windows-xp/Source/XPSP1/NT/net/snmp/mibs/wfospf.mib

-- Wellfleet-Series7-MIB

-- Creation date            : Tue Feb 21 11:03:44 EST 1995
-- Series 7 Software Release: 

-- Copyright 1994 Wellfleet Communications, Inc.  All Rights
-- Reserved.  Reproduction of this document is authorized on
-- condition that the foregoing copyright notice is included.
-- This Wellfleet SNMP Management Information Base Specification
-- (Specification) embodies Wellfleet's confidential and
-- proprietary intellectual property.  Wellfleet retains all
-- title and ownership in the Specification, including any
-- revisions.
--
-- It is Wellfleet's intent to encourage the widespread use of
-- this Specification in connection with the management of
-- Wellfleet products. Wellfleet grants vendors, end-users,
-- and other interested parties a non-exclusive license to
-- use this Specification in connection with the management
-- of Wellfleet products utilizing series 7.xx system software.
--
-- This Specification is supplied "AS IS", and Wellfleet makes
-- no warranty, either expressed or implied, as to the use,
-- operation, condition, or performance of the Specification.

-- Copyright text courtesy of D. Perkins.


RFC7777-MIB DEFINITIONS ::= BEGIN

IMPORTS

  IpAddress, Counter, Gauge, TimeTicks, Opaque, enterprises
    FROM RFC1155-SMI
  OBJECT-TYPE
    FROM RFC-1212
  DisplayString
    FROM RFC1213-MIB;

wellfleet       OBJECT IDENTIFIER ::= { enterprises 18 }

wfOspfGeneralGroup      OBJECT IDENTIFIER ::= { wellfleet 3 5 3 2 3 1 }

wfOspfGeneralDelete OBJECT-TYPE
	SYNTAX  INTEGER {
		created(1),
		deleted(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		     'This value determines whether OSPF is configured'
		 "
	DEFVAL  { created }
	::= { wfOspfGeneralGroup 1 }

wfOspfGeneralDisable OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The administrative status of OSPF in the router.  The
			    value 'enabled' denotes that the OSPF Process is active
			    on at least one interface; 'disabled' disables it on
			    all interfaces.'
		 "
	DEFVAL  { enabled }
	::= { wfOspfGeneralGroup 2 }

wfOspfGeneralState OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),
		down(2),
		init(3),
		notpresent(4)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		    'The state of OSPF'
		 "
	DEFVAL  { down }
	::= { wfOspfGeneralGroup 3 }

wfOspfRouterId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'A 32-bit integer uniquely identifying the router in
			    the Autonomous System.
			    By convention, to ensure uniqueness, this should
			    default to the value of one of the router's IP
			    interface addresses.'
			 REFERENCE
			    'OSPF Version 2, C.1 Global parameters'
		 "
	::= { wfOspfGeneralGroup 4 }

wfOspfVersionNumber OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The current version number of the OSPF protocol is 2.'
			 REFERENCE
			    'OSPF Version 2, Title'
		 "
	::= { wfOspfGeneralGroup 5 }

wfOspfAreaBdrRtrStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		true(1),
		false(2)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A flag to note whether this router is an area border
			    router.'
			 REFERENCE
			    'OSPF Version 2, Section 3 Splitting the AS into Areas'
		 "
	DEFVAL  { false }
	::= { wfOspfGeneralGroup 6 }

wfOspfASBdrRtrStatus OBJECT-TYPE
	SYNTAX  INTEGER {
		true(1),
		false(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'A flag to note whether this router is an Autonomous
			    System border router.'
			 REFERENCE
			    'OSPF Version 2, Section 3.3 Classification of routers'
		 "
	DEFVAL  { false }
	::= { wfOspfGeneralGroup 7 }

wfOspfTOSSupport OBJECT-TYPE
	SYNTAX  INTEGER {
		true(1),
		false(2)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The router's support for type-of-service routing.'
			 REFERENCE
			    'OSPF Version 2, Appendix F.1.2 Optional TOS support'
		 "
	DEFVAL  { false }
	::= { wfOspfGeneralGroup 8 }

wfOspfSpfHoldDown OBJECT-TYPE
	SYNTAX  INTEGER {
		defval(1),
		maximum(10)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		       Hold Down Timer for the SPF.  The SPF will run at most
		       once per hold down timer value.  A value of 0 means no
		       hold down.
		 "
	DEFVAL  { defval }
	::= { wfOspfGeneralGroup 9 }

wfOspfSlotMask OBJECT-TYPE
	SYNTAX  INTEGER {
		slotmask(4261150720)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		       Slot mask for which slots OSPF is eligible
		       to run on.  The MSBit represents slot 1, the
		       next most significant bit represents slot 2,
		       and so on...  Slots can be 1-14.
		       Default is all slots on a BCN.
		 "
	DEFVAL  { slotmask }
	::= { wfOspfGeneralGroup 10 }

wfOspfAreaTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfAreaEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --      The OSPF Area Data Structure contains information
		     --      regarding the various areas. The interfaces and
		     --      virtual links are configured as part of these areas.
		     --      Area 0.0.0.0, by definition, is the Backbone Area
			    'Information describing the configured parameters and
			    cumulative statistics of the router's attached areas.'
			 REFERENCE
			    'OSPF Version 2, Section 6  The Area Data Structure'
		 "
	::= { wellfleet 3 5 3 2 3 2 }

wfOspfAreaEntry OBJECT-TYPE
	SYNTAX  WfOspfAreaEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'Information describing the configured parameters and
			    cumulative statistics of one of the router's attached
			    areas.'
		 "
	INDEX   { wfOspfAreaId }
	::= { wfOspfAreaTable 1 }

WfOspfAreaEntry ::= SEQUENCE {
	wfOspfAreaDelete
		INTEGER,
	wfOspfAreaDisable
		INTEGER,
	wfOspfAreaState
		INTEGER,
	wfOspfAreaId
		IpAddress,
	wfOspfAuthType
		INTEGER,
	wfOspfImportASExtern
		INTEGER,
	wfOspfStubMetric
		INTEGER,
	wfOspfImportSum
		INTEGER,
	wfOspfSpfCnt
		Counter
}

wfOspfAreaDelete OBJECT-TYPE
	SYNTAX  INTEGER {
		created(1),
		deleted(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    This value determines if the OSPF router is configured with
		     this area.
		 "
	DEFVAL  { created }
	::= { wfOspfAreaEntry 1 }

wfOspfAreaDisable OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		     This value indicates the state of this area on the OSPF
		     router.
		 "
	DEFVAL  { enabled }
	::= { wfOspfAreaEntry 2 }

wfOspfAreaState OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),
		down(2)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    This value indicates the state of the OSPF Area.
		 "
	DEFVAL  { down }
	::= { wfOspfAreaEntry 3 }

wfOspfAreaId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A 32-bit integer uniquely identifying an area.  Area
			    ID 0.0.0.0 is used for the OSPF backbone.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2 Area parameters'
		 "
	::= { wfOspfAreaEntry 4 }

wfOspfAuthType OBJECT-TYPE
	SYNTAX  INTEGER {
		nopassword(1),
		simplepassword(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The authentication type specified for an area.
			    Additional authentication types may be assigned locally
			    on a per Area basis.'
			 REFERENCE
			    'OSPF Version 2, Appendix E Authentication'
				     -- none (0),
				     -- simplePassword (1)
				     -- reserved for future specification (2..255)
				     -- reserved for AS specific values (> 255)
		 "
	DEFVAL  { nopassword }
	::= { wfOspfAreaEntry 5 }

wfOspfImportASExtern OBJECT-TYPE
	SYNTAX  INTEGER {
		true(1),
		false(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The area's support for importing AS external link-
			    state advertisements.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2 Area parameters'
		 "
	DEFVAL  { true }
	::= { wfOspfAreaEntry 6 }

wfOspfStubMetric OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		maximum(16777215)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The metric value applied at the indicated type of
			    service.  By default, this equals the least metric at
			    the type of service among the interfaces to other
			    areas.'
		 "
	DEFVAL  { minimum }
	::= { wfOspfAreaEntry 7 }

wfOspfImportSum OBJECT-TYPE
	SYNTAX  INTEGER {
		true(1),
		false(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The area's support for importing Summary 
			    advertisements into a stub area.  This variable
		   should not be set unless wfOspfImportASExtern is
		   set to FALSE'
		 "
	DEFVAL  { true }
	::= { wfOspfAreaEntry 8 }

wfOspfSpfCnt OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     The number of times the OSPF SPF algorithm
		     has been run for this area.
		 "
	::= { wfOspfAreaEntry 9 }

wfOspfLsdbTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfLsdbEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --  OSPF Link State Database
		     --      The Link State Database contains the Link State
		     --      Advertisements from throughout the areas that the
		     --      device is attached to.
			    'The OSPF Process's Links State Database.'
			 REFERENCE
			    'OSPF Version 2, Section 12 Link State Advertisements'
		"
	::= { wellfleet 3 5 3 2 3 3 }

wfOspfLsdbEntry OBJECT-TYPE
	SYNTAX  WfOspfLsdbEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'A single Link State Advertisement.'
		 "
	INDEX   { wfOspfLsdbAreaId,
		wfOspfLsdbType,
		wfOspfLsdbLSID,
		wfOspfLsdbRouterId }
	::= { wfOspfLsdbTable 1 }

WfOspfLsdbEntry ::= SEQUENCE {
	wfOspfLsdbAreaId
		IpAddress,
	wfOspfLsdbType
		INTEGER,
	wfOspfLsdbLSID
		IpAddress,
	wfOspfLsdbRouterId
		IpAddress,
	wfOspfLsdbSequence
		INTEGER,
	wfOspfLsdbAge
		INTEGER,
	wfOspfLsdbChecksum
		INTEGER,
	wfOspfLsdbAdvLen
		INTEGER
}

wfOspfLsdbAreaId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The 32 bit identifier of the Area from which the LSA
			    was received.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2 Area parameters'
		 "
	::= { wfOspfLsdbEntry 1 }

wfOspfLsdbType OBJECT-TYPE
	SYNTAX  INTEGER {
		routerlink(1),
		networklink(2),
		summarylink(3),
		assummarylink(4),
		asexternallink(5)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The type of the link state advertisement.  Each link
			    state type has a separate advertisement format.'
			 REFERENCE
			    'OSPF Version 2, Appendix A.4.1 The Link State
			    Advertisement header'
		       stubLink   (0),
				     routerLink (1),
				     networkLink (2),
				     summaryLink (3),
				     asSummaryLink (4),
				     asExternalLink (5)
		 "
	::= { wfOspfLsdbEntry 2 }

wfOspfLsdbLSID OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Link State ID is an LS Type Specific field
			    containing either a Router ID or an IP Address; it
			    identifies the piece of the routing domain that is
			    being described by the advertisement.'
			 REFERENCE
			    'OSPF Version 2, Section 12.1.4 Link State ID'
		 "
	::= { wfOspfLsdbEntry 3 }

wfOspfLsdbRouterId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The 32 bit number that uniquely identifies the
			    originating router in the Autonomous System.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.1 Global parameters'
		 "
	::= { wfOspfLsdbEntry 4 }

wfOspfLsdbSequence OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     --  Note that the OSPF Sequence Number is a 32 bit signed
		     --  integer.  It starts with the value '80000001'h,
		     --  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
		     --  Thus, a typical sequence number will be very negative.
			    'The sequence number field is a signed 32-bit integer.
			    It is used to detect old and duplicate link state
			    advertisements.  The space of sequence numbers is
			    linearly ordered.  The larger the sequence number the
			    more recent the advertisement.'
			 REFERENCE
			    'OSPF Version 2, Section 12.1.6 LS sequence number'
		 "
	::= { wfOspfLsdbEntry 5 }

wfOspfLsdbAge OBJECT-TYPE
	SYNTAX  INTEGER {
		lsdbmaxage(3600)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'This field is the age of the link state advertisement
			    in seconds.'
		      (OSPF_LSDBMINAGE = 0)
			 REFERENCE
			    'OSPF Version 2, Section 12.1.1 LS age'
		 "
	::= { wfOspfLsdbEntry 6 }

wfOspfLsdbChecksum OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'This field is the checksum of the complete contents of
			    the advertisement, excepting the age field.  The age
			    field is excepted so that an advertisement's age can be
			    incremented without updating the checksum.  The
			    checksum used is the same that is used for ISO
			    connectionless datagrams; it is commonly referred to as
			    the Fletcher checksum.'
			 REFERENCE
			    'OSPF Version 2, Section 12.1.7 LS checksum'
		 "
	::= { wfOspfLsdbEntry 7 }

wfOspfLsdbAdvLen OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The length of entire Link State Advertisement, including its
			    header.'
			 REFERENCE
			    'OSPF Version 2, Section 12 Link State Advertisements'
		 "
	::= { wfOspfLsdbEntry 8 }

wfOspfAreaRangeTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfAreaRangeEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'A range if IP addresses specified by an IP address/IP
			    network mask pair.  For example, class B address range
			    of X.X.X.X with a network mask of 255.255.0.0 includes
			    all IP addresses from X.X.0.0 to X.X.255.255'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2  Area parameters'
		 "
	::= { wellfleet 3 5 3 2 3 4 }

wfOspfAreaRangeEntry OBJECT-TYPE
	SYNTAX  WfOspfAreaRangeEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		 "
	INDEX   { wfOspfAreaRangeAreaID,
		wfOspfAreaRangeNet }
	::= { wfOspfAreaRangeTable 1 }

WfOspfAreaRangeEntry ::= SEQUENCE {
	wfOspfAreaRangeDelete
		INTEGER,
	wfOspfAreaRangeDisable
		INTEGER,
	wfOspfAreaRangeState
		INTEGER,
	wfOspfAreaRangeAreaID
		IpAddress,
	wfOspfAreaRangeNet
		IpAddress,
	wfOspfAreaRangeMask
		IpAddress
}

wfOspfAreaRangeDelete OBJECT-TYPE
	SYNTAX  INTEGER {
		created(1),
		deleted(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		     This value determines if an Area Range has been 
		     configured for the OSPF router.
		 "
	DEFVAL  { created }
	::= { wfOspfAreaRangeEntry 1 }

wfOspfAreaRangeDisable OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'This variable displays the status of
			    the entry.  Setting it to 'DISBALED' has the effect of
			    rendering it inoperative.  The internal effect (row
			    removal) is implementation dependent.'
		 "
	DEFVAL  { enabled }
	::= { wfOspfAreaRangeEntry 2 }

wfOspfAreaRangeState OBJECT-TYPE
	SYNTAX  INTEGER {
		up(1),
		down(2)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     The state of the OSPF Area Range.
		 "
	DEFVAL  { down }
	::= { wfOspfAreaRangeEntry 3 }

wfOspfAreaRangeAreaID OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Area the Address Range is to be found within.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2 Area parameters'
		 "
	::= { wfOspfAreaRangeEntry 4 }

wfOspfAreaRangeNet OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP Address of the Net or Subnet indicated by the
			    range.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2 Area parameters'
		 "
	::= { wfOspfAreaRangeEntry 5 }

wfOspfAreaRangeMask OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Subnet Mask that pertains to the Net or Subnet.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.2 Area parameters'
		 "
	::= { wfOspfAreaRangeEntry 6 }

wfOspfIfTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfIfEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --  OSPF Interface Table
		     --      The OSPF Interface Table augments the ifTable with OSPF
		     --      specific information.
			    'The OSPF Interface Table describes the interfaces from
			    the viewpoint of OSPF.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.3  Router interface
			    parameters'
		 "
	::= { wellfleet 3 5 3 2 3 5 }

wfOspfIfEntry OBJECT-TYPE
	SYNTAX  WfOspfIfEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'The OSPF Interface Entry describes one interface from
			    the viewpoint of OSPF.'
		 "
	INDEX   { wfOspfIfIpAddress,
		wfOspfAddressLessIf }
	::= { wfOspfIfTable 1 }

WfOspfIfEntry ::= SEQUENCE {
	wfOspfIfDelete
		INTEGER,
	wfOspfIfDisable
		INTEGER,
	wfOspfIfState
		INTEGER,
	wfOspfIfIpAddress
		IpAddress,
	wfOspfAddressLessIf
		INTEGER,
	wfOspfIfAreaId
		IpAddress,
	wfOspfIfType
		INTEGER,
	wfOspfIfRtrPriority
		INTEGER,
	wfOspfIfTransitDelay
		INTEGER,
	wfOspfIfRetransInterval
		INTEGER,
	wfOspfIfHelloInterval
		INTEGER,
	wfOspfIfRtrDeadInterval
		INTEGER,
	wfOspfIfPollInterval
		INTEGER,
	wfOspfIfDesignatedRouter
		IpAddress,
	wfOspfIfBackupDesignatedRouter
		IpAddress,
	wfOspfIfMetricCost
		INTEGER,
	wfOspfIfAuthKey
		OCTET STRING,
	wfOspfIfTxHellos
		Counter,
	wfOspfIfTxDBDescripts
		Counter,
	wfOspfIfTxLinkStateReqs
		Counter,
	wfOspfIfTxLinkStateUpds
		Counter,
	wfOspfIfTxLinkStateAcks
		Counter,
	wfOspfIfRxHellos
		Counter,
	wfOspfIfRxDBDescripts
		Counter,
	wfOspfIfRxLinkStateReqs
		Counter,
	wfOspfIfRxLinkStateUpds
		Counter,
	wfOspfIfRxLinkStateAcks
		Counter,
	wfOspfIfDrops
		Counter,
	wfOspfMtuSize
		INTEGER
}

wfOspfIfDelete OBJECT-TYPE
	SYNTAX  INTEGER {
		created(1),
		deleted(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		     This variable determines in an OSPF Interface has been
		     configured on the router.
		 "
	DEFVAL  { created }
	::= { wfOspfIfEntry 1 }

wfOspfIfDisable OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The OSPF interface's administrative status.  The value
			    'enabled' denotes that neighbor relationships may be
			    formed on the interface, and the interface will be
			    advertised as an internal route to some area.  The
			    value 'disabled' denotes that the interface is external
			    to OSPF.'
		 "
	DEFVAL  { enabled }
	::= { wfOspfIfEntry 2 }

wfOspfIfState OBJECT-TYPE
	SYNTAX  INTEGER {
		down(1),
		loopback(2),
		waiting(3),
		pointtopoint(4),
		designatedrouter(5),
		backupdesignatedrouter(6),
		otherdesignatedrouter(7)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The OSPF Interface State.'
				     down (1),
				     loopback (2),
				     waiting (3),
				     pointToPoint (4),
				     designatedRouter (5),
				     backupDesignatedRouter (6),
				     otherDesignatedRouter (7)
		 "
	DEFVAL  { down }
	::= { wfOspfIfEntry 3 }

wfOspfIfIpAddress OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP address of this OSPF interface.'
		 "
	::= { wfOspfIfEntry 4 }

wfOspfAddressLessIf OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'For the purpose of easing the instancing of addressed
			    and addressless interfaces; This variable takes the
			    value 0 on interfaces with IP Addresses, and the
			    corresponding value of ifIndex for interfaces having no
			    IP Address.'
		 "
	::= { wfOspfIfEntry 5 }

wfOspfIfAreaId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'A 32-bit integer uniquely identifying the area to
			    which the interface connects.  Area ID 0.0.0.0 is used
			    for the OSPF backbone.'
			    default { '00000000'H }    -- 0.0.0.0
		 "
	::= { wfOspfIfEntry 6 }

wfOspfIfType OBJECT-TYPE
	SYNTAX  INTEGER {
		broadcast(1),
		nbma(2),
		pointtopoint(3)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The OSPF interface type.
			    By way of a default, this field may be intuited from
			    the corresponding value of ifType.  Broadcast LANs,
			    such as Ethernet and IEEE 802.5, take the value
			    'broadcast', X.25, Frame Relay, and similar
			    technologies take the value 'nbma', and links that are
			    definitively point to point take the value
			    'pointToPoint'.'
				     broadcast (1),
				     nbma (2),
				     pointToPoint (3)
		 "
	::= { wfOspfIfEntry 7 }

wfOspfIfRtrPriority OBJECT-TYPE
	SYNTAX  INTEGER {
		defval(1),
		maximum(255)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The priority of this interface.  Used in multi-access
			    networks, this field is used in the designated router
			    election algorithm.  The value 0 signifies that the
			    router is not eligible to become the designated router
			    on this particular network.  In the event of a tie in
			    this value, routers will use their router id as a tie
			    breaker.'
		 "
	DEFVAL  { defval }
	::= { wfOspfIfEntry 8 }

wfOspfIfTransitDelay OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		maximum(3600)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The estimated number of seconds it takes to transmit a
			    link- state update packet over this interface.'
		 "
	DEFVAL  { minimum }
	::= { wfOspfIfEntry 9 }

wfOspfIfRetransInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(5),
		maximum(3600)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of seconds between link-state advertisement
			    retransmissions, for adjacencies belonging to this
			    interface.  This value is also used when retransmitting
			    database description and link-state request packets.'
		 "
	DEFVAL  { defval }
	::= { wfOspfIfEntry 10 }

wfOspfIfHelloInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(10),
		maximum(65535)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The length of time, in seconds, between the Hello
			    packets that the router sends on the interface.  This
			    value must be the same for all routers attached to a
			    common network.'
		 "
	DEFVAL  { defval }
	::= { wfOspfIfEntry 11 }

wfOspfIfRtrDeadInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(40),
		maximum(2147483647)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of seconds that a router's Hello packets
			    have not been seen before it's neighbors declare the
			    router down.  This should be some multiple of the Hello
			    interval.  This value must be the same for all routers
			    attached to a common network.'
		 "
	DEFVAL  { defval }
	::= { wfOspfIfEntry 12 }

wfOspfIfPollInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(120),
		maximum(2147483647)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The larger time interval, in seconds, between the
			    Hello packets sent to an inactive non-broadcast multi-
			    access neighbor.'
		 "
	DEFVAL  { defval }
	::= { wfOspfIfEntry 13 }

wfOspfIfDesignatedRouter OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP Address of the Designated Router.'
			    default { '00000000'H }    -- 0.0.0.0
		 "
	::= { wfOspfIfEntry 14 }

wfOspfIfBackupDesignatedRouter OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP Address of the Backup Designated Router.'
			    default { '00000000'H }    -- 0.0.0.0
		 "
	::= { wfOspfIfEntry 15 }

wfOspfIfMetricCost OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		maximum(65535)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The cost of using this type of service on this
			    interface.  The default value of the TOS 0 Metric is
			    10^8 / ifSpeed.
			    The value FFFF is distinguished to mean 'no route via
			    this TOS'.'
		 "
	DEFVAL  { minimum }
	::= { wfOspfIfEntry 16 }

wfOspfIfAuthKey OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Authentication Key.  If the Area's Authorization
			    Type is simplePassword, and the key length is shorter
			    than 8 octets, the agent will left adjust and zero fill
			    to 8 octets.
			    When read, ospfIfAuthKey always returns an Octet String
			    of length zero.'
			    default  { '0000000000000000'H }    -- 0.0.0.0.0.0.0.0
			 REFERENCE
			    'OSPF Version 2, Section 9 The Interface Data
			    Structure'
		 "
	::= { wfOspfIfEntry 17 }

wfOspfIfTxHellos OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Hello packets transmitted.
		 "
	::= { wfOspfIfEntry 18 }

wfOspfIfTxDBDescripts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF DataBase Description packets transmitted.
		 "
	::= { wfOspfIfEntry 19 }

wfOspfIfTxLinkStateReqs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Request packets transmitted.
		 "
	::= { wfOspfIfEntry 20 }

wfOspfIfTxLinkStateUpds OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Update packets transmitted.
		 "
	::= { wfOspfIfEntry 21 }

wfOspfIfTxLinkStateAcks OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link States Acknowledgements transmitted.
		 "
	::= { wfOspfIfEntry 22 }

wfOspfIfRxHellos OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Hello packets received.
		 "
	::= { wfOspfIfEntry 23 }

wfOspfIfRxDBDescripts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF DataBase Description packets received.
		 "
	::= { wfOspfIfEntry 24 }

wfOspfIfRxLinkStateReqs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Requests received.
		 "
	::= { wfOspfIfEntry 25 }

wfOspfIfRxLinkStateUpds OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Updates received.
		 "
	::= { wfOspfIfEntry 26 }

wfOspfIfRxLinkStateAcks OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Acknowledgements received.
		 "
	::= { wfOspfIfEntry 27 }

wfOspfIfDrops OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF packets dropped because of invalid information
		     in the packet.
		 "
	::= { wfOspfIfEntry 28 }

wfOspfMtuSize OBJECT-TYPE
	SYNTAX  INTEGER {
		defval(1),
		min(2),
		maximum(10000)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    Configure MTU size per OSPF inreface
			"
	DEFVAL  { defval }
	::= { wfOspfIfEntry 29 }

wfOspfVirtIfTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfVirtIfEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --  OSPF Virtual Interface Table
		     --      The Virtual Interface Table describes the virtual
		     --      links that the OSPF Process is configured to
		     --      carry on.
			    'Information about this router's virtual interfaces.'
			 REFERENCE
			    'OSPF Version 2, Appendix C.4  Virtual link parameters'
		 "
	::= { wellfleet 3 5 3 2 3 6 }

wfOspfVirtIfEntry OBJECT-TYPE
	SYNTAX  WfOspfVirtIfEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'Information about a single Virtual Interface.'
		 "
	INDEX   { wfOspfVirtIfAreaID,
		wfOspfVirtIfNeighbor }
	::= { wfOspfVirtIfTable 1 }

WfOspfVirtIfEntry ::= SEQUENCE {
	wfOspfVirtIfDelete
		INTEGER,
	wfOspfVirtIfDisable
		INTEGER,
	wfOspfVirtIfState
		INTEGER,
	wfOspfVirtIfAreaID
		IpAddress,
	wfOspfVirtIfNeighbor
		IpAddress,
	wfOspfVirtIfTransitDelay
		INTEGER,
	wfOspfVirtIfRetransInterval
		INTEGER,
	wfOspfVirtIfHelloInterval
		INTEGER,
	wfOspfVirtIfRtrDeadInterval
		INTEGER,
	wfOspfVirtIfAuthKey
		OCTET STRING,
	wfOspfVirtIfTxHellos
		Counter,
	wfOspfVirtIfTxDBDescripts
		Counter,
	wfOspfVirtIfTxLinkStateReqs
		Counter,
	wfOspfVirtIfTxLinkStateUpds
		Counter,
	wfOspfVirtIfTxLinkStateAcks
		Counter,
	wfOspfVirtIfRxHellos
		Counter,
	wfOspfVirtIfRxDBDescripts
		Counter,
	wfOspfVirtIfRxLinkStateReqs
		Counter,
	wfOspfVirtIfRxLinkStateUpds
		Counter,
	wfOspfVirtIfRxLinkStateAcks
		Counter,
	wfOspfVirtIfDrops
		Counter
}

wfOspfVirtIfDelete OBJECT-TYPE
	SYNTAX  INTEGER {
		created(1),
		deleted(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		 "
	DEFVAL  { created }
	::= { wfOspfVirtIfEntry 1 }

wfOspfVirtIfDisable OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'This variable displays the validity or invalidity of
			    the entry.  Setting it to 'invalid' has the effect of
			    rendering it inoperative.  The internal effect (row
			    removal) is implementation dependent.'
		 "
	DEFVAL  { enabled }
	::= { wfOspfVirtIfEntry 2 }

wfOspfVirtIfState OBJECT-TYPE
	SYNTAX  INTEGER {
		down(1),
		pointtopoint(4)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'OSPF virtual interface states.'
				     down (1),               -- these use the same encoding
				     pointToPoint (4)        -- as the ospfIfTable
		 "
	DEFVAL  { down }
	::= { wfOspfVirtIfEntry 3 }

wfOspfVirtIfAreaID OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Transit Area that the Virtual Link traverses.  By
			    definition, this is not 0.0.0.0'
		 "
	::= { wfOspfVirtIfEntry 4 }

wfOspfVirtIfNeighbor OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Router ID of the Virtual Neighbor.'
		 "
	::= { wfOspfVirtIfEntry 5 }

wfOspfVirtIfTransitDelay OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		maximum(3600)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The estimated number of seconds it takes to transmit a
			    link- state update packet over this interface.'
		 "
	DEFVAL  { minimum }
	::= { wfOspfVirtIfEntry 6 }

wfOspfVirtIfRetransInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(5),
		maximum(3600)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of seconds between link-state advertisement
			    retransmissions, for adjacencies belonging to this
			    interface.  This value is also used when retransmitting
			    database description and link-state request packets.
			    This value should be well over the expected round-trip
			    time.'
		 "
	DEFVAL  { defval }
	::= { wfOspfVirtIfEntry 7 }

wfOspfVirtIfHelloInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(15),
		maximum(65535)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The length of time, in seconds, between the Hello
			    packets that the router sends on the interface.  This
			    value must be the same for the virtual neighbor.'
		 "
	DEFVAL  { defval }
	::= { wfOspfVirtIfEntry 8 }

wfOspfVirtIfRtrDeadInterval OBJECT-TYPE
	SYNTAX  INTEGER {
		minimum(1),
		defval(60),
		maximum(2147483647)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of seconds that a router's Hello packets
			    have not been seen before it's neighbors declare the
			    router down.  This should be some multiple of the Hello
			    interval.  This value must be the same for the virtual
			    neighbor.'
		 "
	DEFVAL  { defval }
	::= { wfOspfVirtIfEntry 9 }

wfOspfVirtIfAuthKey OBJECT-TYPE
	SYNTAX  OCTET STRING
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'If Authentication Type is simplePassword, the device
			    will left adjust and zero fill to 8 octets.
			    When read, ospfVifAuthKey always returns a string of
			    length zero.'
			 REFERENCE
			    'OSPF Version 2, Section 9 The Interface Data
			    Structure'
		 "
	::= { wfOspfVirtIfEntry 10 }

wfOspfVirtIfTxHellos OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Hello packets transmitted on
		     Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 11 }

wfOspfVirtIfTxDBDescripts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF DataBase Description packets transmitted
		     on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 12 }

wfOspfVirtIfTxLinkStateReqs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Request packets transmitted
		     on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 13 }

wfOspfVirtIfTxLinkStateUpds OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Update packets transmitted
		     on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 14 }

wfOspfVirtIfTxLinkStateAcks OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Acknowledgement packets
		     transmitted on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 15 }

wfOspfVirtIfRxHellos OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Hello packets received on
		     Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 16 }

wfOspfVirtIfRxDBDescripts OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF DataBase Description packets received
		     on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 17 }

wfOspfVirtIfRxLinkStateReqs OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Request packets recieved
		     on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 18 }

wfOspfVirtIfRxLinkStateUpds OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Update packets received
		     on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 19 }

wfOspfVirtIfRxLinkStateAcks OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF Link State Acknowledgement packets
		     received on Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 20 }

wfOspfVirtIfDrops OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
		     Number of OSPF packets dropped on
		     Virtual Interfaces.
		 "
	::= { wfOspfVirtIfEntry 21 }

wfOspfNbrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfNbrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --  OSPF Neighbor Table
		     --      The OSPF Neighbor Table describes all neighbors in
		     --      the locality of the subject router.
			    'A table of non-virtual neighbor information.'
			 REFERENCE
			    'OSPF Version 2, Section 10 The Neighbor Data
			    Structure'
		 "
	::= { wellfleet 3 5 3 2 3 7 }

wfOspfNbrEntry OBJECT-TYPE
	SYNTAX  WfOspfNbrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'The information regarding a single neighbor.'
			 REFERENCE
			    'OSPF Version 2, Section 10 The Neighbor Data
			    Structure'
		 "
	INDEX   { wfOspfNbrIpAddr,
		wfOspfNbrAddressLessIndex }
	::= { wfOspfNbrTable 1 }

WfOspfNbrEntry ::= SEQUENCE {
	wfOspfNbrDelete
		INTEGER,
	wfOspfNbrDisable
		INTEGER,
	wfOspfNbrState
		INTEGER,
	wfOspfNbrIpAddr
		IpAddress,
	wfOspfNbrIfAddr
		IpAddress,
	wfOspfNbrAddressLessIndex
		INTEGER,
	wfOspfNbrRtrId
		IpAddress,
	wfOspfNbrOptions
		INTEGER,
	wfOspfNbrPriority
		INTEGER,
	wfOspfNbrEvents
		Counter,
	wfOspfNbrLSRetransQLen
		Gauge
}

wfOspfNbrDelete OBJECT-TYPE
	SYNTAX  INTEGER {
		created(1),
		deleted(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
		     This variable indicates the existence of a static
		     OSPF neighbor.
		 "
	DEFVAL  { created }
	::= { wfOspfNbrEntry 1 }

wfOspfNbrDisable OBJECT-TYPE
	SYNTAX  INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'This variable displays the status of
			    the entry.  Setting it to 'DISABLED' has the effect of
			    rendering it inoperative.  The internal effect (row
			    removal) is implementation dependent.'
		 "
	DEFVAL  { enabled }
	::= { wfOspfNbrEntry 2 }

wfOspfNbrState OBJECT-TYPE
	SYNTAX  INTEGER {
		down(1),
		attempt(2),
		init(3),
		twoway(4),
		exchangstart(5),
		exchange(6),
		loading(7),
		full(8)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The State of the relationship with this Neighbor.'
			 REFERENCE
			    'OSPF Version 2, Section 10.1 Neighbor States'
				     down (1),
				     attempt (2),
				     init (3),
				     twoWay (4),
				     exchangeStart (5),
				     exchange (6),
				     loading (7),
				     full (8)
		 "
	DEFVAL  { down }
	::= { wfOspfNbrEntry 3 }

wfOspfNbrIpAddr OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP address of this neighbor.'
		 "
	::= { wfOspfNbrEntry 4 }

wfOspfNbrIfAddr OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Interface IP address for this neighbor.'
		 "
	::= { wfOspfNbrEntry 5 }

wfOspfNbrAddressLessIndex OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    ' On an interface having an IP Address, zero.  On
			    addressless interfaces, the corresponding value of
			    ifIndex in the Internet Standard MIB.  On row creation,
			    this can be derived from the instance.'
		 "
	::= { wfOspfNbrEntry 6 }

wfOspfNbrRtrId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A 32-bit integer (represented as a type IpAddress)
			    uniquely identifying the neighboring router in the
			    Autonomous System.'
			    default { '00000000'H }    -- 0.0.0.0
		 "
	::= { wfOspfNbrEntry 7 }

wfOspfNbrOptions OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A Bit Mask corresponding to the neighbor's options
			    field.
			    Bit 0, if set, indicates that the area accepts and
			    operates on external information; if zero, it is a stub
			    area.
			    Bit 1, if set, indicates that the system will operate
			    on Type of Service metrics other than TOS 0.  If zero,
			    the neighbor will ignore all metrics except the TOS 0
			    metric.'
			 REFERENCE
			    'OSPF Version 2, Section 12.1.2 Options'
		 "
	::= { wfOspfNbrEntry 8 }

wfOspfNbrPriority OBJECT-TYPE
	SYNTAX  INTEGER {
		defval(1),
		maximum(255)
	}
	ACCESS  read-write
	STATUS  mandatory
	DESCRIPTION
		"
			    'The priority of this neighbor in the designated router
			    election algorithm.  The value 0 signifies that the
			    neighbor is not eligible to become the designated
			    router on this particular network.'
		 "
	DEFVAL  { defval }
	::= { wfOspfNbrEntry 9 }

wfOspfNbrEvents OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of times this neighbor relationship has
			    changed state, or an error has occurred.'
		 "
	::= { wfOspfNbrEntry 10 }

wfOspfNbrLSRetransQLen OBJECT-TYPE
	SYNTAX  Gauge
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The current length of the retransmission queue.'
		 "
	::= { wfOspfNbrEntry 11 }

wfOspfVirtNbrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfVirtNbrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --  WFOSPF Virtual Neighbor Table
		     --      This table describes all virtual neighbors.
		     --      Since Virtual Links are configured in the
		     --      virtual interface table, this table is read-only.
			    'A table of virtual neighbor information.'
			 REFERENCE
			    'OSPF Version 2, '
		 "
	::= { wellfleet 3 5 3 2 3 8 }

wfOspfVirtNbrEntry OBJECT-TYPE
	SYNTAX  WfOspfVirtNbrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'Virtual neighbor information.'
			 REFERENCE
			    'OSPF Version 2, '
		 "
	INDEX   { wfOspfVirtNbrArea,
		wfOspfVirtNbrRtrId }
	::= { wfOspfVirtNbrTable 1 }

WfOspfVirtNbrEntry ::= SEQUENCE {
	wfOspfVirtNbrArea
		IpAddress,
	wfOspfVirtNbrRtrId
		IpAddress,
	wfOspfVirtNbrIpAddr
		IpAddress,
	wfOspfVirtNbrOptions
		INTEGER,
	wfOspfVirtNbrState
		INTEGER,
	wfOspfVirtNbrEvents
		Counter,
	wfOspfVirtNbrLSRetransQLen
		Gauge
}

wfOspfVirtNbrArea OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Transit Area Identifier.'
		 "
	::= { wfOspfVirtNbrEntry 1 }

wfOspfVirtNbrRtrId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A 32-bit integer uniquely identifying the neighboring
			    router in the Autonomous System.'
		 "
	::= { wfOspfVirtNbrEntry 2 }

wfOspfVirtNbrIpAddr OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP address this Virtual Neighbor is using.'
		 "
	::= { wfOspfVirtNbrEntry 3 }

wfOspfVirtNbrOptions OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A bit map corresponding to the neighbor's options
			    field.  Thus, Bit 1, if set, indicates that the
			    neighbor supports Type of Service Routing; if zero, no
			    metrics other than TOS 0 are in use by the neighbor.'
		 "
	::= { wfOspfVirtNbrEntry 4 }

wfOspfVirtNbrState OBJECT-TYPE
	SYNTAX  INTEGER {
		down(1),
		attempt(2),
		init(3),
		twoway(4),
		exchangstart(5),
		exchange(6),
		loading(7),
		full(8)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The state of the Virtual Neighbor Relationship.'
				     down (1),
				     attempt (2),
				     init (3),
				     twoWay (4),
				     exchangeStart (5),
				     exchange (6),
				     loading (7),
				     full (8)
		 "
	DEFVAL  { down }
	::= { wfOspfVirtNbrEntry 5 }

wfOspfVirtNbrEvents OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of times this virtual link has changed its
			    state, or an error has occurred.'
		 "
	::= { wfOspfVirtNbrEntry 6 }

wfOspfVirtNbrLSRetransQLen OBJECT-TYPE
	SYNTAX  Gauge
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The current length of the retransmission queue.'
		 "
	::= { wfOspfVirtNbrEntry 7 }

wfOspfDynNbrTable OBJECT-TYPE
	SYNTAX  SEQUENCE OF WfOspfDynNbrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
		     --  OSPF Dynamic Neighbor Table
		     --      The OSPF Dynamic Neighbor Table describes all neighbors in
		     --      the locality of the subject router learned during operation.
			    'A table of non-virtual neighbor information.'
			 REFERENCE
			    'OSPF Version 2, Section 10 The Neighbor Data
			    Structure'
		 "
	::= { wellfleet 3 5 3 2 3 9 }

wfOspfDynNbrEntry OBJECT-TYPE
	SYNTAX  WfOspfDynNbrEntry
	ACCESS  not-accessible
	STATUS  mandatory
	DESCRIPTION
		"
			    'The information regarding a single neighbor.'
			 REFERENCE
			    'OSPF Version 2, Section 10 The Neighbor Data
			    Structure'
		 "
	INDEX   { wfOspfDynNbrIpAddr,
		wfOspfDynNbrAddressLessIndex }
	::= { wfOspfDynNbrTable 1 }

WfOspfDynNbrEntry ::= SEQUENCE {
	wfOspfDynNbrState
		INTEGER,
	wfOspfDynNbrIpAddr
		IpAddress,
	wfOspfDynNbrIfAddr
		IpAddress,
	wfOspfDynNbrAddressLessIndex
		INTEGER,
	wfOspfDynNbrRtrId
		IpAddress,
	wfOspfDynNbrOptions
		INTEGER,
	wfOspfDynNbrPriority
		INTEGER,
	wfOspfDynNbrEvents
		Counter,
	wfOspfDynNbrLSRetransQLen
		Gauge
}

wfOspfDynNbrState OBJECT-TYPE
	SYNTAX  INTEGER {
		down(1),
		attempt(2),
		init(3),
		twoway(4),
		exchangstart(5),
		exchange(6),
		loading(7),
		full(8)
	}
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The State of the relationship with this Neighbor.'
			 REFERENCE
			    'OSPF Version 2, Section 10.1 Neighbor States'
				     down (1),
				     attempt (2),
				     init (3),
				     twoWay (4),
				     exchangeStart (5),
				     exchange (6),
				     loading (7),
				     full (8)
		 "
	DEFVAL  { down }
	::= { wfOspfDynNbrEntry 1 }

wfOspfDynNbrIpAddr OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The IP address of this neighbor.'
		 "
	::= { wfOspfDynNbrEntry 2 }

wfOspfDynNbrIfAddr OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The Interface IP address for this neighbor.'
		 "
	::= { wfOspfDynNbrEntry 3 }

wfOspfDynNbrAddressLessIndex OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    ' On an interface having an IP Address, zero.  On
			    addressless interfaces, the corresponding value of
			    ifIndex in the Internet Standard MIB.  On row creation,
			    this can be derived from the instance.'
		 "
	::= { wfOspfDynNbrEntry 4 }

wfOspfDynNbrRtrId OBJECT-TYPE
	SYNTAX  IpAddress
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A 32-bit integer (represented as a type IpAddress)
			    uniquely identifying the neighboring router in the
			    Autonomous System.'
			    default { '00000000'H }    -- 0.0.0.0
		 "
	::= { wfOspfDynNbrEntry 5 }

wfOspfDynNbrOptions OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'A Bit Mask corresponding to the neighbor's options
			    field.
			    Bit 0, if set, indicates that the area accepts and
			    operates on external information; if zero, it is a stub
			    area.
			    Bit 1, if set, indicates that the system will operate
			    on Type of Service metrics other than TOS 0.  If zero,
			    the neighbor will ignore all metrics except the TOS 0
			    metric.'
			 REFERENCE
			    'OSPF Version 2, Section 12.1.2 Options'
		 "
	::= { wfOspfDynNbrEntry 6 }

wfOspfDynNbrPriority OBJECT-TYPE
	SYNTAX  INTEGER
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The priority of this neighbor in the designated router
			    election algorithm.  The value 0 signifies that the
			    neighbor is not eligible to become the designated
			    router on this particular network.'
		 "
	::= { wfOspfDynNbrEntry 7 }

wfOspfDynNbrEvents OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The number of times this neighbor relationship has
			    changed state, or an error has occurred.'
		 "
	::= { wfOspfDynNbrEntry 8 }

wfOspfDynNbrLSRetransQLen OBJECT-TYPE
	SYNTAX  Gauge
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"
			    'The current length of the retransmission queue.'
		 "
	::= { wfOspfDynNbrEntry 9 }

END