_VOLUME3:
case NODE_VIRT_MASTER_INPUT_VOLUME4:
case NODE_VIRT_MASTER_INPUT_VOLUME5:
case NODE_VIRT_MASTER_INPUT_VOLUME6:
case NODE_VIRT_MASTER_INPUT_VOLUME7:
case NODE_VIRT_MASTER_INPUT_VOLUME8:
case NODE_MICIN_VOLUME:
*Level = lMinimum + uStep * wRegister;
break;
default:
*Level = lMaximum - uStep * wRegister;
break;
}
// For the virtual controls, which are in front of a muxer, there
// is no mute control displayed. But we have a HW mute control, so
// what we do is enabling this mute when the user moves the slider
// down to the bottom and disabling it on every other position.
// We will return a PROP_MOST_NEGATIVE value in case the slider
// is moved to the bottom.
// We do this only for the "mono muxer" since the volume there ranges
// from 0 to -46.5dB. The record volumes only have a range from
// 0 to +22.5dB and we cannot mute them when the slider is down.
if ((NodeDef == NODE_VIRT_MONOOUT_VOLUME1) ||
(NodeDef == NODE_VIRT_MONOOUT_VOLUME2))
{
// read the register again.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef), &wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// return most negative value in case it is checked.
if (wRegister & AC97REG_MASK_MUTE)
*Level = PROP_MOST_NEGATIVE;
}
}
else // This is master mono volume.
{
// Assume 0dB for master mono volume.
*Level = 0;
}
// when we have cache information then return this instead
// of the calculated value. if we don't, store the calculated
// value.
// We do that twice for master because in case we didn't set
// the NodeCache yet it will be set then.
if ((channel == CHAN_LEFT) || (channel == CHAN_MASTER))
{
if (that->stNodeCache[NodeDef].bLeftValid)
*Level = that->stNodeCache[NodeDef].lLeft;
else
{
that->stNodeCache[NodeDef].lLeft = *Level;
that->stNodeCache[NodeDef].bLeftValid = -1;
}
}
if ((channel == CHAN_RIGHT) || (channel == CHAN_MASTER))
{
if (that->stNodeCache[NodeDef].bRightValid)
*Level = that->stNodeCache[NodeDef].lRight;
else
{
that->stNodeCache[NodeDef].lRight = *Level;
that->stNodeCache[NodeDef].bRightValid = -1;
}
}
// thats all, good bye.
PropertyRequest->ValueSize = sizeof(LONG);
DOUT (DBG_PROPERTY, ("GET: %s(%s) = 0x%x",NodeStrings[NodeDef],
channel==CHAN_LEFT ? "L" : "R", *Level));
// ntStatus was set with the read call! whatever this is, return it.
}
else // this must be a set
{
WORD wRegister;
LONG lLevel = *Level;
//
// Check borders.
//
// These 2 lines will have a special effect on sndvol32.
// Whenever you move the balance slider on a volume, one channel
// keeps the same and the other volume channel gets descreased.
// With ac97 on recording controls, the default slider position
// is at 0dB and the range of the volume is 0dB till +22.5dB.
// That means that panning (moving the balance slider) is simply
// impossible. If you would store the volume like sndvol gives it
// to you and you return it on a get, then the balance slider
// moves and stays at the position the user wanted it. However,
// if you return the actual volume the balance slider will jump
// back to the position that the HW can do (play with it to see
// how it works).
//
if (lLevel > lMaximum) lLevel = lMaximum;
if (lLevel < lMinimum) lLevel = lMinimum;
// First update the node cache.
if ((channel == CHAN_LEFT) || (channel == CHAN_MASTER))
{
that->stNodeCache[NodeDef].bLeftValid = -1;
that->stNodeCache[NodeDef].lLeft = lLevel;
}
if ((channel == CHAN_RIGHT) || (channel == CHAN_MASTER))
{
that->stNodeCache[NodeDef].bRightValid = -1;
that->stNodeCache[NodeDef].lRight = lLevel;
}
//
// If we have a master mono, then we have to program the speaker
// volumes a little different.
// Check for master mono (surround or headphone present) and
// if one of the speaker volumes is requested.
//
if ((that->AdapterCommon->GetPinConfig (PINC_SURROUND_PRESENT) ||
that->AdapterCommon->GetPinConfig (PINC_HPOUT_PRESENT)) &&
((NodeDef == NODE_VIRT_MASTERMONO_VOLUME) || (NodeDef == NODE_LFE_VOLUME) ||
(NodeDef == NODE_CENTER_VOLUME) || (NodeDef == NODE_FRONT_VOLUME) ||
(NodeDef == NODE_SURROUND_VOLUME) || (NodeDef == NODE_HPOUT_VOLUME)))
{
//
// For master mono we have to update all speaker volumes.
//
if (NodeDef == NODE_VIRT_MASTERMONO_VOLUME)
{
// Update all speaker volumes.
ntStatus = SetMultichannelVolume (that, NODE_FRONT_VOLUME);
if (that->AdapterCommon->GetPinConfig (PINC_HPOUT_PRESENT))
ntStatus = SetMultichannelVolume (that, NODE_HPOUT_VOLUME);
if (that->AdapterCommon->GetPinConfig (PINC_SURROUND_PRESENT))
ntStatus = SetMultichannelVolume (that, NODE_SURROUND_VOLUME);
if (that->AdapterCommon->GetPinConfig (PINC_CENTER_LFE_PRESENT))
{
ntStatus = SetMultichannelVolume (that, NODE_CENTER_VOLUME);
ntStatus = SetMultichannelVolume (that, NODE_LFE_VOLUME);
}
}
else // update the individual speaker volume only.
{
ntStatus = SetMultichannelVolume (that, NodeDef);
}
}
else // This is for all other volumes (or no master mono present).
{
// calculate the dB.dB value.
// The nodes are calculated differently.
switch (NodeDef)
{
// for record controls we calculate it 'reverse'.
case NODE_VIRT_MASTER_INPUT_VOLUME1:
case NODE_VIRT_MASTER_INPUT_VOLUME2:
case NODE_VIRT_MASTER_INPUT_VOLUME3:
case NODE_VIRT_MASTER_INPUT_VOLUME4:
case NODE_VIRT_MASTER_INPUT_VOLUME5:
case NODE_VIRT_MASTER_INPUT_VOLUME6:
case NODE_VIRT_MASTER_INPUT_VOLUME7:
case NODE_VIRT_MASTER_INPUT_VOLUME8:
// read the wavein selector.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NODE_WAVEIN_SELECT),
&wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// mask out every unused bit.
wRegister &= (that->AdapterCommon->GetNodeMask (
NODE_WAVEIN_SELECT) & AC97REG_MASK_RIGHT);
// check if the volume that we change belongs to the active
// (selected) virtual channel.
// Tricky: If the virtual nodes are not defined consecutively
// this comparision will fail.
if ((NodeDef - NODE_VIRT_MASTER_INPUT_VOLUME1) != wRegister)
return ntStatus;
// fall through for calculation.
case NODE_MICIN_VOLUME:
wRegister = (WORD)(((lLevel + uStep / 2) - lMinimum) / uStep);
break;
case NODE_VIRT_MONOOUT_VOLUME1:
case NODE_VIRT_MONOOUT_VOLUME2:
// read the monoout selector.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NODE_MONOOUT_SELECT),
&wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// mask out every unused bit.
wRegister &= that->AdapterCommon->GetNodeMask (NODE_MONOOUT_SELECT);
// check if the volume that we change belongs to the active
// (selected) virtual channel.
// Note: Monout select is set if we want to prg. MIC (Volume2).
if ((!wRegister && (NodeDef == NODE_VIRT_MONOOUT_VOLUME2)) ||
(wRegister && (NodeDef == NODE_VIRT_MONOOUT_VOLUME1)))
return ntStatus;
// fall through for calculation.
default:
wRegister = (WORD)(((lMaximum + uStep / 2) - lLevel) / uStep);
break;
}
// Oops - NODE_PCBEEP_VOLUME doesn't use bit0. We have to adjust.
if (NodeDef == NODE_PCBEEP_VOLUME)
wRegister <<= 1;
// write the stuff (with mask!).
// Note: mono channels are 'master' here (see fake above).
// this makes sure that left and right channel is prg. for the virt.
// controls. On controls that only have the right channel, the left
// channel programming does nothing cause the mask will be zero.
if ((channel == CHAN_LEFT) || (channel == CHAN_MASTER))
{
// write only left.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
wRegister << 8,
that->AdapterCommon->GetNodeMask (NodeDef) & AC97REG_MASK_LEFT);
// immediately return on error
if (!NT_SUCCESS (ntStatus))
return ntStatus;
}
if ((channel == CHAN_RIGHT) || (channel == CHAN_MASTER))
{
// write only right.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
wRegister,
that->AdapterCommon->GetNodeMask (NodeDef) & AC97REG_MASK_RIGHT);
// immediately return on error
if (!NT_SUCCESS (ntStatus))
return ntStatus;
}
// For the virtual controls, which are in front of a muxer, there
// is no mute control displayed. But we have a HW mute control, so
// what we do is enabling this mute when the user moves the slider
// down to the bottom and disabling it on every other position.
// We do this only for the "mono muxer", the recording mutes will
// never be muted.
// Tricky: Master input virtual controls must be defined consecutively.
if ((NodeDef >= NODE_VIRT_MASTER_INPUT_VOLUME1) &&
(NodeDef <= NODE_VIRT_MASTER_INPUT_VOLUME8))
{
// disable the mute; this only works because the mute and volume
// share the same register.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
0, AC97REG_MASK_MUTE);
// Just in case.
that->UpdateRecordMute ();
}
if ((NodeDef == NODE_VIRT_MONOOUT_VOLUME1) ||
(NodeDef == NODE_VIRT_MONOOUT_VOLUME2))
{
// these are only mono controls so checking one entry is enough.
if ( that->stNodeCache[NodeDef].bLeftValid &&
(that->stNodeCache[NodeDef].lLeft <= lMinimum))
{
// set the mute; this only works because the mute and volume
// share the same register.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
AC97REG_MASK_MUTE, AC97REG_MASK_MUTE);
}
else
{
// clear the mute; this only works because the mute and volume
// share the same register.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
0, AC97REG_MASK_MUTE);
}
}
}
DOUT (DBG_PROPERTY, ("SET: %s(%s) -> 0x%x", NodeStrings[NodeDef],
channel==CHAN_LEFT ? "L" : channel==CHAN_RIGHT ? "R" : "M",
*Level));
// ntStatus was set with the read call! whatever this is, return it.
}
}
else
{
if (PropertyRequest->Verb & KSPROPERTY_TYPE_BASICSUPPORT)
{
ntStatus = BasicSupportHandler (PropertyRequest);
}
}
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::PropertyHandler_Tone
*****************************************************************************
* Accesses a KSAUDIO_TONE property.
* This function (property handler) is called by portcls every time there is a
* get, set or basic support request for the node. The connection between the
* node type and the property handler is made in the automation table which is
* referenced when you register the node.
* We use this property handler for all tone controls displayed at the advanced
* property dialog in sndvol32 and the 3D controls displayed and exposed as
* normal volume controls.
*/
NTSTATUS CMiniportTopologyICH::PropertyHandler_Tone
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::PropertyHandler_Tone]"));
NTSTATUS ntStatus = STATUS_INVALID_PARAMETER;
TopoNodes NodeDef;
LONG lMinimum, lMaximum;
ULONG uStep;
// The major target is the object pointer to the topology miniport.
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
ASSERT (that);
// validate node
if (PropertyRequest->Node == (ULONG)-1)
return ntStatus;
// do the appropriate action for the request.
// we should do a get or a set?
if ((PropertyRequest->Verb & KSPROPERTY_TYPE_GET) ||
(PropertyRequest->Verb & KSPROPERTY_TYPE_SET))
{
// validate parameters
if ((PropertyRequest->InstanceSize < sizeof(LONG)) ||
(PropertyRequest->ValueSize < sizeof(LONG)))
return ntStatus;
// get the buffer
PLONG Level = (PLONG)PropertyRequest->Value;
// Switch on the node id. This is just for parameter checking.
// If something goes wrong, we will immideately return with
// ntStatus, which is STATUS_INVALID_PARAMETER.
switch(NodeDef = that->TransNodeNrToNodeDef (PropertyRequest->Node))
{
case NODE_BASS:
// check type.
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_BASS)
return ntStatus;
break;
case NODE_TREBLE:
// check type.
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_TREBLE)
return ntStatus;
break;
case NODE_VIRT_3D_CENTER:
case NODE_VIRT_3D_DEPTH:
// check 3D control
if (!that->AdapterCommon->GetNodeConfig (NODEC_3D_CENTER_ADJUSTABLE)
&& (NodeDef == NODE_VIRT_3D_CENTER))
return ntStatus;
if (!that->AdapterCommon->GetNodeConfig (NODEC_3D_DEPTH_ADJUSTABLE)
&& (NodeDef == NODE_VIRT_3D_DEPTH))
return ntStatus;
// check type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_VOLUMELEVEL)
return ntStatus;
// check channel
if (*(PLONG(PropertyRequest->Instance)) == CHAN_RIGHT)
return ntStatus;
break;
case NODE_INVALID:
default:
// Ooops
DOUT (DBG_ERROR, ("PropertyHandler_Tone: Invalid node requested."));
return ntStatus;
}
// Now, do some action!
// get the registered DB values
ntStatus = GetDBValues (that->AdapterCommon, NodeDef, &lMinimum,
&lMaximum, &uStep);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// do a get
if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET)
{
WORD wRegister;
// first get the stuff.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef), &wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// mask out every unused bit.
wRegister &= that->AdapterCommon->GetNodeMask (NodeDef);
// rotate if bass tone control or 3D center control
if ((NodeDef == NODE_BASS) || (NodeDef == NODE_VIRT_3D_CENTER))
wRegister >>= 8;
// convert from reg to dB.dB value.
if ((NodeDef == NODE_VIRT_3D_CENTER) ||
(NodeDef == NODE_VIRT_3D_DEPTH))
{
// That's for the 3D controls
*Level = lMinimum + uStep * wRegister;
}
else
{
if (wRegister == 0x000F)
*Level = 0; // bypass
else
// And that's for the tone controls
*Level = lMaximum - uStep * wRegister;
}
// when we have cache information then return this instead
// of the calculated value. if we don't, store the calculated
// value.
if (that->stNodeCache[NodeDef].bLeftValid)
*Level = that->stNodeCache[NodeDef].lLeft;
else
{
that->stNodeCache[NodeDef].lLeft = *Level;
that->stNodeCache[NodeDef].bLeftValid = -1;
}
// we return a LONG
PropertyRequest->ValueSize = sizeof(LONG);
DOUT (DBG_PROPERTY, ("GET: %s = 0x%x", NodeStrings[NodeDef], *Level));
// ntStatus was set with the read call! whatever this is, return it.
}
else // that must be a set
{
WORD wRegister;
LONG lLevel = *Level;
// calculate the dB.dB value.
// check borders.
if (lLevel > lMaximum) lLevel = lMaximum;
if (lLevel < lMinimum) lLevel = lMinimum;
// write the value to the node cache.
that->stNodeCache[NodeDef].lLeft = *Level;
that->stNodeCache[NodeDef].bLeftValid = -1;
// convert from dB.dB value to reg.
if ((NodeDef == NODE_VIRT_3D_CENTER) ||
(NodeDef == NODE_VIRT_3D_DEPTH))
{
// For 3D controls
wRegister = (WORD)(((lLevel + uStep / 2) - lMinimum) / uStep);
}
else
{
// For tone controls
wRegister = (WORD)(((lMaximum + uStep / 2) - lLevel) / uStep);
// We don't prg. 0dB Bass or 0dB Treble, instead we smartly prg.
// a bypass which is reg. value 0x0F.
if (wRegister == 7) // 0 dB
wRegister = 0x000F; // bypass
}
// rotate if bass tone control or 3D center control
if ((NodeDef == NODE_BASS) || (NodeDef == NODE_VIRT_3D_CENTER))
wRegister <<= 8;
// write the stuff.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
wRegister,
that->AdapterCommon->GetNodeMask (NodeDef));
DOUT (DBG_PROPERTY,("SET: %s -> 0x%x", NodeStrings[NodeDef], *Level));
// ntStatus was set with the write call! whatever this is, return in.
}
}
else
{
if (PropertyRequest->Verb & KSPROPERTY_TYPE_BASICSUPPORT)
{
ntStatus = BasicSupportHandler (PropertyRequest);
}
}
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::PropertyHandler_Ulong
*****************************************************************************
* Accesses a ULONG value property. For MUX and DEMUX.
* This function (property handler) is called by portcls every time there is a
* get, set or basic support request for the node. The connection between the
* node type and the property handler is made in the automation table which is
* referenced when you register the node.
* We use this property handler for all muxer controls.
*/
NTSTATUS CMiniportTopologyICH::PropertyHandler_Ulong
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::PropertyHandler_Ulong]"));
NTSTATUS ntStatus = STATUS_INVALID_PARAMETER;
TopoNodes NodeDef;
LONG lMinimum, lMaximum;
ULONG uStep;
// The major target is the object pointer to the topology miniport.
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
ASSERT (that);
// validate node instance
if (PropertyRequest->Node == (ULONG)-1)
return ntStatus;
// if we should do a get or set.
if ((PropertyRequest->Verb & KSPROPERTY_TYPE_GET) ||
(PropertyRequest->Verb & KSPROPERTY_TYPE_SET))
{
// validate buffer size.
if (PropertyRequest->ValueSize < sizeof(ULONG))
return ntStatus;
// get the pointer to the buffer.
PULONG PropValue = (PULONG)PropertyRequest->Value;
// Switch on the node id. This is just for parameter checking.
// If something goes wrong, we will immideately return with
// ntStatus, which is STATUS_INVALID_PARAMETER.
switch(NodeDef = that->TransNodeNrToNodeDef (PropertyRequest->Node))
{
case NODE_MONOOUT_SELECT:
case NODE_WAVEIN_SELECT:
// check the type
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AUDIO_MUX_SOURCE)
return ntStatus;
break;
case NODE_INVALID:
default:
// Ooops
DOUT (DBG_ERROR, ("PropertyHandler_Tone: Invalid node requested."));
return ntStatus;
}
// Now do some action!
// should we return the value?
if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET)
{
WORD wRegister;
// first get the stuff.
ntStatus = that->AdapterCommon->ReadCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef), &wRegister);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// mask out every unused bit.
wRegister &= that->AdapterCommon->GetNodeMask (NodeDef);
// calculate the selected pin
if (NodeDef == NODE_MONOOUT_SELECT)
{
// for mono out we have just one bit
if (wRegister)
*PropValue = 2;
else
*PropValue = 1;
}
else
{
// the wave in muxer is a stereo muxer, so just return the
// right channel (gives values 0-7) and adjust it by adding 1.
*PropValue = (wRegister & AC97REG_MASK_RIGHT) + 1;
}
// we return a LONG
PropertyRequest->ValueSize = sizeof(LONG);
DOUT (DBG_PROPERTY, ("GET: %s = 0x%x", NodeStrings[NodeDef],
*PropValue));
// ntStatus was set with the read call! whatever this is, return it.
}
else // that must be a set
{
TopoNodes VirtNode;
WORD wRegister;
ULONG ulSelect = *PropValue;
LONG lLevel;
// Check the selection first.
if (NodeDef == NODE_MONOOUT_SELECT)
{
if ((ulSelect < 1) || (ulSelect > 2))
return ntStatus; // STATUS_INVALID_PARAMETER
}
else
{
if ((ulSelect < 1) || (ulSelect > 8))
return ntStatus; // STATUS_INVALID_PARAMETER
}
// calculate the register value for programming.
if (NodeDef == NODE_MONOOUT_SELECT)
{
// for mono out we have just one bit
if (ulSelect == 2)
// the mask will make sure we only prg. one bit.
wRegister = -1;
else
// ulSelect == 1
wRegister = 0;
}
else
{
// *257 is the same as: (ulSelect << 8) + ulSelect
wRegister = (WORD)(ulSelect - 1) * 257;
}
// write the stuff.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (NodeDef),
wRegister,
that->AdapterCommon->GetNodeMask (NodeDef));
// Store the virt. node for later use.
// Tricky: Master input virtual controls must be defined consecutively.
if (NodeDef == NODE_MONOOUT_SELECT)
VirtNode = (TopoNodes)(NODE_VIRT_MONOOUT_VOLUME1 + (ulSelect - 1));
else
VirtNode = (TopoNodes)(NODE_VIRT_MASTER_INPUT_VOLUME1 + (ulSelect - 1));
// Virtual controls make our life more complicated. When the user
// changes the input source say from CD to LiniIn, then the system just
// sends a message to the input muxer that the selection changed.
// Cause we have only one HW register for the input muxer, all volumes
// displayed for the user are "virtualized", means they are not there,
// and when the selection changes, we have to prg. the volume of the
// selected input to the HW register. That's what we do now.
// get the registered DB values
ntStatus = GetDBValues (that->AdapterCommon, VirtNode,
&lMinimum, &lMaximum, &uStep);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
// We can be lazy here and don't check for mono controls. Reason
// is that the level handler writes the volume value for mono
// controls into both the left and right node cache ;))
if (that->stNodeCache[VirtNode].bLeftValid &&
that->stNodeCache[VirtNode].bRightValid)
{
// prg. left channel
lLevel = that->stNodeCache[VirtNode].lLeft;
// calculate the dB.dB value.
if (NodeDef == NODE_MONOOUT_SELECT)
wRegister = (WORD)(((lMaximum + uStep / 2) - lLevel) / uStep);
else
wRegister = (WORD)(((lLevel + uStep / 2) - lMinimum) / uStep);
// write left channel.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (VirtNode),
wRegister << 8,
that->AdapterCommon->GetNodeMask (VirtNode) & AC97REG_MASK_LEFT);
// prg. right channel
lLevel = that->stNodeCache[VirtNode].lRight;
// calculate the dB.dB value.
if (NodeDef == NODE_MONOOUT_SELECT)
wRegister = (WORD)(((lMaximum + uStep / 2) - lLevel) / uStep);
else
wRegister = (WORD)(((lLevel + uStep / 2) - lMinimum) / uStep);
// write right channel.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (VirtNode),
wRegister,
that->AdapterCommon->GetNodeMask (VirtNode) & AC97REG_MASK_RIGHT);
// For the virtual controls, which are in front of a muxer, there
// is no mute control displayed. But we have a HW mute control, so
// what we do is enabling this mute when the user moves the slider
// down to the bottom and disabling it on every other position.
// We do this only for the "mono muxer", the recording mutes will
// never be muted.
if (NodeDef == NODE_WAVEIN_SELECT)
{
// disable the mute; this only works because the mute and volume
// share the same register.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (VirtNode),
0, AC97REG_MASK_MUTE);
that->UpdateRecordMute ();
}
if (NodeDef == NODE_MONOOUT_SELECT)
{
// these are only mono controls so checking one entry is enough.
if ( that->stNodeCache[VirtNode].bLeftValid &&
(that->stNodeCache[VirtNode].lLeft <= lMinimum))
{
// set the mute; this only works because the mute and volume
// share the same register.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (VirtNode),
AC97REG_MASK_MUTE, AC97REG_MASK_MUTE);
}
else
{
// clear the mute; this only works because the mute and volume
// share the same register.
ntStatus = that->AdapterCommon->WriteCodecRegister (
that->AdapterCommon->GetNodeReg (VirtNode),
0, AC97REG_MASK_MUTE);
}
}
}
DOUT (DBG_PROPERTY, ("SET: %s -> 0x%x", NodeStrings[NodeDef],
*PropValue));
// ntStatus was set with the write call! whatever this is, return it.
}
}
return ntStatus;
}
/*****************************************************************************
* CMiniportTopologyICH::PropertyHandler_CpuResources
*****************************************************************************
* Propcesses a KSPROPERTY_AUDIO_CPU_RESOURCES request
* This property handler is called by the system for every node and every node
* must support this property. Basically, this property is for performance
* monitoring and we just say here that every function we claim to have has HW
* support (which by the way is true).
*/
NTSTATUS CMiniportTopologyICH::PropertyHandler_CpuResources
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::PropertyHandler_CpuResources]"));
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
NTSTATUS ntStatus = STATUS_INVALID_DEVICE_REQUEST;
ASSERT (that);
// validate node
if (PropertyRequest->Node == (ULONG)-1)
return ntStatus;
// validate the node def.
if (that->TransNodeNrToNodeDef (PropertyRequest->Node) == NODE_INVALID)
return ntStatus;
// we should do a get
if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET)
{
// just return the flag.
if (PropertyRequest->ValueSize >= sizeof(LONG))
{
*((PLONG)PropertyRequest->Value) = KSAUDIO_CPU_RESOURCES_NOT_HOST_CPU;
PropertyRequest->ValueSize = sizeof(LONG);
ntStatus = STATUS_SUCCESS;
}
else // not enough buffer.
{
ntStatus = STATUS_BUFFER_TOO_SMALL;
}
}
return ntStatus;
}
#ifdef INCLUDE_PRIVATE_PROPERTY
/*****************************************************************************
* CMiniportTopologyICH::PropertyHandler_Private
*****************************************************************************
* This is a private property that returns some AC97 codec features.
* This routine gets called whenever the topology filter gets a property
* request with KSPROSETPID_Private and KSPROPERTY_AC97_FEATURES set. It is not
* a node property but a filter property (you don't have to specify a node).
*/
NTSTATUS CMiniportTopologyICH::PropertyHandler_Private
(
IN PPCPROPERTY_REQUEST PropertyRequest
)
{
PAGED_CODE ();
ASSERT (PropertyRequest);
DOUT (DBG_PRINT, ("[CMiniportTopologyICH::PropertyHandler_Private]"));
NTSTATUS ntStatus = STATUS_INVALID_PARAMETER;
// The major target is the object pointer to the topology miniport.
CMiniportTopologyICH *that =
(CMiniportTopologyICH *) PropertyRequest->MajorTarget;
ASSERT (that);
// We only have a get defined.
if (PropertyRequest->Verb & KSPROPERTY_TYPE_GET)
{
// Check the ID ("function" in "group").
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AC97_FEATURES)
return ntStatus;
// validate buffer size.
if (PropertyRequest->ValueSize < sizeof (tAC97Features))
return ntStatus;
// The "Value" is the out buffer that you pass in DeviceIoControl call.
tAC97Features *pAC97Features = (tAC97Features *) PropertyRequest->Value;
// Check the buffer.
if (!pAC97Features)
return ntStatus;
//
// Fill the AC97Features structure.
//
// Set the volumes.
pAC97Features->MasterVolume = Volume5bit;
if (that->AdapterCommon->GetNodeConfig (NODEC_6BIT_MASTER_VOLUME))
pAC97Features->MasterVolume = Volume6bit;
pAC97Features->HeadphoneVolume = Volume5bit;
if (!that->AdapterCommon->GetPinConfig (PINC_HPOUT_PRESENT))
pAC97Features->HeadphoneVolume = VolumeDisabled;
else if (that->AdapterCommon->GetNodeConfig (NODEC_6BIT_HPOUT_VOLUME))
pAC97Features->HeadphoneVolume = Volume6bit;
pAC97Features->MonoOutVolume = Volume5bit;
if (!that->AdapterCommon->GetPinConfig (PINC_MONOOUT_PRESENT))
pAC97Features->MonoOutVolume = VolumeDisabled;
else if (that->AdapterCommon->GetNodeConfig (NODEC_6BIT_MONOOUT_VOLUME))
pAC97Features->MonoOutVolume = Volume6bit;
// The 18/20bit Resolution information.
WORD wCodecID;
// Read the reset register.
ntStatus = that->AdapterCommon->ReadCodecRegister (AC97REG_RESET, &wCodecID);
if (!NT_SUCCESS (ntStatus))
return ntStatus;
//
// Now check the DAC and ADC resolution.
//
// First the DAC.
pAC97Features->DAC = Resolution16bit;
if (wCodecID & 0x0040)
pAC97Features->DAC = Resolution18bit;
if (wCodecID & 0x0080)
pAC97Features->DAC = Resolution20bit;
// Then the ADC.
pAC97Features->ADC = Resolution16bit;
if (wCodecID & 0x0100)
pAC97Features->ADC = Resolution18bit;
if (wCodecID & 0x0200)
pAC97Features->ADC = Resolution20bit;
// 3D technique
pAC97Features->n3DTechnique = ((wCodecID & 0x7C00) >> 10);
// Set the flag for MicIn.
pAC97Features->bMicInPresent = that->AdapterCommon->
GetPinConfig (PINC_MICIN_PRESENT) ? TRUE : FALSE;
// Variable sample rate info.
pAC97Features->bVSRPCM = that->AdapterCommon->
GetNodeConfig (NODEC_PCM_VARIABLERATE_SUPPORTED) ? TRUE : FALSE;
pAC97Features->bDSRPCM = that->AdapterCommon->
GetNodeConfig (NODEC_PCM_DOUBLERATE_SUPPORTED) ? TRUE : FALSE;
pAC97Features->bVSRMIC = that->AdapterCommon->
GetNodeConfig (NODEC_MIC_VARIABLERATE_SUPPORTED) ? TRUE : FALSE;
// Additional DAC's
pAC97Features->bCenterDAC = that->AdapterCommon->
GetNodeConfig (NODEC_CENTER_DAC_PRESENT) ? TRUE : FALSE;
pAC97Features->bSurroundDAC = that->AdapterCommon->
GetNodeConfig (NODEC_SURROUND_DAC_PRESENT) ? TRUE : FALSE;
pAC97Features->bLFEDAC = that->AdapterCommon->
GetNodeConfig (NODEC_LFE_DAC_PRESENT) ? TRUE : FALSE;
// We filled out the structure.
PropertyRequest->ValueSize = sizeof (tAC97Features);
DOUT (DBG_PROPERTY, ("Get AC97Features succeeded."));
// ntStatus was set with the read call! whatever this is, return it.
}
#ifdef PROPERTY_SHOW_SET
else
{
// Just to show, we have a SET also.
if (PropertyRequest->Verb & KSPROPERTY_TYPE_SET)
{
// This is the only property for a SET.
if (PropertyRequest->PropertyItem->Id != KSPROPERTY_AC97_SAMPLE_SET)
return ntStatus;
// validate buffer size.
if (PropertyRequest->ValueSize < sizeof (DWORD))
return ntStatus;
// Get the pointer to the DWORD.
DWORD *pTimerTick = (DWORD *)PropertyRequest->Value;
// Check the buffer.
if (!pTimerTick)
return ntStatus;
// Print the message.
DOUT (DBG_ALL, ("This computer is already %d ms running Windows!", *pTimerTick));
ntStatus = STATUS_SUCCESS;
}
}
#endif
return ntStatus;
}
#endif